summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/fsl_sata.c14
-rw-r--r--drivers/i2c/bfin-twi_i2c.c169
-rw-r--r--drivers/mmc/fsl_esdhc.c34
-rw-r--r--drivers/mtd/ubi/wl.c9
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/altera_tse.c942
-rw-r--r--drivers/net/altera_tse.h494
-rw-r--r--drivers/net/bfin_mac.c28
-rw-r--r--drivers/net/bfin_mac.h3
-rw-r--r--drivers/net/dm9000x.c12
-rw-r--r--drivers/net/ethoc.c511
-rw-r--r--drivers/net/fec_mxc.c8
-rw-r--r--drivers/net/kirkwood_egiga.c24
-rw-r--r--drivers/net/kirkwood_egiga.h2
-rw-r--r--drivers/net/lan91c96.c1
-rw-r--r--drivers/net/mcfmii.c45
-rw-r--r--drivers/net/mpc512x_fec.c70
-rw-r--r--drivers/net/mpc5xxx_fec.c41
-rw-r--r--drivers/net/smc911x.c3
-rw-r--r--drivers/net/tsec.c3
-rw-r--r--drivers/qe/uec.c6
-rw-r--r--drivers/qe/uec_phy.c47
-rw-r--r--drivers/serial/ns16550.c69
-rw-r--r--drivers/serial/opencores_yanu.c22
-rw-r--r--drivers/usb/phy/Makefile1
-rw-r--r--drivers/video/Makefile9
-rw-r--r--drivers/video/mx3fb.c47
27 files changed, 2309 insertions, 307 deletions
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 8878560..4b97a0e 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* This program is free software; you can redistribute it and/or
@@ -22,6 +22,7 @@
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
+#include <asm/fsl_serdes.h>
#include <malloc.h>
#include <libata.h>
#include <fis.h>
@@ -129,6 +130,17 @@ int init_sata(int dev)
return -1;
}
+#ifdef CONFIG_MPC85xx
+ if ((dev == 0) && (!is_serdes_configured(SATA1))) {
+ printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
+ return -1;
+ }
+ if ((dev == 1) && (!is_serdes_configured(SATA2))) {
+ printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
+ return -1;
+ }
+#endif
+
/* Allocate SATA device driver struct */
sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
if (!sata) {
diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c
index 73a78d2..b3a04d3 100644
--- a/drivers/i2c/bfin-twi_i2c.c
+++ b/drivers/i2c/bfin-twi_i2c.c
@@ -1,7 +1,7 @@
/*
* i2c.c - driver for Blackfin on-chip TWI/I2C
*
- * Copyright (c) 2006-2008 Analog Devices Inc.
+ * Copyright (c) 2006-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -12,6 +12,35 @@
#include <asm/blackfin.h>
#include <asm/mach-common/bits/twi.h>
+/* Every register is 32bit aligned, but only 16bits in size */
+#define ureg(name) u16 name; u16 __pad_##name;
+struct twi_regs {
+ ureg(clkdiv);
+ ureg(control);
+ ureg(slave_ctl);
+ ureg(slave_stat);
+ ureg(slave_addr);
+ ureg(master_ctl);
+ ureg(master_stat);
+ ureg(master_addr);
+ ureg(int_stat);
+ ureg(int_mask);
+ ureg(fifo_ctl);
+ ureg(fifo_stat);
+ char __pad[0x50];
+ ureg(xmt_data8);
+ ureg(xmt_data16);
+ ureg(rcv_data8);
+ ureg(rcv_data16);
+};
+#undef ureg
+
+/* U-Boot I2C framework allows only one active device at a time. */
+#ifdef TWI_CLKDIV
+#define TWI0_CLKDIV TWI_CLKDIV
+#endif
+static volatile struct twi_regs *twi = (void *)TWI0_CLKDIV;
+
#ifdef DEBUG
# define dmemset(s, c, n) memset(s, c, n)
#else
@@ -19,29 +48,10 @@
#endif
#define debugi(fmt, args...) \
debug( \
- "MSTAT:0x%03x FSTAT:0x%x ISTAT:0x%02x\t" \
- "%-20s:%-3i: " fmt "\n", \
- bfin_read_TWI_MASTER_STAT(), bfin_read_TWI_FIFO_STAT(), bfin_read_TWI_INT_STAT(), \
+ "MSTAT:0x%03x FSTAT:0x%x ISTAT:0x%02x\t%-20s:%-3i: " fmt "\n", \
+ twi->master_stat, twi->fifo_stat, twi->int_stat, \
__func__, __LINE__, ## args)
-#ifdef TWI0_CLKDIV
-#define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val)
-#define bfin_read_TWI_CLKDIV(val) bfin_read_TWI0_CLKDIV(val)
-#define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val)
-#define bfin_read_TWI_CONTROL(val) bfin_read_TWI0_CONTROL(val)
-#define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val)
-#define bfin_write_TWI_XMT_DATA8(val) bfin_write_TWI0_XMT_DATA8(val)
-#define bfin_read_TWI_RCV_DATA8() bfin_read_TWI0_RCV_DATA8()
-#define bfin_read_TWI_INT_STAT() bfin_read_TWI0_INT_STAT()
-#define bfin_write_TWI_INT_STAT(val) bfin_write_TWI0_INT_STAT(val)
-#define bfin_read_TWI_MASTER_STAT() bfin_read_TWI0_MASTER_STAT()
-#define bfin_write_TWI_MASTER_STAT(val) bfin_write_TWI0_MASTER_STAT(val)
-#define bfin_read_TWI_MASTER_CTL() bfin_read_TWI0_MASTER_CTL()
-#define bfin_write_TWI_MASTER_CTL(val) bfin_write_TWI0_MASTER_CTL(val)
-#define bfin_write_TWI_INT_MASK(val) bfin_write_TWI0_INT_MASK(val)
-#define bfin_write_TWI_FIFO_CTL(val) bfin_write_TWI0_FIFO_CTL(val)
-#endif
-
#ifdef CONFIG_TWICLK_KHZ
# error do not define CONFIG_TWICLK_KHZ ... use CONFIG_SYS_I2C_SPEED
#endif
@@ -87,49 +97,48 @@ static int wait_for_completion(struct i2c_msg *msg)
ulong timebase = get_timer(0);
do {
- int_stat = bfin_read_TWI_INT_STAT();
+ int_stat = twi->int_stat;
if (int_stat & XMTSERV) {
debugi("processing XMTSERV");
- bfin_write_TWI_INT_STAT(XMTSERV);
+ twi->int_stat = XMTSERV;
SSYNC();
if (msg->alen) {
- bfin_write_TWI_XMT_DATA8(*(msg->abuf++));
+ twi->xmt_data8 = *(msg->abuf++);
--msg->alen;
} else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
- bfin_write_TWI_XMT_DATA8(*(msg->buf++));
+ twi->xmt_data8 = *(msg->buf++);
--msg->len;
} else {
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
- (msg->flags & I2C_M_COMBO ? RSTART | MDIR : STOP));
+ twi->master_ctl |= (msg->flags & I2C_M_COMBO) ? RSTART | MDIR : STOP;
SSYNC();
}
}
if (int_stat & RCVSERV) {
debugi("processing RCVSERV");
- bfin_write_TWI_INT_STAT(RCVSERV);
+ twi->int_stat = RCVSERV;
SSYNC();
if (msg->len) {
- *(msg->buf++) = bfin_read_TWI_RCV_DATA8();
+ *(msg->buf++) = twi->rcv_data8;
--msg->len;
} else if (msg->flags & I2C_M_STOP) {
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | STOP);
+ twi->master_ctl |= STOP;
SSYNC();
}
}
if (int_stat & MERR) {
debugi("processing MERR");
- bfin_write_TWI_INT_STAT(MERR);
+ twi->int_stat = MERR;
SSYNC();
return msg->len;
}
if (int_stat & MCOMP) {
debugi("processing MCOMP");
- bfin_write_TWI_INT_STAT(MCOMP);
+ twi->int_stat = MCOMP;
SSYNC();
if (msg->flags & I2C_M_COMBO && msg->len) {
- bfin_write_TWI_MASTER_CTL((bfin_read_TWI_MASTER_CTL() & ~RSTART) |
- (min(msg->len, 0xff) << 6) | MEN | MDIR);
+ twi->master_ctl = (twi->master_ctl & ~RSTART) |
+ (min(msg->len, 0xff) << 6) | MEN | MDIR;
SSYNC();
} else
break;
@@ -172,55 +181,54 @@ static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len,
chip, addr, alen, buffer[0], len, flags, (flags & I2C_M_READ ? "rd" : "wr"));
/* wait for things to settle */
- while (bfin_read_TWI_MASTER_STAT() & BUSBUSY)
+ while (twi->master_stat & BUSBUSY)
if (ctrlc())
return 1;
/* Set Transmit device address */
- bfin_write_TWI_MASTER_ADDR(chip);
+ twi->master_addr = chip;
/* Clear the FIFO before starting things */
- bfin_write_TWI_FIFO_CTL(XMTFLUSH | RCVFLUSH);
+ twi->fifo_ctl = XMTFLUSH | RCVFLUSH;
SSYNC();
- bfin_write_TWI_FIFO_CTL(0);
+ twi->fifo_ctl = 0;
SSYNC();
/* prime the pump */
if (msg.alen) {
len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
debugi("first byte=0x%02x", *msg.abuf);
- bfin_write_TWI_XMT_DATA8(*(msg.abuf++));
+ twi->xmt_data8 = *(msg.abuf++);
--msg.alen;
} else if (!(msg.flags & I2C_M_READ) && msg.len) {
debugi("first byte=0x%02x", *msg.buf);
- bfin_write_TWI_XMT_DATA8(*(msg.buf++));
+ twi->xmt_data8 = *(msg.buf++);
--msg.len;
}
/* clear int stat */
- bfin_write_TWI_MASTER_STAT(-1);
- bfin_write_TWI_INT_STAT(-1);
- bfin_write_TWI_INT_MASK(0);
+ twi->master_stat = -1;
+ twi->int_stat = -1;
+ twi->int_mask = 0;
SSYNC();
/* Master enable */
- bfin_write_TWI_MASTER_CTL(
- (bfin_read_TWI_MASTER_CTL() & FAST) |
+ twi->master_ctl =
+ (twi->master_ctl & FAST) |
(min(len, 0xff) << 6) | MEN |
- ((msg.flags & I2C_M_READ) ? MDIR : 0)
- );
+ ((msg.flags & I2C_M_READ) ? MDIR : 0);
SSYNC();
- debugi("CTL=0x%04x", bfin_read_TWI_MASTER_CTL());
+ debugi("CTL=0x%04x", twi->master_ctl);
/* process the rest */
ret = wait_for_completion(&msg);
debugi("ret=%d", ret);
if (ret) {
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() & ~MEN);
- bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() & ~TWI_ENA);
+ twi->master_ctl &= ~MEN;
+ twi->control &= ~TWI_ENA;
SSYNC();
- bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
+ twi->control |= TWI_ENA;
SSYNC();
}
@@ -238,10 +246,10 @@ int i2c_set_bus_speed(unsigned int speed)
/* Set TWI interface clock */
if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
return -1;
- bfin_write_TWI_CLKDIV((clkdiv << 8) | (clkdiv & 0xff));
+ twi->clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
/* Don't turn it on */
- bfin_write_TWI_MASTER_CTL(speed > 100000 ? FAST : 0);
+ twi->master_ctl = (speed > 100000 ? FAST : 0);
return 0;
}
@@ -253,7 +261,7 @@ int i2c_set_bus_speed(unsigned int speed)
unsigned int i2c_get_bus_speed(void)
{
/* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */
- return 5000000 / (bfin_read_TWI_CLKDIV() & 0xff);
+ return 5000000 / (twi->clkdiv & 0xff);
}
/**
@@ -269,24 +277,23 @@ void i2c_init(int speed, int slaveaddr)
uint8_t prescale = ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F;
/* Set TWI internal clock as 10MHz */
- bfin_write_TWI_CONTROL(prescale);
+ twi->control = prescale;
/* Set TWI interface clock as specified */
i2c_set_bus_speed(speed);
/* Enable it */
- bfin_write_TWI_CONTROL(TWI_ENA | prescale);
+ twi->control = TWI_ENA | prescale;
SSYNC();
- debugi("CONTROL:0x%04x CLKDIV:0x%04x",
- bfin_read_TWI_CONTROL(), bfin_read_TWI_CLKDIV());
+ debugi("CONTROL:0x%04x CLKDIV:0x%04x", twi->control, twi->clkdiv);
#if CONFIG_SYS_I2C_SLAVE
# error I2C slave support not tested/supported
/* If they want us as a slave, do it */
if (slaveaddr) {
- bfin_write_TWI_SLAVE_ADDR(slaveaddr);
- bfin_write_TWI_SLAVE_CTL(SEN);
+ twi->slave_addr = slaveaddr;
+ twi->slave_ctl = SEN;
}
#endif
}
@@ -329,3 +336,43 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
return i2c_transfer(chip, addr, alen, buffer, len, 0);
}
+
+/**
+ * i2c_set_bus_num - change active I2C bus
+ * @bus: bus index, zero based
+ * @returns: 0 on success, non-0 on failure
+ */
+int i2c_set_bus_num(unsigned int bus)
+{
+ switch (bus) {
+#if CONFIG_SYS_MAX_I2C_BUS > 0
+ case 0: twi = (void *)TWI0_CLKDIV; return 0;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 1
+ case 1: twi = (void *)TWI1_CLKDIV; return 0;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 2
+ case 2: twi = (void *)TWI2_CLKDIV; return 0;
+#endif
+ default: return -1;
+ }
+}
+
+/**
+ * i2c_get_bus_num - returns index of active I2C bus
+ */
+unsigned int i2c_get_bus_num(void)
+{
+ switch ((unsigned long)twi) {
+#if CONFIG_SYS_MAX_I2C_BUS > 0
+ case TWI0_CLKDIV: return 0;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 1
+ case TWI1_CLKDIV: return 1;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 2
+ case TWI2_CLKDIV: return 2;
+#endif
+ default: return -1;
+ }
+}
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a9b07a9..a368fe6 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -103,7 +103,7 @@ uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
/*
* PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
*/
-static int
+static void
esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
{
struct fsl_esdhc *regs = mmc->priv;
@@ -125,7 +125,7 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
&& --timeout);
if (timeout <= 0) {
printf("\nData Read Failed in PIO Mode.");
- return timeout;
+ return;
}
while (size && (!(irqstat & IRQSTAT_TC))) {
udelay(100); /* Wait before last byte transfer complete */
@@ -139,7 +139,7 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
}
} else {
blocks = data->blocks;
- buffer = data->src;
+ buffer = (char *)data->src;
while (blocks) {
timeout = PIO_TIMEOUT;
size = data->blocksize;
@@ -148,7 +148,7 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
&& --timeout);
if (timeout <= 0) {
printf("\nData Write Failed in PIO Mode.");
- return timeout;
+ return;
}
while (size && (!(irqstat & IRQSTAT_TC))) {
udelay(100); /* Wait before last byte transfer complete */
@@ -166,22 +166,12 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
{
- uint wml_value;
int timeout;
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+ uint wml_value;
-#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
- if (!(data->flags & MMC_DATA_READ)) {
- if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
- printf("\nThe SD card is locked. "
- "Can not write to a locked card.\n\n");
- return TIMEOUT;
- }
- esdhc_write32(&regs->dsaddr, (u32)data->src);
- } else
- esdhc_write32(&regs->dsaddr, (u32)data->dest);
-#else
wml_value = data->blocksize/4;
if (data->flags & MMC_DATA_READ) {
@@ -202,7 +192,17 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
wml_value << 16);
esdhc_write32(&regs->dsaddr, (u32)data->src);
}
-#endif
+#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
+ if (!(data->flags & MMC_DATA_READ)) {
+ if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
+ printf("\nThe SD card is locked. "
+ "Can not write to a locked card.\n\n");
+ return TIMEOUT;
+ }
+ esdhc_write32(&regs->dsaddr, (u32)data->src);
+ } else
+ esdhc_write32(&regs->dsaddr, (u32)data->dest);
+#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2f9a5e3..88b867a 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -696,8 +696,13 @@ static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
list_add_tail(&wrk->list, &ubi->works);
ubi_assert(ubi->works_count >= 0);
ubi->works_count += 1;
- if (ubi->thread_enabled)
- wake_up_process(ubi->bgt_thread);
+
+ /*
+ * U-Boot special: We have no bgt_thread in U-Boot!
