summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/davinci_emac.c146
1 files changed, 69 insertions, 77 deletions
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index f6f81df..f5cec05 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -42,10 +42,6 @@
#include <miiphy.h>
#include <asm/arch/emac_defs.h>
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
unsigned int emac_dbg = 0;
#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
@@ -291,77 +287,6 @@ int davinci_eth_miiphy_initialize(bd_t *bis)
}
#endif
-/*
- * This function initializes the emac hardware. It does NOT initialize
- * EMAC modules power or pin multiplexors, that is done by board_init()
- * much earlier in bootup process. Returns 1 on success, 0 otherwise.
- */
-static int davinci_eth_hw_init(void)
-{
- u_int32_t phy_id;
- u_int16_t tmp;
- int i;
-
- davinci_eth_mdio_enable();
-
- for (i = 0; i < 256; i++) {
- if (adap_mdio->ALIVE)
- break;
- udelay(10);
- }
-
- if (i >= 256) {
- printf("No ETH PHY detected!!!\n");
- return(0);
- }
-
- /* Find if a PHY is connected and get it's address */
- if (!davinci_eth_phy_detect())
- return(0);
-
- /* Get PHY ID and initialize phy_ops for a detected PHY */
- if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
- active_phy_addr = 0xff;
- return(0);
- }
-
- phy_id = (tmp << 16) & 0xffff0000;
-
- if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
- active_phy_addr = 0xff;
- return(0);
- }
-
- phy_id |= tmp & 0x0000ffff;
-
- switch (phy_id) {
- case PHY_LXT972:
- sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr);
- phy.init = lxt972_init_phy;
- phy.is_phy_connected = lxt972_is_phy_connected;
- phy.get_link_speed = lxt972_get_link_speed;
- phy.auto_negotiate = lxt972_auto_negotiate;
- break;
- case PHY_DP83848:
- sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr);
- phy.init = dp83848_init_phy;
- phy.is_phy_connected = dp83848_is_phy_connected;
- phy.get_link_speed = dp83848_get_link_speed;
- phy.auto_negotiate = dp83848_auto_negotiate;
- break;
- default:
- sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr);
- phy.init = gen_init_phy;
- phy.is_phy_connected = gen_is_phy_connected;
- phy.get_link_speed = gen_get_link_speed;
- phy.auto_negotiate = gen_auto_negotiate;
- }
-
- printf("Ethernet PHY: %s\n", phy.name);
-
- return(1);
-}
-
/* Eth device open */
static int davinci_eth_open(void)
@@ -650,6 +575,73 @@ static int davinci_eth_rcv_packet (void)
return (0);
}
-#endif /* CONFIG_CMD_NET */
+/*
+ * This function initializes the emac hardware. It does NOT initialize
+ * EMAC modules power or pin multiplexors, that is done by board_init()
+ * much earlier in bootup process. Returns 1 on success, 0 otherwise.
+ */
+static int davinci_eth_hw_init(void)
+{
+ u_int32_t phy_id;
+ u_int16_t tmp;
+ int i;
+
+ davinci_eth_mdio_enable();
+
+ for (i = 0; i < 256; i++) {
+ if (adap_mdio->ALIVE)
+ break;
+ udelay(10);
+ }
+
+ if (i >= 256) {
+ printf("No ETH PHY detected!!!\n");
+ return(0);
+ }
+
+ /* Find if a PHY is connected and get it's address */
+ if (!davinci_eth_phy_detect())
+ return(0);
+
+ /* Get PHY ID and initialize phy_ops for a detected PHY */
+ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+ active_phy_addr = 0xff;
+ return(0);
+ }
-#endif /* CONFIG_DRIVER_TI_EMAC */
+ phy_id = (tmp << 16) & 0xffff0000;
+
+ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+ active_phy_addr = 0xff;
+ return(0);
+ }
+
+ phy_id |= tmp & 0x0000ffff;
+
+ switch (phy_id) {
+ case PHY_LXT972:
+ sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr);
+ phy.init = lxt972_init_phy;
+ phy.is_phy_connected = lxt972_is_phy_connected;
+ phy.get_link_speed = lxt972_get_link_speed;
+ phy.auto_negotiate = lxt972_auto_negotiate;
+ break;
+ case PHY_DP83848:
+ sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr);
+ phy.init = dp83848_init_phy;
+ phy.is_phy_connected = dp83848_is_phy_connected;
+ phy.get_link_speed = dp83848_get_link_speed;
+ phy.auto_negotiate = dp83848_auto_negotiate;
+ break;
+ default:
+ sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr);
+ phy.init = gen_init_phy;
+ phy.is_phy_connected = gen_is_phy_connected;
+ phy.get_link_speed = gen_get_link_speed;
+ phy.auto_negotiate = gen_auto_negotiate;
+ }
+
+ printf("Ethernet PHY: %s\n", phy.name);
+
+ return(1);
+}