diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/Makefile | 2 | ||||
| -rw-r--r-- | drivers/i2c/fti2c010.c | 352 | ||||
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/s3c24x0_i2c.c | 284 | ||||
| -rw-r--r-- | drivers/mmc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mmc/dw_mmc.c | 23 | ||||
| -rw-r--r-- | drivers/mmc/exynos_dw_mmc.c | 14 | ||||
| -rw-r--r-- | drivers/mmc/fsl_esdhc_spl.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/ftsdc021_sdhci.c | 33 | ||||
| -rw-r--r-- | drivers/mtd/spi/fsl_espi_spl.c | 5 | ||||
| -rw-r--r-- | drivers/spi/bfin_spi.c | 17 | ||||
| -rw-r--r-- | drivers/spi/bfin_spi6xx.c | 5 |
12 files changed, 466 insertions, 281 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 553b519..fa3a875 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_I2C_MV) += mv_i2c.o obj-$(CONFIG_I2C_MXS) += mxs_i2c.o obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o -obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o obj-$(CONFIG_U8500_I2C) += u8500_i2c.o obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o @@ -24,6 +23,7 @@ obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o +obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o diff --git a/drivers/i2c/fti2c010.c b/drivers/i2c/fti2c010.c index ddeb941..fb9fa35 100644 --- a/drivers/i2c/fti2c010.c +++ b/drivers/i2c/fti2c010.c @@ -13,67 +13,78 @@ #include "fti2c010.h" -#ifndef CONFIG_HARD_I2C -#error "fti2c010: CONFIG_HARD_I2C is not defined" +#ifndef CONFIG_SYS_I2C_SPEED +#define CONFIG_SYS_I2C_SPEED 5000 #endif -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 +#ifndef CONFIG_SYS_I2C_SLAVE +#define CONFIG_SYS_I2C_SLAVE 0 #endif -#ifndef CONFIG_FTI2C010_FREQ -#define CONFIG_FTI2C010_FREQ clk_get_rate("I2C") +#ifndef CONFIG_FTI2C010_CLOCK +#define CONFIG_FTI2C010_CLOCK clk_get_rate("I2C") #endif -/* command timeout */ -#define CFG_CMD_TIMEOUT 10 /* ms */ +#ifndef CONFIG_FTI2C010_TIMEOUT +#define CONFIG_FTI2C010_TIMEOUT 10 /* ms */ +#endif -/* 7-bit chip address + 1-bit read/write */ -#define I2C_RD(chip) ((((chip) << 1) & 0xff) | 1) -#define I2C_WR(chip) (((chip) << 1) & 0xff) +/* 7-bit dev address + 1-bit read/write */ +#define I2C_RD(dev) ((((dev) << 1) & 0xfe) | 1) +#define I2C_WR(dev) (((dev) << 1) & 0xfe) struct fti2c010_chip { - void __iomem *regs; - uint bus; - uint speed; + struct fti2c010_regs *regs; }; static struct fti2c010_chip chip_list[] = { { - .bus = 0, - .regs = (void __iomem *)CONFIG_FTI2C010_BASE, + .regs = (struct fti2c010_regs *)CONFIG_FTI2C010_BASE, }, -#ifdef CONFIG_I2C_MULTI_BUS -# ifdef CONFIG_FTI2C010_BASE1 +#ifdef CONFIG_FTI2C010_BASE1 { - .bus = 1, - .regs = (void __iomem *)CONFIG_FTI2C010_BASE1, + .regs = (struct fti2c010_regs *)CONFIG_FTI2C010_BASE1, }, -# endif -# ifdef CONFIG_FTI2C010_BASE2 +#endif +#ifdef CONFIG_FTI2C010_BASE2 { - .bus = 2, - .regs = (void __iomem *)CONFIG_FTI2C010_BASE2, + .regs = (struct fti2c010_regs *)CONFIG_FTI2C010_BASE2, }, -# endif -# ifdef CONFIG_FTI2C010_BASE3 +#endif +#ifdef CONFIG_FTI2C010_BASE3 { - .bus = 3, - .regs = (void __iomem *)CONFIG_FTI2C010_BASE3, + .regs = (struct fti2c010_regs *)CONFIG_FTI2C010_BASE3, }, -# endif -#endif /* #ifdef CONFIG_I2C_MULTI_BUS */ +#endif }; -static struct fti2c010_chip *curr = chip_list; +static int fti2c010_reset(struct fti2c010_chip *chip) +{ + ulong ts; + int ret = -1; + struct fti2c010_regs *regs = chip->regs; + + writel(CR_I2CRST, ®s->cr); + for (ts = get_timer(0); get_timer(ts) < CONFIG_FTI2C010_TIMEOUT; ) { + if (!