diff options
Diffstat (limited to 'drivers')
-rw-r--r--[-rwxr-xr-x] | drivers/at45.c | 316 | ||||
-rw-r--r-- | drivers/onenand/Makefile | 44 | ||||
-rw-r--r-- | drivers/onenand/onenand_base.c | 1294 | ||||
-rw-r--r-- | drivers/onenand/onenand_bbt.c | 265 | ||||
-rw-r--r-- | drivers/usb_ohci.c | 1 |
5 files changed, 1760 insertions, 160 deletions
diff --git a/drivers/at45.c b/drivers/at45.c index 507ff36..dac987a 100755..100644 --- a/drivers/at45.c +++ b/drivers/at45.c @@ -27,33 +27,31 @@ /* * spi.c API */ -extern unsigned int AT91F_SpiWrite (AT91PS_DataflashDesc pDesc); -extern void AT91F_SpiEnable(int cs); +extern unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc); +extern void AT91F_SpiEnable(int cs); #define AT91C_TIMEOUT_WRDY 200000 - /*----------------------------------------------------------------------*/ /* \fn AT91F_DataFlashSendCommand */ /* \brief Generic function to send a command to the dataflash */ /*----------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashSendCommand( - AT91PS_DataFlash pDataFlash, - unsigned char OpCode, - unsigned int CmdSize, - unsigned int DataflashAddress) +AT91S_DataFlashStatus AT91F_DataFlashSendCommand(AT91PS_DataFlash pDataFlash, + unsigned char OpCode, + unsigned int CmdSize, + unsigned int DataflashAddress) { unsigned int adr; - if ( (pDataFlash->pDataFlashDesc->state) != IDLE) + if ((pDataFlash->pDataFlashDesc->state) != IDLE) return DATAFLASH_BUSY; /* process the address to obtain page address and byte address */ adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << - pDataFlash->pDevice->page_offset) + (DataflashAddress % - (pDataFlash->pDevice->pages_size)); + pDataFlash->pDevice->page_offset) + + (DataflashAddress % (pDataFlash->pDevice->pages_size)); - /* fill the command buffer */ + /* fill the command buffer */ pDataFlash->pDataFlashDesc->command[0] = OpCode; if (pDataFlash->pDevice->pages_number >= 16384) { pDataFlash->pDataFlashDesc->command[1] = @@ -78,16 +76,16 @@ AT91S_DataFlashStatus AT91F_DataFlashSendCommand( pDataFlash->pDataFlashDesc->command[7] = 0; /* Initialize the SpiData structure for the spi write fuction */ - pDataFlash->pDataFlashDesc->tx_cmd_pt = + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command; - pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize; - pDataFlash->pDataFlashDesc->rx_cmd_pt = + pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize; + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command; - pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize; + pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize; /* send the command and read the data */ - return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); } - + return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); +} /*----------------------------------------------------------------------*/ /* \fn AT91F_DataFlashGetStatus */ @@ -98,50 +96,49 @@ AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) AT91S_DataFlashStatus status; /* if a transfert is in progress ==> return 0 */ - if( (pDesc->state) != IDLE) + if ((pDesc->state) != IDLE) return DATAFLASH_BUSY; /* first send the read status command (D7H) */ pDesc->command[0] = DB_STATUS; pDesc->command[1] = 0; - pDesc->DataFlash_state = GET_STATUS; - pDesc->tx_data_size = 0; /* Transmit the command */ - /* and receive response */ - pDesc->tx_cmd_pt = pDesc->command; - pDesc->rx_cmd_pt = pDesc->command; - pDesc->rx_cmd_size = 2; - pDesc->tx_cmd_size = 2; - status = AT91F_SpiWrite (pDesc); + pDesc->DataFlash_state = GET_STATUS; + pDesc->tx_data_size = 0; /* Transmit the command */ + /* and receive response */ + pDesc->tx_cmd_pt = pDesc->command; + pDesc->rx_cmd_pt = pDesc->command; + pDesc->rx_cmd_size = 2; + pDesc->tx_cmd_size = 2; + status = AT91F_SpiWrite(pDesc); - pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); + pDesc->DataFlash_state = *((unsigned char *)(pDesc->rx_cmd_pt) + 1); return status; } - /*----------------------------------------------------------------------*/ /* \fn AT91F_DataFlashWaitReady */ /* \brief wait for dataflash ready (bit7 of the status register == 1) */ /*----------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc -pDataFlashDesc, unsigned int timeout) + pDataFlashDesc, + unsigned int timeout) { pDataFlashDesc->DataFlash_state = IDLE; do { AT91F_DataFlashGetStatus(pDataFlashDesc); timeout--; - } while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && - (timeout > 0) ); + } while (((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && + (timeout > 0)); - if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) + if ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) return DATAFLASH_ERROR; return DATAFLASH_OK; } - /*--------------------------------------------------------------------------*/ /* Function Name : AT91F_DataFlashContinuousRead */ /* Object : Continuous stream Read */ @@ -151,17 +148,17 @@ pDataFlashDesc, unsigned int timeout) /* : <sizeToRead> = data buffer size */ /* Return value : State of the dataflash */ /*--------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( - AT91PS_DataFlash pDataFlash, - int src, - unsigned char *dataBuffer, - int sizeToRead ) +AT91S_DataFlashStatus AT91F_DataFlashContinuousRead( + AT91PS_DataFlash pDataFlash, + int src, + unsigned char *dataBuffer, + int sizeToRead) { AT91S_DataFlashStatus status; /* Test the size to read in the device */ - if ( (src + sizeToRead) > - (pDataFlash->pDevice->pages_size * - (pDataFlash->pDevice->pages_number))) + if ((src + sizeToRead) > + (pDataFlash->pDevice->pages_size * + (pDataFlash->pDevice->pages_number))) return DATAFLASH_MEMORY_OVERFLOW; pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; @@ -169,13 +166,12 @@ AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; - status = AT91F_DataFlashSendCommand - (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); + status = AT91F_DataFlashSendCommand( + pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); /* Send the command to the dataflash */ - return(status); + return (status); } - /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_DataFlashPagePgmBuf */ /* Object : Main memory page program thru buffer 1 or buffer 2 */ @@ -185,11 +181,10 @@ AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( /* : <SizeToWrite> = data buffer size */ /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int SizeToWrite) +AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int SizeToWrite) { int cmdsize; pDataFlash->pDataFlashDesc->tx_data_pt = src; @@ -201,9 +196,9 @@ AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( /* Send the command to the dataflash */ if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, -cmdsize, dest)); } - + return (AT91F_DataFlashSendCommand( + pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest)); +} /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_MainMemoryToBufferTransfert */ @@ -214,26 +209,29 @@ cmdsize, dest)); } /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int page) + AT91PS_DataFlash + pDataFlash, + unsigned char + BufferCommand, + unsigned int page) { int cmdsize; /* Test if the buffer command is legal */ - if ((BufferCommand != DB_PAGE_2_BUF1_TRF) - && (BufferCommand != DB_PAGE_2_BUF2_TRF)) + if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && + (BufferCommand != DB_PAGE_2_BUF2_TRF)) { return DATAFLASH_BAD_COMMAND; + } /* no data to transmit or receive */ pDataFlash->pDataFlashDesc->tx_data_size = 0; cmdsize = 4; if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, -page*pDataFlash->pDevice->pages_size)); + return (AT91F_DataFlashSendCommand( + pDataFlash, BufferCommand, cmdsize, + page * pDataFlash->pDevice->pages_size)); } - /*-------------------------------------------------------------------------- */ /* Function Name : AT91F_DataFlashWriteBuffer */ /* Object : Write data to the internal sram buffer 1 or 2 */ @@ -244,58 +242,61 @@ page*pDataFlash->pDevice->pages_size)); /* : <SizeToWrite> = data buffer size */ /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned char *dataBuffer, - unsigned int bufferAddress, - int SizeToWrite ) +AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned char *dataBuffer, + unsigned int bufferAddress, + int SizeToWrite) { int cmdsize; /* Test if the buffer command is legal */ - if ((BufferCommand != DB_BUF1_WRITE) - && (BufferCommand != DB_BUF2_WRITE)) + if ((BufferCommand != DB_BUF1_WRITE) && + (BufferCommand != DB_BUF2_WRITE)) { return DATAFLASH_BAD_COMMAND; + } /* buffer address must be lower than page size */ if (bufferAddress > pDataFlash->pDevice->pages_size) return DATAFLASH_BAD_ADDRESS; - if ( (pDataFlash->pDataFlashDesc->state) != IDLE) + if ((pDataFlash->pDataFlashDesc->state) != IDLE) return DATAFLASH_BUSY; /* Send first Write Command */ pDataFlash->pDataFlashDesc->command[0] = BufferCommand; pDataFlash->pDataFlashDesc->command[1] = 0; if (pDataFlash->pDevice->pages_number >= 16384) { - pDataFlash->pDataFlashDesc->command[2] = 0; - pDataFlash->pDataFlashDesc->command[3] = + pDataFlash->pDataFlashDesc->command[2] = 0; + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & - pDataFlash->pDevice->byte_mask)) >> 8); - pDataFlash->pDataFlashDesc->command[4] = - (unsigned char)((unsigned int)bufferAddress & 0x00FF); + pDataFlash->pDevice-> + byte_mask)) >> 8); + pDataFlash->pDataFlashDesc->command[4] = + (unsigned char)((unsigned int)bufferAddress & 0x00FF); cmdsize = 5; } else { - pDataFlash->pDataFlashDesc->command[2] = + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & - pDataFlash->pDevice->byte_mask)) >> 8); - pDataFlash->pDataFlashDesc->command[3] = - (unsigned char)((unsigned int)bufferAddress & 0x00FF); - pDataFlash->pDataFlashDesc->command[4] = 0; + pDataFlash->pDevice-> + byte_mask)) >> 8); + pDataFlash->pDataFlashDesc->command[3] = + (unsigned char)((unsigned int)bufferAddress & 0x00FF); + pDataFlash->pDataFlashDesc->command[4] = 0; cmdsize = 4; } - pDataFlash->pDataFlashDesc->tx_cmd_pt = + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command; pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize; - pDataFlash->pDataFlashDesc->rx_cmd_pt = + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command; pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize; - pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; - pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite; + pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; + pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite; return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); } @@ -309,22 +310,22 @@ AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_PageErase( - AT91PS_DataFlash pDataFlash, - unsigned int page) + AT91PS_DataFlash pDataFlash, + unsigned int page) { int cmdsize; /* Test if the buffer command is legal */ /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; + pDataFlash->pDataFlashDesc->tx_data_size = 0; cmdsize = 4; if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, -page*pDataFlash->pDevice->pages_size)); + return (AT91F_DataFlashSendCommand(pDataFlash, + DB_PAGE_ERASE, cmdsize, + page * pDataFlash->pDevice->pages_size)); } - /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_BlockErase */ /* Object : Erase a Block */ @@ -334,18 +335,19 @@ page*pDataFlash->pDevice->pages_size)); /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ AT91S_DataFlashStatus AT91F_BlockErase( - AT91PS_DataFlash pDataFlash, - unsigned int block) + AT91PS_DataFlash pDataFlash, + unsigned int block) { int cmdsize; /* Test if the buffer command is legal */ /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; + pDataFlash->pDataFlashDesc->tx_data_size = 0; cmdsize = 4; if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; - return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, -block*8*pDataFlash->pDevice->pages_size)); + return (AT91F_DataFlashSendCommand(pDataFlash, DB_BLOCK_ERASE, cmdsize, + block * 8 * + pDataFlash->pDevice->pages_size)); } /*---------------------------------------------------------------------------*/ @@ -356,17 +358,16 @@ block*8*pDataFlash->pDevice->pages_size)); /* : <dest> = main memory address */ /* Return value : State of the dataflash */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_WriteBufferToMain ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int dest ) +AT91S_DataFlashStatus AT91F_WriteBufferToMain(AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned int dest) { int cmdsize; /* Test if the buffer command is correct */ if ((BufferCommand != DB_BUF1_PAGE_PGM) && - (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && - (BufferCommand != DB_BUF2_PAGE_PGM) && - (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) + (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && + (BufferCommand != DB_BUF2_PAGE_PGM) && + (BufferCommand != DB_BUF2_PAGE_ERASE_PGM)) return DATAFLASH_BAD_COMMAND; /* no data to transmit or receive */ @@ -376,9 +377,9 @@ AT91S_DataFlashStatus AT91F_WriteBufferToMain ( if (pDataFlash->pDevice->pages_number >= 16384) cmdsize = 5; /* Send the command to the dataflash */ - return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, - dest)); } - + return (AT91F_DataFlashSendCommand(pDataFlash, BufferCommand, + cmdsize, dest)); +} /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_PartialPageWrite */ @@ -387,11 +388,10 @@ AT91S_DataFlashStatus AT91F_WriteBufferToMain ( /* : <AdrInpage> = adr to begin the fading */ /* : <length> = Number of bytes to erase */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_PartialPageWrite ( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int