summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/eth/smsc95xx.c1
-rw-r--r--drivers/usb/gadget/f_dfu.c2
-rw-r--r--drivers/usb/gadget/f_mass_storage.c30
-rw-r--r--drivers/usb/gadget/g_dnl.c17
-rw-r--r--drivers/usb/gadget/gadget_chips.h2
-rw-r--r--drivers/usb/gadget/mv_udc.c401
-rw-r--r--drivers/usb/host/ehci-hcd.c15
-rw-r--r--drivers/usb/host/ehci-mx5.c15
-rw-r--r--drivers/usb/host/ehci-omap.c60
-rw-r--r--drivers/usb/host/ehci.h13
10 files changed, 399 insertions, 157 deletions
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index b04e91c..15fd9a9 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -784,6 +784,7 @@ static const struct smsc95xx_dongle smsc95xx_dongles[] = {
{ 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */
{ 0x0424, 0x9500 }, /* LAN9500 Ethernet */
{ 0x0424, 0x9730 }, /* LAN9730 Ethernet (HSIC) */
+ { 0x0424, 0x9900 }, /* SMSC9500 USB Ethernet Device (SAL10) */
{ 0x0000, 0x0000 } /* END - Do not remove */
};
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index 5321a68..37d04a1 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -312,6 +312,8 @@ static int state_dfu_idle(struct f_dfu *f_dfu,
DFU_STATE_dfuMANIFEST_WAIT_RST;
to_runtime_mode(f_dfu);
f_dfu->dfu_state = DFU_STATE_appIDLE;
+
+ dfu_trigger_reset();
break;
default:
f_dfu->dfu_state = DFU_STATE_dfuERROR;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 5b348d7..b34068a 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -6,35 +6,7 @@
* Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
* All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index cbfcb2d..a3e05a8 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -31,8 +31,10 @@
#define STRING_MANUFACTURER 25
#define STRING_PRODUCT 2
+/* Index of String Descriptor describing this configuration */
#define STRING_USBDOWN 2
-#define CONFIG_USBDOWNLOADER 2
+/* Number of supported configurations */
+#define CONFIGURATION_NUMBER 1
#define DRIVER_VERSION "usb_dnl 2.0"
@@ -54,11 +56,14 @@ static struct usb_device_descriptor device_desc = {
.bNumConfigurations = 1,
};
-/* static strings, in UTF-8 */
+/*
+ * static strings, in UTF-8
+ * IDs for those strings are assigned dynamically at g_dnl_bind()
+ */
static struct usb_string g_dnl_string_defs[] = {
- { 0, manufacturer, },
- { 1, product, },
- { } /* end of list */
+ {.s = manufacturer},
+ {.s = product},
+ { } /* end of list */
};
static struct usb_gadget_strings g_dnl_string_tab = {
@@ -104,7 +109,7 @@ static int g_dnl_config_register(struct usb_composite_dev *cdev)
static struct usb_configuration config = {
.label = "usb_dnload",
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bConfigurationValue = CONFIG_USBDOWNLOADER,
+ .bConfigurationValue = CONFIGURATION_NUMBER,
.iConfiguration = STRING_USBDOWN,
.bind = g_dnl_do_config,
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f038747..aa54b85 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -144,7 +144,7 @@
#define gadget_is_m66592(g) 0
#endif
-#ifdef CONFIG_USB_GADGET_MV
+#ifdef CONFIG_MV_UDC
#define gadget_is_mv(g) (!strcmp("mv_udc", (g)->name))
#else
#define gadget_is_mv(g) 0
diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/mv_udc.c
index 7fa5288..7574e31 100644
--- a/drivers/usb/gadget/mv_udc.c
+++ b/drivers/usb/gadget/mv_udc.c
@@ -17,6 +17,20 @@
#include <linux/types.h>
#include <usb/mv_udc.h>
+#if CONFIG_USB_MAX_CONTROLLER_COUNT > 1
+#error This driver only supports one single controller.