(readl(®s->cr) & CR_I2CRST)) { + ret = 0; + break; + } + } -static int fti2c010_wait(uint32_t mask) + if (ret) + printf("fti2c010: reset timeout\n"); + + return ret; +} + +static int fti2c010_wait(struct fti2c010_chip *chip, uint32_t mask) { int ret = -1; uint32_t stat, ts; - struct fti2c010_regs *regs = curr->regs; + struct fti2c010_regs *regs = chip->regs; - for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + for (ts = get_timer(0); get_timer(ts) < CONFIG_FTI2C010_TIMEOUT; ) { stat = readl(®s->sr); if ((stat & mask) == mask) { ret = 0; @@ -84,88 +95,124 @@ static int fti2c010_wait(uint32_t mask) return ret; } -/* - * u-boot I2C API - */ +static unsigned int set_i2c_bus_speed(struct fti2c010_chip *chip, + unsigned int speed) +{ + struct fti2c010_regs *regs = chip->regs; + unsigned int clk = CONFIG_FTI2C010_CLOCK; + unsigned int gsr = 0; + unsigned int tsr = 32; + unsigned int div, rate; + + for (div = 0; div < 0x3ffff; ++div) { + /* SCLout = PCLK/(2*(COUNT + 2) + GSR) */ + rate = clk / (2 * (div + 2) + gsr); + if (rate <= speed) + break; + } + + writel(TGSR_GSR(gsr) | TGSR_TSR(tsr), ®s->tgsr); + writel(CDR_DIV(div), ®s->cdr); + + return rate; +} /* * Initialization, must be called once on start up, may be called * repeatedly to change the speed and slave addresses. */ -void i2c_init(int speed, int slaveaddr) +static void fti2c010_init(struct i2c_adapter *adap, int speed, int slaveaddr) { - if (speed || !curr->speed) - i2c_set_bus_speed(speed); + struct fti2c010_chip *chip = chip_list + adap->hwadapnr; - /* if slave mode disabled */ - if (!slaveaddr) + if (adap->init_done) return; - /* - * TODO: - * Implement slave mode, but is it really necessary? - */ +#ifdef CONFIG_SYS_I2C_INIT_BOARD + /* Call board specific i2c bus reset routine before accessing the + * environment, which might be in a chip on that bus. For details + * about this problem see doc/I2C_Edge_Conditions. + */ + i2c_init_board(); +#endif + + /* master init */ + + fti2c010_reset(chip); + + set_i2c_bus_speed(chip, speed); + + /* slave init, don't care */ + +#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT + /* Call board specific i2c bus reset routine AFTER the bus has been + * initialized. Use either this callpoint or i2c_init_board; + * which is called before fti2c010_init operations. + * For details about this problem see doc/I2C_Edge_Conditions. + */ + i2c_board_late_init(); +#endif } /* * Probe the given I2C chip address. Returns 0 if a chip responded, * not 0 on failure. */ -int i2c_probe(uchar chip) +static int fti2c010_probe(struct i2c_adapter *adap, u8 dev) { + struct fti2c010_chip *chip = chip_list + adap->hwadapnr; + struct fti2c010_regs *regs = chip->regs; int ret; - struct fti2c010_regs *regs = curr->regs; - - i2c_init(0, 0); /* 1. Select slave device (7bits Address + 1bit R/W) */ - writel(I2C_WR(chip), ®s->dr); + writel(I2C_WR(dev), ®s->dr); writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) return ret; /* 2. Select device register */ writel(0, ®s->dr); writel(CR_ENABLE | CR_TBEN, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); return ret; } -/* - * Read/Write interface: - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one - * register) - * buffer: Where to read/write the data - * len: How many bytes to read/write - * - * Returns: 0 on success, not 0 on failure - */ -int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) +static void to_i2c_addr(u8 *buf, uint32_t addr, int alen) +{ + int i, shift; + + if (!buf || alen <= 0) + return; + + /* MSB first */ + i = 0; + shift = (alen - 1) * 8; + while (alen-- > 0) { + buf[i] = (u8)(addr >> shift); + shift -= 8; + } +} + +static int fti2c010_read(struct i2c_adapter *adap, + u8 dev, uint addr, int alen, uchar *buf, int len) { + struct fti2c010_chip *chip = chip_list + adap->hwadapnr; + struct fti2c010_regs *regs = chip->regs; int ret, pos; uchar paddr[4]; - struct fti2c010_regs *regs = curr->regs; - i2c_init(0, 0); - - paddr[0] = (addr >> 0) & 0xFF; - paddr[1] = (addr >> 8) & 0xFF; - paddr[2] = (addr >> 16) & 0xFF; - paddr[3] = (addr >> 24) & 0xFF; + to_i2c_addr(paddr, addr, alen); /* * Phase A. Set register address */ /* A.1 Select slave device (7bits Address + 1bit R/W) */ - writel(I2C_WR(chip), ®s->dr); + writel(I2C_WR(dev), ®s->dr); writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) return ret; @@ -175,7 +222,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) writel(paddr[pos], ®s->dr); writel(ctrl, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) return ret; } @@ -185,9 +232,9 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) */ /* B.1 Select slave device (7bits Address + 1bit R/W) */ - writel(I2C_RD(chip), ®s->dr); + writel(I2C_RD(dev), ®s->dr); writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) return ret; @@ -201,7 +248,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) stat |= SR_ACK; } writel(ctrl, ®s->cr); - ret = fti2c010_wait(stat); + ret = fti2c010_wait(chip, stat); if (ret) break; buf[pos] = (uchar)(readl(®s->dr) & 0xFF); @@ -210,39 +257,24 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) return ret; } -/* - * Read/Write interface: - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one - * register) - * buffer: Where to read/write the data - * len: How many bytes to read/write - * - * Returns: 0 on success, not 0 on failure - */ -int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) +static int fti2c010_write(struct i2c_adapter *adap, + u8 dev, uint addr, int alen, u8 *buf, int len) { + struct fti2c010_chip *chip = chip_list + adap->hwadapnr; + struct fti2c010_regs *regs = chip->regs; int ret, pos; uchar paddr[4]; - struct fti2c010_regs *regs = curr->regs; - i2c_init(0, 0); - - paddr[0] = (addr >> 0) & 0xFF; - paddr[1] = (addr >> 8) & 0xFF; - paddr[2] = (addr >> 16) & 0xFF; - paddr[3] = (addr >> 24) & 0xFF; + to_i2c_addr(paddr, addr, alen); /* * Phase A. Set register address * * A.1 Select slave device (7bits Address + 1bit R/W) */ - writel(I2C_WR(chip), ®s->dr); + writel(I2C_WR(dev), ®s->dr); writel(CR_ENABLE | CR_TBEN | CR_START, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) return ret; @@ -252,7 +284,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) writel(paddr[pos], ®s->dr); writel(ctrl, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) return ret; } @@ -267,7 +299,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) ctrl |= CR_STOP; writel(buf[pos], ®s->dr); writel(ctrl, ®s->cr); - ret = fti2c010_wait(SR_DT); + ret = fti2c010_wait(chip, SR_DT); if (ret) break; } @@ -275,94 +307,40 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) return ret; } -/* - * Functions for setting the current I2C bus and its speed - */ -#ifdef CONFIG_I2C_MULTI_BUS - -/* - * i2c_set_bus_num: - * - * Change the active I2C bus. Subsequent read/write calls will - * go to this one. - * - * bus - bus index, zero based - * - * Returns: 0 on success, not 0 on failure - */ -int i2c_set_bus_num(uint bus) -{ - if (bus >= ARRAY_SIZE(chip_list)) - return -1; - curr = chip_list + bus; - i2c_init(0, 0); - return 0; -} - -/* - * i2c_get_bus_num: - * - * Returns index of currently active I2C bus. Zero-based. - */ - -uint i2c_get_bus_num(void) -{ - return curr->bus; -} - -#endif /* #ifdef CONFIG_I2C_MULTI_BUS */ - -/* - * i2c_set_bus_speed: - * - * Change the speed of the active I2C bus - * - * speed - bus speed in Hz - * - * Returns: 0 on success, not 0 on failure - */ -int i2c_set_bus_speed(uint speed) +static unsigned int