summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Makefile2
-rwxr-xr-xdrivers/enc28j60.c983
-rw-r--r--drivers/nand/nand_base.c10
-rw-r--r--drivers/nand/nand_ecc.c228
-rw-r--r--drivers/pci_auto.c7
-rw-r--r--drivers/smc91111.c8
-rw-r--r--drivers/systemace.c6
-rw-r--r--drivers/tsec.c99
-rw-r--r--drivers/tsec.h3
9 files changed, 1197 insertions, 149 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index d68cba6..c7fcc3f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,7 +30,7 @@ LIB = $(obj)libdrivers.a
COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
- e1000.o eepro100.o \
+ e1000.o eepro100.o enc28j60.o \
i8042.o inca-ip_sw.o keyboard.o \
lan91c96.o macb.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
diff --git a/drivers/enc28j60.c b/drivers/enc28j60.c
new file mode 100755
index 0000000..98303ac
--- /dev/null
+++ b/drivers/enc28j60.c
@@ -0,0 +1,983 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#ifdef CONFIG_ENC28J60
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spi.h>
+
+/*
+ * Control Registers in Bank 0
+ */
+
+#define CTL_REG_ERDPTL 0x00
+#define CTL_REG_ERDPTH 0x01
+#define CTL_REG_EWRPTL 0x02
+#define CTL_REG_EWRPTH 0x03
+#define CTL_REG_ETXSTL 0x04
+#define CTL_REG_ETXSTH 0x05
+#define CTL_REG_ETXNDL 0x06
+#define CTL_REG_ETXNDH 0x07
+#define CTL_REG_ERXSTL 0x08
+#define CTL_REG_ERXSTH 0x09
+#define CTL_REG_ERXNDL 0x0A
+#define CTL_REG_ERXNDH 0x0B
+#define CTL_REG_ERXRDPTL 0x0C
+#define CTL_REG_ERXRDPTH 0x0D
+#define CTL_REG_ERXWRPTL 0x0E
+#define CTL_REG_ERXWRPTH 0x0F
+#define CTL_REG_EDMASTL 0x10
+#define CTL_REG_EDMASTH 0x11
+#define CTL_REG_EDMANDL 0x12
+#define CTL_REG_EDMANDH 0x13
+#define CTL_REG_EDMADSTL 0x14
+#define CTL_REG_EDMADSTH 0x15
+#define CTL_REG_EDMACSL 0x16
+#define CTL_REG_EDMACSH 0x17
+/* these are common in all banks */
+#define CTL_REG_EIE 0x1B
+#define CTL_REG_EIR 0x1C
+#define CTL_REG_ESTAT 0x1D
+#define CTL_REG_ECON2 0x1E
+#define CTL_REG_ECON1 0x1F
+
+/*
+ * Control Registers in Bank 1
+ */
+
+#define CTL_REG_EHT0 0x00
+#define CTL_REG_EHT1 0x01
+#define CTL_REG_EHT2 0x02
+#define CTL_REG_EHT3 0x03
+#define CTL_REG_EHT4 0x04
+#define CTL_REG_EHT5 0x05
+#define CTL_REG_EHT6 0x06
+#define CTL_REG_EHT7 0x07
+#define CTL_REG_EPMM0 0x08
+#define CTL_REG_EPMM1 0x09
+#define CTL_REG_EPMM2 0x0A
+#define CTL_REG_EPMM3 0x0B
+#define CTL_REG_EPMM4 0x0C
+#define CTL_REG_EPMM5 0x0D
+#define CTL_REG_EPMM6 0x0E
+#define CTL_REG_EPMM7 0x0F
+#define CTL_REG_EPMCSL 0x10
+#define CTL_REG_EPMCSH 0x11
+#define CTL_REG_EPMOL 0x14
+#define CTL_REG_EPMOH 0x15
+#define CTL_REG_EWOLIE 0x16
+#define CTL_REG_EWOLIR 0x17
+#define CTL_REG_ERXFCON 0x18
+#define CTL_REG_EPKTCNT 0x19
+
+/*
+ * Control Registers in Bank 2
+ */
+
+#define CTL_REG_MACON1 0x00
+#define CTL_REG_MACON2 0x01
+#define CTL_REG_MACON3 0x02
+#define CTL_REG_MACON4 0x03
+#define CTL_REG_MABBIPG 0x04
+#define CTL_REG_MAIPGL 0x06
+#define CTL_REG_MAIPGH 0x07
+#define CTL_REG_MACLCON1 0x08
+#define CTL_REG_MACLCON2 0x09
+#define CTL_REG_MAMXFLL 0x0A
+#define CTL_REG_MAMXFLH 0x0B
+#define CTL_REG_MAPHSUP 0x0D
+#define CTL_REG_MICON 0x11
+#define CTL_REG_MICMD 0x12
+#define CTL_REG_MIREGADR 0x14
+#define CTL_REG_MIWRL 0x16
+#define CTL_REG_MIWRH 0x17
+#define CTL_REG_MIRDL 0x18
+#define CTL_REG_MIRDH 0x19
+
+/*
+ * Control Registers in Bank 3
+ */
+
+#define CTL_REG_MAADR1 0x00
+#define CTL_REG_MAADR0 0x01
+#define CTL_REG_MAADR3 0x02
+#define CTL_REG_MAADR2 0x03
+#define CTL_REG_MAADR5 0x04
+#define CTL_REG_MAADR4 0x05
+#define CTL_REG_EBSTSD 0x06
+#define CTL_REG_EBSTCON 0x07
+#define CTL_REG_EBSTCSL 0x08
+#define CTL_REG_EBSTCSH 0x09
+#define CTL_REG_MISTAT 0x0A
+#define CTL_REG_EREVID 0x12
+#define CTL_REG_ECOCON 0x15
+#define CTL_REG_EFLOCON 0x17
+#define CTL_REG_EPAUSL 0x18
+#define CTL_REG_EPAUSH 0x19
+
+
+/*
+ * PHY Register
+ */
+
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+/* taken from the Linux driver */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHLCON 0x14
+
+/*
+ * Receive Filter Register (ERXFCON) bits
+ */
+
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/*
+ * ECON1 Register Bits
+ */
+
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/*
