summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/mvsata_ide.c42
1 files changed, 33 insertions, 9 deletions
diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c
index 077b278..3d6993a 100644
--- a/drivers/block/mvsata_ide.c
+++ b/drivers/block/mvsata_ide.c
@@ -91,29 +91,48 @@ struct mvsata_port_registers {
#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003
/*
+ * Status codes to return to client callers. Currently, callers ignore
+ * exact value and only care for zero or nonzero, so no need to make this
+ * public, it is only #define'd for clarity.
+ * If/when standard negative codes are implemented in U-boot, then these
+ * #defines should be moved to, or replaced by ones from, the common list
+ * of status codes.
+ */
+
+#define MVSATA_STATUS_OK 0
+#define MVSATA_STATUS_TIMEOUT -1
+
+/*
* Initialize one MVSATAHC port: set SControl's IPM to "always active"
* and DET to "reset", then wait for SStatus's DET to become "device and
* comm ok" (or time out after 50 us if no device), then set SControl's
* DET back to "no action".
*/
-static void mvsata_ide_initialize_port(struct mvsata_port_registers *port)
+static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
{
u32 control;
u32 status;
- u32 tout = 50; /* wait at most 50 us for SATA reset to complete */
+ u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
+ /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
control = readl(&port->scontrol);
control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
writel(control, &port->scontrol);
- while (--tout) {
+ /* Toggle control DET back to 0 (normal operation) */
+ control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
+ writel(control, &port->scontrol);
+ /* wait for status DET to become 3 (device and communication OK) */
+ while (--timeleft) {
status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
if (status == MVSATA_SSTATUS_DET_DEVCOMM)
break;
udelay(1);
}
- control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
- writel(control, &port->scontrol);
+ /* return success or time-out error depending on time left */
+ if (!timeleft)
+ return MVSATA_STATUS_TIMEOUT;
+ return MVSATA_STATUS_OK;
}
/*
@@ -123,18 +142,23 @@ static void mvsata_ide_initialize_port(struct mvsata_port_registers *port)
int ide_preinit(void)
{
+ int status;
/* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
- mvsata_ide_initialize_port(
+ status = mvsata_ide_initialize_port(
(struct mvsata_port_registers *)
(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
+ if (status)
+ return status;
#endif
/* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
#if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
- mvsata_ide_initialize_port(
+ status = mvsata_ide_initialize_port(
(struct mvsata_port_registers *)
(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
+ if (status)
+ return status;
#endif
- /* return 0 as we always succeed */
- return 0;
+ /* return success if all ports initializations succeeded */
+ return MVSATA_STATUS_OK;
}