diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/spi/bfin_spi.c | 343 |
2 files changed, 344 insertions, 0 deletions
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 15e0f7a..6e2c121 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libspi.a COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o +COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c new file mode 100644 index 0000000..d22862a --- /dev/null +++ b/drivers/spi/bfin_spi.c @@ -0,0 +1,343 @@ +/* + * Driver for Blackfin On-Chip SPI device + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +/*#define DEBUG*/ + +#include <common.h> +#include <malloc.h> +#include <spi.h> + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/spi.h> + +struct bfin_spi_slave { + struct spi_slave slave; + void *mmr_base; + u16 ctl, baud, flg; +}; + +#define MAKE_SPI_FUNC(mmr, off) \ +static inline void write_##mmr(struct bfin_spi_slave *bss, u16 val) { bfin_write16(bss->mmr_base + off, val); } \ +static inline u16 read_##mmr(struct bfin_spi_slave *bss) { return bfin_read16(bss->mmr_base + off); } +MAKE_SPI_FUNC(SPI_CTL, 0x00) +MAKE_SPI_FUNC(SPI_FLG, 0x04) +MAKE_SPI_FUNC(SPI_STAT, 0x08) +MAKE_SPI_FUNC(SPI_TDBR, 0x0c) +MAKE_SPI_FUNC(SPI_RDBR, 0x10) +MAKE_SPI_FUNC(SPI_BAUD, 0x14) + +#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave) + +__attribute__((weak)) +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return (cs >= 1 && cs <= 7); +} + +__attribute__((weak)) +void spi_cs_activate(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + write_SPI_FLG(bss, + (read_SPI_FLG(bss) & + ~((!bss->flg << 8) << slave->cs)) | + (1 << slave->cs)); + debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); +} + +__attribute__((weak)) +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + write_SPI_FLG(bss, read_SPI_FLG(bss) & ~(1 << slave->cs)); + debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); +} + +void spi_init() +{ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct bfin_spi_slave *bss; + u32 mmr_base; + u32 baud; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + switch (bus) { +#ifdef SPI_CTL +# define SPI0_CTL SPI_CTL +#endif + case 0: mmr_base = SPI0_CTL; break; +#ifdef SPI1_CTL + case 1: mmr_base = SPI1_CTL; break; +#endif +#ifdef SPI2_CTL + case 2: mmr_base = SPI2_CTL; break; +#endif + default: return NULL; + } + + baud = get_sclk() / (2 * max_hz); + if (baud < 2) + baud = 2; + else if (baud > (u16)-1) + baud = -1; + + bss = malloc(sizeof(*bss)); + if (!bss) + return NULL; + + bss->slave.bus = bus; + bss->slave.cs = cs; + bss->mmr_base = (void *)mmr_base; + bss->ctl = SPE | MSTR | TDBR_CORE; + if (mode & SPI_CPHA) bss->ctl |= CPHA; + if (mode & SPI_CPOL) bss->ctl |= CPOL; + if (mode & SPI_LSB_FIRST) bss->ctl |= LSBF; + bss->baud = baud; + bss->flg = mode & SPI_CS_HIGH ? 1 : 0; + + debug("%s: bus:%i cs:%i mmr:%x ctl:%x baud:%i flg:%i\n", __func__, + bus, cs, mmr_base, bss->ctl, baud, bss->flg); + + return &bss->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + free(bss); +} + +static void spi_portmux(struct spi_slave *slave) +{ +#if defined(__ADSPBF51x__) +#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func) + u16 f_mux = bfin_read_PORTF_MUX(); + u16 f_fer = bfin_read_PORTF_FER(); + u16 g_mux = bfin_read_PORTG_MUX(); + u16 g_fer = bfin_read_PORTG_FER(); + u16 h_mux = bfin_read_PORTH_MUX(); + u16 h_fer = bfin_read_PORTH_FER(); + switch (slave->bus) { + case 0: + /* set SCK/MISO/MOSI */ + SET_MUX(g, 7, 1); + g_fer |= PG12 | PG13 | PG14; + switch (slave->cs) { + case 1: SET_MUX(f, 2, 1); f_fer |= PF7; break; + case 2: /* see G above */ g_fer |= PG15; break; + case 3: SET_MUX(h, 1, 3); f_fer |= PH4; break; + case 4: /* no muxing */ break; + case 5: SET_MUX(g, 1, 3); h_fer |= PG3; break; + case 6: /* no muxing */ break; + case 7: /* no muxing */ break; + } + case 1: + /* set SCK/MISO/MOSI */ + SET_MUX(h, 0, 2); + h_fer |= PH1 | PH2 | PH3; + switch (slave->cs) { + case 1: SET_MUX(h, 2, 3); h_fer |= PH6; break; + case 2: SET_MUX(f, 0, 3); f_fer |= PF0; break; + case 3: SET_MUX(g, 0, 3); g_fer |= PG0; break; + case 4: SET_MUX(f, 3, 3); f_fer |= PF8; break; + case 5: SET_MUX(g, 6, 3); h_fer |= PG11; break; + case 6: /* no muxing */ break; + case 7: /* no muxing */ break; + } + } + bfin_write_PORTF_MUX(f_mux); + bfin_write_PORTF_FER(f_fer); + bfin_write_PORTG_MUX(g_mux); + bfin_write_PORTG_FER(g_fer); + bfin_write_PORTH_MUX(h_mux); + bfin_write_PORTH_FER(h_fer); +#elif defined(__ADSPBF52x__) +#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func) + u16 f_mux = bfin_read_PORTF_MUX(); + u16 f_fer = bfin_read_PORTF_FER(); + u16 g_mux = bfin_read_PORTG_MUX(); + u16 g_fer = bfin_read_PORTG_FER(); + u16 h_mux = bfin_read_PORTH_MUX(); + u16 h_fer = bfin_read_PORTH_FER(); + /* set SCK/MISO/MOSI */ + SET_MUX(g, 0, 3); + g_fer |= PG2 | PG3 | PG4; + switch (slave->cs) { + case 1: /* see G above */ g_fer |= PG1; break; + case 2: SET_MUX(f, 4, 3); f_fer |= PF12; break; + case 3: SET_MUX(f, 4, 3); f_fer |= PF13; break; + case 4: SET_MUX(h, 1, 1); h_fer |= PH8; break; + case 5: SET_MUX(h, 2, 1); h_fer |= PH9; break; + case 6: SET_MUX(f, 1, 3); f_fer |= PF9; break; + case 7: SET_MUX(f, 2, 3); f_fer |= PF10; break; + } + bfin_write_PORTF_MUX(f_mux); + bfin_write_PORTF_FER(f_fer); + bfin_write_PORTG_MUX(g_mux); + bfin_write_PORTG_FER(g_fer); + bfin_write_PORTH_MUX(h_mux); + bfin_write_PORTH_FER(h_fer); +#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) + u16 mux = bfin_read_PORT_MUX(); + u16 f_fer = bfin_read_PORTF_FER(); + u16 j_fer = bfin_read_PORTJ_FER(); + /* set SCK/MISO/MOSI */ + f_fer |= PF11 | PF12 | PF13; + switch (slave->cs) { + case 1: f_fer |= PF10; break; + case 2: mux |= PJSE; j_fer |= PJ11; break; + case 3: mux |= PJSE; j_fer |= PJ10; break; + case 4: mux |= PFS4E; f_fer |= PF6; break; + case 5: mux |= PFS5E; f_fer |= PF5; break; + case 6: mux |= PFS6E; f_fer |= PF4; break; + case 7: mux |= PJCE_SPI; j_fer |= PJ5; break; + } + bfin_write_PORT_MUX(mux); + bfin_write_PORTF_FER(f_fer); + bfin_write_PORTJ_FER(j_fer); +#elif defined(__ADSPBF54x__) +#define DO_MUX(port, pin) \ + mux = ((mux & ~PORT_x_MUX_##pin##_MASK) | PORT_x_MUX_##pin##_FUNC_1); \ + fer |= P##port##pin; + u32 mux; + u16 fer; + switch (slave->bus) { + case 0: + mux = bfin_read_PORTE_MUX(); + fer = bfin_read_PORTE_FER(); + /* set SCK/MISO/MOSI */ + DO_MUX(E, 0); + DO_MUX(E, 1); + DO_MUX(E, 2); + switch (slave->cs) { + case 1: DO_MUX(E, 4); break; + case 2: DO_MUX(E, 5); break; + case 3: DO_MUX(E, 6); break; + } + bfin_write_PORTE_MUX(mux); + bfin_write_PORTE_FER(fer); + break; + case 1: + mux = bfin_read_PORTG_MUX(); + fer = bfin_read_PORTG_FER(); + /* set SCK/MISO/MOSI */ + DO_MUX(G, 8); + DO_MUX(G, 9); + DO_MUX(G, 10); + switch (slave->cs) { + case 1: DO_MUX(G, 5); break; + case 2: DO_MUX(G, 6); break; + case 3: DO_MUX(G, 7); break; + } + bfin_write_PORTG_MUX(mux); + bfin_write_PORTG_FER(fer); + break; + case 2: + mux = bfin_read_PORTB_MUX(); + fer = bfin_read_PORTB_FER(); + /* set SCK/MISO/MOSI */ + DO_MUX(B, 12); + DO_MUX(B, 13); + DO_MUX(B, 14); + switch (slave->cs) { + case 1: DO_MUX(B, 9); break; + case 2: DO_MUX(B, 10); break; + case 3: DO_MUX(B, 11); break; + } + bfin_write_PORTB_MUX(mux); + bfin_write_PORTB_FER(fer); + break; + } +#endif +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + spi_portmux(slave); + write_SPI_CTL(bss, bss->ctl); + write_SPI_BAUD(bss, bss->baud); + SSYNC(); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + write_SPI_CTL(bss, 0); + SSYNC(); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + const u8 *tx = dout; + u8 *rx = din; + uint bytes = bitlen / 8; + int ret = 0; + + debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, + slave->bus, slave->cs, bitlen, bytes, flags); + + if (bitlen == 0) + goto done; + + /* we can only do 8 bit transfers */ + if (bitlen % 8) { + flags |= SPI_XFER_END; + goto done; + } + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + /* todo: take advantage of hardware fifos and setup RX dma */ + while (bytes--) { + u8 value = (tx ? *tx++ : 0); + debug("%s: tx:%x ", __func__, value); + write_SPI_TDBR(bss, value); + SSYNC(); + while ((read_SPI_STAT(bss) & TXS)) + if (ctrlc()) { + ret = -1; + goto done; + } + while (!(read_SPI_STAT(bss) & SPIF)) + if (ctrlc()) { + ret = -1; + goto done; + } + while (!(read_SPI_STAT(bss) & RXS)) + if (ctrlc()) { + ret = -1; + goto done; + } + value = read_SPI_RDBR(bss); + if (rx) + *rx++ = value; + debug("rx:%x\n", value); + } + + done: + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return ret; +} |