+ * ECON2 Register Bits
+ */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/*
+ * EIR Register Bits
+ */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/*
+ * ESTAT Register Bits
+ */
+
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/*
+ * EIE Register Bits
+ */
+
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/*
+ * MACON1 Register Bits
+ */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+
+/*
+ * MACON2 Register Bits
+ */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/*
+ * MACON3 Register Bits
+ */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/*
+ * MICMD Register Bits
+ */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/*
+ * MISTAT Register Bits
+ */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/*
+ * PHID1 and PHID2 values
+ */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+
+#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
+#define ENC_RESET 0x00020000 /* pin P1.17 */
+
+#define FAILSAFE_VALUE 5000
+
+/*
+ * Controller memory layout:
+ *
+ * 0x0000 - 0x17ff 6k bytes receive buffer
+ * 0x1800 - 0x1fff 2k bytes transmit buffer
+ */
+/* Use the lower memory for receiver buffer. See errata pt. 5 */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_TX_BUF_START 0x1800
+/* taken from the Linux driver */
+#define ENC_RX_BUF_END 0x17ff
+#define ENC_TX_BUF_END 0x1fff
+
+/* maximum frame length */
+#define ENC_MAX_FRM_LEN 1518
+
+#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
+#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
+#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
+
+
+static unsigned char encReadReg (unsigned char regNo);
+static void encWriteReg (unsigned char regNo, unsigned char data);
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
+static void encReadBuff (unsigned short length, unsigned char *pBuff);
+static void encWriteBuff (unsigned short length, unsigned char *pBuff);
+static void encBitSet (unsigned char regNo, unsigned char data);
+static void encBitClr (unsigned char regNo, unsigned char data);
+static void encReset (void);
+static void encInit (unsigned char *pEthAddr);
+static unsigned short phyRead (unsigned char addr);
+static void phyWrite(unsigned char, unsigned short);
+static void encPoll (void);
+static void encRx (void);
+
+#define m_nic_read(reg) encReadReg(reg)
+#define m_nic_write(reg, data) encWriteReg(reg, data)
+#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
+#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
+#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
+
+/* bit field set */
+#define m_nic_bfs(reg, data) encBitSet(reg, data)
+
+/* bit field clear */
+#define m_nic_bfc(reg, data) encBitClr(reg, data)
+
+static unsigned char bank = 0; /* current bank in enc28j60 */
+static unsigned char next_pointer_lsb;
+static unsigned char next_pointer_msb;
+
+static unsigned char buffer[ENC_MAX_FRM_LEN];
+static int rxResetCounter = 0;
+
+#define RX_RESET_COUNTER 1000;
+
+/*-----------------------------------------------------------------------------
+ * Always returns 0
+ */
+int eth_init (bd_t * bis)
+{
+ unsigned char estatVal;
+
+ /* configure GPIO */
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
+
+ /* CS and RESET active low */
+ PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
+ PUT32 (IO1SET, ENC_RESET);
+
+ spi_init ();
+
+ /* taken from the Linux driver - dangerous stuff here! */
+ /* Wait for CLKRDY to become set (i.e., check that we can communicate with
+ the ENC) */
+ do
+ {
+ estatVal = m_nic_read(CTL_REG_ESTAT);
+ } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
+
+ /* initialize controller */
+ encReset ();
+ encInit (bis->bi_enetaddr);
+
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+
+ return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ /* check frame length, etc. */
+ /* TODO: */
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /* set EWRPT */
+ m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
+ m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+
+ /* set ETXND */
+ m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+ m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
+ /* set ETXST */