fti2c010_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) { - struct fti2c010_regs *regs = curr->regs; - uint clk = CONFIG_FTI2C010_FREQ; - uint gsr = 0, tsr = 32; - uint spd, div; - - if (!speed) - speed = CONFIG_SYS_I2C_SPEED; - - for (div = 0; div < 0x3ffff; ++div) { - /* SCLout = PCLK/(2*(COUNT + 2) + GSR) */ - spd = clk / (2 * (div + 2) + gsr); - if (spd <= speed) - break; - } - - if (curr->speed == spd) - return 0; - - writel(CR_I2CRST, ®s->cr); - mdelay(100); - if (readl(®s->cr) & CR_I2CRST) { - printf("fti2c010: reset timeout\n"); - return -1; - } + struct fti2c010_chip *chip = chip_list + adap->hwadapnr; + int ret; - curr->speed = spd; + fti2c010_reset(chip); + ret = set_i2c_bus_speed(chip, speed); - writel(TGSR_GSR(gsr) | TGSR_TSR(tsr), ®s->tgsr); - writel(CDR_DIV(div), ®s->cdr); - - return 0; + return ret; } /* - * i2c_get_bus_speed: - * - * Returns speed of currently active I2C bus in Hz + * Register i2c adapters */ - -uint i2c_get_bus_speed(void) -{ - return curr->speed; -} +U_BOOT_I2C_ADAP_COMPLETE(i2c_0, fti2c010_init, fti2c010_probe, fti2c010_read, + fti2c010_write, fti2c010_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + 0) +#ifdef CONFIG_FTI2C010_BASE1 +U_BOOT_I2C_ADAP_COMPLETE(i2c_1, fti2c010_init, fti2c010_probe, fti2c010_read, + fti2c010_write, fti2c010_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + 1) +#endif +#ifdef CONFIG_FTI2C010_BASE2 +U_BOOT_I2C_ADAP_COMPLETE(i2c_2, fti2c010_init, fti2c010_probe, fti2c010_read, + fti2c010_write, fti2c010_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + 2) +#endif +#ifdef CONFIG_FTI2C010_BASE3 +U_BOOT_I2C_ADAP_COMPLETE(i2c_3, fti2c010_init, fti2c010_probe, fti2c010_read, + fti2c010_write, fti2c010_set_bus_speed, + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, + 3) +#endif diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 3d38c03..c784004 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -158,7 +158,6 @@ static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) udelay(1000); flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); - writew(0, &i2c_base->cnt); } static void flush_fifo(struct i2c_adapter *adap) @@ -198,8 +197,6 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip) return res; /* No data transfer, slave addr only */ - writew(0, &i2c_base->cnt); - /* Set slave address */ writew(chip, &i2c_base->sa); /* Stop bit needed here */ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | @@ -234,7 +231,6 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip) pr_exit: flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); - writew(0, &i2c_base->cnt); return res; } @@ -372,7 +368,6 @@ static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, rd_exit: flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); - writew(0, &i2c_base->cnt); return i2c_error; } @@ -473,7 +468,6 @@ static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, wr_exit: flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); - writew(0, &i2c_base->cnt); return i2c_error; } diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index f77a9d1..fd328f0 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -23,8 +23,6 @@ #include <i2c.h> #include "s3c24x0_i2c.h" -#ifdef CONFIG_HARD_I2C - #define I2C_WRITE 0 #define I2C_READ 1 @@ -127,7 +125,6 @@ * For SPL boot some boards need i2c before SDRAM is initialised so force * variables to live in SRAM */ -static unsigned int g_current_bus __attribute__((section(".data"))); static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM] __attribute__((section(".data"))); @@ -254,17 +251,17 @@ static void ReadWriteByte(struct s3c24x0_i2c *i2c) writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } -static struct s3c24x0_i2c *get_base_i2c(void) +static struct s3c24x0_i2c *get_base_i2c(int bus) { #ifdef CONFIG_EXYNOS4 struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + (EXYNOS4_I2C_SPACING - * g_current_bus)); + * bus)); return i2c; #elif defined CONFIG_EXYNOS5 struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + (EXYNOS5_I2C_SPACING - * g_current_bus)); + * bus)); return i2c; #else return s3c24x0_get_base_i2c(); @@ -298,7 +295,6 @@ static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); } -#ifdef CONFIG_I2C_MULTI_BUS static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus) { struct exynos5_hsi2c *hsregs = i2c_bus->hsregs; @@ -307,8 +303,10 @@ static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus) unsigned int i = 0, utemp0 = 0, utemp1 = 0; unsigned int t_ftl_cycle; -#if defined CONFIG_EXYNOS5 +#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) clkin = get_i2c_clk(); +#else + clkin = get_PCLK(); #endif /* FPCLK / FI2C = * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE @@ -330,7 +328,6 @@ static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus) } return -1; } -#endif static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus) { @@ -401,49 +398,18 @@ static void exynos5_i2c_reset(struct s3c24x0_i2c_bus *i2c_bus) hsi2c_ch_init(i2c_bus); } -/* - * MULTI BUS I2C support - */ - -#ifdef CONFIG_I2C_MULTI_BUS -int i2c_set_bus_num(unsigned int bus) -{ - struct s3c24x0_i2c_bus *i2c_bus; - - i2c_bus = get_bus(bus); - if (!i2c_bus) - return -1; - g_current_bus = bus; - - if (i2c_bus->is_highspeed) { - if (hsi2c_get_clk_details(i2c_bus)) - return -1; - hsi2c_ch_init(i2c_bus); - } else { - i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency, - CONFIG_SYS_I2C_SLAVE); - } - - return 0; -} - -unsigned int i2c_get_bus_num(void) -{ - return g_current_bus; -} -#endif - -void i2c_init(int speed, int slaveadd) +static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { struct s3c24x0_i2c *i2c; + struct s3c24x0_i2c_bus *bus; + #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #endif ulong start_time = get_timer(0); /* By default i2c channel 0 is the current bus */ - g_current_bus = 0; - i2c = get_base_i2c(); + i2c = get_base_i2c(adap->hwadapnr); /* * In case the previous transfer is still going, wait to give it a @@ -505,6 +471,10 @@ void i2c_init(int speed, int slaveadd) } #endif /* #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) */ i2c_ch_init(i2c, speed, slaveadd); + + bus = &i2c_bus[adap->hwadapnr]; + bus->active = true; + bus->regs = i2c; } /* @@ -728,6 +698,40 @@ static int hsi2c_read(struct exynos5_hsi2c *i2c, return rv; } +static unsigned int s3c24x0_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) +{ + struct s3c24x0_i2c_bus *i2c_bus; + + i2c_bus = get_bus(adap->hwadapnr); + if (!i2c_bus) + return -1; + + i2c_bus->clock_frequency = speed; + + if (i2c_bus->is_highspeed) { + if (hsi2c_get_clk_details(i2c_bus)) + return -1; + hsi2c_ch_init(i2c_bus); + } else { + i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency, + CONFIG_SYS_I2C_S3C24X0_SLAVE); + } + + return 0; +} + +#ifdef CONFIG_EXYNOS5 +static void exynos_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) +{ + /* This will override the speed selected in the fdt for that port */ + debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr); + if (i2c_set_bus_speed(speed)) + printf("i2c_init: failed to init bus %d for speed = %d\n", + adap->hwadapnr, speed); +} +#endif + /* * cmd_type is 0 for write, 1 for read. * @@ -840,13 +844,13 @@ bailout: return result; } -int i2c_probe(uchar chip) +static int s3c24x0_i2c_probe(struct i2c_adapter *adap, uchar chip) { struct s3c24x0_i2c_bus *i2c_bus; uchar buf[1]; int ret; - i2c_bus = get_bus(g_current_bus); + i2c_bus = get_bus(adap->hwadapnr); if (!i2c_bus) return -1; buf[0] = 0; @@ -864,11 +868,11 @@ int i2c_probe(uchar chip) I2C_READ, chip << 1, 0, 0, buf, 1); } - return ret != I2C_OK; } -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int s3c24x0_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { struct s3c24x0_i2c_bus *i2c_bus; uchar xaddr[4]; @@ -902,7 +906,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - i2c_bus = get_bus(g_current_bus); + i2c_bus = get_bus(adap->hwadapnr); if (!i2c_bus) return -1; @@ -922,7 +926,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int s3c24x0_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { struct s3c24x0_i2c_bus *i2c_bus; uchar xaddr[4]; @@ -955,7 +960,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - i2c_bus = get_bus(g_current_bus); + i2c_bus = get_bus(adap->hwadapnr); if (!i2c_bus) return -1; @@ -1001,8 +1006,8 @@ static void process_nodes(const void *blob, int node_list[], int count, bus->id = pinmux_decode_periph_id(blob, node); bus->clock_frequency = fdtdec_get_int(blob, node, - "clock-frequency", - CONFIG_SYS_I2C_SPEED); + "clock-frequency", + CONFIG_SYS_I2C_S3C24X0_SPEED); bus->node = node; bus->bus_num = i; exynos_pinmux_config(bus->id, 0); @@ -1044,7 +1049,6 @@ int i2c_get_bus_num_fdt(int node) return -1; } -#ifdef CONFIG_I2C_MULTI_BUS int i2c_reset_port_fdt(const void *blob, int node) { struct s3c24x0_i2c_bus *i2c_bus; @@ -1068,12 +1072,178 @@ int i2c_reset_port_fdt(const void *blob, int node) hsi2c_ch_init(i2c_bus); } else { i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency, - CONFIG_SYS_I2C_SLAVE); + CONFIG_SYS_I2C_S3C24X0_SLAVE); } return 0; } #endif -#endif -#endif /* CONFIG_HARD_I2C */ +/* + * Register s3c24x0 i2c adapters + */ +#if defined(CONFIG_EXYNOS5420) +U_BOOT_I2C_ADAP_COMPLETE(i2c00, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0) +U_BOOT_I2C_ADAP_COMPLETE(i2c01, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 1) +U_BOOT_I2C_ADAP_COMPLETE(i2c02, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 2) +U_BOOT_I2C_ADAP_COMPLETE(i2c03, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 3) +U_BOOT_I2C_ADAP_COMPLETE(i2c04, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 4) +U_BOOT_I2C_ADAP_COMPLETE(i2c05, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 5) +U_BOOT_I2C_ADAP_COMPLETE(i2c06, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 6) +U_BOOT_I2C_ADAP_COMPLETE(i2c07, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 7) +U_BOOT_I2C_ADAP_COMPLETE(i2c08, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 8) +U_BOOT_I2C_ADAP_COMPLETE(i2c09, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 9) +U_BOOT_I2C_ADAP_COMPLETE(i2c10, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 10) +#elif defined(CONFIG_EXYNOS5250) +U_BOOT_I2C_ADAP_COMPLETE(i2c00, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0) +U_BOOT_I2C_ADAP_COMPLETE(i2c01, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 1) +U_BOOT_I2C_ADAP_COMPLETE(i2c02, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 2) +U_BOOT_I2C_ADAP_COMPLETE(i2c03, exynos_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 3) +U_BOOT_I2C_ADAP_COMPLETE(i2c04, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 4) +U_BOOT_I2C_ADAP_COMPLETE(i2c05, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 5) +U_BOOT_I2C_ADAP_COMPLETE(i2c06, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 6) +U_BOOT_I2C_ADAP_COMPLETE(i2c07, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 