+ * So just call do_work() here directly.
+ */
+ do_work(ubi);
+
spin_unlock(&ubi->wl_lock);
}
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1ec0ba1..b75c02f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libnet.a
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
+COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
@@ -39,6 +40,7 @@ COBJS-$(CONFIG_E1000) += e1000.o
COBJS-$(CONFIG_EEPRO100) += eepro100.o
COBJS-$(CONFIG_ENC28J60) += enc28j60.o
COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
+COBJS-$(CONFIG_ETHOC) += ethoc.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
COBJS-$(CONFIG_FTMAC100) += ftmac100.o
diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c
new file mode 100644
index 0000000..5c0c274
--- /dev/null
+++ b/drivers/net/altera_tse.c
@@ -0,0 +1,942 @@
+/*
+ * Altera 10/100/1000 triple speed ethernet mac driver
+ *
+ * Copyright (C) 2008 Altera Corporation.
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <asm/dma-mapping.h>
+#include <miiphy.h>
+#include "altera_tse.h"
+
+/* sgdma debug - print descriptor */
+static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
+{
+ debug("SGDMA DEBUG :\n");
+ debug("desc->source : 0x%x \n", (unsigned int)desc->source);
+ debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
+ debug("desc->next : 0x%x \n", (unsigned int)desc->next);
+ debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
+ debug("desc->destination_pad : 0x%x \n",
+ (unsigned int)desc->destination_pad);
+ debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
+ debug("desc->bytes_to_transfer : 0x%x \n",
+ (unsigned int)desc->bytes_to_transfer);
+ debug("desc->actual_bytes_transferred : 0x%x \n",
+ (unsigned int)desc->actual_bytes_transferred);
+ debug("desc->descriptor_status : 0x%x \n",
+ (unsigned int)desc->descriptor_status);
+ debug("desc->descriptor_control : 0x%x \n",
+ (unsigned int)desc->descriptor_control);
+}
+
+/* This is a generic routine that the SGDMA mode-specific routines
+ * call to populate a descriptor.
+ * arg1 :pointer to first SGDMA descriptor.
+ * arg2 :pointer to next SGDMA descriptor.
+ * arg3 :Address to where data to be written.
+ * arg4 :Address from where data to be read.
+ * arg5 :no of byte to transaction.
+ * arg6 :variable indicating to generate start of packet or not
+ * arg7 :read fixed
+ * arg8 :write fixed
+ * arg9 :read burst
+ * arg10 :write burst
+ * arg11 :atlantic_channel number
+ */
+static void alt_sgdma_construct_descriptor_burst(
+ volatile struct alt_sgdma_descriptor *desc,
+ volatile struct alt_sgdma_descriptor *next,
+ unsigned int *read_addr,
+ unsigned int *write_addr,
+ unsigned short length_or_eop,
+ int generate_eop,
+ int read_fixed,
+ int write_fixed_or_sop,
+ int read_burst,
+ int write_burst,
+ unsigned char atlantic_channel)
+{
+ /*
+ * Mark the "next" descriptor as "not" owned by hardware. This prevents
+ * The SGDMA controller from continuing to process the chain. This is
+ * done as a single IO write to bypass cache, without flushing
+ * the entire descriptor, since only the 8-bit descriptor status must
+ * be flushed.
+ */
+ if (!next)
+ debug("Next descriptor not defined!!\n");
+
+ next->descriptor_control = (next->descriptor_control &
+ ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK);
+
+ desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF);
+ desc->destination =
+ (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF);
+ desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF);
+ desc->source_pad = 0x0;
+ desc->destination_pad = 0x0;
+ desc->next_pad = 0x0;
+ desc->bytes_to_transfer = length_or_eop;
+ desc->actual_bytes_transferred = 0;
+ desc->descriptor_status = 0x0;
+
+ /* SGDMA burst not currently supported */
+ desc->read_burst = 0;
+ desc->write_burst = 0;
+
+ /*
+ * Set the descriptor control block as follows:
+ * - Set "owned by hardware" bit
+ * - Optionally set "generate EOP" bit
+ * - Optionally set the "read from fixed address" bit
+ * - Optionally set the "write to fixed address bit (which serves
+ * serves as a "generate SOP" control bit in memory-to-stream mode).
+ * - Set the 4-bit atlantic channel, if specified
+ *
+ * Note this step is performed after all other descriptor information
+ * has been filled out so that, if the controller already happens to be
+ * pointing at this descriptor, it will not run (via the "owned by
+ * hardware" bit) until all other descriptor has been set up.
+ */
+
+ desc->descriptor_control =
+ ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
+ (generate_eop ?
+ ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) |
+ (read_fixed ?
+ ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) |
+ (write_fixed_or_sop ?
+ ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) |
+ (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0)
+ );
+}
+
+static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
+ volatile struct alt_sgdma_descriptor *desc)
+{
+ unsigned int status;
+ int counter = 0;
+
+ /* Wait for any pending transfers to complete */
+ alt_sgdma_print_desc(desc);
+ status = dev->status;
+
+ counter = 0;
+ while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+ break;
+ }
+
+ if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+ debug("Timeout waiting sgdma in do sync!\n");
+
+ /*
+ * Clear any (previous) status register information
+ * that might occlude our error checking later.
+ */
+ dev->status = 0xFF;
+
+ /* Point the controller at the descriptor */
+ dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
+ debug("next desc in sgdma 0x%x\n",
+ (unsigned int)dev->next_descriptor_pointer);
+
+ /*
+ * Set up SGDMA controller to:
+ * - Disable interrupt generation
+ * - Run once a valid descriptor is written to controller
+ * - Stop on an error with any particular descriptor
+ */
+ dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
+ ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
+
+ /* Wait for the descriptor (chain) to complete */
+ status = dev->status;
+ debug("wait for sgdma....");
+ while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK)
+ ;
+ debug("done\n");
+
+ /* Clear Run */
+ dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
+
+ /* Get & clear status register contents */
+ status = dev->status;
+ dev->status = 0xFF;
+
+ /* we really should check if the transfer completes properly */
+ debug("tx sgdma status = 0x%x", status);
+ return 0;
+}
+
+static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
+ volatile struct alt_sgdma_descriptor *desc)
+{
+ unsigned int status;
+ int counter = 0;
+
+ /* Wait for any pending transfers to complete */
+ alt_sgdma_print_desc(desc);
+ status = dev->status;
+
+ counter = 0;
+ while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+ break;
+ }
+
+ if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+ debug("Timeout waiting sgdma in do async!\n");
+
+ /*
+ * Clear any (previous) status register information
+ * that might occlude our error checking later.