size) +AT91S_DataFlashStatus AT91F_PartialPageWrite(AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int size) { unsigned int page; unsigned int AdrInPage; @@ -400,10 +400,9 @@ AT91S_DataFlashStatus AT91F_PartialPageWrite ( AdrInPage = dest % (pDataFlash->pDevice->pages_size); /* Read the contents of the page in the Sram Buffer */ - AT91F_MainMemoryToBufferTransfert(pDataFlash, - DB_PAGE_2_BUF1_TRF, page); + AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page); AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); /*Update the SRAM buffer */ AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); @@ -416,12 +415,13 @@ AT91S_DataFlashStatus AT91F_PartialPageWrite ( AT91F_PageErase(pDataFlash, page); /* Rewrite the modified Sram Buffer in the main memory */ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); } /* Rewrite the modified Sram Buffer in the main memory */ - return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, - (page*pDataFlash->pDevice->pages_size))); + return (AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, + (page * + pDataFlash->pDevice->pages_size))); } /*---------------------------------------------------------------------------*/ @@ -431,11 +431,9 @@ AT91S_DataFlashStatus AT91F_PartialPageWrite ( /* : <dest> = dataflash adress */ /* : <size> = data buffer size */ /*---------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashWrite( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ) +AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash pDataFlash, + unsigned char *src, + int dest, int size) { unsigned int length; unsigned int page; @@ -443,26 +441,24 @@ AT91S_DataFlashStatus AT91F_DataFlashWrite( AT91F_SpiEnable(pDataFlash->pDevice->cs); - if ( (dest + size) > (pDataFlash->pDevice->pages_size * - (pDataFlash->pDevice->pages_number))) + if ((dest + size) > (pDataFlash->pDevice->pages_size * + (pDataFlash->pDevice->pages_number))) return DATAFLASH_MEMORY_OVERFLOW; /* If destination does not fit a page start address */ - if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) - { - length = pDataFlash->pDevice->pages_size - - (dest % - ((unsigned int) - (pDataFlash->pDevice->pages_size))); + if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0) { + length = + pDataFlash->pDevice->pages_size - + (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); if (size < length) length = size; - if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) + if (!AT91F_PartialPageWrite(pDataFlash, src, dest, length)) return DATAFLASH_ERROR; AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); /* Update size, source and destination pointers */ size -= length; @@ -470,78 +466,77 @@ AT91S_DataFlashStatus AT91F_DataFlashWrite( src += length; } - while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) { + while ((size - pDataFlash->pDevice->pages_size) >= 0) { /* program dataflash page */ page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); status = AT91F_DataFlashWriteBuffer(pDataFlash, - DB_BUF1_WRITE, src, 0, - pDataFlash->pDevice->pages_size); + DB_BUF1_WRITE, src, 0, + pDataFlash->pDevice-> + pages_size); AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); status = AT91F_PageErase(pDataFlash, page); AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); if (!status) return DATAFLASH_ERROR; - status = AT91F_WriteBufferToMain (pDataFlash, - DB_BUF1_PAGE_PGM, dest); - if(!status) + status = AT91F_WriteBufferToMain(pDataFlash, + DB_BUF1_PAGE_PGM, dest); + if (!status) return DATAFLASH_ERROR; AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); /* Update size, source and destination pointers */ size -= pDataFlash->pDevice->pages_size; dest += pDataFlash->pDevice->pages_size; - src += pDataFlash->pDevice->pages_size; + src += pDataFlash->pDevice->pages_size; } /* If still some bytes to read */ - if ( size > 0 ) { + if (size > 0) { /* program dataflash page */ - if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) + if (!AT91F_PartialPageWrite(pDataFlash, src, dest, size)) return DATAFLASH_ERROR; AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY); + AT91C_TIMEOUT_WRDY); } return DATAFLASH_OK; } - /*---------------------------------------------------------------------------*/ /* Function Name : AT91F_DataFlashRead */ /* Object : Read a block in dataflash */ /* Input Parameters : */ /* Return value : */ /*---------------------------------------------------------------------------*/ -int AT91F_DataFlashRead( - AT91PS_DataFlash pDataFlash, - unsigned long addr, - unsigned long size, - char *buffer) +int AT91F_DataFlashRead(AT91PS_DataFlash pDataFlash, + unsigned long addr, unsigned long size, char *buffer) { unsigned long SizeToRead; AT91F_SpiEnable(pDataFlash->pDevice->cs); - if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, + if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) return -1; while (size) { - SizeToRead = (size < 0x8000)? size:0x8000; + SizeToRead = (size < 0x8000) ? size : 0x8000; if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, - AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) + AT91C_TIMEOUT_WRDY) != + DATAFLASH_OK) return -1; - if (AT91F_DataFlashContinuousRead (pDataFlash, addr, - (uchar *) buffer, SizeToRead) != DATAFLASH_OK) + if (AT91F_DataFlashContinuousRead(pDataFlash, addr, + (uchar *) buffer, + SizeToRead) != DATAFLASH_OK) return -1; size -= SizeToRead; @@ -558,9 +553,10 @@ int AT91F_DataFlashRead( /* Input Parameters : */ /* Return value : Dataflash status register */ /*---------------------------------------------------------------------------*/ -int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) { +int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) +{ AT91F_SpiEnable(cs); AT91F_DataFlashGetStatus(pDesc); - return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C); + return ((pDesc->command[1] == 0xFF) ? 0 : pDesc->command[1] & 0x3C); } #endif diff --git a/drivers/onenand/Makefile b/drivers/onenand/Makefile new file mode 100644 index 0000000..2049413 --- /dev/null +++ b/drivers/onenand/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2005-2007 Samsung Electronics. +# Kyungmin Park <kyungmin.park@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libonenand.a + +COBJS := onenand_base.o onenand_bbt.