diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Makefile | 2 | ||||
| -rw-r--r-- | drivers/cfb_console.c | 157 | ||||
| -rw-r--r-- | drivers/sed13806.c | 306 |
3 files changed, 407 insertions, 58 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index 3d3bbce..afea752 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -31,7 +31,7 @@ OBJS = 3c589.o 5701rls.o bcm570x.o bcm570x_autoneg.o \ cfb_console.o cs8900.o dc2114x.o eepro100.o \ i8042.o natsemi.o ns16550.o ns8382x.o ns87308.o \ pci.o pci_auto.o pci_indirect.o \ - pcnet.o serial.o \ + pcnet.o sed13806.o serial.o \ smc91111.o smiLynxEM.o sym53c8xx.o \ tigon3.o w83c553f.o ct69000.o diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c index ee2fa9c..d428b17 100644 --- a/drivers/cfb_console.c +++ b/drivers/cfb_console.c @@ -65,6 +65,7 @@ CONFIG_CONSOLE_TIME - display time/date in upper right corner, needs CFG_CMD_DATE and CONFIG_CONSOLE_CURSOR CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner + CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo CONFIG_CONSOLE_EXTRA_INFO - display additional board information strings that normaly goes to serial port. This define requires a board specific function: @@ -93,6 +94,8 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the #ifdef CONFIG_CFB_CONSOLE +#include <malloc.h> + /*****************************************************************************/ /* Console device defines with SMI graphic */ /* Any other graphic must change this section */ @@ -116,6 +119,16 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the #endif /*****************************************************************************/ +/* Defines for the SED13806 driver */ +/*****************************************************************************/ +#ifdef CONFIG_VIDEO_SED13806 + +#define VIDEO_FB_LITTLE_ENDIAN +#define VIDEO_HW_RECTFILL +#define VIDEO_HW_BITBLT +#endif + +/*****************************************************************************/ /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */ /*****************************************************************************/ #include <video_fb.h> @@ -217,6 +230,14 @@ void console_cursor (int state); #endif /* CONFIG_VIDEO_HW_CURSOR */ #ifdef CONFIG_VIDEO_LOGO +#ifdef CONFIG_VIDEO_BMP_LOGO +#include <bmp_logo.h> +#define VIDEO_LOGO_WIDTH BMP_LOGO_WIDTH +#define VIDEO_LOGO_HEIGHT BMP_LOGO_HEIGHT +#define VIDEO_LOGO_LUT_OFFSET BMP_LOGO_OFFSET +#define VIDEO_LOGO_COLORS BMP_LOGO_COLORS + +#else /* CONFIG_VIDEO_BMP_LOGO */ #define LINUX_LOGO_WIDTH 80 #define LINUX_LOGO_HEIGHT 80 #define LINUX_LOGO_COLORS 214 @@ -225,13 +246,15 @@ void console_cursor (int state); #include <linux_logo.h> #define VIDEO_LOGO_WIDTH LINUX_LOGO_WIDTH #define VIDEO_LOGO_HEIGHT LINUX_LOGO_HEIGHT - +#define VIDEO_LOGO_LUT_OFFSET LINUX_LOGO_LUT_OFFSET +#define VIDEO_LOGO_COLORS LINUX_LOGO_COLORS +#endif /* CONFIG_VIDEO_BMP_LOGO */ #define VIDEO_INFO_X (VIDEO_LOGO_WIDTH) #define VIDEO_INFO_Y (VIDEO_FONT_HEIGHT/2) -#else +#else /* CONFIG_VIDEO_LOGO */ #define VIDEO_LOGO_WIDTH 0 #define VIDEO_LOGO_HEIGHT 0 -#endif +#endif /* CONFIG_VIDEO_LOGO */ #define VIDEO_COLS VIDEO_VISIBLE_COLS #define VIDEO_ROWS VIDEO_VISIBLE_ROWS @@ -463,11 +486,7 @@ static inline void video_drawstring(int xx, int yy, unsigned char *s) static void video_putchar(int xx, int yy, unsigned char c) { -#ifdef CONFIG_VIDEO_LOGO video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1); -#else - video_drawchars (xx, yy, &c, 1); -#endif } /*****************************************************************************/ @@ -676,83 +695,107 @@ void video_puts (const char *s) #ifdef CONFIG_VIDEO_LOGO void logo_plot (void *screen, int width, int x, int y) { - int skip = (width - LINUX_LOGO_WIDTH) * VIDEO_PIXEL_SIZE, + + int skip = (width - VIDEO_LOGO_WIDTH) * VIDEO_PIXEL_SIZE, xcount, i, - ycount = LINUX_LOGO_HEIGHT; + ycount = VIDEO_LOGO_HEIGHT; unsigned