+ */
+ dev->status = 0xFF;
+
+ /* Point the controller at the descriptor */
+ dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
+
+ /*
+ * Set up SGDMA controller to:
+ * - Disable interrupt generation
+ * - Run once a valid descriptor is written to controller
+ * - Stop on an error with any particular descriptor
+ */
+ dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
+ ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
+
+ /* we really should check if the transfer completes properly */
+ return 0;
+}
+
+/* u-boot interface */
+static int tse_adjust_link(struct altera_tse_priv *priv)
+{
+ unsigned int refvar;
+
+ refvar = priv->mac_dev->command_config.image;
+
+ if (!(priv->duplexity))
+ refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
+ else
+ refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK;
+
+ switch (priv->speed) {
+ case 1000:
+ refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
+ refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
+ break;
+ case 100:
+ refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
+ refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
+ break;
+ case 10:
+ refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
+ refvar |= ALTERA_TSE_CMD_ENA_10_MSK;
+ break;
+ }
+ priv->mac_dev->command_config.image = refvar;
+
+ return 0;
+}
+
+static int tse_eth_send(struct eth_device *dev,
+ volatile void *packet, int length)
+{
+ struct altera_tse_priv *priv = dev->priv;
+ volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
+ volatile struct alt_sgdma_descriptor *tx_desc =
+ (volatile struct alt_sgdma_descriptor *)priv->tx_desc;
+
+ volatile struct alt_sgdma_descriptor *tx_desc_cur =
+ (volatile struct alt_sgdma_descriptor *)&tx_desc[0];
+
+ flush_dcache((unsigned long)packet, length);
+ alt_sgdma_construct_descriptor_burst(
+ (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
+ (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
+ (unsigned int *)packet, /* read addr */
+ (unsigned int *)0,
+ length, /* length or EOP ,will change for each tx */
+ 0x1, /* gen eop */
+ 0x0, /* read fixed */
+ 0x1, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+ debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length);
+
+ /* send the packet */
+ debug("sending packet\n");
+ alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
+ debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
+ return tx_desc_cur->actual_bytes_transferred;
+}
+
+static int tse_eth_rx(struct eth_device *dev)
+{
+ int packet_length = 0;
+ struct altera_tse_priv *priv = dev->priv;
+ volatile struct alt_sgdma_descriptor *rx_desc =
+ (volatile struct alt_sgdma_descriptor *)priv->rx_desc;
+ volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
+
+ if (rx_desc_cur->descriptor_status &
+ ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
+ debug("got packet\n");
+ packet_length = rx_desc->actual_bytes_transferred;
+ NetReceive(NetRxPackets[0], packet_length);
+
+ /* start descriptor again */
+ flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
+ alt_sgdma_construct_descriptor_burst(
+ (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
+ (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
+ (unsigned int)0x0, /* read addr */
+ (unsigned int *)NetRxPackets[0],
+ 0x0, /* length or EOP */
+ 0x0, /* gen eop */
+ 0x0, /* read fixed */
+ 0x0, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+
+ /* setup the sgdma */
+ alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
+ }
+
+ return -1;
+}
+
+static void tse_eth_halt(struct eth_device *dev)
+{
+ /* don't do anything! */
+ /* this gets called after each uboot */
+ /* network command. don't need to reset the thing all of the time */
+}
+
+static void tse_eth_reset(struct eth_device *dev)
+{
+ /* stop sgdmas, disable tse receive */
+ struct altera_tse_priv *priv = dev->priv;
+ volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
+ volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
+ volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
+ int counter;
+ volatile struct alt_sgdma_descriptor *rx_desc =
+ (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0];
+
+ /* clear rx desc & wait for sgdma to complete */
+ rx_desc->descriptor_control = 0;
+ rx_sgdma->control = 0;
+ counter = 0;
+ while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+ break;
+ }
+
+ if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
+ debug("Timeout waiting for rx sgdma!\n");
+ rx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
+ rx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
+ }
+
+ counter = 0;
+ tx_sgdma->control = 0;
+ while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
+ if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+ break;
+ }
+
+ if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
+ debug("Timeout waiting for tx sgdma!\n");
+ tx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
+ tx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
+ }
+ /* reset the mac */
+ mac_dev->command_config.bits.transmit_enable = 1;
+ mac_dev->command_config.bits.receive_enable = 1;
+ mac_dev->command_config.bits.software_reset = 1;
+
+ counter = 0;
+ while (mac_dev->command_config.bits.software_reset) {
+ if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR)
+ break;
+ }
+
+ if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR)
+ debug("TSEMAC SW reset bit never cleared!\n");
+}
+
+static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
+{
+ volatile struct alt_tse_mac *mac_dev;
+ unsigned int *mdio_regs;
+ unsigned int data;
+ u16 value;
+
+ mac_dev = priv->mac_dev;
+
+ /* set mdio address */
+ mac_dev->mdio_phy1_addr = priv->phyaddr;
+ mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
+
+ /* get the data */
+ data = mdio_regs[regnum];
+
+ value = data & 0xffff;
+
+ return value;
+}
+
+static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
+ unsigned int value)
+{
+ volatile struct alt_tse_mac *mac_dev;
+ unsigned int *mdio_regs;
+ unsigned int data;
+
+ mac_dev = priv->mac_dev;
+
+ /* set mdio address */
+ mac_dev->mdio_phy1_addr = priv->phyaddr;
+ mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
+
+ /* get the data */
+ data = (unsigned int)value;
+
+ mdio_regs[regnum] = data;
+
+ return 0;
+}
+
+/* MDIO access to phy */
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
+static int altera_tse_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ struct eth_device *dev;
+ struct altera_tse_priv *priv;
+ dev = eth_get_dev_by_name(devname);
+ priv = dev->priv;
+
+ tse_mdio_write(priv, (uint) reg, (uint) value);
+
+ return 0;
+}
+
+static int altera_tse_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ struct eth_device *dev;
+ struct altera_tse_priv *priv;
+ volatile struct alt_tse_mac *mac_dev;
+ unsigned int *mdio_regs;
+
+ dev = eth_get_dev_by_name(devname);
+ priv = dev->priv;
+
+ mac_dev = priv->mac_dev;
+ mac_dev->mdio_phy1_addr = (int)addr;
+ mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
+
+ *value = 0xffff & mdio_regs[reg];
+
+ return 0;
+
+}
+#endif
+
+/*
+ * Also copied from tsec.c
+ */
+/* Parse the status register for link, and then do
+ * auto-negotiation
+ */
+static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
+{
+ /*
+ * Wait if the link is up, and autonegotiation is in progress
+ * (ie - we're capable and it's not done)
+ */
+ mii_reg = tse_mdio_read(priv, MIIM_STATUS);
+
+ if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE)
+ && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ int i = 0;
+
+ puts("Waiting for PHY auto negotiation to complete");
+ while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ priv->link = 0;
+ return 0;
+ }
+
+ if ((i++ % 1000) == 0)
+ putc('.');
+ udelay(1000); /* 1 ms */
+ mii_reg = tse_mdio_read(priv, MIIM_STATUS);
+ }
+ puts(" done\n");
+ priv->link = 1;
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_STATUS_LINK) {
+ debug("Link is up\n");
+ priv->link = 1;
+ } else {
+ debug("Link is down\n");
+ priv->link = 0;
+ }
+ }
+
+ return 0;
+}
+
+/* Parse the 88E1011's status register for speed and duplex
+ * information
+ */
+static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
+{
+ uint speed;
+
+ mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
+
+ if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
+ !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ priv->link = 0;
+ break;
+ }
+
+ if ((i++ == 1000) == 0) {
+ i = 0;
+ puts(".");
+ }
+ udelay(1000); /* 1 ms */
+ mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
+ priv->link = 1;
+ else
+ priv->link = 0;
+ }
+
+ if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
+
+ switch (speed) {
+ case MIIM_88E1011_PHYSTAT_GBIT:
+ priv->speed = 1000;
+ debug("PHY Speed is 1000Mbit\n");
+ break;
+ case MIIM_88E1011_PHYSTAT_100:
+ debug("PHY Speed is 100Mbit\n");
+ priv->speed = 100;
+ break;
+ default:
+ debug("PHY Speed is 10Mbit\n");
+ priv->speed = 10;
+ }
+
+ return 0;
+}
+
+static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
+{
+ uint mii_data = tse_mdio_read(priv, mii_reg);
+ mii_data &= 0xfff0;
+ mii_data |= 0xb;
+ return mii_data;
+}
+
+static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
+{
+ uint mii_data = tse_mdio_read(priv, mii_reg);
+ mii_data &= ~0x82;
+ mii_data |= 0x82;
+ return mii_data;
+}
+
+/*
+ * Returns which value to write to the control register.
+ * For 10/100, the value is slightly different
+ */
+static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
+{
+ return MIIM_CONTROL_INIT;
+}
+
+/*
+ * PHY & MDIO code
+ * Need to add SGMII stuff
+ *
+ */
+
+static struct phy_info phy_info_M88E1111S = {
+ 0x01410cc,
+ "Marvell 88E1111S",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_88E1111_PHY_EXT_SR, 0x848f,
+ &mii_m88e1111s_setmode_sr},
+ /* Delay RGMII TX and RX */
+ {MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
+ &mii_m88e1111s_setmode_cr},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+/* a generic flavor. */
+static struct phy_info phy_info_generic = {
+ 0,
+ "Unknown/Generic PHY",
+ 32,
+ (struct phy_cmd[]){ /* config */
+ {PHY_BMCR, PHY_BMCR_RESET, NULL},
+ {PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ {PHY_BMSR, miim_read, NULL},
+ {PHY_BMSR, miim_read, &mii_parse_sr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ }
+};
+
+static struct phy_info *phy_info[] = {
+ &phy_info_M88E1111S,
+ NULL
+};
+
+ /* Grab the identifier of the device's PHY, and search through
+ * all of the known PHYs to see if one matches. If so, return
+ * it, if not, return NULL
+ */
+static struct phy_info *get_phy_info(struct eth_device *dev)
+{
+ struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
+ uint phy_reg, phy_ID;
+ int i;
+ struct phy_info *theInfo = NULL;
+
+ /* Grab the bits from PHYIR1, and put them in the upper half */
+ phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
+ phy_ID = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
+ phy_ID |= (phy_reg & 0xffff);
+
+ /* loop through all the known PHY types, and find one that */
+ /* matches the ID we read from the PHY. */
+ for (i = 0; phy_info[i]; i++) {
+ if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
+ theInfo = phy_info[i];
+ break;
+ }
+ }
+
+ if (theInfo == NULL) {
+ theInfo = &phy_info_generic;
+ debug("%s: No support for PHY id %x; assuming generic\n",
+ dev->name, phy_ID);
+ } else
+ debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
+
+ return theInfo;
+}
+
+/* Execute the given series of commands on the given device's
+ * PHY, running functions as necessary
+ */
+static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
+{
+ int i;
+ uint result;
+
+ for (i = 0; cmd->mii_reg != miim_end; i++) {
+ if (cmd->mii_data == miim_read) {
+ result = tse_mdio_read(priv, cmd->mii_reg);
+
+ if (cmd->funct != NULL)
+ (*(cmd->funct)) (result, priv);
+
+ } else {
+ if (cmd->funct != NULL)
+ result = (*(cmd->funct)) (cmd->mii_reg, priv);
+ else
+ result = cmd->mii_data;
+
+ tse_mdio_write(priv, cmd->mii_reg, result);
+
+ }
+ cmd++;
+ }
+}
+
+/* Phy init code */
+static int init_phy(struct eth_device *dev)
+{
+ struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
+ struct phy_info *curphy;
+
+ /* Get the cmd structure corresponding to the attached
+ * PHY */
+ curphy = get_phy_info(dev);
+
+ if (curphy == NULL) {
+ priv->phyinfo = NULL;
+ debug("%s: No PHY found\n", dev->name);
+
+ return 0;
+ } else
+ debug("%s found\n", curphy->name);
+ priv->phyinfo = curphy;
+
+ phy_run_commands(priv, priv->phyinfo->config);
+
+ return 1;
+}
+
+static int tse_set_mac_address(struct eth_device *dev)
+{
+ struct altera_tse_priv *priv = dev->priv;
+ volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
+
+ debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n",
+ dev->enetaddr[5], dev->enetaddr[4],
+ dev->enetaddr[3], dev->enetaddr[2],
+ dev->enetaddr[1], dev->enetaddr[0]);
+ mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 |
+ (dev->enetaddr[2]) << 16 |
+ (dev->enetaddr[1]) << 8 | (dev->enetaddr[0]));
+
+ mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 |
+ (dev->enetaddr[4])) & 0xFFFF);
+
+ /* Set the MAC address */
+ mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
+ mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1;
+
+ /* Set the MAC address */
+ mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0;
+ mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1;
+
+ /* Set the MAC address */
+ mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0;
+ mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1;
+
+ /* Set the MAC address */
+ mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
+ mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
+ return 0;
+}
+
+static int tse_eth_init(struct eth_device *dev, bd_t * bd)
+{
+ int dat;
+ struct altera_tse_priv *priv = dev->priv;
+ volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
+ volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
+ volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
+ volatile struct alt_sgdma_descriptor *rx_desc_cur =
+ (volatile struct alt_sgdma_descriptor *)&rx_desc[0];
+
+ /* stop controller */
+ debug("Reseting TSE & SGDMAs\n");
+ tse_eth_reset(dev);
+
+ /* start the phy */
+ debug("Configuring PHY\n");
+ phy_run_commands(priv, priv->phyinfo->startup);
+
+ /* need to create sgdma */
+ debug("Configuring tx desc\n");
+ alt_sgdma_construct_descriptor_burst(
+ (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
+ (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
+ (unsigned int *)NULL, /* read addr */
+ (unsigned int *)0,
+ 0, /* length or EOP ,will change for each tx */
+ 0x1, /* gen eop */
+ 0x0, /* read fixed */
+ 0x1, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+ debug("Configuring rx desc\n");
+ flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
+ alt_sgdma_construct_descriptor_burst(
+ (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
+ (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
+ (unsigned int)0x0, /* read addr */
+ (unsigned int *)NetRxPackets[0],
+ 0x0, /* length or EOP */
+ 0x0, /* gen eop */
+ 0x0, /* read fixed */
+ 0x0, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+ /* start rx async transfer */
+ debug("Starting rx sgdma\n");
+ alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
+
+ /* start TSE */
+ debug("Configuring TSE Mac\n");
+ /* Initialize MAC registers */
+ mac_dev->max_frame_length = PKTSIZE_ALIGN;
+ mac_dev->rx_almost_empty_threshold = 8;
+ mac_dev->rx_almost_full_threshold = 8;
+ mac_dev->tx_almost_empty_threshold = 8;
+ mac_dev->tx_almost_full_threshold = 3;
+ mac_dev->tx_sel_empty_threshold =
+ CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
+ mac_dev->tx_sel_full_threshold = 0;
+ mac_dev->rx_sel_empty_threshold =
+ CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
+ mac_dev->rx_sel_full_threshold = 0;
+
+ /* NO Shift */
+ mac_dev->rx_cmd_stat.bits.rx_shift16 = 0;
+ mac_dev->tx_cmd_stat.bits.tx_shift16 = 0;
+
+ /* enable MAC */
+ dat = 0;
+ dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
+
+ mac_dev->command_config.image = dat;
+
+ /* configure the TSE core */
+ /* -- output clocks, */
+ /* -- and later config stuff for SGMII */
+ if (priv->link) {
+ debug("Adjusting TSE to link speed\n");
+ tse_adjust_link(priv);
+ }
+
+ return priv->link ? 0 : -1;
+}
+
+/* TSE init code */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+ int sgdma_rx_base, int sgdma_tx_base)
+{
+ struct altera_tse_priv *priv;
+ struct eth_device *dev;
+ struct alt_sgdma_descriptor *rx_desc;
+ struct alt_sgdma_descriptor *tx_desc;
+ unsigned long dma_handle;
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ if (NULL == dev)
+ return 0;
+
+ memset(dev, 0, sizeof *dev);
+
+ priv = malloc(sizeof(*priv));
+
+ if (!priv) {
+ free(dev);
+ return 0;
+ }
+ tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
+ &dma_handle);
+ rx_desc = tx_desc + 2;
+ debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
+ debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
+
+ if (!tx_desc) {
+ free(priv);
+ free(dev);
+ return 0;
+ }
+ memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
+ memset(tx_desc, 0, (sizeof *tx_desc) * 2);
+
+ /* initialize tse priv */
+ priv->mac_dev = (volatile struct alt_tse_mac *)mac_base;
+ priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base;
+ priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base;
+ priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR;
+ priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS;
+ priv->rx_desc = rx_desc;
+ priv->tx_desc = tx_desc;
+
+ /* init eth structure */
+ dev->priv = priv;
+ dev->init = tse_eth_init;
+ dev->halt = tse_eth_halt;
+ dev->send = tse_eth_send;
+ dev->recv = tse_eth_rx;
+ dev->write_hwaddr = tse_set_mac_address;
+ sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num);
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
+ miiphy_register(dev->name, altera_tse_miiphy_read,
+ altera_tse_miiphy_write);
+#endif
+
+ init_phy(dev);
+
+ return 1;
+}
diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h
new file mode 100644
index 0000000..c1cb79e
--- /dev/null
+++ b/drivers/net/altera_tse.h
@@ -0,0 +1,494 @@
+/*
+ * Altera 10/100/1000 triple speed ethernet mac
+ *
+ * Copyright (C) 2008 Altera Corporation.