+ m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
+ m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
+
+ /* write packet */
+ m_nic_write_data (length, (unsigned char *) packet);
+
+ /* taken from the Linux driver */
+ /* Verify that the internal transmit logic has not been altered by excessive
+ collisions. See Errata B4 12 and 14.
+ */
+ if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+
+ /* set ECON1.TXRTS */
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ * This function resets the receiver only. This function may be called from
+ * interrupt-context.
+ */
+static void encReceiverReset (void)
+{
+ unsigned char econ1;
+
+ econ1 = m_nic_read (CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ rxResetCounter = RX_RESET_COUNTER;
+ }
+}
+
+/*****************************************************************************
+ * receiver reset timer
+ */
+static void encReceiverResetCallback (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+}
+
+/*-----------------------------------------------------------------------------
+ * Check for received packets. Call NetReceive for each packet. The return
+ * value is ignored by the caller.
+ */
+int eth_rx (void)
+{
+ if (rxResetCounter > 0 && --rxResetCounter == 0) {
+ encReceiverResetCallback ();
+ }
+
+ encPoll ();
+
+ return 0;
+}
+
+void eth_halt (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+}
+
+/*****************************************************************************/
+
+static void encPoll (void)
+{
+ unsigned char eir_reg;
+ volatile unsigned char estat_reg;
+ unsigned char pkt_cnt;
+
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = m_nic_read (CTL_REG_ESTAT);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ }
+
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ }
+ encRx ();
+ /* clear PKTIF bit in EIR, this should not need to be done but it
+ seems like we get problems if we do not */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ }
+
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf ("encPoll: rx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
+ }
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf ("encPoll: tx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
+ }
+
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+static void encRx (void)
+{
+ unsigned short pkt_len;
+ unsigned short copy_len;
+ unsigned short status;
+ unsigned char eir_reg;
+ unsigned char pkt_cnt = 0;
+ unsigned short rxbuf_rdpt;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ do {
+ m_nic_read_data (6, buffer);
+ next_pointer_lsb = buffer[0];
+ next_pointer_msb = buffer[1];
+ pkt_len = buffer[2];
+ pkt_len |= (unsigned short) buffer[3] << 8;
+ status = buffer[4];
+ status |= (unsigned short) buffer[5] << 8;
+
+ if (pkt_len <= ENC_MAX_FRM_LEN)
+ copy_len = pkt_len;
+ else
+ copy_len = 0;
+
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
+ copy_len = 0;
+
+ /* taken from the Linux driver */
+ /* check if next pointer is resonable */
+ if ((((unsigned int)next_pointer_msb << 8) |
+ (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ copy_len = 0;
+
+ if (copy_len > 0) {
+ m_nic_read_data (copy_len, buffer);
+ }
+
+ /* advance read pointer to next pointer */
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ /* decrease packet counter */
+ m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+
+ /* taken from the Linux driver */
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
+ m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
+ (m_nic_read(CTL_REG_ERXNDH) << 8 |
+ m_nic_read(CTL_REG_ERXNDL)))) {
+ m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
+ m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ } else {
+ m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
+ m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ }
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1,
+ (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ if (copy_len == 0) {
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ encReceiverReset ();
+ printf ("eth_rx: copy_len=0\n");
+ continue;
+ }
+
+ NetReceive ((unsigned char *) buffer, pkt_len);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+}
