summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/rtl8139.c49
1 files changed, 19 insertions, 30 deletions
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index c2779db..e3feef8 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -95,10 +95,9 @@
#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
-#undef DEBUG_TX
-#undef DEBUG_RX
+#define DEBUG_TX 0 /* set to 1 to enable debug code */
+#define DEBUG_RX 0 /* set to 1 to enable debug code */
-#define currticks() get_timer(0)
#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
@@ -253,7 +252,6 @@ int rtl8139_initialize(bd_t *bis)
static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
{
int i;
- int speed10, fullduplex;
int addr_len;
unsigned short *ap = (unsigned short *)dev->enetaddr;
@@ -266,9 +264,6 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
for (i = 0; i < 3; i++)
*ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len));
- speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10;
- fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex;
-
rtl_reset(dev);
if (inb(ioaddr + MediaStatus) & MSRLinkFail) {
@@ -389,9 +384,8 @@ static void rtl_reset(struct eth_device *dev)
* from the configuration EEPROM default, because the card manufacturer
* should have set that to match the card. */
-#ifdef DEBUG_RX
- printf("rx ring address is %X\n",(unsigned long)rx_ring);
-#endif
+ debug_cond(DEBUG_RX,
+ "rx ring address is %lX\n",(unsigned long)rx_ring);
flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
@@ -424,9 +418,7 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
memcpy((char *)tx_buffer, (char *)packet, (int)length);
-#ifdef DEBUG_TX
- printf("sending %d bytes\n", len);
-#endif
+ debug_cond(DEBUG_TX, "sending %d bytes\n", len);
/* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
* bytes are sent automatically for the FCS, totalling to 64 bytes). */
@@ -453,16 +445,18 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
if (status & TxOK) {
cur_tx = (cur_tx + 1) % NUM_TX_DESC;
-#ifdef DEBUG_TX
- printf("tx done (%d ticks), status %hX txstatus %X\n",
- to-currticks(), status, txstatus);
-#endif
+
+ debug_cond(DEBUG_TX,
+ "tx done, status %hX txstatus %lX\n",
+ status, txstatus);
+
return length;
} else {
-#ifdef DEBUG_TX
- printf("tx timeout/error (%d usecs), status %hX txstatus %X\n",
- 10*i, status, txstatus);
-#endif
+
+ debug_cond(DEBUG_TX,
+ "tx timeout/error (%d usecs), status %hX txstatus %lX\n",
+ 10*i, status, txstatus);
+
rtl_reset(dev);
return 0;
@@ -486,9 +480,7 @@ static int rtl_poll(struct eth_device *dev)
/* See below for the rest of the interrupt acknowledges. */
outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
-#ifdef DEBUG_RX
- printf("rtl_poll: int %hX ", status);
-#endif
+ debug_cond(DEBUG_RX, "rtl_poll: int %hX ", status);
ring_offs = cur_rx % RX_BUF_LEN;
/* ring_offs is guaranteed being 4-byte aligned */
@@ -513,14 +505,11 @@ static int rtl_poll(struct eth_device *dev)
memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count);
NetReceive(rxdata, length);
-#ifdef DEBUG_RX
- printf("rx packet %d+%d bytes", semi_count,rx_size-4-semi_count);
-#endif
+ debug_cond(DEBUG_RX, "rx packet %d+%d bytes",
+ semi_count, rx_size-4-semi_count);
} else {
NetReceive(rx_ring + ring_offs + 4, length);
-#ifdef DEBUG_RX
- printf("rx packet %d bytes", rx_size-4);
-#endif
+ debug_cond(DEBUG_RX, "rx packet %d bytes", rx_size-4);
}
flush_cache((unsigned long)rx_ring, RX_BUF_LEN);