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ALTERA_TSE_H_
+#define _ALTERA_TSE_H_
+
+#define __packed_1_ __attribute__ ((packed, aligned(1)))
+
+/* PHY Stuff */
+#define miim_end -2
+#define miim_read -1
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
+
+#ifndef CONFIG_SYS_TBIPA_VALUE
+#define CONFIG_SYS_TBIPA_VALUE 0x1f
+#endif
+#define MIIMCFG_INIT_VALUE 0x00000003
+#define MIIMCFG_RESET 0x80000000
+
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+#define MIIM_CONTROL 0x00
+#define MIIM_CONTROL_RESET 0x00009140
+#define MIIM_CONTROL_INIT 0x00001140
+#define MIIM_CONTROL_RESTART 0x00001340
+#define MIIM_ANEN 0x00001000
+
+#define MIIM_CR 0x00
+#define MIIM_CR_RST 0x00008000
+#define MIIM_CR_INIT 0x00001000
+
+#define MIIM_STATUS 0x1
+#define MIIM_STATUS_AN_DONE 0x00000020
+#define MIIM_STATUS_LINK 0x0004
+#define PHY_BMSR_AUTN_ABLE 0x0008
+#define PHY_BMSR_AUTN_COMP 0x0020
+
+#define MIIM_PHYIR1 0x2
+#define MIIM_PHYIR2 0x3
+
+#define MIIM_ANAR 0x4
+#define MIIM_ANAR_INIT 0x1e1
+
+#define MIIM_TBI_ANLPBPA 0x5
+#define MIIM_TBI_ANLPBPA_HALF 0x00000040
+#define MIIM_TBI_ANLPBPA_FULL 0x00000020
+
+#define MIIM_TBI_ANEX 0x6
+#define MIIM_TBI_ANEX_NP 0x00000004
+#define MIIM_TBI_ANEX_PRX 0x00000002
+
+#define MIIM_GBIT_CONTROL 0x9
+#define MIIM_GBIT_CONTROL_INIT 0xe00
+
+#define MIIM_EXT_PAGE_ACCESS 0x1f
+
+/* 88E1011 PHY Status Register */
+#define MIIM_88E1011_PHY_STATUS 0x11
+#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
+#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
+#define MIIM_88E1011_PHYSTAT_100 0x4000
+#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
+#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
+#define MIIM_88E1011_PHYSTAT_LINK 0x0400
+
+#define MIIM_88E1011_PHY_SCR 0x10
+#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
+
+#define MIIM_88E1111_PHY_EXT_CR 0x14
+#define MIIM_88E1111_PHY_EXT_SR 0x1b
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL 24
+#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
+
+#define MIIM_READ_COMMAND 0x00000001
+
+/* struct phy_info: a structure which defines attributes for a PHY
+ * id will contain a number which represents the PHY. During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is. The 32-bit result
+ * gotten from the PHY will be shifted right by "shift" bits to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ * The struct phy_cmd entries represent pointers to an arrays of
+ * commands which tell the driver what to do to the PHY.
+ */
+struct phy_info {
+ uint id;
+ char *name;
+ uint shift;
+ /* Called to configure the PHY, and modify the controller
+ * based on the results */
+ struct phy_cmd *config;
+
+ /* Called when starting up the controller */
+ struct phy_cmd *startup;
+
+ /* Called when bringing down the controller */
+ struct phy_cmd *shutdown;
+};
+
+/* SGDMA Stuff */
+#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001)
+#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002)
+#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK (0x00000004)
+#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008)
+#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010)
+
+#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001)
+#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002)
+#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004)
+#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008)
+#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010)
+#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020)
+#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040)
+#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080)
+#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00)
+#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000)
+#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000)
+#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000)
+
+#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
+ | ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
+ | ALT_SGDMA_CONTROL_IE_GLOBAL_MSK)
+
+/*
+ * Descriptor control bit masks & offsets
+ *
+ * Note: The control byte physically occupies bits [31:24] in memory.
+ * The following bit-offsets are expressed relative to the LSB of
+ * the control register bitfield.
+ */
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK (0x00000001)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK (0x00000002)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK (0x00000004)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK (0x00000008)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK (0x00000080)
+
+/*
+ * Descriptor status bit masks & offsets
+ *
+ * Note: The status byte physically occupies bits [23:16] in memory.
+ * The following bit-offsets are expressed relative to the LSB of
+ * the status register bitfield.
+ */
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK (0x00000001)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK (0x00000002)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK (0x00000004)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK (0x00000008)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK (0x00000010)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK (0x00000020)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK (0x00000040)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK (0x00000080)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK (0x0000007F)
+
+/*
+ * The SGDMA controller buffer descriptor allocates
+ * 64 bits for each address. To support ANSI C, the
+ * struct implementing a descriptor places 32-bits
+ * of padding directly above each address; each pad must
+ * be cleared when initializing a descriptor.
+ */
+
+/*
+ * Buffer Descriptor data structure
+ *
+ */
+struct alt_sgdma_descriptor {
+ unsigned int *source; /* the address of data to be read. */
+ unsigned int source_pad;
+
+ unsigned int *destination; /* the address to write data */
+ unsigned int destination_pad;
+
+ unsigned int *next; /* the next descriptor in the list. */
+ unsigned int next_pad;
+
+ unsigned short bytes_to_transfer; /* the number of bytes to transfer */
+ unsigned char read_burst;
+ unsigned char write_burst;
+
+ unsigned short actual_bytes_transferred;/* bytes transferred by DMA */
+ unsigned char descriptor_status;
+ unsigned char descriptor_control;
+
+} __packed_1_;
+
+/* SG-DMA Control/Status Slave registers map */
+
+struct alt_sgdma_registers {
+ unsigned int status;
+ unsigned int status_pad[3];
+ unsigned int control;
+ unsigned int control_pad[3];
+ unsigned int next_descriptor_pointer;
+ unsigned int descriptor_pad[3];
+};
+
+/* TSE Stuff */
+#define ALTERA_TSE_CMD_TX_ENA_MSK (0x00000001)
+#define ALTERA_TSE_CMD_RX_ENA_MSK (0x00000002)
+#define ALTERA_TSE_CMD_XON_GEN_MSK (0x00000004)
+#define ALTERA_TSE_CMD_ETH_SPEED_MSK (0x00000008)
+#define ALTERA_TSE_CMD_PROMIS_EN_MSK (0x00000010)
+#define ALTERA_TSE_CMD_PAD_EN_MSK (0x00000020)
+#define ALTERA_TSE_CMD_CRC_FWD_MSK (0x00000040)
+#define ALTERA_TSE_CMD_PAUSE_FWD_MSK (0x00000080)
+#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK (0x00000100)
+#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK (0x00000200)
+#define ALTERA_TSE_CMD_HD_ENA_MSK (0x00000400)
+#define ALTERA_TSE_CMD_EXCESS_COL_MSK (0x00000800)
+#define ALTERA_TSE_CMD_LATE_COL_MSK (0x00001000)
+#define ALTERA_TSE_CMD_SW_RESET_MSK (0x00002000)
+#define ALTERA_TSE_CMD_MHASH_SEL_MSK (0x00004000)
+#define ALTERA_TSE_CMD_LOOPBACK_MSK (0x00008000)
+/* Bits (18:16) = address select */
+#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK (0x00070000)
+#define ALTERA_TSE_CMD_MAGIC_ENA_MSK (0x00080000)
+#define ALTERA_TSE_CMD_SLEEP_MSK (0x00100000)
+#define ALTERA_TSE_CMD_WAKEUP_MSK (0x00200000)
+#define ALTERA_TSE_CMD_XOFF_GEN_MSK (0x00400000)
+#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK (0x00800000)
+#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK (0x01000000)
+#define ALTERA_TSE_CMD_ENA_10_MSK (0x02000000)
+#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK (0x04000000)
+/* Bits (30..27) reserved */
+#define ALTERA_TSE_CMD_CNT_RESET_MSK (0x80000000)
+
+#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 (0x00040000)
+#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC (0x00020000)
+
+#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000)
+
+#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000
+#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000
+
+/* Command_Config Register Bit Definitions */
+
+typedef volatile union __alt_tse_command_config {
+ unsigned int image;
+ struct {
+ unsigned int
+ transmit_enable:1, /* bit 0 */
+ receive_enable:1, /* bit 1 */
+ pause_frame_xon_gen:1, /* bit 2 */
+ ethernet_speed:1, /* bit 3 */
+ promiscuous_enable:1, /* bit 4 */
+ pad_enable:1, /* bit 5 */
+ crc_forward:1, /* bit 6 */
+ pause_frame_forward:1, /* bit 7 */
+ pause_frame_ignore:1, /* bit 8 */
+ set_mac_address_on_tx:1, /* bit 9 */
+ halfduplex_enable:1, /* bit 10 */
+ excessive_collision:1, /* bit 11 */
+ late_collision:1, /* bit 12 */
+ software_reset:1, /* bit 13 */
+ multicast_hash_mode_sel:1, /* bit 14 */
+ loopback_enable:1, /* bit 15 */
+ src_mac_addr_sel_on_tx:3, /* bit 18:16 */
+ magic_packet_detect:1, /* bit 19 */
+ sleep_mode_enable:1, /* bit 20 */
+ wake_up_request:1, /* bit 21 */
+ pause_frame_xoff_gen:1, /* bit 22 */
+ control_frame_enable:1, /* bit 23 */
+ payload_len_chk_disable:1, /* bit 24 */
+ enable_10mbps_intf:1, /* bit 25 */
+ rx_error_discard_enable:1, /* bit 26 */
+ reserved_bits:4, /* bit 30:27 */
+ self_clear_counter_reset:1; /* bit 31 */
+ } __packed_1_ bits;
+} __packed_1_ alt_tse_command_config;
+
+/* Tx_Cmd_Stat Register Bit Definitions */
+
+typedef volatile union __alt_tse_tx_cmd_stat {
+ unsigned int image;
+ struct {
+ unsigned int reserved_lsbs:17, /* bit 16:0 */
+ omit_crc:1, /* bit 17 */
+ tx_shift16:1, /* bit 18 */
+ reserved_msbs:13; /* bit 31:19 */