+#endif
+
+/*
+ * Check if the system has too long cachelines. If the cachelines are
+ * longer then 128b, the driver will not be able flush/invalidate data
+ * cache over separate QH entries. We use 128b because one QH entry is
+ * 64b long and there are always two QH list entries for each endpoint.
+ */
+#if ARCH_DMA_MINALIGN > 128
+#error This driver can not work on systems with caches longer than 128b
+#endif
+
#ifndef DEBUG
#define DBG(x...) do {} while (0)
#else
@@ -39,8 +53,6 @@ static const char *reqname(unsigned r)
}
#endif
-#define PAGE_SIZE 4096
-#define QH_MAXNUM 32
static struct usb_endpoint_descriptor ep0_out_desc = {
.bLength = sizeof(struct usb_endpoint_descriptor),
.bDescriptorType = USB_DT_ENDPOINT,
@@ -55,8 +67,6 @@ static struct usb_endpoint_descriptor ep0_in_desc = {
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
};
-struct ept_queue_head *epts;
-struct ept_queue_item *items[2 * NUM_ENDPOINTS];
static int mv_pullup(struct usb_gadget *gadget, int is_on);
static int mv_ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc);
@@ -79,14 +89,115 @@ static struct usb_ep_ops mv_ep_ops = {
.free_request = mv_ep_free_request,
};
-static struct mv_ep ep[2 * NUM_ENDPOINTS];
+/* Init values for USB endpoints. */
+static const struct usb_ep mv_ep_init[2] = {
+ [0] = { /* EP 0 */
+ .maxpacket = 64,
+ .name = "ep0",
+ .ops = &mv_ep_ops,
+ },
+ [1] = { /* EP 1..n */
+ .maxpacket = 512,
+ .name = "ep-",
+ .ops = &mv_ep_ops,
+ },
+};
+
static struct mv_drv controller = {
- .gadget = {
- .ep0 = &ep[0].ep,
- .name = "mv_udc",
+ .gadget = {
+ .name = "mv_udc",
+ .ops = &mv_udc_ops,
},
};
+/**
+ * mv_get_qh() - return queue head for endpoint
+ * @ep_num: Endpoint number
+ * @dir_in: Direction of the endpoint (IN = 1, OUT = 0)
+ *
+ * This function returns the QH associated with particular endpoint
+ * and it's direction.
+ */
+static struct ept_queue_head *mv_get_qh(int ep_num, int dir_in)
+{
+ return &controller.epts[(ep_num * 2) + dir_in];
+}
+
+/**
+ * mv_get_qtd() - return queue item for endpoint
+ * @ep_num: Endpoint number
+ * @dir_in: Direction of the endpoint (IN = 1, OUT = 0)
+ *
+ * This function returns the QH associated with particular endpoint
+ * and it's direction.
+ */
+static struct ept_queue_item *mv_get_qtd(int ep_num, int dir_in)
+{
+ return controller.items[(ep_num * 2) + dir_in];
+}
+
+/**
+ * mv_flush_qh - flush cache over queue head
+ * @ep_num: Endpoint number
+ *
+ * This function flushes cache over QH for particular endpoint.
+ */
+static void mv_flush_qh(int ep_num)
+{
+ struct ept_queue_head *head = mv_get_qh(ep_num, 0);
+ const uint32_t start = (uint32_t)head;
+ const uint32_t end = start + 2 * sizeof(*head);
+
+ flush_dcache_range(start, end);
+}
+
+/**
+ * mv_invalidate_qh - invalidate cache over queue head
+ * @ep_num: Endpoint number
+ *
+ * This function invalidates cache over QH for particular endpoint.
+ */
+static void mv_invalidate_qh(int ep_num)
+{
+ struct ept_queue_head *head = mv_get_qh(ep_num, 0);
+ uint32_t start = (uint32_t)head;
+ uint32_t end = start + 2 * sizeof(*head);
+
+ invalidate_dcache_range(start, end);
+}
+
+/**
+ * mv_flush_qtd - flush cache over queue item
+ * @ep_num: Endpoint number
+ *
+ * This function flushes cache over qTD pair for particular endpoint.