+
+static void encWriteReg (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+{
+ unsigned char readback;
+ int i;
+
+ spi_lock ();
+
+ for (i = 0; i < c; i++) {
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+
+ spi_unlock (); /* we must unlock spi first */
+
+ readback = encReadReg (regNo);
+
+ spi_lock ();
+
+ if (readback == data)
+ break;
+ }
+ spi_unlock ();
+
+ if (i == c) {
+ printf ("enc28j60: write reg %d failed\n", regNo);
+ }
+}
+
+static unsigned char encReadReg (unsigned char regNo)
+{
+ unsigned char rxByte;
+
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x1f); /* read reg 0x1f */
+
+ bank = spi_read () & 0x3;
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (regNo);
+ rxByte = spi_read ();
+
+ /* check if MAC or MII register */
+ if (((bank == 2) && (regNo <= 0x1a)) ||
+ ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
+ /* ignore first byte and read another byte */
+ rxByte = spi_read ();
+ }
+
+ enc_disable ();
+ spi_unlock ();
+
+ return rxByte;
+}
+
+static void encReadBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x20 | 0x1a); /* read buffer memory */
+
+ while (length--) {
+ if (pBuff != NULL)
+ *pBuff++ = spi_read ();
+ else
+ spi_write (0);
+ }
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x60 | 0x1a); /* write buffer memory */
+
+ spi_write (0x00); /* control byte */
+
+ while (length--)
+ spi_write (*pBuff++);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitSet (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x80 | regNo); /* bit field set */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitClr (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xA0 | regNo); /* bit field clear */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encReset (void)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xff); /* soft reset */
+
+ enc_disable ();
+ spi_unlock ();
+
+ /* sleep 1 ms. See errata pt. 2 */
+ udelay (1000);
+}
+
+static void encInit (unsigned char *pEthAddr)
+{
+ unsigned short phid1 = 0;
+ unsigned short phid2 = 0;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /*
+ * Setup the buffer space. The reset values are valid for the
+ * other pointers.
+ */
+ /* We shall not write to ERXST, see errata pt. 5. Instead we
+ have to make sure that ENC_RX_BUS_START is 0. */
+ m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
+
+ /* taken from the Linux driver */
+ m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
+
+ m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+ next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
+ next_pointer_msb = (ENC_RX_BUF_START >> 8);
+
+ /* verify identification */
+ phid1 = phyRead (PHY_REG_PHID1);
+ phid2 = phyRead (PHY_REG_PHID2);
+
+ if (phid1 != ENC_PHID1_VALUE
+ || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
+ printf ("ERROR: failed to identify controller\n");
+ printf ("phid1 = %x, phid2 = %x\n",
+ phid1, (phid2 & ENC_PHID2_MASK));
+ printf ("should be phid1 = %x, phid2 = %x\n",
+ ENC_PHID1_VALUE, ENC_PHID2_VALUE);
+ }
+
+ /*
+ * --- MAC Initialization ---
+ */
+
+ /* Pull MAC out of Reset */
+
+ /* switch to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* enable MAC to receive frames */
+ /* added some bits from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
+
+ /* configure pad, tx-crc and duplex */
+ /* added a bit from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
+
+ /* added 4 new lines from the Linux driver */
+ /* Allow infinite deferals if the medium is continously busy */
+ m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+
+ /* Late collisions occur beyond 63 bytes */
+ m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+
+ /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+ m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+ * 0x0c for half-duplex. Nothing for full-duplex
+ */
+ m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+
+ /* set maximum frame length */
+ m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
+ m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+
+ /*
+ * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * and 0x15 for full duplex.
