diff options
Diffstat (limited to 'drivers/video/sunxi_display.c')
| -rw-r--r-- | drivers/video/sunxi_display.c | 134 |
1 files changed, 130 insertions, 4 deletions
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c index 0505f3c..a6e3778 100644 --- a/drivers/video/sunxi_display.c +++ b/drivers/video/sunxi_display.c @@ -271,6 +271,114 @@ static int sunxi_hdmi_edid_get_mode(struct ctfb_res_modes *mode) #endif /* CONFIG_VIDEO_HDMI */ +#ifdef CONFIG_MACH_SUN4I +/* + * Testing has shown that on sun4i the display backend engine does not have + * deep enough fifo-s causing flickering / tearing in full-hd mode due to + * fifo underruns. So on sun4i we use the display frontend engine to do the + * dma from memory, as the frontend does have deep enough fifo-s. + */ + +static const u32 sun4i_vert_coef[32] = { + 0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd, + 0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb, + 0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb, + 0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc, + 0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd, + 0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff, + 0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff, + 0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100, +}; + +static const u32 sun4i_horz_coef[64] = { + 0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03, + 0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06, + 0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09, + 0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f, + 0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12, + 0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18, + 0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e, + 0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23, + 0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29, + 0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e, + 0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33, + 0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37, + 0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b, + 0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e, + 0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40, + 0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42, +}; + +static void sunxi_frontend_init(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_de_fe_reg * const de_fe = + (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; + int i; + + /* Clocks on */ + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_FE0); + setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_FE0); + clock_set_de_mod_clock(&ccm->fe0_clk_cfg, 300000000); + + setbits_le32(&de_fe->enable, SUNXI_DE_FE_ENABLE_EN); + + for (i = 0; i < 32; i++) { + writel(sun4i_horz_coef[2 * i], &de_fe->ch0_horzcoef0[i]); + writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch0_horzcoef1[i]); + writel(sun4i_vert_coef[i], &de_fe->ch0_vertcoef[i]); + writel(sun4i_horz_coef[2 * i], &de_fe->ch1_horzcoef0[i]); + writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch1_horzcoef1[i]); + writel(sun4i_vert_coef[i], &de_fe->ch1_vertcoef[i]); + } + + setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_COEF_RDY); +} + +static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode, + unsigned int address) +{ + struct sunxi_de_fe_reg * const de_fe = + (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; + + setbits_le32(&de_fe->bypass, SUNXI_DE_FE_BYPASS_CSC_BYPASS); + writel(CONFIG_SYS_SDRAM_BASE + address, &de_fe->ch0_addr); + writel(mode->xres * 4, &de_fe->ch0_stride); + writel(SUNXI_DE_FE_INPUT_FMT_ARGB8888, &de_fe->input_fmt); + writel(SUNXI_DE_FE_OUTPUT_FMT_ARGB8888, &de_fe->output_fmt); + + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch0_insize); + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch0_outsize); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_horzfact); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_vertfact); + + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch1_insize); + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch1_outsize); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_horzfact); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_vertfact); + + setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_REG_RDY); +} + +static void sunxi_frontend_enable(void) +{ + struct sunxi_de_fe_reg * const de_fe = + (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; + + setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_FRM_START); +} +#else +static void sunxi_frontend_init(void) {} +static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode, + unsigned int address) {} +static void sunxi_frontend_enable(void) {} +#endif + /* * This is the entity that mixes and matches the different layers and inputs. * Allwinner calls it the back-end, but i like composer better. @@ -283,6 +391,8 @@ static void sunxi_composer_init(void) (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; int i; + sunxi_frontend_init(); + #if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I /* Reset off */ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0); @@ -290,7 +400,9 @@ static void sunxi_composer_init(void) /* Clocks on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0); +#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */ setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0); +#endif clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000); /* Engine bug, clear registers after reset */ @@ -306,13 +418,19 @@ static void sunxi_composer_mode_set(const struct ctfb_res_modes *mode, struct sunxi_de_be_reg * const de_be = (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + sunxi_frontend_mode_set(mode, address); + writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), &de_be->disp_size); writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), &de_be->layer0_size); +#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */ writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride); writel(address << 3, &de_be->layer0_addr_low32b); writel(address >> 29, &de_be->layer0_addr_high4b); +#else + writel(SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0, &de_be->layer0_attr0_ctrl); +#endif writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl); setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE); @@ -323,6 +441,8 @@ static void sunxi_composer_enable(void) struct sunxi_de_be_reg * const de_be = (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + sunxi_frontend_enable(); + setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS); setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); } @@ -1060,21 +1180,27 @@ int sunxi_simplefb_setup(void *blob) int offset, ret; const char *pipeline = NULL; +#ifdef CONFIG_MACH_SUN4I +#define PIPELINE_PREFIX "de_fe0-" +#else +#define PIPELINE_PREFIX +#endif + switch (sunxi_display.monitor) { case sunxi_monitor_none: return 0; case sunxi_monitor_dvi: case sunxi_monitor_hdmi: - pipeline = "de_be0-lcd0-hdmi"; + pipeline = PIPELINE_PREFIX "de_be0-lcd0-hdmi"; break; case sunxi_monitor_lcd: - pipeline = "de_be0-lcd0"; + pipeline = PIPELINE_PREFIX "de_be0-lcd0"; break; case sunxi_monitor_vga: #ifdef CONFIG_VIDEO_VGA - pipeline = "de_be0-lcd0-tve0"; + pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0"; #elif defined CONFIG_VIDEO_VGA_VIA_LCD - pipeline = "de_be0-lcd0"; + pipeline = PIPELINE_PREFIX "de_be0-lcd0"; #endif break; } |