+ */
+static void mv_flush_qtd(int ep_num)
+{
+ struct ept_queue_item *item = mv_get_qtd(ep_num, 0);
+ const uint32_t start = (uint32_t)item;
+ const uint32_t end_raw = start + 2 * sizeof(*item);
+ const uint32_t end = roundup(end_raw, ARCH_DMA_MINALIGN);
+
+ flush_dcache_range(start, end);
+}
+
+/**
+ * mv_invalidate_qtd - invalidate cache over queue item
+ * @ep_num: Endpoint number
+ *
+ * This function invalidates cache over qTD pair for particular endpoint.
+ */
+static void mv_invalidate_qtd(int ep_num)
+{
+ struct ept_queue_item *item = mv_get_qtd(ep_num, 0);
+ const uint32_t start = (uint32_t)item;
+ const uint32_t end_raw = start + 2 * sizeof(*item);
+ const uint32_t end = roundup(end_raw, ARCH_DMA_MINALIGN);
+
+ invalidate_dcache_range(start, end);
+}
+
static struct usb_request *
mv_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags)
{
@@ -102,9 +213,9 @@ static void mv_ep_free_request(struct usb_ep *ep, struct usb_request *_req)
static void ep_enable(int num, int in)
{
struct ept_queue_head *head;
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
unsigned n;
- head = epts + 2*num + in;
+ head = mv_get_qh(num, in);
n = readl(&udc->epctrl[num]);
if (in)
@@ -112,8 +223,10 @@ static void ep_enable(int num, int in)
else
n |= (CTRL_RXE | CTRL_RXR | CTRL_RXT_BULK);
- if (num != 0)
+ if (num != 0) {
head->config = CONFIG_MAX_PKT(EP_MAX_PACKET_SIZE) | CONFIG_ZLT;
+ mv_flush_qh(num);
+ }
writel(n, &udc->epctrl[num]);
}
@@ -134,40 +247,108 @@ static int mv_ep_disable(struct usb_ep *ep)
return 0;
}
+static int mv_bounce(struct mv_ep *ep)
+{
+ uint32_t addr = (uint32_t)ep->req.buf;
+ uint32_t ba;
+
+ /* Input buffer address is not aligned. */
+ if (addr & (ARCH_DMA_MINALIGN - 1))
+ goto align;
+
+ /* Input buffer length is not aligned. */
+ if (ep->req.length & (ARCH_DMA_MINALIGN - 1))
+ goto align;
+
+ /* The buffer is well aligned, only flush cache. */
+ ep->b_len = ep->req.length;
+ ep->b_buf = ep->req.buf;
+ goto flush;
+
+align:
+ /* Use internal buffer for small payloads. */
+ if (ep->req.length <= 64) {
+ ep->b_len = 64;
+ ep->b_buf = ep->b_fast;
+ } else {
+ ep->b_len = roundup(ep->req.length, ARCH_DMA_MINALIGN);
+ ep->b_buf = memalign(ARCH_DMA_MINALIGN, ep->b_len);
+ if (!ep->b_buf)
+ return -ENOMEM;
+ }
+
+ memcpy(ep->b_buf, ep->req.buf, ep->req.length);
+
+flush:
+ ba = (uint32_t)ep->b_buf;
+ flush_dcache_range(ba, ba + ep->b_len);
+
+ return 0;
+}
+
+static void mv_debounce(struct mv_ep *ep)
+{
+ uint32_t addr = (uint32_t)ep->req.buf;
+ uint32_t ba = (uint32_t)ep->b_buf;
+
+ invalidate_dcache_range(ba, ba + ep->b_len);
+
+ /* Input buffer address is not aligned. */
+ if (addr & (ARCH_DMA_MINALIGN - 1))
+ goto copy;
+
+ /* Input buffer length is not aligned. */
+ if (ep->req.length & (ARCH_DMA_MINALIGN - 1))
+ goto copy;
+
+ /* The buffer is well aligned, only invalidate cache. */
+ return;
+
+copy:
+ memcpy(ep->req.buf, ep->b_buf, ep->req.length);
+
+ /* Large payloads use allocated buffer, free it. */
+ if (ep->req.length > 64)