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/onenand/onenand_base.c b/drivers/onenand/onenand_base.c new file mode 100644 index 0000000..7983a4a --- /dev/null +++ b/drivers/onenand/onenand_base.c @@ -0,0 +1,1294 @@ +/* + * linux/drivers/mtd/onenand/onenand_base.c + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> + +#ifdef CONFIG_CMD_ONENAND + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <asm/io.h> +#include <asm/errno.h> + +static const unsigned char ffchars[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ +}; + +/** + * onenand_readw - [OneNAND Interface] Read OneNAND register + * @param addr address to read + * + * Read OneNAND register + */ +static unsigned short onenand_readw(void __iomem * addr) +{ + return readw(addr); +} + +/** + * onenand_writew - [OneNAND Interface] Write OneNAND register with value + * @param value value to write + * @param addr address to write + * + * Write OneNAND register with value + */ +static void onenand_writew(unsigned short value, void __iomem * addr) +{ + writew(value, addr); +} + +/** + * onenand_block_address - [DEFAULT] Get block address + * @param device the device id + * @param block the block + * @return translated block address if DDP, otherwise same + * + * Setup Start Address 1 Register (F100h) + */ +static int onenand_block_address(int device, int block) +{ + if (device & ONENAND_DEVICE_IS_DDP) { + /* Device Flash Core select, NAND Flash Block Address */ + int dfs = 0, density, mask; + + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + mask = (1 << (density + 6)); + + if (block & mask) + dfs = 1; + + return (dfs << ONENAND_DDP_SHIFT) | (block & (mask - 1)); + } + + return block; +} + +/** + * onenand_bufferram_address - [DEFAULT] Get bufferram address + * @param device the device id + * @param block the block + * @return set DBS value if DDP, otherwise 0 + * + * Setup Start Address 2 Register (F101h) for DDP + */ +static int onenand_bufferram_address(int device, int block) +{ + if (device & ONENAND_DEVICE_IS_DDP) { + /* Device BufferRAM Select */ + int dbs = 0, density, mask; + + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + mask = (1 << (density + 6)); + + if (block & mask) + dbs = 1; + + return (dbs << ONENAND_DDP_SHIFT); + } + + return 0; +} + +/** + * onenand_page_address - [DEFAULT] Get page address + * @param page the page address + * @param sector the sector address + * @return combined page and sector address + * + * Setup Start Address 8 Register (F107h) + */ +static int onenand_page_address(int page, int sector) +{ + /* Flash Page Address, Flash Sector Address */ + int fpa, fsa; + + fpa = page & ONENAND_FPA_MASK; + fsa = sector & ONENAND_FSA_MASK; + + return ((fpa << ONENAND_FPA_SHIFT) | fsa); +} + +/** + * onenand_buffer_address - [DEFAULT] Get buffer address + * @param dataram1 DataRAM index + * @param sectors the sector address + * @param count the number of sectors + * @return the start buffer value + * + * Setup Start Buffer Register (F200h) + */ +static int onenand_buffer_address(int dataram1, int sectors, int count) +{ + int bsa, bsc; + + /* BufferRAM Sector Address */ + bsa = sectors & ONENAND_BSA_MASK; + + if (dataram1) + bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */ + else + bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */ + + /* BufferRAM Sector Count */ + bsc = count & ONENAND_BSC_MASK; + + return ((bsa << ONENAND_BSA_SHIFT) | bsc); +} + +/** + * onenand_command - [DEFAULT] Send command to OneNAND device + * @param mtd MTD device structure + * @param cmd the command to be sent + * @param addr offset to read from or write to + * @param len number of bytes to read or write + * + * Send command to OneNAND device. This function is used for middle/large page + * devices (1KB/2KB Bytes per page) + */ +static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, + size_t len) +{ + struct onenand_chip *this = mtd->priv; + int value, readcmd = 0; + int block, page; + /* Now we use page size operation */ + int sectors = 4, count = 4; + + /* Address translation */ + switch (cmd) { + case ONENAND_CMD_UNLOCK: + case ONENAND_CMD_LOCK: + case ONENAND_CMD_LOCK_TIGHT: + block = -1; + page = -1; + break; + + case ONENAND_CMD_ERASE: + case ONENAND_CMD_BUFFERRAM: + block = (int)(addr >> this->erase_shift); + page = -1; + break; + + default: + block = (int)(addr >> this->erase_shift); + page = (int)(addr >> this->page_shift); + page &= this->page_mask; + break; + } + + /* NOTE: The setting order of the registers is very important! */ + if (cmd == ONENAND_CMD_BUFFERRAM) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this->device_id, block); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS2); + + /* Switch to the next data buffer */ + ONENAND_SET_NEXT_BUFFERRAM(this); + + return 0; + } + + if (block != -1) { + /* Write 'DFS, FBA' of Flash */ + value = onenand_block_address(this->device_id, block); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS1); + } + + if (page != -1) { + int dataram; + + switch (cmd) { + case ONENAND_CMD_READ: + case ONENAND_CMD_READOOB: + dataram = ONENAND_SET_NEXT_BUFFERRAM(this); + readcmd = 1; + break; + + default: + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } + + /* Write 'FPA, FSA' of Flash */ + value = onenand_page_address(page, sectors); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS8); + + /* Write 'BSA, BSC' of DataRAM */ + value = onenand_buffer_address(dataram, sectors, count); + this->write_word(value, this->base + ONENAND_REG_START_BUFFER); + + if (readcmd) { + /* Select DataRAM for DDP */ + value = + onenand_bufferram_address(this->device_id, block); + this->write_word(value, + this->base + + ONENAND_REG_START_ADDRESS2); + } + } + + /* Interrupt clear */ + this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); + /* Write command */ + this->write_word(cmd, this->base + ONENAND_REG_COMMAND); + + return 0; +} + +/** + * onenand_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. This applies to all OneNAND command + * Read can take up to 30us, erase up to 2ms and program up to 350us + * according to general OneNAND specs + */ +static int onenand_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip *this = mtd->priv; + unsigned int flags = ONENAND_INT_MASTER; + unsigned int interrupt = 0; + unsigned int ctrl, ecc; + + while (1) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + if (interrupt & flags) + break; + } + + ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + + if (ctrl & ONENAND_CTRL_ERROR) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_wait: controller error = 0x%04x\n", ctrl); + return -EAGAIN; + } + + if (ctrl & ONENAND_CTRL_LOCK) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_wait: it's locked error = 0x%04x\n", ctrl); + return -EIO; + } + + if (interrupt & ONENAND_INT_READ) { + ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); + if (ecc & ONENAND_ECC_2BIT_ALL) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_wait: ECC error = 0x%04x\n", ecc); + return -EBADMSG; + } + } + + return 0; +} + +/** + * onenand_bufferram_offset - [DEFAULT] BufferRAM offset + * @param mtd MTD data structure + * @param area BufferRAM area + * @return offset given area + * + * Return BufferRAM offset given area + */ +static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) +{ + struct onenand_chip *this = mtd->priv; + + if (ONENAND_CURRENT_BUFFERRAM(this)) { + if (area == ONENAND_DATARAM) + return mtd->oobblock; + if (area == ONENAND_SPARERAM) + return mtd->oobsize; + } + + return 0; +} + +/** + * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area + */ +static int onenand_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, + size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + bufferram += onenand_bufferram_offset(mtd, area); + + memcpy(buffer, bufferram + offset, count); + + return 0; +} + +/** + * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area with Sync. Burst Mode + */ +static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, + size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + bufferram += onenand_bufferram_offset(mtd, area); + + this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ); + + memcpy(buffer, bufferram + offset, count); + + this->mmcontrol(mtd, 0); + + return 0; +} + +/** + * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Write the BufferRAM area + */ +static int onenand_write_bufferram(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, + size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + bufferram += onenand_bufferram_offset(mtd, area); + + memcpy(bufferram + offset, buffer, count); + + return 0; +} + +/** + * onenand_check_bufferram - [GENERIC] Check BufferRAM information + * @param mtd MTD data structure + * @param addr address to check + * @return 1 if there are valid data, otherwise 0 + * + * Check bufferram if there is data we required + */ +static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) +{ + struct onenand_chip *this = mtd->priv; + int block, page; + int i; + + block = (int)(addr >> this->erase_shift); + page = (int)(addr >> this->page_shift); + page &= this->page_mask; + + i = ONENAND_CURRENT_BUFFERRAM(this); + + /* Is there valid data? */ + if (this->bufferram[i].block == block && + this->bufferram[i].page == page && this->bufferram[i].valid) + return 1; + + return 0; +} + +/** + * onenand_update_bufferram - [GENERIC] Update BufferRAM information + * @param mtd MTD data structure + * @param addr address to update + * @param valid valid flag + * + * Update BufferRAM information + */ +static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr, + int valid) +{ + struct onenand_chip *this = mtd->priv; + int block, page; + int i; + + block = (int)(addr >> this->erase_shift); + page = (int)(addr >> this->page_shift); + page &= this->page_mask; + + /* Invalidate BufferRAM */ + for (i = 0; i < MAX_BUFFERRAM; i++) { + if (this->bufferram[i].block == block && + this->bufferram[i].page == page) + this->bufferram[i].valid = 0; + } + + /* Update BufferRAM */ + i = ONENAND_CURRENT_BUFFERRAM(this); + this->bufferram[i].block = block; + this->bufferram[i].page = page; + this->bufferram[i].valid = valid; + + return 0; +} + +/** + * onenand_get_device - [GENERIC] Get chip for selected access + * @param mtd MTD device structure + * @param new_state the state which is requested + * + * Get the device and lock it for exclusive access + */ +static void onenand_get_device(struct mtd_info *mtd, int new_state) +{ + /* Do nothing */ +} + +/** + * onenand_release_device - [GENERIC] release chip + * @param mtd MTD device structure + * + * Deselect, release chip lock and wake up anyone waiting on the device + */ +static void onenand_release_device(struct mtd_info *mtd) +{ + /* Do nothing */ +} + +/** + * onenand_read_ecc - [MTD Interface] Read data with ECC + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * @param oob_buf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND read with ECC + */ +static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, + u_char * oob_buf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, column; + int thislen; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", + (unsigned int)from, (int)len); + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_ecc: Attempt read beyond end of device\n"); + *retlen = 0; + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + while (read < len) { + thislen = min_t(int, mtd->oobblock, len - read); + + column = from & (mtd->oobblock - 1); + if (column + thislen > mtd->oobblock) + thislen = mtd->oobblock - column; + + if (!onenand_check_bufferram(mtd, from)) { + this->command(mtd, ONENAND_CMD_READ, from, + mtd->oobblock); + ret = this->wait(mtd, FL_READING); + /* First copy data and check return value for ECC handling */ + onenand_update_bufferram(mtd, from, 1); + } + + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, + thislen); + + read += thislen; + if (read == len) + break; + + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_ecc: read failed = %d\n", ret); + break; + } + + from += thislen; + buf += thislen; + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + *retlen = read; + return ret; +} + +/** + * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * + * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL +*/ +int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf) +{ + return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); +} + +/** + * onenand_read_oob - [MTD Interface] OneNAND read out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * + * OneNAND read out-of-band data from the spare area + */ +int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, thislen, column; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", + (unsigned int)from, (int)len); + + /* Initialize return length value */ + *retlen = 0; + + /* Do not allow reads past end of device */ + if (unlikely((from + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_oob: Attempt read beyond end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + column = from & (mtd->oobsize - 1); + + while (read < len) { + thislen = mtd->oobsize - column; + thislen = min_t(int, thislen, len); + + this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + + onenand_update_bufferram(mtd, from, 0); + + ret = this->wait(mtd, FL_READING); + /* First copy data and check return value for ECC handling */ + + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, + thislen); + + read += thislen; + if (read == len) + break; + + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_read_oob: read failed = %d\n", ret); + break; + } + + buf += thislen; + /* Read more? */ + if (read < len) { + /* Page size */ + from += mtd->oobblock; + column = 0; + } + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = read; + return ret; +} + +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE +/** + * onenand_verify_page - [GENERIC] verify the chip contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param block block address + * @param page page address + * + * Check DataRAM area directly + */ +static int onenand_verify_page(struct mtd_info *mtd, u_char * buf, + loff_t addr, int block, int page) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *dataram0, *dataram1; + int ret = 0; + + this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock); + + ret = this->wait(mtd, FL_READING); + if (ret) + return ret; + + onenand_update_bufferram(mtd, addr, 1); + + /* Check, if the two dataram areas are same */ + dataram0 = this->base + ONENAND_DATARAM; + dataram1 = dataram0 + mtd->oobblock; + + if (memcmp(dataram0, dataram1, mtd->oobblock)) + return -EBADMSG; + + return 0; +} +#else +#define onenand_verify_page(...) (0) +#endif + +#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0) + +/** + * onenand_write_ecc - [MTD Interface] OneNAND write with ECC + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * @param eccbuf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND write with ECC + */ +static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf, + u_char * eccbuf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + int written = 0; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", + (unsigned int)to, (int)len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow writes past end of device */ + if (unlikely((to + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: Attempt write to past end of device\n"); + return -EINVAL; + } + + /* Reject writes, which are not page aligned */ + if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: Attempt to write not page aligned data\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->oobblock, len - written); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + + this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, + mtd->oobsize); + + this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); + + onenand_update_bufferram(mtd, to, 1); + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: write filaed %d\n", ret); + break; + } + + written += thislen; + + /* Only check verify write turn on */ + ret = onenand_verify_page(mtd, (u_char *) buf, to, block, page); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_ecc: verify failed %d\n", ret); + break; + } + + if (written == len) + break; + + to += thislen; + buf += thislen; + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return ret; +} + +/** + * onenand_write - [MTD Interface] compability function for onenand_write_ecc + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * This function simply calls onenand_write_ecc + * with oob buffer and oobsel = NULL + */ +int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) +{ + return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL); +} + +/** + * onenand_write_oob - [MTD Interface] OneNAND write out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * OneNAND write out-of-band + */ +int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) +{ + struct onenand_chip *this = mtd->priv; + int column, status; + int written = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", + (unsigned int)to, (int)len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow writes past end of device */ + if (unlikely((to + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_write_oob: Attempt write to past end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->oobsize, len - written); + + column = to & (mtd->oobsize - 1); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); + + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, + mtd->oobsize); + this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, + thislen); + + this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + + onenand_update_bufferram(mtd, to, 0); + + status = this->wait(mtd, FL_WRITING); + if (status) + break; + + written += thislen; + if (written == len) + break; + + to += thislen; + buf += thislen; + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return 0; +} + +/** + * onenand_erase - [MTD Interface] erase block(s) + * @param mtd MTD device structure + * @param instr erase instruction + * + * Erase one ore more blocks + */ +int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct onenand_chip *this = mtd->priv; + unsigned int block_size; + loff_t addr; + int len; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", + (unsigned int)instr->addr, (unsigned int)instr->len); + + block_size = (1 << this->erase_shift); + + /* Start address must align on block boundary */ + if (unlikely(instr->addr & (block_size - 1))) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n"); + return -EINVAL; + } + + /* Length must align on block boundary */ + if (unlikely(instr->len & (block_size - 1))) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Length not block aligned\n"); + return -EINVAL; + } + + /* Do not allow erase past end of device */ + if (unlikely((instr->len + instr->addr) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Erase past end of device\n"); + return -EINVAL; + } + + instr->fail_addr = 0xffffffff; + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_ERASING); + + /* Loop throught the pages */ + len = instr->len; + addr = instr->addr; + + instr->state = MTD_ERASING; + + while (len) { + + /* TODO Check badblock */ + + this->command(mtd, ONENAND_CMD_ERASE, addr, block_size); + + ret = this->wait(mtd, FL_ERASING); + /* Check, if it is write protected */ + if (ret) { + if (ret == -EPERM) + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Device is write protected!!!\n"); + else + DEBUG(MTD_DEBUG_LEVEL0, + "onenand_erase: Failed erase, block %d\n", + (unsigned)(addr >> this->erase_shift)); + instr->state = MTD_ERASE_FAILED; + instr->fail_addr = addr; + goto erase_exit; + } + + len -= block_size; + addr += block_size; + } + + instr->state = MTD_ERASE_DONE; + + erase_exit: + + ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_sync - [MTD Interface] sync + * @param mtd MTD device structure + * + * Sync is actually a wait for chip ready function + */ +void onenand_sync(struct mtd_info *mtd) +{ + DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n"); + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_SYNCING); + + /* Release it and go back */ + onenand_release_device(mtd); +} + +/** + * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + */ +int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + /* + * TODO + * 1. Bad block table (BBT) + * -> using NAND BBT to support JFFS2 + * 2. Bad block management (BBM) + * -> bad block replace scheme + * + * Currently we do nothing + */ + return 0; +} + +/** + * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + */ +int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + /* see above */ + return 0; +} + +/** + * onenand_unlock - [MTD Interface] Unlock block(s) + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * @param len number of bytes to unlock + * + * Unlock one or more blocks + */ +int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct onenand_chip *this = mtd->priv; + int start, end, block, value, status; + + start = ofs >> this->erase_shift; + end = len >> this->erase_shift; + + /* Continuous lock scheme */ + if (this->options & ONENAND_CONT_LOCK) { + /* Set start block address */ + this->write_word(start, + this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Set end block address */ + this->write_word(end - 1, + this->base + ONENAND_REG_END_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_UNLOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) + printk(KERN_ERR "wp status = 0x%x\n", status); + + return 0; + } + + /* Block lock scheme */ + for (block = start; block < end; block++) { + /* Set start block address */ + this->write_word(block, + this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_UNLOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Set block address for read block status */ + value = onenand_block_address(this->device_id, block); + this->write_word(value, + this->base + ONENAND_REG_START_ADDRESS1); + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) + printk(KERN_ERR "block = %d, wp status = 0x%x\n", + block, status); + } + + return 0; +} + +/** + * onenand_print_device_info - Print device ID + * @param device device ID + * + * Print device ID + */ +void onenand_print_device_info(int device, int verbose) +{ + int vcc, demuxed, ddp, density; + + if (!verbose) + return; + + vcc = device & ONENAND_DEVICE_VCC_MASK; + demuxed = device & ONENAND_DEVICE_IS_DEMUX; + ddp = device & ONENAND_DEVICE_IS_DDP; + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", + demuxed ? "" : "Muxed ", + ddp ? "(DDP)" : "", + (16 << density), vcc ? "2.65/3.3" : "1.8", device); +} + +static const struct onenand_manufacturers onenand_manuf_ids[] = { + {ONENAND_MFR_SAMSUNG, "Samsung"}, + {ONENAND_MFR_UNKNOWN, "Unknown"} +}; + +/** + * onenand_check_maf - Check manufacturer ID + * @param manuf manufacturer ID + * + * Check manufacturer ID + */ +static int onenand_check_maf(int manuf) +{ + int i; + + for (i = 0; onenand_manuf_ids[i].id; i++) { + if (manuf == onenand_manuf_ids[i].id) + break; + } + +#ifdef ONENAND_DEBUG + printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", + onenand_manuf_ids[i].name, manuf); +#endif + + return (i != ONENAND_MFR_UNKNOWN); +} + +/** + * onenand_probe - [OneNAND Interface] Probe the OneNAND device + * @param mtd MTD device structure + * + * OneNAND detection method: + * Compare the the values from command with ones from register + */ +static int onenand_probe(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int bram_maf_id, bram_dev_id, maf_id, dev_id; + int version_id; + int density; + + /* Send the command for reading device ID from BootRAM */ + this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM); + + /* Read manufacturer and device IDs from BootRAM */ + bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0); + bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2); + + /* Check manufacturer ID */ + if (onenand_check_maf(bram_maf_id)) + return -ENXIO; + + /* Reset OneNAND to read default register values */ + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM); + + { + int i; + for (i = 0; i < 10000; i++) ; + } + + /* Read manufacturer and device IDs from Register */ + maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); + + /* Check OneNAND device */ + if (maf_id != bram_maf_id || dev_id != bram_dev_id) + return -ENXIO; + + /* Flash device information */ + onenand_print_device_info(dev_id, 0); + this->device_id = dev_id; + + density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; + this->chipsize = (16 << density) << 20; + + /* OneNAND page size & block size */ + /* The data buffer size is equal to page size */ + mtd->oobblock = + this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + mtd->oobsize = mtd->oobblock >> 5; + /* Pagers per block is always 64 in OneNAND */ + mtd->erasesize = mtd->oobblock << 6; + + this->erase_shift = ffs(mtd->erasesize) - 1; + this->page_shift = ffs(mtd->oobblock) - 1; + this->ppb_shift = (this->erase_shift - this->page_shift); + this->page_mask = (mtd->erasesize / mtd->oobblock) - 1; + + /* REVIST: Multichip handling */ + + mtd->size = this->chipsize; + + /* Version ID */ + version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); +#ifdef ONENAND_DEBUG + printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id); +#endif + + /* Lock scheme */ + if (density <= ONENAND_DEVICE_DENSITY_512Mb && + !(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) { + printk(KERN_INFO "Lock scheme is Continues Lock\n"); + this->options |= ONENAND_CONT_LOCK; + } + + return 0; +} + +/** + * onenand_scan - [OneNAND Interface] Scan for the OneNAND device + * @param mtd MTD device structure + * @param maxchips Number of chips to scan for + * + * This fills out all the not initialized function pointers + * with the defaults. + * The flash ID is read and the mtd/chip structures are + * filled with the appropriate values. + */ +int onenand_scan(struct mtd_info *mtd, int maxchips) +{ + struct onenand_chip *this = mtd->priv; + + if (!this->read_word) + this->read_word = onenand_readw; + if (!this->write_word) + this->write_word = onenand_writew; + + if (!this->command) + this->command = onenand_command; + if (!this->wait) + this->wait = onenand_wait; + + if (!this->read_bufferram) + this->read_bufferram = onenand_read_bufferram; + if (!this->write_bufferram) + this->write_bufferram = onenand_write_bufferram; + + if (onenand_probe(mtd)) + return -ENXIO; + + /* Set Sync. Burst Read after probing */ + if (this->mmcontrol) { + printk(KERN_INFO "OneNAND Sync. Burst Read support\n"); + this->read_bufferram = onenand_sync_read_bufferram; + } + + onenand_unlock(mtd, 0, mtd->size); + + return onenand_default_bbt(mtd); +} + +/** + * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device + * @param mtd MTD device structure + */ +void onenand_release(struct mtd_info *mtd) +{ +} + +/* + * OneNAND initialization at U-Boot + */ +struct mtd_info onenand_mtd; +struct onenand_chip onenand_chip; + +void onenand_init(void) +{ + memset(&onenand_mtd, 0, sizeof(struct mtd_info)); + memset(&onenand_chip, 0, sizeof(struct onenand_chip)); + + onenand_chip.base = (void *)CFG_ONENAND_BASE; + onenand_mtd.priv = &onenand_chip; + + onenand_scan(&onenand_mtd, 1); + + puts("OneNAND: "); + print_size(onenand_mtd.size, "\n"); +} + +#endif /* CONFIG_CMD_ONENAND */ diff --git a/drivers/onenand/onenand_bbt.c b/drivers/onenand/onenand_bbt.c new file mode 100644 index 0000000..5a610ee --- /dev/null +++ b/drivers/onenand/onenand_bbt.c @@ -0,0 +1,265 @@ +/* + * linux/drivers/mtd/onenand/onenand_bbt.c + * + * Bad Block Table support for the OneNAND driver + * + * Copyright(c) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * TODO: + * Split BBT core and chip specific BBT. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> + +#ifdef CONFIG_CMD_ONENAND + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <malloc.h> + +#include <asm/errno.h> + +/** + * check_short_pattern - [GENERIC] check if a pattern is in the buffer + * @param buf the buffer to search + * @param len the length of buffer to search + * @param paglen the pagelength + * @param td search pattern descriptor + * + * Check for a pattern at the given place. Used to search bad block + * tables and good / bad block identifiers. Same as check_pattern, but + * no optional empty check and the pattern is expected to start + * at offset 0. + */ +static int check_short_pattern(uint8_t * buf, int len, int paglen, + struct nand_bbt_descr *td) +{ + int i; + uint8_t *p = buf; + + /* Compare the pattern */ + for (i = 0; i < td->len; i++) { + if (p[i] != td->pattern[i]) + return -1; + } + return 0; +} + +/** + * create_bbt - [GENERIC] Create a bad block table by scanning the device + * @param mtd MTD device structure + * @param buf temporary buffer + * @param bd descriptor for the good/bad block search pattern + * @param chip create the table for a specific chip, -1 read all chips. + * Applies only if NAND_BBT_PERCHIP option is set + * + * Create a bad block table by scanning the device + * for the given good/bad block identify pattern + */ +static int create_bbt(struct mtd_info *mtd, uint8_t * buf, + struct nand_bbt_descr *bd, int chip) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + int i, j, numblocks, len, scanlen; + int startblock; + loff_t from; + size_t readlen, ooblen; + + printk(KERN_INFO "Scanning device for bad blocks\n"); + + len = 1; + + /* We need only read few bytes from the OOB area */ + scanlen = ooblen = 0; + readlen = bd->len; + + /* chip == -1 case only */ + /* Note that numblocks is 2 * (real numblocks) here; + * see i += 2 below as it makses shifting and masking less painful + */ + numblocks = mtd->size >> (bbm->bbt_erase_shift - 1); + startblock = 0; + from = 0; + + for (i = startblock; i < numblocks;) { + int ret; + + for (j = 0; j < len; j++) { + size_t retlen; + + /* No need to read pages fully, + * just read required OOB bytes */ + ret = onenand_read_oob(mtd, + from + j * mtd->oobblock + + bd->offs, readlen, &retlen, + &buf[0]); + + if (ret && ret != -EAGAIN) { + printk("ret = %d\n", ret); + return ret; + } + + if (check_short_pattern + (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { + bbm->bbt[i >> 3] |= 0x03 << (i & 0x6); + printk(KERN_WARNING + "Bad eraseblock %d at 0x%08x\n", i >> 1, + (unsigned int)from); + break; + } + } + i += 2; + from += (1 << bbm->bbt_erase_shift); + } + + return 0; +} + +/** + * onenand_memory_bbt - [GENERIC] create a memory based bad block table + * @param mtd MTD device structure + * @param bd descriptor for the good/bad block search pattern + * + * The function creates a memory based bbt by scanning the device + * for manufacturer / software marked good / bad blocks + */ +static inline int onenand_memory_bbt(struct mtd_info *mtd, + struct nand_bbt_descr *bd) +{ + unsigned char data_buf[MAX_ONENAND_PAGESIZE]; + + bd->options &= ~NAND_BBT_SCANEMPTY; + return create_bbt(mtd, data_buf, bd, -1); +} + +/** + * onenand_isbad_bbt - [OneNAND Interface] Check if a block is bad + * @param mtd MTD device structure + * @param offs offset in the device + * @param allowbbt allow access to bad block table region + */ +static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + int block; + uint8_t res; + + /* Get block number * 2 */ + block = (int)(offs >> (bbm->bbt_erase_shift - 1)); + res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03; + + DEBUG(MTD_DEBUG_LEVEL2, + "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n", + (unsigned int)offs, block >> 1, res); + + switch ((int)res) { + case 0x00: + return 0; + case 0x01: + return 1; + case 0x02: + return allowbbt ? 0 : 1; + } + + return 1; +} + +/** + * onenand_scan_bbt - [OneNAND Interface] scan, find, read and maybe create bad block table(s) + * @param mtd MTD device structure + * @param bd descriptor for the good/bad block search pattern + * + * The function checks, if a bad block table(s) is/are already + * available. If not it scans the device for manufacturer + * marked good / bad blocks and writes the bad block table(s) to + * the selected place. + * + * The bad block table memory is allocated here. It must be freed + * by calling the onenand_free_bbt function. + * + */ +int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + int len, ret = 0; + + len = mtd->size >> (this->erase_shift + 2); + /* Allocate memory (2bit per block) */ + bbm->bbt = malloc(len); + if (!bbm->bbt) { + printk(KERN_ERR "onenand_scan_bbt: Out of memory\n"); + return -ENOMEM; + } + /* Clear the memory bad block table */ + memset(bbm->bbt, 0x00, len); + + /* Set the bad block position */ + bbm->badblockpos = ONENAND_BADBLOCK_POS; + + /* Set erase shift */ + bbm->bbt_erase_shift = this->erase_shift; + + if (!bbm->isbad_bbt) + bbm->isbad_bbt = onenand_isbad_bbt; + + /* Scan the device to build a memory based bad block table */ + if ((ret = onenand_memory_bbt(mtd, bd))) { + printk(KERN_ERR + "onenand_scan_bbt: Can't scan flash and build the RAM-based BBT\n"); + free(bbm->bbt); + bbm->bbt = NULL; + } + + return ret; +} + +/* + * Define some generic bad / good block scan pattern which are used + * while scanning a device for factory marked good / bad blocks. + */ +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr largepage_memorybased = { + .options = 0, + .offs = 0, + .len = 2, + .pattern = scan_ff_pattern, +}; + +/** + * onenand_default_bbt - [OneNAND Interface] Select a default bad block table for the device + * @param mtd MTD device structure + * + * This function selects the default bad block table + * support for the device and calls the onenand_scan_bbt function + */ +int onenand_default_bbt(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm; + + this->bbm = malloc(sizeof(struct bbm_info)); + if (!this->bbm) + return -ENOMEM; + + bbm = this->bbm; + + memset(bbm, 0, sizeof(struct bbm_info)); + + /* 1KB page has same configuration as 2KB page */ + if (!bbm->badblock_pattern) + bbm->badblock_pattern = &largepage_memorybased; + + return onenand_scan_bbt(mtd, bbm->badblock_pattern); +} + +#endif /* CFG_CMD_ONENAND */ diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c index 14984a5..7ddcab6 100644 --- a/drivers/usb_ohci.c +++ b/drivers/usb_ohci.c @@ -93,6 +93,7 @@ #ifdef CONFIG_PCI_OHCI static struct pci_device_id ohci_pci_ids[] = { {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */ + {0x1033, 0x0035}, /* NEC PCI OHCI module ids */ /* Please add supported PCI OHCI controller ids here */ {0, 0} }; |