+
+ } __packed_1_ bits;
+} alt_tse_tx_cmd_stat;
+
+/* Rx_Cmd_Stat Register Bit Definitions */
+
+typedef volatile union __alt_tse_rx_cmd_stat {
+ unsigned int image;
+ struct {
+ unsigned int reserved_lsbs:25, /* bit 24:0 */
+ rx_shift16:1, /* bit 25 */
+ reserved_msbs:6; /* bit 31:26 */
+
+ } __packed_1_ bits;
+} alt_tse_rx_cmd_stat;
+
+struct alt_tse_mdio {
+ unsigned int control; /*PHY device operation control register */
+ unsigned int status; /*PHY device operation status register */
+ unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */
+ unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */
+ unsigned int auto_negotiation_advertisement;
+ unsigned int remote_partner_base_page_ability;
+
+ unsigned int reg6;
+ unsigned int reg7;
+ unsigned int reg8;
+ unsigned int reg9;
+ unsigned int rega;
+ unsigned int regb;
+ unsigned int regc;
+ unsigned int regd;
+ unsigned int rege;
+ unsigned int regf;
+ unsigned int reg10;
+ unsigned int reg11;
+ unsigned int reg12;
+ unsigned int reg13;
+ unsigned int reg14;
+ unsigned int reg15;
+ unsigned int reg16;
+ unsigned int reg17;
+ unsigned int reg18;
+ unsigned int reg19;
+ unsigned int reg1a;
+ unsigned int reg1b;
+ unsigned int reg1c;
+ unsigned int reg1d;
+ unsigned int reg1e;
+ unsigned int reg1f;
+};
+
+/* MAC register Space */
+
+struct alt_tse_mac {
+ unsigned int megacore_revision;
+ unsigned int scratch_pad;
+ alt_tse_command_config command_config;
+ unsigned int mac_addr_0;
+ unsigned int mac_addr_1;
+ unsigned int max_frame_length;
+ unsigned int pause_quanta;
+ unsigned int rx_sel_empty_threshold;
+ unsigned int rx_sel_full_threshold;
+ unsigned int tx_sel_empty_threshold;
+ unsigned int tx_sel_full_threshold;
+ unsigned int rx_almost_empty_threshold;
+ unsigned int rx_almost_full_threshold;
+ unsigned int tx_almost_empty_threshold;
+ unsigned int tx_almost_full_threshold;
+ unsigned int mdio_phy0_addr;
+ unsigned int mdio_phy1_addr;
+
+ /* only if 100/1000 BaseX PCS, reserved otherwise */
+ unsigned int reservedx44[5];
+
+ unsigned int reg_read_access_status;
+ unsigned int min_tx_ipg_length;
+
+ /* IEEE 802.3 oEntity Managed Object Support */
+ unsigned int aMACID_1; /*The MAC addresses */
+ unsigned int aMACID_2;
+ unsigned int aFramesTransmittedOK;
+ unsigned int aFramesReceivedOK;
+ unsigned int aFramesCheckSequenceErrors;
+ unsigned int aAlignmentErrors;
+ unsigned int aOctetsTransmittedOK;
+ unsigned int aOctetsReceivedOK;
+
+ /* IEEE 802.3 oPausedEntity Managed Object Support */
+ unsigned int aTxPAUSEMACCtrlFrames;
+ unsigned int aRxPAUSEMACCtrlFrames;
+
+ /* IETF MIB (MIB-II) Object Support */
+ unsigned int ifInErrors;
+ unsigned int ifOutErrors;
+ unsigned int ifInUcastPkts;
+ unsigned int ifInMulticastPkts;
+ unsigned int ifInBroadcastPkts;
+ unsigned int ifOutDiscards;
+ unsigned int ifOutUcastPkts;
+ unsigned int ifOutMulticastPkts;
+ unsigned int ifOutBroadcastPkts;
+
+ /* IETF RMON MIB Object Support */
+ unsigned int etherStatsDropEvent;
+ unsigned int etherStatsOctets;
+ unsigned int etherStatsPkts;
+ unsigned int etherStatsUndersizePkts;
+ unsigned int etherStatsOversizePkts;
+ unsigned int etherStatsPkts64Octets;
+ unsigned int etherStatsPkts65to127Octets;
+ unsigned int etherStatsPkts128to255Octets;
+ unsigned int etherStatsPkts256to511Octets;
+ unsigned int etherStatsPkts512to1023Octets;
+ unsigned int etherStatsPkts1024to1518Octets;
+
+ unsigned int etherStatsPkts1519toXOctets;
+ unsigned int etherStatsJabbers;
+ unsigned int etherStatsFragments;
+
+ unsigned int reservedxE4;
+
+ /*FIFO control register. */
+ alt_tse_tx_cmd_stat tx_cmd_stat;
+ alt_tse_rx_cmd_stat rx_cmd_stat;
+
+ unsigned int ipaccTxConf;
+ unsigned int ipaccRxConf;
+ unsigned int ipaccRxStat;
+ unsigned int ipaccRxStatSum;
+
+ /*Multicast address resolution table */
+ unsigned int hash_table[64];
+
+ /*Registers 0 to 31 within PHY device 0/1 */
+ struct alt_tse_mdio mdio_phy0;
+ struct alt_tse_mdio mdio_phy1;
+
+ /*4 Supplemental MAC Addresses */
+ unsigned int supp_mac_addr_0_0;
+ unsigned int supp_mac_addr_0_1;
+ unsigned int supp_mac_addr_1_0;
+ unsigned int supp_mac_addr_1_1;
+ unsigned int supp_mac_addr_2_0;
+ unsigned int supp_mac_addr_2_1;
+ unsigned int supp_mac_addr_3_0;
+ unsigned int supp_mac_addr_3_1;
+
+ unsigned int reservedx320[56];
+};
+
+/* flags: TSE MII modes */
+/* GMII/MII = 0 */
+/* RGMII = 1 */
+/* RGMII_ID = 2 */
+/* RGMII_TXID = 3 */
+/* RGMII_RXID = 4 */
+/* SGMII = 5 */
+struct altera_tse_priv {
+ char devname[16];
+ volatile struct alt_tse_mac *mac_dev;
+ volatile struct alt_sgdma_registers *sgdma_rx;
+ volatile struct alt_sgdma_registers *sgdma_tx;
+ unsigned int rx_sgdma_irq;
+ unsigned int tx_sgdma_irq;
+ unsigned int has_descriptor_mem;
+ unsigned int descriptor_mem_base;
+ unsigned int descriptor_mem_size;
+ volatile struct alt_sgdma_descriptor *rx_desc;
+ volatile struct alt_sgdma_descriptor *tx_desc;
+ volatile unsigned char *rx_buf;
+ struct phy_info *phyinfo;
+ unsigned int phyaddr;
+ unsigned int flags;
+ unsigned int link;
+ unsigned int duplexity;
+ unsigned int speed;
+};
+
+/* Phy stuff continued */
+/*
+ * struct phy_cmd: A command for reading or writing a PHY register
+ *
+ * mii_reg: The register to read or write
+ *
+ * mii_data: For writes, the value to put in the register.
+ * A value of -1 indicates this is a read.
+ *
+ * funct: A function pointer which is invoked for each command.
+ * For reads, this function will be passed the value read
+ * from the PHY, and process it.
+ * For writes, the result of this function will be written
+ * to the PHY register
+ */
+struct phy_cmd {
+ uint mii_reg;
+ uint mii_data;
+ uint(*funct) (uint mii_reg, struct altera_tse_priv *priv);
+};
+#endif /* _ALTERA_TSE_H_ */
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ec45b63..720e126 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -106,6 +106,7 @@ int bfin_EMAC_initialize(bd_t *bis)
dev->halt = bfin_EMAC_halt;
dev->send = bfin_EMAC_send;
dev->recv = bfin_EMAC_recv;
+ dev->write_hwaddr = bfin_EMAC_setup_addr;
eth_register(dev);
@@ -303,6 +304,19 @@ static int bfin_miiphy_init(struct eth_device *dev, int *opmode)
return 0;
}
+static int bfin_EMAC_setup_addr(struct eth_device *dev)
+{
+ *pEMAC_ADDRLO =
+ dev->enetaddr[0] |
+ dev->enetaddr[1] << 8 |
+ dev->enetaddr[2] << 16 |
+ dev->enetaddr[3] << 24;
+ *pEMAC_ADDRHI =
+ dev->enetaddr[4] |
+ dev->enetaddr[5] << 8;
+ return 0;
+}
+
static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
{
u32 opmode;
@@ -318,7 +332,7 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
return -1;
/* Initialize EMAC address */
- bfin_EMAC_setup_addr(dev->enetaddr);
+ bfin_EMAC_setup_addr(dev);
/* Initialize TX and RX buffer */
for (i = 0; i < PKTBUFSRX; i++) {
@@ -376,18 +390,6 @@ static void bfin_EMAC_halt(struct eth_device *dev)
}
-void bfin_EMAC_setup_addr(uchar *enetaddr)
-{
- *pEMAC_ADDRLO =
- enetaddr[0] |
- enetaddr[1] << 8 |
- enetaddr[2] << 16 |
- enetaddr[3] << 24;
- *pEMAC_ADDRHI =
- enetaddr[4] |
- enetaddr[5] << 8;
-}
-
ADI_ETHER_BUFFER *SetupRxBuffer(int no)
{
ADI_ETHER_FRAME_BUFFER *frmbuf;
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 8f467a3..c731c17 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -60,7 +60,6 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd);
static void bfin_EMAC_halt(struct eth_device *dev);
static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, int length);
static int bfin_EMAC_recv(struct eth_device *dev);
-
-void bfin_EMAC_setup_addr(uchar *enetaddr);
+static int bfin_EMAC_setup_addr(struct eth_device *dev);
#endif
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index a7fef56..137e41f 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -117,12 +117,12 @@ static void DM9000_iow(int reg, u8 value);
/* DM9000 network board routine ---------------------------- */
-#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
-#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
-#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
-#define DM9000_inb(r) (*(volatile u8 *)r)
-#define DM9000_inw(r) (*(volatile u16 *)r)
-#define DM9000_inl(r) (*(volatile u32 *)r)
+#define DM9000_outb(d,r) writeb(d, r)
+#define DM9000_outw(d,r) writew(d, r)
+#define DM9000_outl(d,r) writel(d, r)
+#define DM9000_inb(r) readb(r)
+#define DM9000_inw(r) readw(r)
+#define DM9000_inl(r) readl(r)
#ifdef CONFIG_DM9000_DEBUG
static void
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
new file mode 100644
index 0000000..34cc47f
--- /dev/null
+++ b/drivers/net/ethoc.c
@@ -0,0 +1,511 @@
+/*
+ * Opencore 10/100 ethernet mac driver
+ *
+ * Copyright (C) 2007-2008 Avionic Design Development GmbH
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ * Thierry Reding <thierry.reding@avionic-design.de>
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <net.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+
+/* register offsets */
+#define MODER 0x00
+#define INT_SOURCE 0x04
+#define INT_MASK 0x08
+#define IPGT 0x0c
+#define IPGR1 0x10
+#define IPGR2 0x14
+#define PACKETLEN 0x18
+#define COLLCONF 0x1c
+#define TX_BD_NUM 0x20
+#define CTRLMODER 0x24
+#define MIIMODER 0x28
+#define MIICOMMAND 0x2c
+#define MIIADDRESS 0x30
+#define MIITX_DATA 0x34
+#define MIIRX_DATA 0x38
+#define MIISTATUS 0x3c
+#define MAC_ADDR0 0x40
+#define MAC_ADDR1 0x44
+#define ETH_HASH0 0x48
+#define ETH_HASH1 0x4c
+#define ETH_TXCTRL 0x50
+
+/* mode register */
+#define MODER_RXEN (1 << 0) /* receive enable */
+#define MODER_TXEN (1 << 1) /* transmit enable */
+#define MODER_NOPRE (1 << 2) /* no preamble */
+#define MODER_BRO (1 << 3) /* broadcast address */
+#define MODER_IAM (1 << 4) /* individual address mode */
+#define MODER_PRO (1 << 5) /* promiscuous mode */
+#define MODER_IFG (1 << 6) /* interframe gap for incoming frames */
+#define MODER_LOOP (1 << 7) /* loopback */
+#define MODER_NBO (1 << 8) /* no back-off */
+#define MODER_EDE (1 << 9) /* excess defer enable */