char - *source = linux_logo, + *source, *dest = (unsigned char *) screen + ((y * width * VIDEO_PIXEL_SIZE) + x), - r, g, b; - + r, g, b, *logo_red, *logo_blue, *logo_green; + +#ifdef CONFIG_VIDEO_BMP_LOGO + source = bmp_logo_bitmap; + + /* Allocate temporary space for computing colormap */ + logo_red = malloc (BMP_LOGO_COLORS); + logo_green = malloc (BMP_LOGO_COLORS); + logo_blue = malloc (BMP_LOGO_COLORS); + /* Compute color map */ + for (i = 0; i < VIDEO_LOGO_COLORS; i++) { + logo_red [i] = (bmp_logo_palette [i] & 0x0f00) >> 4; + logo_green [i] = (bmp_logo_palette [i] & 0x00f0); + logo_blue [i] = (bmp_logo_palette [i] & 0x000f) << 4; + } +#else + source = linux_logo; + logo_red = linux_logo_red; + logo_green = linux_logo_green; + logo_blue = linux_logo_blue; +#endif + if (VIDEO_DATA_FORMAT == GDF__8BIT_INDEX) { - for (i = 0; i < LINUX_LOGO_COLORS; i++) + for (i = 0; i < VIDEO_LOGO_COLORS; i++) { - r = (unsigned char)linux_logo_red [i]; - g = (unsigned char)linux_logo_green[i]; - b = (unsigned char)linux_logo_blue [i]; - video_set_lut (LINUX_LOGO_LUT_OFFSET + i, r, g, b); + video_set_lut (i + VIDEO_LOGO_LUT_OFFSET, + logo_red [i], logo_green [i], logo_blue [i]); } } while (ycount--) { - xcount = LINUX_LOGO_WIDTH; - while (xcount--) - { - r = (unsigned char)linux_logo_red [*source - LINUX_LOGO_LUT_OFFSET]; - g = (unsigned char)linux_logo_green[*source - LINUX_LOGO_LUT_OFFSET]; - b = (unsigned char)linux_logo_blue [*source - LINUX_LOGO_LUT_OFFSET]; - - switch (VIDEO_DATA_FORMAT) + xcount = VIDEO_LOGO_WIDTH; + while (xcount--) { - case GDF__8BIT_INDEX: - *dest = *source; - break; - case GDF__8BIT_332RGB: - *dest = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6); - break; - case GDF_15BIT_555RGB: - *(unsigned short *)dest = - SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3))); - break; - case GDF_16BIT_565RGB: - *(unsigned short *)dest = - SWAP16((unsigned short)(((r>>3)<<11) | ((g>>2)<<5) | (b>>3))); - break; - case GDF_32BIT_X888RGB: - *(unsigned long *)dest = - SWAP32((unsigned long)((r<<16) | (g<<8) | b)); - break; - case GDF_24BIT_888RGB: + r = logo_red [*source - VIDEO_LOGO_LUT_OFFSET]; + g = logo_green [*source - VIDEO_LOGO_LUT_OFFSET]; + b = logo_blue [*source - VIDEO_LOGO_LUT_OFFSET]; + + switch (VIDEO_DATA_FORMAT) + { + case GDF__8BIT_INDEX: + *dest = *source; + break; + case GDF__8BIT_332RGB: + *dest = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6); + break; + case GDF_15BIT_555RGB: + *(unsigned short *)dest = + SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3))); + break; + case GDF_16BIT_565RGB: + *(unsigned short *)dest = + SWAP16((unsigned short)(((r>>3)<<11) | ((g>>2)<<5) | (b>>3))); + break; + case GDF_32BIT_X888RGB: + *(unsigned long *)dest = + SWAP32((unsigned long)((r<<16) | (g<<8) | b)); + break; + case GDF_24BIT_888RGB: #ifdef VIDEO_FB_LITTLE_ENDIAN - dest[0] = b; - dest[1] = g; - dest[2] = r; + dest[0] = b; + dest[1] = g; + dest[2] = r; #else - dest[0] = r; - dest[1] = g; - dest[2] = b; + dest[0] = r; + dest[1] = g; + dest[2] = b; #endif - break; + break; + } + source++; + dest += VIDEO_PIXEL_SIZE; } - source++; - dest += VIDEO_PIXEL_SIZE; - } - dest += skip; + dest += skip; } +#ifdef CONFIG_VIDEO_BMP_LOGO + free (logo_red); + free (logo_green); + free (logo_blue); +#endif } - /*****************************************************************************/ static void *video_logo (void) { char info[128]; + extern char version_string; logo_plot (video_fb_address, VIDEO_COLS, 0, 0); - sprintf(info, " %s (%s - %s)", U_BOOT_VERSION, __DATE__, __TIME__); + sprintf(info, " %s", &version_string); video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info); #ifdef CONFIG_CONSOLE_EXTRA_INFO diff --git a/drivers/sed13806.c b/drivers/sed13806.c new file mode 100644 index 0000000..55fceef --- /dev/null +++ b/drivers/sed13806.c @@ -0,0 +1,306 @@ +/* + * (C) Copyright 2002 + * Stäubli Faverges - <www.staubli.com> + * Pierre AUBERT p.aubert@staubli.