diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/nand/fsl_elbc_nand.c | 56 |
1 files changed, 50 insertions, 6 deletions
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 674c542..4351824 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -95,7 +95,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = { .eccbytes = 3, .eccpos = {6, 7, 8}, .oobfree = { {0, 5}, {9, 7} }, - .oobavail = 12, }; /* Small Page FLASH with FMR[ECCM] = 1 */ @@ -103,7 +102,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = { .eccbytes = 3, .eccpos = {8, 9, 10}, .oobfree = { {0, 5}, {6, 2}, {11, 5} }, - .oobavail = 12, }; /* Large Page FLASH with FMR[ECCM] = 0 */ @@ -111,7 +109,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = { .eccbytes = 12, .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56}, .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} }, - .oobavail = 48, }; /* Large Page FLASH with FMR[ECCM] = 1 */ @@ -119,7 +116,48 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = { .eccbytes = 12, .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58}, .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} }, - .oobavail = 48, +}; + +/* + * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset + * 1, so we have to adjust bad block pattern. This pattern should be used for + * x8 chips only. So far hardware does not support x16 chips anyway. + */ +static u8 scan_ff_pattern[] = { 0xff, }; + +static struct nand_bbt_descr largepage_memorybased = { + .options = 0, + .offs = 0, + .len = 1, + .pattern = scan_ff_pattern, +}; + +/* + * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt, + * interfere with ECC positions, that's why we implement our own descriptors. + * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0. + */ +static u8 bbt_pattern[] = {'B', 'b', 't', '0' }; +static u8 mirror_pattern[] = {'1', 't', 'b', 'B' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | + NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 11, + .len = 4, + .veroffs = 15, + .maxblocks = 4, + .pattern = bbt_pattern, +}; + +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | + NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 11, + .len = 4, + .veroffs = 15, + .maxblocks = 4, + .pattern = mirror_pattern, }; /*=================================*/ @@ -724,7 +762,12 @@ int board_nand_init(struct nand_chip *nand) nand->waitfunc = fsl_elbc_wait; /* set up nand options */ - nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; + nand->bbt_td = &bbt_main_descr; + nand->bbt_md = &bbt_mirror_descr; + + /* set up nand options */ + nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR | + NAND_USE_FLASH_BBT; nand->controller = &elbc_ctrl->controller; nand->priv = priv; @@ -750,9 +793,10 @@ int board_nand_init(struct nand_chip *nand) priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT); - /* adjust Option Register and ECC to match Flash page size */ + /* Large-page-specific setup */ if (or & OR_FCM_PGS) { priv->page_size = 1; + nand->badblock_pattern = &largepage_memorybased; /* adjust ecc setup if needed */ if ((br & BR_DECC) == BR_DECC_CHK_GEN) { |