+ */
+ m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+
+ /* set MAC address */
+
+ /* switch to bank 3 */
+ m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+
+ m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
+ m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
+ m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
+ m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
+ m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
+ m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+
+ /*
+ * PHY Initialization taken from the Linux driver
+ */
+
+ /* Prevent automatic loopback of data beeing transmitted by setting
+ ENC_PHCON2_HDLDIS */
+ phyWrite(PHY_REG_PHCON2, (1<<8));
+
+ /* LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phyWrite(PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phyWrite(PHY_REG_PHCON1, 0);
+
+ /*
+ * Receive settings
+ */
+
+#ifdef CONFIG_USE_IRQ
+ /* enable interrupts */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+/*****************************************************************************
+ *
+ * Description:
+ * Read PHY registers.
+ *
+ * NOTE! This function will change to Bank 2.
+ *
+ * Params:
+ * [in] addr address of the register to read
+ *
+ * Returns:
+ * The value in the register
+ */
+static unsigned short phyRead (unsigned char addr)
+{
+ unsigned short ret = 0;
+
+ /* move to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write (CTL_REG_MIREGADR, addr);
+
+ /* set MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+
+ /* taken from the Linux driver */
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if (cnt++ >= 1000) {
+ /* GJ - this seems extremely dangerous! */
+ /* printf("#"); */
+ cnt = 0;
+ }
+ }
+
+ /* taken from the Linux driver */
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* clear MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, 0);
+
+ ret = (m_nic_read (CTL_REG_MIRDH) << 8);
+ ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+
+ return ret;
+}
+
+/*****************************************************************************
+ *
+ * Taken from the Linux driver.
+ * Description:
+ * Write PHY registers.
+ *
+ * NOTE! This function will change to Bank 3.
+ *
+ * Params:
+ * [in] addr address of the register to write to
+ * [in] data to be written
+ *
+ * Returns:
+ * None
+ */
+static void phyWrite(unsigned char addr, unsigned short data)
+{
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write(CTL_REG_MIREGADR, addr);
+
+ m_nic_write(CTL_REG_MIWRL, data & 0xff);
+ m_nic_write(CTL_REG_MIWRH, data >> 8);
+
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if(cnt++ >= 1000) {
+ cnt = 0;
+ }
+ }
+}
+
+#endif /* CONFIG_ENC28J60 */
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index 8495829..c6fee18 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -427,8 +427,9 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
struct nand_chip *this = mtd->priv;
u16 bad;
+ page = (int)(ofs >> this->page_shift) & this->pagemask;
+
if (getchip) {
- page = (int)(ofs >> this->page_shift);
chipnr = (int)(ofs >> this->chip_shift);
/* Grab the lock and see if the device is available */
@@ -436,18 +437,17 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
/* Select the NAND device */
this->select_chip(mtd, chipnr);
- } else
- page = (int) ofs;
+ }
if (this->options & NAND_BUSWIDTH_16) {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page);
bad = cpu_to_le16(this->read_word(mtd));
if (this->badblockpos & 0x1)
bad >>= 1;
if ((bad & 0xFF) != 0xff)
res = 1;
} else {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page);
if (this->read_byte(mtd) != 0xff)
res = 1;
}
diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c
index f33be96..90274e6 100644
--- a/drivers/nand/nand_ecc.c
+++ b/drivers/nand/nand_ecc.c
@@ -40,6 +40,13 @@
#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
#include<linux/mtd/mtd.h>
+
+/*
+ * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(),
+ * only nand_correct_data() is needed
