diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci_auto.c | 5 | ||||
| -rw-r--r-- | drivers/rtl8139.c | 1 | ||||
| -rw-r--r-- | drivers/tsec.c | 71 | ||||
| -rw-r--r-- | drivers/tsec.h | 20 |
4 files changed, 87 insertions, 10 deletions
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 15f7432..9691675 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -102,7 +102,8 @@ void pciauto_setup_device(struct pci_controller *hose, /* Check the BAR type and set our address mask */ if (bar_response & PCI_BASE_ADDRESS_SPACE) { - bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; + bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK)) + & 0xffff) + 1; bar_res = io; DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size); @@ -186,7 +187,7 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose, } else { /* We don't support prefetchable memory for now, so disable */ pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000); - pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x1000); + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0); } if (pci_io) { diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c index a95f84e..afe1a4f 100644 --- a/drivers/rtl8139.c +++ b/drivers/rtl8139.c @@ -196,6 +196,7 @@ static void rtl_disable(struct eth_device *dev); static struct pci_device_id supported[] = { {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139}, + {PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139}, {} }; diff --git a/drivers/tsec.c b/drivers/tsec.c index 7ec565c..a8a2ba2 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -14,6 +14,7 @@ #include <config.h> #include <mpc85xx.h> +#include <mpc86xx.h> #include <common.h> #include <malloc.h> #include <net.h> @@ -74,27 +75,33 @@ struct tsec_info_struct { static struct tsec_info_struct tsec_info[] = { #if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1) {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX}, +#elif defined(CONFIG_MPC86XX_TSEC1) + {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, #else { 0, 0, 0}, #endif #if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2) {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, +#elif defined(CONFIG_MPC86XX_TSEC2) + {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX}, #else { 0, 0, 0}, #endif #ifdef CONFIG_MPC85XX_FEC {FEC_PHY_ADDR, 0, FEC_PHYIDX}, #else -# if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) +#if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) || defined(CONFIG_MPC86XX_TSEC3) {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX}, -# else +#else { 0, 0, 0}, -# endif -# if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) +#endif +#if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) {TSEC4_PHY_ADDR, TSEC_REDUCED, TSEC4_PHYIDX}, -# else +#elif defined(CONFIG_MPC86XX_TSEC4) + {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX}, +#else { 0, 0, 0}, -# endif +#endif #endif }; @@ -365,7 +372,7 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private *priv) if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts (" TIMEOUT !\n"); priv->link = 0; - break; + return 0; } if ((i++ % 1000) == 0) { @@ -467,6 +474,32 @@ uint mii_parse_cis8201(uint mii_reg, struct tsec_private *priv) return 0; } +/* Parse the vsc8244's status register for speed and duplex + * information */ +uint mii_parse_vsc8244(uint mii_reg, struct tsec_private *priv) +{ + uint speed; + + if(mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX) + priv->duplexity = 1; + else + priv->duplexity = 0; + + speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED; + switch(speed) { + case MIIM_VSC8244_AUXCONSTAT_GBIT: + priv->speed = 1000; + break; + case MIIM_VSC8244_AUXCONSTAT_100: + priv->speed = 100; + break; + default: + priv->speed = 10; + break; + } + + return 0; +} /* Parse the DM9161's status register for speed and duplex @@ -859,6 +892,29 @@ struct phy_info phy_info_cis8201 = { {miim_end,} }, }; +struct phy_info phy_info_VSC8244 = { + 0x3f1b, + "Vitesse VSC8244", + 6, + (struct phy_cmd[]) { /* config */ + /* Override PHY config settings */ + /* Configure some basic stuff */ + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd[]) { /* startup */ + /* Read the Status (2x to make sure link is right) */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244}, + {miim_end,} + }, + (struct phy_cmd[]) { /* shutdown */ + {miim_end,} + }, +}; struct phy_info phy_info_dm9161 = { @@ -1001,6 +1057,7 @@ struct phy_info *phy_info[] = { &phy_info_M88E1111S, &phy_info_dm9161, &phy_info_lxt971, + &phy_info_VSC8244, &phy_info_dp83865, NULL }; diff --git a/drivers/tsec.h b/drivers/tsec.h index b55b299..31f1867 100644 --- a/drivers/tsec.h +++ b/drivers/tsec.h @@ -27,7 +27,7 @@ #define TSEC_SIZE 0x01000 /* FIXME: Should these be pushed back to 83xx and 85xx config files? */ -#if defined(CONFIG_MPC85xx) +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) #elif defined(CONFIG_MPC83XX) #define TSEC_BASE_ADDR (CFG_IMMRBAR + CFG_TSEC1_OFFSET) @@ -133,6 +133,24 @@ #define MIIM_GBIT_CON 0x09 #define MIIM_GBIT_CON_ADVERT 0x0e00 +/* Entry for Vitesse VSC8244 regs starts here */ +/* Vitesse VSC8244 Auxiliary Control/Status Register */ +#define MIIM_VSC8244_AUX_CONSTAT 0x1c +#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 +#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 +#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 +#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 +#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 + +/* Vitesse VSC8244 Extended PHY Control Register 1 */ +#define MIIM_VSC8244_EPHY_CON 0x17 +#define MIIM_VSC8244_EPHYCON_INIT 0x0006 + +/* Vitesse VSC8244 Serial LED Control Register */ +#define MIIM_VSC8244_LED_CON 0x1b +#define MIIM_VSC8244_LEDCON_INIT 0xF011 + /* 88E1011 PHY Status Register */ #define MIIM_88E1011_PHY_STATUS 0x11 #define MIIM_88E1011_PHYSTAT_SPEED 0xc000 |