summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/sh_eth.c17
-rw-r--r--drivers/net/sh_eth.h85
2 files changed, 74 insertions, 28 deletions
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index d5ef29c..3657bd6 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -59,7 +59,7 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len)
}
/* packet must be a 4 byte boundary */
- if ((int)packet & (4 - 1)) {
+ if ((int)packet & 3) {
printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n", __func__);
ret = -EFAULT;
goto err;
@@ -138,7 +138,7 @@ int sh_eth_recv(struct eth_device *dev)
static int sh_eth_reset(struct sh_eth_dev *eth)
{
int port = eth->port;
-#if defined(CONFIG_CPU_SH7763)
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
int ret = 0, i;
/* Start e-dmac transmitter and receiver */
@@ -208,7 +208,7 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
/* Point the controller to the tx descriptor list. Must use physical
addresses */
outl(ADDR_TO_PHY(port_info->tx_desc_base), TDLAR(port));
-#if defined(CONFIG_CPU_SH7763)
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
outl(ADDR_TO_PHY(port_info->tx_desc_base), TDFAR(port));
outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port));
outl(0x01, TDFFR(port));/* Last discriptor bit */
@@ -276,7 +276,7 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
/* Point the controller to the rx descriptor list */
outl(ADDR_TO_PHY(port_info->rx_desc_base), RDLAR(port));
-#if defined(CONFIG_CPU_SH7763)
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
outl(ADDR_TO_PHY(port_info->rx_desc_base), RDFAR(port));
outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port));
outl(RDFFR_RDLF, RDFFR(port));
@@ -346,7 +346,8 @@ static int sh_eth_phy_config(struct sh_eth_dev *eth)
struct eth_device *dev = port_info->dev;
struct phy_device *phydev;
- phydev = phy_connect(miiphy_get_dev_by_name(dev->name),
+ phydev = phy_connect(
+ miiphy_get_dev_by_name(dev->name),
port_info->phy_addr, dev, PHY_INTERFACE_MODE_MII);
port_info->phydev = phydev;
phy_config(phydev);
@@ -398,7 +399,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(APR_AP, APR(port));
outl(MPR_MP, MPR(port));
#endif
-#if defined(CONFIG_CPU_SH7763)
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
outl(TPAUSER_TPAUSE, TPAUSER(port));
#elif defined(CONFIG_CPU_SH7757)
outl(TPAUSER_UNLIMITED, TPAUSER(port));
@@ -418,7 +419,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
/* Set the transfer speed */
if (phy->speed == 100) {
printf(SHETHER_NAME ": 100Base/");
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
outl(GECMR_100B, GECMR(port));
#elif defined(CONFIG_CPU_SH7757)
outl(1, RTRATE(port));
@@ -427,7 +428,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
#endif
} else if (phy->speed == 10) {
printf(SHETHER_NAME ": 10Base/");
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
outl(GECMR_10B, GECMR(port));
#elif defined(CONFIG_CPU_SH7757)
outl(0, RTRATE(port));
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 27fde05..475a9e1 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -188,13 +188,51 @@ struct sh_eth_dev {
#define TPAUSER(port) (BASE_IO_ADDR + 0x0164)
#define MAHR(port) (BASE_IO_ADDR + 0x01c0)
#define MALR(port) (BASE_IO_ADDR + 0x01c8)
+
+#elif defined(CONFIG_CPU_SH7734)
+#define BASE_IO_ADDR 0xFEE00000
+
+#define EDSR(port) (BASE_IO_ADDR)
+
+#define TDLAR(port) (BASE_IO_ADDR + 0x0010)
+#define TDFAR(port) (BASE_IO_ADDR + 0x0014)
+#define TDFXR(port) (BASE_IO_ADDR + 0x0018)
+#define TDFFR(port) (BASE_IO_ADDR + 0x001c)
+#define RDLAR(port) (BASE_IO_ADDR + 0x0030)
+#define RDFAR(port) (BASE_IO_ADDR + 0x0034)
+#define RDFXR(port) (BASE_IO_ADDR + 0x0038)
+#define RDFFR(port) (BASE_IO_ADDR + 0x003c)
+
+#define EDMR(port) (BASE_IO_ADDR + 0x0400)
+#define EDTRR(port) (BASE_IO_ADDR + 0x0408)
+#define EDRRR(port) (BASE_IO_ADDR + 0x0410)
+#define EESR(port) (BASE_IO_ADDR + 0x0428)
+#define EESIPR(port) (BASE_IO_ADDR + 0x0430)
+#define TRSCER(port) (BASE_IO_ADDR + 0x0438)
+#define TFTR(port) (BASE_IO_ADDR + 0x0448)
+#define FDR(port) (BASE_IO_ADDR + 0x0450)
+#define RMCR(port) (BASE_IO_ADDR + 0x0458)
+#define RPADIR(port) (BASE_IO_ADDR + 0x0460)
+#define FCFTR(port) (BASE_IO_ADDR + 0x0468)
+#define ECMR(port) (BASE_IO_ADDR + 0x0500)
+#define RFLR(port) (BASE_IO_ADDR + 0x0508)