+ free(ep->b_buf);
+}
+
static int mv_ep_queue(struct usb_ep *ep,
struct usb_request *req, gfp_t gfp_flags)
{
struct mv_ep *mv_ep = container_of(ep, struct mv_ep, ep);
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
struct ept_queue_item *item;
struct ept_queue_head *head;
- unsigned phys;
- int bit, num, len, in;
+ int bit, num, len, in, ret;
num = mv_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
in = (mv_ep->desc->bEndpointAddress & USB_DIR_IN) != 0;
- item = items[2 * num + in];
- head = epts + 2 * num + in;
- phys = (unsigned)req->buf;
+ item = mv_get_qtd(num, in);
+ head = mv_get_qh(num, in);
len = req->length;
+ ret = mv_bounce(mv_ep);
+ if (ret)
+ return ret;
+
item->next = TERMINATE;
item->info = INFO_BYTES(len) | INFO_IOC | INFO_ACTIVE;
- item->page0 = phys;
- item->page1 = (phys & 0xfffff000) + 0x1000;
+ item->page0 = (uint32_t)mv_ep->b_buf;
+ item->page1 = ((uint32_t)mv_ep->b_buf & 0xfffff000) + 0x1000;
head->next = (unsigned) item;
head->info = 0;
- DBG("ept%d %s queue len %x, buffer %x\n",
- num, in ? "in" : "out", len, phys);
+ DBG("ept%d %s queue len %x, buffer %p\n",
+ num, in ? "in" : "out", len, mv_ep->b_buf);
if (in)
bit = EPT_TX(num);
else
bit = EPT_RX(num);
- flush_cache(phys, len);
- flush_cache((unsigned long)item, sizeof(struct ept_queue_item));
+ mv_flush_qh(num);
+ mv_flush_qtd(num);
+
writel(bit, &udc->epprime);
return 0;
@@ -181,13 +362,17 @@ static void handle_ep_complete(struct mv_ep *ep)
in = (ep->desc->bEndpointAddress & USB_DIR_IN) != 0;
if (num == 0)
ep->desc = &ep0_out_desc;
- item = items[2 * num + in];
-
+ item = mv_get_qtd(num, in);
+ mv_invalidate_qtd(num);
+
if (item->info & 0xff)
printf("EP%d/%s FAIL nfo=%x pg0=%x\n",
num, in ? "in" : "out", item->info, item->page0);
len = (item->info >> 16) & 0x7fff;
+
+ mv_debounce(ep);
+
ep->req.length -= len;
DBG("ept%d %s complete %x\n",
num, in ? "in" : "out", len);
@@ -203,16 +388,16 @@ static void handle_ep_complete(struct mv_ep *ep)
static void handle_setup(void)
{
- struct usb_request *req = &ep[0].req;
- struct mv_udc *udc = controller.udc;
+ struct usb_request *req = &controller.ep[0].req;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
struct ept_queue_head *head;
struct usb_ctrlrequest r;
int status = 0;
int num, in, _num, _in, i;
char *buf;
- head = epts;
+ head = mv_get_qh(0, 0); /* EP0 OUT */
- flush_cache((unsigned long)head, sizeof(struct ept_queue_head));
+ mv_invalidate_qh(0);
memcpy(&r, head->setup_data, sizeof(struct usb_ctrlrequest));
writel(EPT_RX(0), &udc->epstat);
DBG("handle setup %s, %x, %x index %x value %x\n", reqname(r.bRequest),
@@ -226,11 +411,11 @@ static void handle_setup(void)
if ((r.wValue == 0) && (r.wLength == 0)) {
req->length = 0;
for (i = 0; i < NUM_ENDPOINTS; i++) {
- if (!ep[i].desc)
+ if (!controller.ep[i].desc)
continue;
- num = ep[i].desc->bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK;
- in = (ep[i].desc->bEndpointAddress
+ num = controller.ep[i].desc->bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK;