+ */
+
+#ifndef CONFIG_NAND_SPL
/*
* Pre-calculated 256-way 1 byte column parity
*/
@@ -62,90 +69,75 @@ static const u_char nand_ecc_precalc_table[] = {
0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
};
-
-/**
- * nand_trans_result - [GENERIC] create non-inverted ECC
- * @reg2: line parity reg 2
- * @reg3: line parity reg 3
- * @ecc_code: ecc
- *
- * Creates non-inverted ECC code from line parity
- */
-static void nand_trans_result(u_char reg2, u_char reg3,
- u_char *ecc_code)
-{
- u_char a, b, i, tmp1, tmp2;
-
- /* Initialize variables */
- a = b = 0x80;
- tmp1 = tmp2 = 0;
-
- /* Calculate first ECC byte */
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Calculate second ECC byte */
- b = 0x80;
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Store two of the ECC bytes */
- ecc_code[0] = tmp1;
- ecc_code[1] = tmp2;
-}
-
/**
- * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block
* @mtd: MTD block structure
* @dat: raw data
* @ecc_code: buffer for ECC
*/
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
{
- u_char idx, reg1, reg2, reg3;
- int j;
+ uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
+ int i;
/* Initialize variables */
reg1 = reg2 = reg3 = 0;
- ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
/* Build up column parity */
- for(j = 0; j < 256; j++) {
-
+ for(i = 0; i < 256; i++) {
/* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[dat[j]];
+ idx = nand_ecc_precalc_table[*dat++];
reg1 ^= (idx & 0x3f);
/* All bit XOR = 1 ? */
if (idx & 0x40) {
- reg3 ^= (u_char) j;
- reg2 ^= ~((u_char) j);
+ reg3 ^= (uint8_t) i;
+ reg2 ^= ~((uint8_t) i);
}
}
/* Create non-inverted ECC code from line parity */
- nand_trans_result(reg2, reg3, ecc_code);
+ tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
+ tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
+ tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
+ tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
+ tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
+ tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
+ tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
+ tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
+
+ tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
+ tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
+ tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
+ tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
+ tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
+ tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
+ tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
+ tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
/* Calculate final ECC code */
- ecc_code[0] = ~ecc_code[0];
- ecc_code[1] = ~ecc_code[1];
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+ ecc_code[0] = ~tmp2;
+ ecc_code[1] = ~tmp1;
+#else
+ ecc_code[0] = ~tmp1;
+ ecc_code[1] = ~tmp2;
+#endif
ecc_code[2] = ((~reg1) << 2) | 0x03;
+
return 0;
}
+#endif /* CONFIG_NAND_SPL */
+
+static inline int countbits(uint32_t byte)
+{
+ int res = 0;
+
+ for (;byte; byte >>= 1)
+ res += byte & 0x01;
+ return res;
+}
/**
* nand_correct_data - [NAND Interface] Detect and correct bit error(s)
@@ -156,88 +148,52 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code
*
* Detect and correct a 1 bit error for 256 byte block
*/
-int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+int nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
{
- u_char a, b, c, d1, d2, d3, add, bit, i;
+ uint8_t s0, s1, s2;
+
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+ s0 = calc_ecc[0] ^ read_ecc[0];
+ s1 = calc_ecc[1] ^ read_ecc[1];
+ s2 = calc_ecc[2] ^ read_ecc[2];
+#else
+ s1 = calc_ecc[0] ^ read_ecc[0];
+ s0 = calc_ecc[1] ^ read_ecc[1];
+ s2 = calc_ecc[2] ^ read_ecc[2];
+#endif
+ if ((s0 | s1 | s2) == 0)
+ return 0;
- /* Do error detection */
- d1 = calc_ecc[0] ^ read_ecc[0];
- d2 = calc_ecc[1] ^ read_ecc[1];
- d3 = calc_ecc[2] ^ read_ecc[2];
+ /* Check for a single bit error */