+#define MODER_FULLD (1 << 10) /* full duplex */
+#define MODER_RESET (1 << 11) /* FIXME: reset (undocumented) */
+#define MODER_DCRC (1 << 12) /* delayed CRC enable */
+#define MODER_CRC (1 << 13) /* CRC enable */
+#define MODER_HUGE (1 << 14) /* huge packets enable */
+#define MODER_PAD (1 << 15) /* padding enabled */
+#define MODER_RSM (1 << 16) /* receive small packets */
+
+/* interrupt source and mask registers */
+#define INT_MASK_TXF (1 << 0) /* transmit frame */
+#define INT_MASK_TXE (1 << 1) /* transmit error */
+#define INT_MASK_RXF (1 << 2) /* receive frame */
+#define INT_MASK_RXE (1 << 3) /* receive error */
+#define INT_MASK_BUSY (1 << 4)
+#define INT_MASK_TXC (1 << 5) /* transmit control frame */
+#define INT_MASK_RXC (1 << 6) /* receive control frame */
+
+#define INT_MASK_TX (INT_MASK_TXF | INT_MASK_TXE)
+#define INT_MASK_RX (INT_MASK_RXF | INT_MASK_RXE)
+
+#define INT_MASK_ALL ( \
+ INT_MASK_TXF | INT_MASK_TXE | \
+ INT_MASK_RXF | INT_MASK_RXE | \
+ INT_MASK_TXC | INT_MASK_RXC | \
+ INT_MASK_BUSY \
+ )
+
+/* packet length register */
+#define PACKETLEN_MIN(min) (((min) & 0xffff) << 16)
+#define PACKETLEN_MAX(max) (((max) & 0xffff) << 0)
+#define PACKETLEN_MIN_MAX(min, max) (PACKETLEN_MIN(min) | \
+ PACKETLEN_MAX(max))
+
+/* transmit buffer number register */
+#define TX_BD_NUM_VAL(x) (((x) <= 0x80) ? (x) : 0x80)
+
+/* control module mode register */
+#define CTRLMODER_PASSALL (1 << 0) /* pass all receive frames */
+#define CTRLMODER_RXFLOW (1 << 1) /* receive control flow */
+#define CTRLMODER_TXFLOW (1 << 2) /* transmit control flow */
+
+/* MII mode register */
+#define MIIMODER_CLKDIV(x) ((x) & 0xfe) /* needs to be an even number */
+#define MIIMODER_NOPRE (1 << 8) /* no preamble */
+
+/* MII command register */
+#define MIICOMMAND_SCAN (1 << 0) /* scan status */
+#define MIICOMMAND_READ (1 << 1) /* read status */
+#define MIICOMMAND_WRITE (1 << 2) /* write control data */
+
+/* MII address register */
+#define MIIADDRESS_FIAD(x) (((x) & 0x1f) << 0)
+#define MIIADDRESS_RGAD(x) (((x) & 0x1f) << 8)
+#define MIIADDRESS_ADDR(phy, reg) (MIIADDRESS_FIAD(phy) | \
+ MIIADDRESS_RGAD(reg))
+
+/* MII transmit data register */
+#define MIITX_DATA_VAL(x) ((x) & 0xffff)
+
+/* MII receive data register */
+#define MIIRX_DATA_VAL(x) ((x) & 0xffff)
+
+/* MII status register */
+#define MIISTATUS_LINKFAIL (1 << 0)
+#define MIISTATUS_BUSY (1 << 1)
+#define MIISTATUS_INVALID (1 << 2)
+
+/* TX buffer descriptor */
+#define TX_BD_CS (1 << 0) /* carrier sense lost */
+#define TX_BD_DF (1 << 1) /* defer indication */
+#define TX_BD_LC (1 << 2) /* late collision */
+#define TX_BD_RL (1 << 3) /* retransmission limit */
+#define TX_BD_RETRY_MASK (0x00f0)
+#define TX_BD_RETRY(x) (((x) & 0x00f0) >> 4)
+#define TX_BD_UR (1 << 8) /* transmitter underrun */
+#define TX_BD_CRC (1 << 11) /* TX CRC enable */
+#define TX_BD_PAD (1 << 12) /* pad enable */
+#define TX_BD_WRAP (1 << 13)
+#define TX_BD_IRQ (1 << 14) /* interrupt request enable */
+#define TX_BD_READY (1 << 15) /* TX buffer ready */
+#define TX_BD_LEN(x) (((x) & 0xffff) << 16)
+#define TX_BD_LEN_MASK (0xffff << 16)
+
+#define TX_BD_STATS (TX_BD_CS | TX_BD_DF | TX_BD_LC | \
+ TX_BD_RL | TX_BD_RETRY_MASK | TX_BD_UR)
+
+/* RX buffer descriptor */
+#define RX_BD_LC (1 << 0) /* late collision */
+#define RX_BD_CRC (1 << 1) /* RX CRC error */
+#define RX_BD_SF (1 << 2) /* short frame */
+#define RX_BD_TL (1 << 3) /* too long */
+#define RX_BD_DN (1 << 4) /* dribble nibble */
+#define RX_BD_IS (1 << 5) /* invalid symbol */
+#define RX_BD_OR (1 << 6) /* receiver overrun */
+#define RX_BD_MISS (1 << 7)
+#define RX_BD_CF (1 << 8) /* control frame */
+#define RX_BD_WRAP (1 << 13)
+#define RX_BD_IRQ (1 << 14) /* interrupt request enable */
+#define RX_BD_EMPTY (1 << 15)
+#define RX_BD_LEN(x) (((x) & 0xffff) << 16)
+
+#define RX_BD_STATS (RX_BD_LC | RX_BD_CRC | RX_BD_SF | RX_BD_TL | \
+ RX_BD_DN | RX_BD_IS | RX_BD_OR | RX_BD_MISS)
+
+#define ETHOC_BUFSIZ 1536
+#define ETHOC_ZLEN 64
+#define ETHOC_BD_BASE 0x400
+#define ETHOC_TIMEOUT (HZ / 2)
+#define ETHOC_MII_TIMEOUT (1 + (HZ / 5))
+
+/**
+ * struct ethoc - driver-private device structure
+ * @num_tx: number of send buffers
+ * @cur_tx: last send buffer written
+ * @dty_tx: last buffer actually sent
+ * @num_rx: number of receive buffers
+ * @cur_rx: current receive buffer
+ */
+struct ethoc {
+ u32 num_tx;
+ u32 cur_tx;
+ u32 dty_tx;
+ u32 num_rx;
+ u32 cur_rx;
+};
+
+/**
+ * struct ethoc_bd - buffer descriptor
+ * @stat: buffer statistics
+ * @addr: physical memory address
+ */
+struct ethoc_bd {
+ u32 stat;
+ u32 addr;
+};
+
+static inline u32 ethoc_read(struct eth_device *dev, loff_t offset)
+{
+ return readl(dev->iobase + offset);
+}
+
+static inline void ethoc_write(struct eth_device *dev, loff_t offset, u32 data)
+{
+ writel(data, dev->iobase + offset);
+}
+
+static inline void ethoc_read_bd(struct eth_device *dev, int index,
+ struct ethoc_bd *bd)
+{
+ loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
+ bd->stat = ethoc_read(dev, offset + 0);
+ bd->addr = ethoc_read(dev, offset + 4);
+}
+
+static inline void ethoc_write_bd(struct eth_device *dev, int index,
+ const struct ethoc_bd *bd)
+{
+ loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
+ ethoc_write(dev, offset + 0, bd->stat);
+ ethoc_write(dev, offset + 4, bd->addr);
+}
+
+static int ethoc_set_mac_address(struct eth_device *dev)
+{
+ u8 *mac = dev->enetaddr;
+
+ ethoc_write(dev, MAC_ADDR0, (mac[2] << 24) | (mac[3] << 16) |
+ (mac[4] << 8) | (mac[5] << 0));
+ ethoc_write(dev, MAC_ADDR1, (mac[0] << 8) | (mac[1] << 0));
+ return 0;
+}
+
+static inline void ethoc_ack_irq(struct eth_device *dev, u32 mask)
+{
+ ethoc_write(dev, INT_SOURCE, mask);
+}
+
+static inline void ethoc_enable_rx_and_tx(struct eth_device *dev)
+{
+ u32 mode = ethoc_read(dev, MODER);
+ mode |= MODER_RXEN | MODER_TXEN;
+ ethoc_write(dev, MODER, mode);
+}
+
+static inline void ethoc_disable_rx_and_tx(struct eth_device *dev)
+{
+ u32 mode = ethoc_read(dev, MODER);
+ mode &= ~(MODER_RXEN | MODER_TXEN);
+ ethoc_write(dev, MODER, mode);
+}
+
+static int ethoc_init_ring(struct eth_device *dev)
+{
+ struct ethoc *priv = (struct ethoc *)dev->priv;
+ struct ethoc_bd bd;
+ int i;
+
+ priv->cur_tx = 0;
+ priv->dty_tx = 0;
+ priv->cur_rx = 0;
+
+ /* setup transmission buffers */
+ bd.stat = TX_BD_IRQ | TX_BD_CRC;
+
+ for (i = 0; i < priv->num_tx; i++) {
+ if (i == priv->num_tx - 1)
+ bd.stat |= TX_BD_WRAP;
+
+ ethoc_write_bd(dev, i, &bd);
+ }
+
+ bd.stat = RX_BD_EMPTY | RX_BD_IRQ;
+
+ for (i = 0; i < priv->num_rx; i++) {
+ bd.addr = (u32)NetRxPackets[i];
+ if (i == priv->num_rx - 1)
+ bd.stat |= RX_BD_WRAP;
+
+ flush_dcache(bd.addr, PKTSIZE_ALIGN);
+ ethoc_write_bd(dev, priv->num_tx + i, &bd);
+ }
+
+ return 0;
+}
+
+static int ethoc_reset(struct eth_device *dev)
+{
+ u32 mode;
+
+ /* TODO: reset controller? */
+
+ ethoc_disable_rx_and_tx(dev);
+
+ /* TODO: setup registers */
+
+ /* enable FCS generation and automatic padding */
+ mode = ethoc_read(dev, MODER);
+ mode |= MODER_CRC | MODER_PAD;
+ ethoc_write(dev, MODER, mode);
+
+ /* set full-duplex mode */
+ mode = ethoc_read(dev, MODER);
+ mode |= MODER_FULLD;
+ ethoc_write(dev, MODER, mode);
+ ethoc_write(dev, IPGT, 0x15);
+
+ ethoc_ack_irq(dev, INT_MASK_ALL);
+ ethoc_enable_rx_and_tx(dev);
+ return 0;
+}
+
+static int ethoc_init(struct eth_device *dev, bd_t * bd)
+{
+ struct ethoc *priv = (struct ethoc *)dev->priv;
+ printf("ethoc\n");
+
+ priv->num_tx = 1;
+ priv->num_rx = PKTBUFSRX;
+ ethoc_write(dev, TX_BD_NUM, priv->num_tx);
+ ethoc_init_ring(dev);
+ ethoc_reset(dev);
+
+ return 0;
+}
+
+static int ethoc_update_rx_stats(struct ethoc_bd *bd)
+{
+ int ret = 0;
+
+ if (bd->stat & RX_BD_TL) {
+ debug("ETHOC: " "RX: frame too long\n");
+ ret++;
+ }
+
+ if (bd->stat & RX_BD_SF) {
+ debug("ETHOC: " "RX: frame too short\n");
+ ret++;
+ }
+
+ if (bd->stat & RX_BD_DN)
+ debug("ETHOC: " "RX: dribble nibble\n");
+
+ if (bd->stat & RX_BD_CRC) {
+ debug("ETHOC: " "RX: wrong CRC\n");
+ ret++;
+ }
+
+ if (bd->stat & RX_BD_OR) {
+ debug("ETHOC: " "RX: overrun\n");
+ ret++;
+ }
+
+ if (bd->stat & RX_BD_LC) {
+ debug("ETHOC: " "RX: late collision\n");
+ ret++;
+ }
+
+ return ret;
+}
+
+static int ethoc_rx(struct eth_device *dev, int limit)
+{
+ struct ethoc *priv = (struct ethoc *)dev->priv;
+ int count;
+
+ for (count = 0; count < limit; ++count) {
+ u32 entry;
+ struct ethoc_bd bd;
+
+ entry = priv->num_tx + (priv->cur_rx % priv->num_rx);
+ ethoc_read_bd(dev, entry, &bd);
+ if (bd.stat & RX_BD_EMPTY)
+ break;
+
+ debug("%s(): RX buffer %d, %x received\n",
+ __func__, priv->cur_rx, bd.stat);
+ if (ethoc_update_rx_stats(&bd) == 0) {
+ int size = bd.stat >> 16;
+ size -= 4; /* strip the CRC */
+ NetReceive((void *)bd.addr, size);
+ }
+
+ /* clear the buffer descriptor so it can be reused */
+ flush_dcache(bd.addr, PKTSIZE_ALIGN);
+ bd.stat &= ~RX_BD_STATS;
+ bd.stat |= RX_BD_EMPTY;
+ ethoc_write_bd(dev, entry, &bd);
+ priv->cur_rx++;
+ }
+
+ return count;
+}
+
+static int ethoc_update_tx_stats(struct ethoc_bd *bd)
+{
+ if (bd->stat & TX_BD_LC)
+ debug("ETHOC: " "TX: late collision\n");
+
+ if (bd->stat & TX_BD_RL)
+ debug("ETHOC: " "TX: retransmit limit\n");
+
+ if (bd->stat & TX_BD_UR)
+ debug("ETHOC: " "TX: underrun\n");
+
+ if (bd->stat & TX_BD_CS)
+ debug("ETHOC: " "TX: carrier sense lost\n");
+
+ return 0;
+}
+
+static void ethoc_tx(struct eth_device *dev)
+{
+ struct ethoc *priv = (struct ethoc *)dev->priv;
+ u32 entry = priv->dty_tx % priv->num_tx;
+ struct ethoc_bd bd;
+
+ ethoc_read_bd(dev, entry, &bd);
+ if ((bd.stat & TX_BD_READY) == 0)
+ (void)ethoc_update_tx_stats(&bd);
+}
+
+static int ethoc_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ struct ethoc *priv = (struct ethoc *)dev->priv;
+ struct ethoc_bd bd;
+ u32 entry;
+ u32 pending;
+ int tmo;
+
+ entry = priv->cur_tx % priv->num_tx;
+ ethoc_read_bd(dev, entry, &bd);
+ if (unlikely(length < ETHOC_ZLEN))