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* Video support for Epson SED13806 chipset */ + +#include <common.h> + +#ifdef CONFIG_VIDEO_SED13806 + +#include <video_fb.h> +#include <sed13806.h> + +#define readByte(ptrReg) \ + *(volatile unsigned char *)(sed13806.isaBase + ptrReg) + +#define writeByte(ptrReg,value) \ + *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value + +#define writeWord(ptrReg,value) \ + (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00)) + + +GraphicDevice sed13806; + +/*----------------------------------------------------------------------------- + * EpsonSetRegs -- + *----------------------------------------------------------------------------- + */ +static void EpsonSetRegs (void) +{ + /* the content of the chipset register depends on the board (clocks, ...)*/ + const S1D_REGS *preg = board_get_regs (); + while (preg -> Index) { + writeByte (preg -> Index, preg -> Value); + preg ++; + } +} + +/*----------------------------------------------------------------------------- + * video_hw_init -- + *----------------------------------------------------------------------------- + */ +void *video_hw_init (void) +{ + unsigned int *vm, i; + + memset (&sed13806, 0, sizeof (GraphicDevice)); + + /* Initialization of the access to the graphic chipset + Retreive base address of the chipset + (see board/RPXClassic/eccx.c) */ + if ((sed13806.isaBase = board_video_init ()) == 0) { + return (NULL); + } + + sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET; + sed13806.winSizeX = board_get_width (); + sed13806.winSizeY = board_get_height (); + +#if defined(CONFIG_VIDEO_SED13806_8BPP) + sed13806.gdfIndex = GDF__8BIT_INDEX; + sed13806.gdfBytesPP = 1; + +#elif defined(CONFIG_VIDEO_SED13806_16BPP) + sed13806.gdfIndex = GDF_16BIT_565RGB; + sed13806.gdfBytesPP = 2; + +#else +#error Unsupported SED13806 BPP +#endif + + sed13806.memSize = sed13806.winSizeX * sed13806.winSizeY * sed13806.gdfBytesPP; + + /* Load SED registers */ + EpsonSetRegs (); + + /* (see board/RPXClassic/RPXClassic.c) */ + board_validate_screen (sed13806.isaBase); + + /* Clear video memory */ + i = sed13806.memSize/4; + vm = (unsigned int *)sed13806.frameAdrs; + while(i--) + *vm++ = 0; + + + return (&sed13806); +} +/*----------------------------------------------------------------------------- + * Epson_wait_idle -- Wait for hardware to become idle + *----------------------------------------------------------------------------- + */ +static void Epson_wait_idle (void) +{ + while (readByte (BLT_CTRL0) & 0x80); + + /* Read a word in the BitBLT memory area to shutdown the BitBLT engine */ + *(volatile unsigned short *)(sed13806.isaBase + BLT_REG); +} + +/*----------------------------------------------------------------------------- + * video_hw_bitblt -- + *----------------------------------------------------------------------------- + */ +void video_hw_bitblt ( + unsigned int bpp, /* bytes per pixel */ + unsigned int src_x, /* source pos x */ + unsigned int src_y, /* source pos y */ + unsigned int dst_x, /* dest pos x */ + unsigned int dst_y, /* dest pos y */ + unsigned int dim_x, /* frame width */ + unsigned int dim_y /* frame height */ + ) +{ + register GraphicDevice *pGD = (GraphicDevice *)&sed13806; + unsigned long srcAddr, dstAddr; + unsigned int stride = bpp * pGD -> winSizeX; + + srcAddr = (src_y * stride) + (src_x * bpp); + dstAddr = (dst_y * stride) + (dst_x * bpp); + + Epson_wait_idle (); + + writeByte(BLT_ROP,0x0C); // source + writeByte(BLT_OP,0x02);// move blit in positive direction with ROP + writeWord(BLT_MEM_OFF0, stride / 2); + if (pGD -> gdfIndex == GDF__8BIT_INDEX) { + writeByte(BLT_CTRL1,0x00); + } + else { + writeByte(BLT_CTRL1,0x01); + } + + writeWord(BLT_WIDTH0,(dim_x - 1)); + writeWord(BLT_HEIGHT0,(dim_y - 1)); + + /* set up blit registers */ + writeByte(BLT_SRC_ADDR0,srcAddr); + writeByte(BLT_SRC_ADDR1,srcAddr>>8); + writeByte(BLT_SRC_ADDR2,srcAddr>>16); + + writeByte(BLT_DST_ADDR0,dstAddr); + writeByte(BLT_DST_ADDR1,dstAddr>>8); + writeByte(BLT_DST_ADDR2,dstAddr>>16); + + /* Engage the blt engine */ + /* rectangular region for src and dst */ + writeByte(BLT_CTRL0,0x80); + + /* wait untill current blits finished */ + Epson_wait_idle (); +} +/*----------------------------------------------------------------------------- + * video_hw_rectfill -- + *----------------------------------------------------------------------------- + */ +void video_hw_rectfill ( + unsigned int bpp, /* bytes per pixel */ + unsigned int dst_x, /* dest pos x */ + unsigned int dst_y, /* dest pos y */ + unsigned int dim_x, /* frame width */ + unsigned int dim_y, /* frame height */ + unsigned int color /* fill color */ + ) +{ + register GraphicDevice *pGD = (GraphicDevice *)&sed13806; + unsigned long dstAddr; + unsigned int stride = bpp * pGD -> winSizeX; + + dstAddr = (dst_y * stride) + (dst_x * bpp); + + Epson_wait_idle (); + + /* set up blit registers */ + writeByte(BLT_DST_ADDR0,dstAddr); + writeByte(BLT_DST_ADDR1,dstAddr>>8); + writeByte(BLT_DST_ADDR2,dstAddr>>16); + + writeWord(BLT_WIDTH0,(dim_x - 1)); + writeWord(BLT_HEIGHT0,(dim_y - 1)); + writeWord(BLT_FGCOLOR0,color); + + writeByte(BLT_OP,0x0C); /* solid fill */ + writeWord(BLT_MEM_OFF0,stride / 2); + + if (pGD -> gdfIndex == GDF__8BIT_INDEX) { + writeByte(BLT_CTRL1,0x00); + } + else { + writeByte(BLT_CTRL1,0x01); + } + + /* Engage the blt engine */ + /* rectangular region for src and dst */ + writeByte(BLT_CTRL0,0x80); + + /* wait untill current blits finished */ + Epson_wait_idle (); +} + +/*----------------------------------------------------------------------------- + * video_set_lut -- + *----------------------------------------------------------------------------- + */ +void video_set_lut ( + unsigned int index, /* color number */ + unsigned char r, /* red */ + unsigned char g, /* green */ + unsigned char b /* blue */ + ) +{ + writeByte(REG_LUT_ADDR, index ); + writeByte(REG_LUT_DATA, r); + writeByte(REG_LUT_DATA, g); + writeByte(REG_LUT_DATA, b); +} +#ifdef CONFIG_VIDEO_HW_CURSOR +/*----------------------------------------------------------------------------- + * video_set_hw_cursor -- + *----------------------------------------------------------------------------- + */ +void video_set_hw_cursor (int x, int y) +{ + writeByte (LCD_CURSOR_XL, (x & 0xff)); + writeByte (LCD_CURSOR_XM, (x >> 8)); + writeByte (LCD_CURSOR_YL, (y & 0xff)); + writeByte (LCD_CURSOR_YM, (y >> 8)); +} + +/*----------------------------------------------------------------------------- + * video_init_hw_cursor -- + *----------------------------------------------------------------------------- + */ +void video_init_hw_cursor (int font_width, int font_height) +{ + volatile unsigned char *ptr; + unsigned char pattern; + int i; + + + /* Init cursor content + Cursor size is 64x64 pixels + Start of the cursor memory depends on panel type (dual panel ...) */ + if ((i = readByte (LCD_CURSOR_START)) == 0) { + ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE); + } + else { + ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192)); + } + + /* Fill the first line and the first empty line after cursor */ + for (i = 0, pattern = 0; i < 64; i++) { + if (i < font_width) { + /* Invert background */ + pattern |= 0x3; + + } + else { + /* Background */ + pattern |= 0x2; + } + if ((i & 3) == 3) { + *ptr = pattern; + *(ptr + font_height * 16) = 0xaa; + ptr ++; + pattern = 0; + } + pattern <<= 2; + } + + /* Duplicate this line */ + for (i = 1; i < font_height; i++) { + memcpy ((void *)ptr, (void *)(ptr - 16), 16); + ptr += 16; + } + + for (; i < 64; i++) { + memcpy ((void *)(ptr + 16), (void *)ptr, 16); + ptr += 16; + } + + /* Select cursor mode */ + writeByte (LCD_CURSOR_CNTL, 1); +} +#endif +#endif |