7) +U_BOOT_I2C_ADAP_COMPLETE(i2c08, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 8) +U_BOOT_I2C_ADAP_COMPLETE(i2c09, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 9) +U_BOOT_I2C_ADAP_COMPLETE(s3c10, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 10) +#elif defined(CONFIG_EXYNOS4) +U_BOOT_I2C_ADAP_COMPLETE(i2c00, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0) +U_BOOT_I2C_ADAP_COMPLETE(i2c01, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 1) +U_BOOT_I2C_ADAP_COMPLETE(i2c02, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 2) +U_BOOT_I2C_ADAP_COMPLETE(i2c03, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 3) +U_BOOT_I2C_ADAP_COMPLETE(i2c04, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 4) +U_BOOT_I2C_ADAP_COMPLETE(i2c05, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 5) +U_BOOT_I2C_ADAP_COMPLETE(i2c06, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 6) +U_BOOT_I2C_ADAP_COMPLETE(i2c07, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 7) +U_BOOT_I2C_ADAP_COMPLETE(i2c08, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 8) +#else +U_BOOT_I2C_ADAP_COMPLETE(s3c0, s3c24x0_i2c_init, s3c24x0_i2c_probe, + s3c24x0_i2c_read, s3c24x0_i2c_write, + s3c24x0_i2c_set_bus_speed, + CONFIG_SYS_I2C_S3C24X0_SPEED, + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0) +#endif diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index a7ae38d..1ed26ca 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o +obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o obj-$(CONFIG_GENERIC_MMC) += mmc.o obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 1e0f72b..19d9b0b 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -11,7 +11,6 @@ #include <mmc.h> #include <dwmmc.h> #include <asm-generic/errno.h> -#include <asm/arch/dwmmc.h> #define PAGE_SIZE 4096 @@ -300,17 +299,9 @@ static void dwmci_set_ios(struct mmc *mmc) static int dwmci_init(struct mmc *mmc) { struct dwmci_host *host = (struct dwmci_host *)mmc->priv; - u32 fifo_size; - - if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) { - dwmci_writel(host, EMMCP_MPSBEGIN0, 0); - dwmci_writel(host, EMMCP_SEND0, 0); - dwmci_writel(host, EMMCP_CTRL0, - MPSCTRL_SECURE_READ_BIT | - MPSCTRL_SECURE_WRITE_BIT | - MPSCTRL_NON_SECURE_READ_BIT | - MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID); - } + + if (host->board_init) + host->board_init(host); dwmci_writel(host, DWMCI_PWREN, 1); @@ -330,13 +321,9 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_IDINTEN, 0); dwmci_writel(host, DWMCI_BMOD, 1); - if (!host->fifoth_val) { - fifo_size = dwmci_readl(host, DWMCI_FIFOTH); - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; - host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | - TX_WMARK(fifo_size / 2); + if (host->fifoth_val) { + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); } - dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); dwmci_writel(host, DWMCI_CLKENA, 0); dwmci_writel(host, DWMCI_CLKSRC, 0); diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index a0f1511..b3e5c5e 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -34,6 +34,19 @@ unsigned int exynos_dwmci_get_clk(int dev_index) return get_mmc_clk(dev_index); } +static void exynos_dwmci_board_init(struct dwmci_host *host) +{ + if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) { + dwmci_writel(host, EMMCP_MPSBEGIN0, 0); + dwmci_writel(host, EMMCP_SEND0, 0); + dwmci_writel(host, EMMCP_CTRL0, + MPSCTRL_SECURE_READ_BIT | + MPSCTRL_SECURE_WRITE_BIT | + MPSCTRL_NON_SECURE_READ_BIT | + MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID); + } +} + /* * This function adds the mmc channel to be registered with mmc core. * index - mmc channel