+ bd.stat |= TX_BD_PAD;
+ else
+ bd.stat &= ~TX_BD_PAD;
+ bd.addr = (u32)packet;
+
+ flush_dcache(bd.addr, length);
+ bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
+ bd.stat |= TX_BD_LEN(length);
+ ethoc_write_bd(dev, entry, &bd);
+
+ /* start transmit */
+ bd.stat |= TX_BD_READY;
+ ethoc_write_bd(dev, entry, &bd);
+
+ /* wait for transfer to succeed */
+ tmo = get_timer(0) + 5 * CONFIG_SYS_HZ;
+ while (1) {
+ pending = ethoc_read(dev, INT_SOURCE);
+ ethoc_ack_irq(dev, pending & ~INT_MASK_RX);
+ if (pending & INT_MASK_BUSY)
+ debug("%s(): packet dropped\n", __func__);
+
+ if (pending & INT_MASK_TX) {
+ ethoc_tx(dev);
+ break;
+ }
+ if (get_timer(0) >= tmo) {
+ debug("%s(): timed out\n", __func__);
+ return -1;
+ }
+ }
+
+ debug("%s(): packet sent\n", __func__);
+ return 0;
+}
+
+static void ethoc_halt(struct eth_device *dev)
+{
+ ethoc_disable_rx_and_tx(dev);
+}
+
+static int ethoc_recv(struct eth_device *dev)
+{
+ u32 pending;
+
+ pending = ethoc_read(dev, INT_SOURCE);
+ ethoc_ack_irq(dev, pending);
+ if (pending & INT_MASK_BUSY)
+ debug("%s(): packet dropped\n", __func__);
+ if (pending & INT_MASK_RX) {
+ debug("%s(): rx irq\n", __func__);
+ ethoc_rx(dev, PKTBUFSRX);
+ }
+
+ return 0;
+}
+
+int ethoc_initialize(u8 dev_num, int base_addr)
+{
+ struct ethoc *priv;
+ struct eth_device *dev;
+
+ priv = malloc(sizeof(*priv));
+ if (!priv)
+ return 0;
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ free(priv);
+ return 0;
+ }
+
+ memset(dev, 0, sizeof(*dev));
+ dev->priv = priv;
+ dev->iobase = base_addr;
+ dev->init = ethoc_init;
+ dev->halt = ethoc_halt;
+ dev->send = ethoc_send;
+ dev->recv = ethoc_recv;
+ dev->write_hwaddr = ethoc_set_mac_address;
+ sprintf(dev->name, "%s-%hu", "ETHOC", dev_num);
+
+ eth_register(dev);
+ return 1;
+}
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 8c4ade5..57f89a3 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -314,9 +314,9 @@ static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac)
{
/*
* The MX27 can store the mac address in internal eeprom
- * This mechanism is not supported now by MX51
+ * This mechanism is not supported now by MX51 or MX25
*/
-#ifdef CONFIG_MX51
+#if defined(CONFIG_MX51) || defined(CONFIG_MX25)
return -1;
#else
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
@@ -325,7 +325,7 @@ static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac)
for (i = 0; i < 6; i++)
mac[6-1-i] = readl(&iim->iim_bank_area0[IIM0_MAC + i]);
- return is_valid_ether_addr(mac);
+ return !is_valid_ether_addr(mac);
#endif
}
@@ -505,7 +505,6 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
miiphy_restart_aneg(dev);
fec_open(dev);
- fec_set_hwaddr(dev);
return 0;
}
@@ -713,6 +712,7 @@ static int fec_probe(bd_t *bd)
edev->send = fec_send;
edev->recv = fec_recv;
edev->halt = fec_halt;
+ edev->write_hwaddr = fec_set_hwaddr;
fec->eth = (struct ethernet_regs *)IMX_FEC_BASE;
fec->bd = bd;
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
index 2ad7fea..932792e 100644
--- a/drivers/net/kirkwood_egiga.c
+++ b/drivers/net/kirkwood_egiga.c
@@ -424,8 +424,6 @@ static int kwgbe_init(struct eth_device *dev)
KWGBEREG_WR(regs->pxc, PRT_CFG_VAL);
KWGBEREG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE);
KWGBEREG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
- /* Disable port initially */
- KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN);
/* Assign port SDMA configuration */
KWGBEREG_WR(regs->sdc, PORT_SDMA_CFG_VALUE);
@@ -438,6 +436,9 @@ static int kwgbe_init(struct eth_device *dev)
KWGBEREG_WR(regs->psc0, KWGBE_MAX_RX_PACKET_9700BYTE
| (KWGBEREG_RD(regs->psc0) & MRU_MASK));
+ /* Enable port initially */
+ KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN);
+
/*
* Set ethernet MTU for leaky bucket mechanism to 0 - this will
* disable the leaky bucket mechanism .
@@ -445,7 +446,7 @@ static int kwgbe_init(struct eth_device *dev)
KWGBEREG_WR(regs->pmtu, 0);
/* Assignment of Rx CRDB of given RXUQ */
- KWGBEREG_WR(regs->rxcdp[RXUQ].rxcdp, (u32) dkwgbe->p_rxdesc_curr);
+ KWGBEREG_WR(regs->rxcdp[RXUQ], (u32) dkwgbe->p_rxdesc_curr);
/* Enable port Rx. */
KWGBEREG_WR(regs->rqc, (1 << RXUQ));
@@ -480,7 +481,7 @@ static int kwgbe_halt(struct eth_device *dev)
stop_queue(&regs->tqc);
stop_queue(&regs->rqc);
- /* Enable port */
+ /* Disable port */
KWGBEREG_BITS_RESET(regs->psc0, KWGBE_SERIAL_PORT_EN);
/* Set port is not reset */
KWGBEREG_BITS_RESET(regs->psc1, 1 << 4);
@@ -497,6 +498,16 @@ static int kwgbe_halt(struct eth_device *dev)
return 0;
}
+static int kwgbe_write_hwaddr(struct eth_device *dev)
+{
+ struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
+ struct kwgbe_registers *regs = dkwgbe->regs;
+
+ /* Programs net device MAC address after initialization */
+ port_uc_addr_set(regs, dkwgbe->dev.enetaddr);
+ return 0;
+}
+
static int kwgbe_send(struct eth_device *dev, volatile void *dataptr,
int datasize)
{
@@ -525,7 +536,7 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr,
p_txdesc->buf_ptr = (u8 *) p;
p_txdesc->byte_cnt = datasize;
- /* Apply send command using zeroth RXUQ */
+ /* Apply send command using zeroth TXUQ */
KWGBEREG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc);
KWGBEREG_WR(regs->tqc, (1 << TXUQ));
@@ -606,7 +617,7 @@ static int kwgbe_recv(struct eth_device *dev)
p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
p_rxdesc_curr->byte_cnt = 0;
- writel((unsigned)p_rxdesc_curr->nxtdesc_p, &dkwgbe->p_rxdesc_curr);
+ writel((unsigned)p_rxdesc_curr->nxtdesc_p, (u32) &dkwgbe->p_rxdesc_curr);
return 0;
}
@@ -693,6 +704,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
dev->halt = (void *)kwgbe_halt;
dev->send = (void *)kwgbe_send;
dev->recv = (void *)kwgbe_recv;
+ dev->write_hwaddr = (void *)kwgbe_write_hwaddr;
eth_register(dev);
diff --git a/drivers/net/kirkwood_egiga.h b/drivers/net/kirkwood_egiga.h
index 16d5214..30c773c 100644
--- a/drivers/net/kirkwood_egiga.h
+++ b/drivers/net/kirkwood_egiga.h
@@ -418,7 +418,7 @@ struct kwgbe_registers {
u32 pmtbs;
u8 pad14[0x60c - 0x4ec - 4];
struct kwgbe_rxcdp rxcdp[7];
- u32 rxcdp7;
+ struct kwgbe_rxdesc *rxcdp7;
u32 rqc;
struct kwgbe_txdesc *tcsdp;
u8 pad15[0x6c0 - 0x684 - 4];
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index 90e4002..810079f 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -795,7 +795,6 @@ int lan91c96_initialize(u8 dev_num, int base_addr)
dev = malloc(sizeof(*dev));
if (!dev) {
- free(dev);
return 0;
}
memset(dev, 0, sizeof(*dev));
diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c
index 4acc29e..060bdd7 100644
--- a/drivers/net/mcfmii.c
+++ b/drivers/net/mcfmii.c
@@ -175,38 +175,39 @@ int mii_discover_phy(struct eth_device *dev)
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type\n", phytype, pass);
#endif
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype <<= 16;
- phytype |=
- mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+ if (phytype == 0xffff)
+ continue;
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
#ifdef ET_DEBUG
- printf("PHY @ 0x%x pass %d\n", phyno, pass);
+ printf("PHY @ 0x%x pass %d\n", phyno, pass);
#endif
- for (i = 0; i < (sizeof(phyinfo) / sizeof(phy_info_t)); i++) {
- if (phyinfo[i].phyid == phytype) {
+ for (i = 0; (i < (sizeof(phyinfo) / sizeof(phy_info_t)))
+ && (phyinfo[i].phyid != 0); i++) {
+ if (phyinfo[i].phyid == phytype) {
#ifdef ET_DEBUG
- printf("phyid %x - %s\n",
- phyinfo[i].phyid,
- phyinfo[i].strid);
+ printf("phyid %x - %s\n",
+ phyinfo[i].phyid,
+ phyinfo[i].strid);
#endif
- strcpy(info->phy_name, phyinfo[i].strid);
- info->phyname_init = 1;
- found = 1;
- break;
- }
+ strcpy(info->phy_name, phyinfo[i].strid);
+ info->phyname_init = 1;
+ found = 1;
+ break;
}
+ }
- if (!found) {
+ if (!found) {
#ifdef ET_DEBUG
- printf("0x%08x\n", phytype);
+ printf("0x%08x\n", phytype);
#endif
- strcpy(info->phy_name, "unknown");
- info->phyname_init = 1;
- break;
- }
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
}
}
}
diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
index fb2c19a..c580c82 100644
--- a/drivers/net/mpc512x_fec.c
+++ b/drivers/net/mpc512x_fec.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2003-2009
+ * (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Derived from the MPC8xx FEC driver.
@@ -25,10 +25,6 @@ DECLARE_GLOBAL_DATA_PTR;
#error "CONFIG_MII has to be defined!"
#endif
-#if (DEBUG & 0x40)
-static u32 local_crc32(char *string, unsigned int crc_value, int len);
-#endif
-
int fec512x_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
int fec512x_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data);
int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
@@ -164,7 +160,7 @@ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
}
/********************************************************************/
-static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
+static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, unsigned char *mac)
{
u8 currByte; /* byte for which to compute the CRC */
int byte; /* loop - counter */
@@ -230,6 +226,12 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
printf ("mpc512x_fec_init... Begin\n");
#endif
+ mpc512x_fec_set_hwaddr (fec, dev->enetaddr);
+ out_be32(&fec->eth->gaddr1, 0x00000000);
+ out_be32(&fec->eth->gaddr2, 0x00000000);
+
+ mpc512x_fec_init_phy (dev, bis);
+
/* Set interrupt mask register */
out_be32(&fec->eth->imask, 0x00000000);
@@ -615,8 +617,6 @@ int mpc512x_fec_initialize (bd_t * bis)
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
mpc512x_fec_priv *fec;
struct eth_device *dev;
- int i;
- char *tmp, *end, env_enetaddr[6];
void * bd;
fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
@@ -667,25 +667,6 @@ int mpc512x_fec_initialize (bd_t * bis)
*/
out_be32(&fec->eth->ievent, 0xffffffff);
- /*
- * Try to set the mac address now. The fec mac address is
- * a garbage after reset. When not using fec for booting
- * the Linux fec driver will try to work with this garbage.