+ if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
+ ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
+ ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
- if ((d1 | d2 | d3) == 0) {
- /* No errors */
- return 0;
- }
- else {
- a = (d1 ^ (d1 >> 1)) & 0x55;
- b = (d2 ^ (d2 >> 1)) & 0x55;
- c = (d3 ^ (d3 >> 1)) & 0x54;
-
- /* Found and will correct single bit error in the data */
- if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
- c = 0x80;
- add = 0;
- a = 0x80;
- for (i=0; i<4; i++) {
- if (d1 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- c = 0x80;
- for (i=0; i<4; i++) {
- if (d2 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- bit = 0;
- b = 0x04;
- c = 0x80;
- for (i=0; i<3; i++) {
- if (d3 & c)
- bit |= b;
- c >>= 2;
- b >>= 1;
- }
- b = 0x01;
- a = dat[add];
- a ^= (b << bit);
- dat[add] = a;
- return 1;
- } else {
- i = 0;
- while (d1) {
- if (d1 & 0x01)
- ++i;
- d1 >>= 1;
- }
- while (d2) {
- if (d2 & 0x01)
- ++i;
- d2 >>= 1;
- }
- while (d3) {
- if (d3 & 0x01)
- ++i;
- d3 >>= 1;
- }
- if (i == 1) {
- /* ECC Code Error Correction */
- read_ecc[0] = calc_ecc[0];
- read_ecc[1] = calc_ecc[1];
- read_ecc[2] = calc_ecc[2];
- return 2;
- }
- else {
- /* Uncorrectable Error */
- return -1;
- }
- }
+ uint32_t byteoffs, bitnum;
+
+ byteoffs = (s1 << 0) & 0x80;
+ byteoffs |= (s1 << 1) & 0x40;
+ byteoffs |= (s1 << 2) & 0x20;
+ byteoffs |= (s1 << 3) & 0x10;
+
+ byteoffs |= (s0 >> 4) & 0x08;
+ byteoffs |= (s0 >> 3) & 0x04;
+ byteoffs |= (s0 >> 2) & 0x02;
+ byteoffs |= (s0 >> 1) & 0x01;
+
+ bitnum = (s2 >> 5) & 0x04;
+ bitnum |= (s2 >> 4) & 0x02;
+ bitnum |= (s2 >> 3) & 0x01;
+
+ dat[byteoffs] ^= (1 << bitnum);
+
+ return 1;
}
- /* Should never happen */
+ if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
+ return 1;
+
return -1;
}
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 9691675..f170c2d 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -34,7 +34,12 @@
void pciauto_region_init(struct pci_region* res)
{
- res->bus_lower = res->bus_start;
+ /*
+ * Avoid allocating PCI resources from address 0 -- this is illegal
+ * according to PCI 2.1 and moreover, this is known to cause Linux IDE
+ * drivers to fail. Use a reasonable starting value of 0x1000 instead.
+ */
+ res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
}
void pciauto_region_align(struct pci_region *res, unsigned long size)
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index f91e4b9..8061f12 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -1538,9 +1538,9 @@ int eth_send(volatile void *packet, int length) {
int smc_get_ethaddr (bd_t * bd)
{
int env_size, rom_valid, env_present = 0, reg;
- char *s = NULL, *e, *v_mac, es[] = "11:22:33:44:55:66";
+ char *s = NULL, *e, es[] = "11:22:33:44:55:66";
char s_env_mac[64];
- uchar v_env_mac[6], v_rom_mac[6];
+ uchar v_env_mac[6], v_rom_mac[6], *v_mac;
env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
if ((env_size > 0) && (env_size < sizeof (es))) { /* exit if env is bad */
@@ -1563,7 +1563,7 @@ int smc_get_ethaddr (bd_t * bd)
if (!env_present) { /* if NO env */
if (rom_valid) { /* but ROM is valid */
- v_mac = (char *)v_rom_mac;
+ v_mac = v_rom_mac;
sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
v_mac[0], v_mac[1], v_mac[2], v_mac[3],
v_mac[4], v_mac[5]);
@@ -1573,7 +1573,7 @@ int smc_get_ethaddr (bd_t * bd)
return (-1);
}
} else { /* good env, don't care ROM */
- v_mac = (char *)v_env_mac; /* always use a good env over a ROM */
+ v_mac = v_env_mac; /* always use a good env over a ROM */
}
if (env_present && rom_valid) { /* if both env and ROM are good */
diff --git a/drivers/systemace.c b/drivers/systemace.c
index 3848d9c..7d82c27 100644
--- a/drivers/systemace.c
+++ b/drivers/systemace.c
@@ -211,10 +211,16 @@ static unsigned long systemace_read(int dev, unsigned long start,
/* Write sector count | ReadMemCardData. */
ace_writew((trans & 0xff) | 0x0300, 0x14);
+/*
+ * For FPGA configuration via SystemACE is reset unacceptable
+ * CFGDONE bit in STATUSREG is not set to 1.