+ in = (controller.ep[i].desc->bEndpointAddress
& USB_DIR_IN) != 0;
if ((num == _num) && (in == _in)) {
ep_enable(num, in);
@@ -277,7 +462,7 @@ static void stop_activity(void)
{
int i, num, in;
struct ept_queue_head *head;
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
writel(readl(&udc->epcomp), &udc->epcomp);
writel(readl(&udc->epstat), &udc->epstat);
writel(0xffffffff, &udc->epflush);
@@ -286,19 +471,21 @@ static void stop_activity(void)
for (i = 0; i < NUM_ENDPOINTS; i++) {
if (i != 0)
writel(0, &udc->epctrl[i]);
- if (ep[i].desc) {
- num = ep[i].desc->bEndpointAddress
+ if (controller.ep[i].desc) {
+ num = controller.ep[i].desc->bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK;
- in = (ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0;
- head = epts + (num * 2) + (in);
+ in = (controller.ep[i].desc->bEndpointAddress
+ & USB_DIR_IN) != 0;
+ head = mv_get_qh(num, in);
head->info = INFO_ACTIVE;
+ mv_flush_qh(num);
}
}
}
void udc_irq(void)
{
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
unsigned n = readl(&udc->usbsts);
writel(n, &udc->usbsts);
int bit, i, num, in;
@@ -320,8 +507,8 @@ void udc_irq(void)
if (bit == 2) {
controller.gadget.speed = USB_SPEED_HIGH;
for (i = 1; i < NUM_ENDPOINTS && n; i++)
- if (ep[i].desc)
- ep[i].ep.maxpacket = 512;
+ if (controller.ep[i].desc)
+ controller.ep[i].ep.maxpacket = 512;
} else {
controller.gadget.speed = USB_SPEED_FULL;
}
@@ -340,14 +527,14 @@ void udc_irq(void)
writel(n, &udc->epcomp);
for (i = 0; i < NUM_ENDPOINTS && n; i++) {
- if (ep[i].desc) {
- num = ep[i].desc->bEndpointAddress
+ if (controller.ep[i].desc) {
+ num = controller.ep[i].desc->bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK;
- in = (ep[i].desc->bEndpointAddress
+ in = (controller.ep[i].desc->bEndpointAddress
& USB_DIR_IN) != 0;
bit = (in) ? EPT_TX(num) : EPT_RX(num);
if (n & bit)
- handle_ep_complete(&ep[i]);
+ handle_ep_complete(&controller.ep[i]);
}
}
}
@@ -356,7 +543,7 @@ void udc_irq(void)
int usb_gadget_handle_interrupts(void)
{
u32 value;
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
value = readl(&udc->usbsts);
if (value)
@@ -367,13 +554,13 @@ int usb_gadget_handle_interrupts(void)
static int mv_pullup(struct usb_gadget *gadget, int is_on)
{
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
if (is_on) {
/* RESET */
writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd);
udelay(200);
- writel((unsigned) epts, &udc->epinitaddr);
+ writel((unsigned)controller.epts, &udc->epinitaddr);
/* select DEVICE mode */
writel(USBMODE_DEVICE, &udc->usbmode);
@@ -395,7 +582,7 @@ static int mv_pullup(struct usb_gadget *gadget, int is_on)
void udc_disconnect(void)
{
- struct mv_udc *udc = controller.udc;
+ struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor;
/* disable pullup */
stop_activity();
writel(USBCMD_FS2, &udc->usbcmd);
@@ -407,18 +594,48 @@ void udc_disconnect(void)
static int mvudc_probe(void)
{
struct ept_queue_head *head;
+ uint8_t *imem;