- */
- tmp = getenv ("ethaddr");
- if (tmp) {
- for (i=0; i<6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
- mpc512x_fec_set_hwaddr (fec, env_enetaddr);
- out_be32(&fec->eth->gaddr1, 0x00000000);
- out_be32(&fec->eth->gaddr2, 0x00000000);
- }
-
- mpc512x_fec_init_phy (dev, bis);
-
return 1;
}
@@ -775,39 +756,4 @@ int fec512x_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
return 0;
}
-#if (DEBUG & 0x40)
-static u32 local_crc32 (char *string, unsigned int crc_value, int len)
-{
- int i;
- char c;
- unsigned int crc, count;
-
- /*
- * crc32 algorithm
- */
- /*
- * crc = 0xffffffff; * The initialized value should be 0xffffffff
- */
- crc = crc_value;
-
- for (i = len; --i >= 0;) {
- c = *string++;
- for (count = 0; count < 8; count++) {
- if ((c & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- c >>= 1;
- }
- }
-
- /*
- * In big endian system, do byte swaping for crc value
- */
- /**/ return crc;
-}
-#endif /* DEBUG */
-
#endif /* CONFIG_MPC512x_FEC */
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index c2b1bbd..1681e26 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* This file is based on mpc4200fec.c,
@@ -28,10 +28,6 @@ static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec);
static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec);
#endif /* DEBUG */
-#if (DEBUG & 0x40)
-static uint32 local_crc32(char *string, unsigned int crc_value, int len);
-#endif
-
typedef struct {
uint8 data[1500]; /* actual data */
int length; /* actual length */
@@ -1019,38 +1015,3 @@ int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 dat
return 0;
}
-
-#if (DEBUG & 0x40)
-static uint32 local_crc32(char *string, unsigned int crc_value, int len)
-{
- int i;
- char c;
- unsigned int crc, count;
-
- /*
- * crc32 algorithm
- */
- /*
- * crc = 0xffffffff; * The initialized value should be 0xffffffff
- */
- crc = crc_value;
-
- for (i = len; --i >= 0;) {
- c = *string++;
- for (count = 0; count < 8; count++) {
- if ((c & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- c >>= 1;
- }
- }
-
- /*
- * In big endian system, do byte swaping for crc value
- */
- /**/ return crc;
-}
-#endif /* DEBUG */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index cac08d0..3da4c35 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -220,7 +220,7 @@ static int smc911x_rx(struct eth_device *dev)
smc911x_reg_write(dev, RX_CFG, 0);
- tmplen = (pktlen + 2+ 3) / 4;
+ tmplen = (pktlen + 3) / 4;
while (tmplen--)
*data++ = pkt_data_pull(dev, RX_DATA_FIFO);
@@ -242,7 +242,6 @@ int smc911x_initialize(u8 dev_num, int base_addr)
dev = malloc(sizeof(*dev));
if (!dev) {
- free(dev);
return -1;
}
memset(dev, 0, sizeof(*dev));
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index fd49eff..3e4c3bd 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -1082,7 +1082,8 @@ static void tsec_halt(struct eth_device *dev)
regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
- while (!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))) ;
+ while ((regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))
+ != (IEVENT_GRSC | IEVENT_GTSC)) ;
regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 27dc500..ccbf27d 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -595,8 +595,7 @@ static void phy_change(struct eth_device *dev)
adjust_link(dev);
}
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
/*
* Find a device index from the devlist by name
@@ -1388,8 +1387,7 @@ int uec_initialize(bd_t *bis, uec_info_t *uec_info)
return err;
}
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register(dev->name, uec_miiphy_read, uec_miiphy_write);
#endif
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index fa48fea..3baffe4 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -93,6 +93,27 @@ static const struct fixed_phy_port fixed_phy_port[] = {
CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
};
+/*--------------------------------------------------------------------+
+ * BitBang MII support for ethernet ports
+ *
+ * Based from MPC8560ADS implementation
+ *--------------------------------------------------------------------*/
+/*
+ * Example board header file to define bitbang ethernet ports:
+ *
+ * #define CONFIG_SYS_BITBANG_PHY_PORT(name) name,
+ * #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("FSL UEC0")
+*/
+#ifndef CONFIG_SYS_BITBANG_PHY_PORTS
+#define CONFIG_SYS_BITBANG_PHY_PORTS /* default is an empty array */
+#endif
+
+#if defined(CONFIG_BITBANGMII)
+static const char *bitbang_phy_port[] = {
+ CONFIG_SYS_BITBANG_PHY_PORTS /* defined in board configuration file */
+};
+#endif /* CONFIG_BITBANGMII */
+
static void config_genmii_advert (struct uec_mii_info *mii_info);
static void genmii_setup_forced (struct uec_mii_info *mii_info);
static void genmii_restart_aneg (struct uec_mii_info *mii_info);
@@ -113,6 +134,19 @@ void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int valu
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
u32 tmp_reg;
+
+#if defined(CONFIG_BITBANGMII)
+ u32 i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
+ if (strncmp(dev->name, bitbang_phy_port[i],
+ sizeof(dev->name)) == 0) {
+ (void)bb_miiphy_write(NULL, mii_id, regnum, value);
+ return;
+ }
+ }
+#endif /* CONFIG_BITBANGMII */
+
ug_regs = ugeth->uec_mii_regs;
/* Stop the MII management read cycle */
@@ -140,6 +174,19 @@ int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
u32 tmp_reg;
u16 value;
+
+#if defined(CONFIG_BITBANGMII)
+ u32 i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
+ if (strncmp(dev->name, bitbang_phy_port[i],
+ sizeof(dev->name)) == 0) {
+ (void)bb_miiphy_read(NULL, mii_id, regnum, &value);
+ return (value);
+ }
+ }
+#endif /* CONFIG_BITBANGMII */
+
ug_regs = ugeth->uec_mii_regs;
/* Setting up the MII Mangement Address Register */
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 23c0f76..7e833fd 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -7,6 +7,8 @@
#include <config.h>
#include <ns16550.h>
#include <watchdog.h>
+#include <linux/types.h>
+#include <asm/io.h>
#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
#define UART_MCRVAL (UART_MCR_DTR | \
@@ -14,28 +16,35 @@
#define UART_FCRVAL (UART_FCR_FIFO_EN | \
UART_FCR_RXSR | \
UART_FCR_TXSR) /* Clear & enable FIFOs */
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+#define serial_out(x,y) outb(x,(ulong)y)
+#define serial_in(y) inb((ulong)y)
+#else
+#define serial_out(x,y) writeb(x,y)
+#define serial_in(y) readb(y)
+#endif
void NS16550_init (NS16550_t com_port, int baud_divisor)
{
- com_port->ier = 0x00;
+ serial_out(0x00, &com_port->ier);
#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
- com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
+ serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
- com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
- com_port->dll = 0;
- com_port->dlm = 0;
- com_port->lcr = UART_LCRVAL;
- com_port->mcr = UART_MCRVAL;
- com_port->fcr = UART_FCRVAL;
- com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = UART_LCRVAL;
+ serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr);
+ serial_out(0, &com_port->dll);
+ serial_out(0, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
+ serial_out(UART_MCRVAL, &com_port->mcr);
+ serial_out(UART_FCRVAL, &com_port->fcr);
+ serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+ serial_out(baud_divisor & 0xff, &com_port->dll);
+ serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
#if defined(CONFIG_APTIX)
- com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
+ serial_out(3, &com_port->mdr1); /* /13 mode so Aptix 6MHz can hit 115200 */
#else
- com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */
+ serial_out(0, &com_port->mdr1); /* /16 is proper to hit 115200 with 48MHz */
#endif
#endif /* CONFIG_OMAP */
}
@@ -43,42 +52,42 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
{
- com_port->ier = 0x00;
- com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
- com_port->dll = 0;
- com_port->dlm = 0;
- com_port->lcr = UART_LCRVAL;
- com_port->mcr = UART_MCRVAL;
- com_port->fcr = UART_FCRVAL;
- com_port->lcr = UART_LCR_BKSE;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = UART_LCRVAL;
+ serial_out(0x00, &com_port->ier);
+ serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+ serial_out(0, &com_port->dll);
+ serial_out(0, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
+ serial_out(UART_MCRVAL, &com_port->mcr);
+ serial_out(UART_FCRVAL, &com_port->fcr);
+ serial_out(UART_LCR_BKSE, &com_port->lcr);
+ serial_out(baud_divisor & 0xff, &com_port->dll);
+ serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
void NS16550_putc (NS16550_t com_port, char c)
{
- while ((com_port->lsr & UART_LSR_THRE) == 0);
- com_port->thr = c;
+ while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
+ serial_out(c, &com_port->thr);
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
char NS16550_getc (NS16550_t com_port)
{
- while ((com_port->lsr & UART_LSR_DR) == 0) {
+ while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
#ifdef CONFIG_USB_TTY
extern void usbtty_poll(void);
usbtty_poll();
#endif
WATCHDOG_RESET();
}
- return (com_port->rbr);
+ return serial_in(&com_port->rbr);
}
int NS16550_tstc (NS16550_t com_port)
{
- return ((com_port->lsr & UART_LSR_DR) != 0);
+ return ((serial_in(&com_port->lsr) & UART_LSR_DR) != 0);
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c
index f18f7f4..f383011 100644
--- a/drivers/serial/opencores_yanu.c
+++ b/drivers/serial/opencores_yanu.c
@@ -69,7 +69,7 @@ void serial_setbrg (void)
#else
void serial_setbrg (void)
-{
+{
int n, k;
const unsigned max_uns = 0xFFFFFFFF;
unsigned best_n, best_m, baud;
@@ -114,12 +114,14 @@ int serial_init (void)
YANU_ACTION_RFE | YANU_ACTION_RFIFO_CLEAR | YANU_ACTION_TFIFO_CLEAR;
writel(action, &uart->action);
-
- /* control register cleanup */
- /* no interrupts enabled */
- /* one stop bit */
- /* hardware flow control disabled */
- /* 8 bits */
+
+ /*
+ * control register cleanup
+ * no interrupts enabled
+ * one stop bit
+ * hardware flow control disabled
+ * 8 bits
+ */
control = (0x7 << YANU_CONTROL_BITS_POS);
/* enven parity just to be clean */
control |= YANU_CONTROL_PAREVEN;
@@ -146,7 +148,7 @@ void serial_putc (char c)
if (c == '\n')
serial_putc ('\r');
-
+
while (1) {
status = readl(&uart->status);
tx_chars = (status>>YANU_TFIFO_CHARS_POS)
@@ -174,13 +176,13 @@ int serial_tstc(void)
status = readl(&uart->status);
return (((status >> YANU_RFIFO_CHARS_POS) &
((1 << YANU_RFIFO_CHARS_N) - 1)) > 0);
-}
+}
int serial_getc (void)
{
while (serial_tstc() == 0)
WATCHDOG_RESET ();
-
+
/* first we pull the char */
writel(YANU_ACTION_RFIFO_PULL, &uart->action);
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 200b907..f09e55f 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -23,7 +23,6 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libusb_phy.a
COBJS-$(CONFIG_TWL4030_USB) += twl4030.o
-COBJS-y := twl4030.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a5e339a..7d84fc7 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -25,20 +25,19 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libvideo.a
-COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o
+COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
-COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o
-COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o
+COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
+COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
-COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o
+COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
-COBJS-y += videomodes.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 99a595e..7f04b49 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -56,22 +56,7 @@ void lcd_panel_disable(void)
#define msleep(a) udelay(a * 1000)
-#ifndef CONFIG_DISPLAY_VBEST_VGG322403
-#define XRES 240
-#define YRES 320
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 185925
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 9 /* left_margin */
-#define H_SYNC_WIDTH 1 /* hsync_len */
-#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
-#define V_START_WIDTH 7 /* upper_margin */
-#define V_SYNC_WIDTH 1 /* vsync_len */
-#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF 0
-#define IF_CLK_DIV 0x175
-#else /* Display Vbest VGG322403 */
+#if defined(CONFIG_DISPLAY_VBEST_VGG322403)
#define XRES 320
#define YRES 240
#define PANEL_TYPE IPU_PANEL_TFT
@@ -86,6 +71,36 @@ void lcd_panel_disable(void)
#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
#define IF_CONF 0
#define IF_CLK_DIV 0x175
+#elif defined(CONFIG_DISPLAY_COM57H5M10XRC)
+#define XRES 640
+#define YRES 480
+#define PANEL_TYPE IPU_PANEL_TFT
+#define PIXEL_CLK 40000
+#define PIXEL_FMT IPU_PIX_FMT_RGB666
+#define H_START_WIDTH 120 /* left_margin */
+#define H_SYNC_WIDTH 30 /* hsync_len */
+#define H_END_WIDTH (10 + 30) /* right_margin + hsync_len */
+#define V_START_WIDTH 35 /* upper_margin */
+#define V_SYNC_WIDTH 3 /* vsync_len */
+#define V_END_WIDTH (7 + 3) /* lower_margin + vsync_len */
+#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF 0
+#define IF_CLK_DIV 0x175
+#else
+#define XRES 240
+#define YRES 320
+#define PANEL_TYPE IPU_PANEL_TFT
+#define PIXEL_CLK 185925
+#define PIXEL_FMT IPU_PIX_FMT_RGB666
+#define H_START_WIDTH 9 /* left_margin */
+#define H_SYNC_WIDTH 1 /* hsync_len */
+#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
+#define V_START_WIDTH 7 /* upper_margin */
+#define V_SYNC_WIDTH 1 /* vsync_len */
+#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
+#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF 0
+#define IF_CLK_DIV 0x175
#endif
#define LCD_COLOR_IPU LCD_COLOR16
generated by cgit v1.1 at 2024-12-27 19:27:58 +0000