number. @@ -65,6 +78,7 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) #ifdef CONFIG_EXYNOS5420 host->quirks = DWMCI_QUIRK_DISABLE_SMU; #endif + host->board_init = exynos_dwmci_board_init; if (clksel) { host->clksel_val = clksel; diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c index 65c52a2..8fc263f 100644 --- a/drivers/mmc/fsl_esdhc_spl.c +++ b/drivers/mmc/fsl_esdhc_spl.c @@ -42,6 +42,10 @@ void __noreturn mmc_boot(void) hang(); } +#ifdef CONFIG_FSL_CORENET + offset = CONFIG_SYS_MMC_U_BOOT_OFFS; + code_len = CONFIG_SYS_MMC_U_BOOT_SIZE; +#else blklen = mmc->read_bl_len; tmp_buf = malloc(blklen); if (!tmp_buf) { @@ -91,6 +95,7 @@ void __noreturn mmc_boot(void) /* * Load U-Boot image from mmc into RAM */ +#endif blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len; err = mmc->block_dev.block_read(0, blk_start, blk_cnt, diff --git a/drivers/mmc/ftsdc021_sdhci.c b/drivers/mmc/ftsdc021_sdhci.c new file mode 100644 index 0000000..1f6cdba --- /dev/null +++ b/drivers/mmc/ftsdc021_sdhci.c @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2013 Faraday Technology + * Kuo-Jung Su <dantesu@faraday-tech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +#ifndef CONFIG_FTSDC021_CLOCK +#define CONFIG_FTSDC021_CLOCK clk_get_rate("MMC") +#endif + +int ftsdc021_sdhci_init(u32 regbase) +{ + struct sdhci_host *host = NULL; + uint32_t freq = CONFIG_FTSDC021_CLOCK; + + host = calloc(1, sizeof(struct sdhci_host)); + if (!host) { + puts("sdh_host malloc fail!\n"); + return 1; + } + + host->name = "FTSDC021"; + host->ioaddr = (void __iomem *)regbase; + host->quirks = 0; + add_sdhci(host, freq, 0); + + return 0; +} diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c index 6263d8c..e5ac79b 100644 --- a/drivers/mtd/spi/fsl_espi_spl.c +++ b/drivers/mtd/spi/fsl_espi_spl.c @@ -31,6 +31,10 @@ void spi_boot(void) hang(); } +#ifdef CONFIG_FSL_CORENET + offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; + code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE; +#else /* * Load U-Boot image from SPI flash into RAM */ @@ -50,6 +54,7 @@ void spi_boot(void) code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE); /* Skip spl code */ code_len = code_len - CONFIG_SPL_MAX_SIZE; +#endif /* copy code to DDR */ spi_flash_read(flash, offset, code_len, (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST); diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index bb88f30..aa89d89 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -162,21 +162,22 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) { - debug("%s: invalid bus %u\n", __func__, bus); - return NULL; - } switch (bus) { #ifdef SPI0_CTL - case 0: mmr_base = SPI0_CTL; break; + case 0: + mmr_base = SPI0_CTL; break; #endif #ifdef SPI1_CTL - case 1: mmr_base = SPI1_CTL; break; + case 1: + mmr_base = SPI1_CTL; break; #endif #ifdef SPI2_CTL - case 2: mmr_base = SPI2_CTL; break; + case 2: + mmr_base = SPI2_CTL; break; #endif - default: return NULL; + default: + debug("%s: invalid bus %u\n", __func__, bus); + return NULL; } bss = spi_alloc_slave(struct bfin_spi_slave, bus, cs); diff --git a/drivers/spi/bfin_spi6xx.c b/drivers/spi/bfin_spi6xx.c index c25c4a9..07b833d 100644 --- a/drivers/spi/bfin_spi6xx.c +++ b/drivers/spi/bfin_spi6xx.c @@ -154,10 +154,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; - if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) { - debug("%s: invalid bus %u\n", __func__, bus); - return NULL; - } switch (bus) { #ifdef SPI0_REGBASE case 0: @@ -175,6 +171,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, break; #endif default: + debug("%s: invalid bus %u\n", __func__, bus); return NULL; } |