+#define ECSIPR(port) (BASE_IO_ADDR + 0x0518)
+#define PIR(port) (BASE_IO_ADDR + 0x0520)
+#define PIPR(port) (BASE_IO_ADDR + 0x052c)
+#define APR(port) (BASE_IO_ADDR + 0x0554)
+#define MPR(port) (BASE_IO_ADDR + 0x0558)
+#define TPAUSER(port) (BASE_IO_ADDR + 0x0564)
+#define GECMR(port) (BASE_IO_ADDR + 0x05b0)
+#define MAHR(port) (BASE_IO_ADDR + 0x05C0)
+#define MALR(port) (BASE_IO_ADDR + 0x05C8)
+
#endif
/*
* Register's bits
* Copy from Linux driver source code
*/
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
/* EDSR */
enum EDSR_BIT {
EDSR_ENT = 0x01, EDSR_ENR = 0x02,
@@ -205,11 +243,11 @@ enum EDSR_BIT {
/* EDMR */
enum DMAC_M_BIT {
EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
-#ifdef CONFIG_CPU_SH7763
- EDMR_SRST = 0x03,
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
+ EDMR_SRST = 0x03, /* Receive/Send reset */
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
-#elif defined(CONFIG_CPU_SH7757) ||defined (CONFIG_CPU_SH7724)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7724)
EDMR_SRST = 0x01,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
@@ -223,7 +261,7 @@ enum DMAC_M_BIT {
/* EDTRR */
enum DMAC_T_BIT {
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
EDTRR_TRNS = 0x03,
#else
EDTRR_TRNS = 0x01,
@@ -262,7 +300,8 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
/* EESR */
enum EESR_BIT {
-#ifndef CONFIG_CPU_SH7763
+
+#if defined(CONFIG_CPU_SH7724) || defined(CONFIG_CPU_SH7757)
EESR_TWB = 0x40000000,
#else
EESR_TWB = 0xC0000000,
@@ -272,14 +311,14 @@ enum EESR_BIT {
#endif
EESR_TABT = 0x04000000,
EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
-#ifndef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7724) || defined(CONFIG_CPU_SH7757)
EESR_ADE = 0x00800000,
#endif
EESR_ECI = 0x00400000,
EESR_FTC = 0x00200000, EESR_TDE = 0x00100000,
EESR_TFE = 0x00080000, EESR_FRC = 0x00040000,
EESR_RDE = 0x00020000, EESR_RFE = 0x00010000,
-#ifndef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7724) && !defined(CONFIG_CPU_SH7757)
EESR_CND = 0x00000800,
#endif
EESR_DLC = 0x00000400,
@@ -291,7 +330,7 @@ enum EESR_BIT {
};
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
# define TX_CHECK (EESR_TC1 | EESR_FTC)
# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
| EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
@@ -352,7 +391,7 @@ enum FCFTR_BIT {
/* Transfer descriptor bit */
enum TD_STS_BIT {
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7757) \
- || defined(CONFIG_CPU_SH7724)
+ || defined(CONFIG_CPU_SH7724) || defined(CONFIG_CPU_SH7734)
TD_TACT = 0x80000000,
#else
TD_TACT = 0x7fffffff,
@@ -368,7 +407,7 @@ enum TD_STS_BIT {
enum RECV_RST_BIT { RMCR_RST = 0x01, };
/* ECMR */
enum FELIC_MODE_BIT {
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
ECMR_TRCCM=0x04000000, ECMR_RCSC= 0x00800000, ECMR_DPAD= 0x00200000,
ECMR_RZPF = 0x00100000,
#endif
@@ -383,7 +422,7 @@ enum FELIC_MODE_BIT {
};
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | ECMR_RXF | \
ECMR_TXF | ECMR_MCT)
#elif CONFIG_CPU_SH7757
@@ -396,14 +435,14 @@ enum FELIC_MODE_BIT {
/* ECSR */
enum ECSR_STATUS_BIT {
-#ifndef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7724) || defined(CONFIG_CPU_SH7757)
ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
#endif
ECSR_LCHNG = 0x04,
ECSR_MPD = 0x02, ECSR_ICD = 0x01,
};
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
#else
# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
@@ -412,14 +451,20 @@ enum ECSR_STATUS_BIT {
/* ECSIPR */
enum ECSIPR_STATUS_MASK_BIT {
-#ifndef CONFIG_CPU_SH7763
- ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
-#endif
+#if defined(CONFIG_CPU_SH7724)
+ ECSIPR_PSRTOIP = 0x10,
+ ECSIPR_LCHNGIP = 0x04,
+ ECSIPR_ICDIP = 0x01,
+#elif defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
+ ECSIPR_PSRTOIP = 0x10,
+ ECSIPR_PHYIP = 0x08,
ECSIPR_LCHNGIP = 0x04,
- ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
+ ECSIPR_MPDIP = 0x02,
+ ECSIPR_ICDIP = 0x01,
+#endif
};
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
#else
# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
@@ -458,7 +503,7 @@ enum RPADIR_BIT {
RPADIR_PADR = 0x0003f,
};
-#ifdef CONFIG_CPU_SH7763
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
# define RPADIR_INIT (0x00)
#else
# define RPADIR_INIT (RPADIR_PADS1)