+ */
+#ifndef SYSTEMACE_CONFIG_FPGA
/* Reset the configruation controller */
val = ace_readw(0x18);
val |= 0x0080;
ace_writew(val, 0x18);
+#endif
retry = trans * 16;
while (retry > 0) {
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 3f11eb0..b418773 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -5,7 +5,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
@@ -66,7 +66,11 @@ struct tsec_info_struct {
*/
static struct tsec_info_struct tsec_info[] = {
#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
+#if defined(CONFIG_MPC8544DS)
+ {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
+#else
{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
+#endif
#elif defined(CONFIG_MPC86XX_TSEC1)
{TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
#else
@@ -381,6 +385,76 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
return 0;
}
+/* Generic function which updates the speed and duplex. If
+ * autonegotiation is enabled, it uses the AND of the link
+ * partner's advertised capabilities and our advertised
+ * capabilities. If autonegotiation is disabled, we use the
+ * appropriate bits in the control register.
+ *
+ * Stolen from Linux's mii.c and phy_device.c
+ */
+uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
+{
+ /* We're using autonegotiation */
+ if (mii_reg & PHY_BMSR_AUTN_ABLE) {
+ uint lpa = 0;
+ uint gblpa = 0;
+
+ /* Check for gigabit capability */
+ if (mii_reg & PHY_BMSR_EXT) {
+ /* We want a list of states supported by
+ * both PHYs in the link
+ */
+ gblpa = read_phy_reg(priv, PHY_1000BTSR);
+ gblpa &= read_phy_reg(priv, PHY_1000BTCR) << 2;
+ }
+
+ /* Set the baseline so we only have to set them
+ * if they're different
+ */
+ priv->speed = 10;
+ priv->duplexity = 0;
+
+ /* Check the gigabit fields */
+ if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ priv->speed = 1000;
+
+ if (gblpa & PHY_1000BTSR_1000FD)
+ priv->duplexity = 1;
+
+ /* We're done! */
+ return 0;
+ }
+
+ lpa = read_phy_reg(priv, PHY_ANAR);
+ lpa &= read_phy_reg(priv, PHY_ANLPAR);
+
+ if (lpa & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) {
+ priv->speed = 100;
+
+ if (lpa & PHY_ANLPAR_TXFD)
+ priv->duplexity = 1;
+
+ } else if (lpa & PHY_ANLPAR_10FD)
+ priv->duplexity = 1;
+ } else {
+ uint bmcr = read_phy_reg(priv, PHY_BMCR);
+
+ priv->speed = 10;
+ priv->duplexity = 0;
+
+ if (bmcr & PHY_BMCR_DPLX)
+ priv->duplexity = 1;
+
+ if (bmcr & PHY_BMCR_1000_MBPS)
+ priv->speed = 1000;
+ else if (bmcr & PHY_BMCR_100_MBPS)
+ priv->speed = 100;
+ }
+
+ return 0;
+}
+
/*
* Parse the BCM54xx status register for speed and duplex information.
* The linux sungem_phy has this information, but in a table format.
@@ -718,6 +792,7 @@ static void startup_tsec(struct eth_device *dev)
/* Start up the PHY */
if(priv->phyinfo)
phy_run_commands(priv, priv->phyinfo->startup);
+
adjust_link(dev);
/* Enable Transmit and Receive */
@@ -1088,6 +1163,27 @@ struct phy_info phy_info_dm9161 = {
{miim_end,}
},
};
+/* a generic flavor. */
+struct phy_info phy_info_generic = {
+ 0,
+ "Unknown/Generic PHY",
+ 32,
+ (struct phy_cmd[]) { /* config */
+ {PHY_BMCR, PHY_BMCR_RESET, NULL},
+ {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ {PHY_BMSR, miim_read, NULL},
+ {PHY_BMSR, miim_read, &mii_parse_sr},
+ {PHY_BMSR, miim_read, &mii_parse_link},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ }
+};
+
uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
{
@@ -1203,6 +1299,7 @@ struct phy_info *phy_info[] = {
&phy_info_lxt971,
&phy_info_VSC8244,
&phy_info_dp83865,
+ &phy_info_generic,
NULL
};
diff --git a/drivers/tsec.h b/drivers/tsec.h
index 422bc66..7bf3dee 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -7,7 +7,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* maintained by Xianghua Xiao (x.xiao@motorola.com)
* author Andy Fleming
@@ -65,6 +65,7 @@
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
#define ECNTRL_R100 0x00000008
+#define ECNTRL_SGMII_MODE 0x00000002
#define miim_end -2
#define miim_read -1