int i;
- controller.gadget.ops = &mv_udc_ops;
- controller.udc = (struct mv_udc *)CONFIG_USB_REG_BASE;
- epts = memalign(PAGE_SIZE, QH_MAXNUM * sizeof(struct ept_queue_head));
- memset(epts, 0, QH_MAXNUM * sizeof(struct ept_queue_head));
+ const int num = 2 * NUM_ENDPOINTS;
+
+ const int eplist_min_align = 4096;
+ const int eplist_align = roundup(eplist_min_align, ARCH_DMA_MINALIGN);
+ const int eplist_raw_sz = num * sizeof(struct ept_queue_head);
+ const int eplist_sz = roundup(eplist_raw_sz, ARCH_DMA_MINALIGN);
+
+ const int ilist_align = roundup(ARCH_DMA_MINALIGN, 32);
+ const int ilist_ent_raw_sz = 2 * sizeof(struct ept_queue_item);
+ const int ilist_ent_sz = roundup(ilist_ent_raw_sz, ARCH_DMA_MINALIGN);
+ const int ilist_sz = NUM_ENDPOINTS * ilist_ent_sz;
+
+ /* The QH list must be aligned to 4096 bytes. */
+ controller.epts = memalign(eplist_align, eplist_sz);
+ if (!controller.epts)
+ return -ENOMEM;
+ memset(controller.epts, 0, eplist_sz);
+
+ /*
+ * Each qTD item must be 32-byte aligned, each qTD touple must be
+ * cacheline aligned. There are two qTD items for each endpoint and
+ * only one of them is used for the endpoint at time, so we can group
+ * them together.
+ */
+ controller.items_mem = memalign(ilist_align, ilist_sz);
+ if (!controller.items_mem) {
+ free(controller.epts);
+ return -ENOMEM;
+ }
+
for (i = 0; i < 2 * NUM_ENDPOINTS; i++) {
/*
- * For item0 and item1, they are served as ep0
- * out&in seperately
+ * Configure QH for each endpoint. The structure of the QH list
+ * is such that each two subsequent fields, N and N+1 where N is
+ * even, in the QH list represent QH for one endpoint. The Nth
+ * entry represents OUT configuration and the N+1th entry does
+ * represent IN configuration of the endpoint.
*/
- head = epts + i;
+ head = controller.epts + i;
if (i < 2)
head->config = CONFIG_MAX_PKT(EP0_MAX_PACKET_SIZE)
| CONFIG_ZLT | CONFIG_IOS;
@@ -428,49 +645,65 @@ static int mvudc_probe(void)
head->next = TERMINATE;
head->info = 0;
- items[i] = memalign(PAGE_SIZE, sizeof(struct ept_queue_item));
+ imem = controller.items_mem + ((i >> 1) * ilist_ent_sz);
+ if (i & 1)
+ imem += sizeof(struct ept_queue_item);
+
+ controller.items[i] = (struct ept_queue_item *)imem;
+
+ if (i & 1) {
+ mv_flush_qh(i - 1);
+ mv_flush_qtd(i - 1);
+ }
}
INIT_LIST_HEAD(&controller.gadget.ep_list);
- ep[0].ep.maxpacket = 64;
- ep[0].ep.name = "ep0";
- ep[0].desc = &ep0_in_desc;
+
+ /* Init EP 0 */
+ memcpy(&controller.ep[0].ep, &mv_ep_init[0], sizeof(*mv_ep_init));
+ controller.ep[0].desc = &ep0_in_desc;
+ controller.gadget.ep0 = &controller.ep[0].ep;
INIT_LIST_HEAD(&controller.gadget.ep0->ep_list);
- for (i = 0; i < 2 * NUM_ENDPOINTS; i++) {
- if (i != 0) {
- ep[i].ep.maxpacket = 512;
- ep[i].ep.name = "ep-";
- list_add_tail(&ep[i].ep.ep_list,
- &controller.gadget.ep_list);
- ep[i].desc = NULL;
- }
- ep[i].ep.ops = &mv_ep_ops;
+
+ /* Init EP 1..n */
+ for (i = 1; i < NUM_ENDPOINTS; i++) {
+ memcpy(&controller.ep[i].ep, &mv_ep_init[1],
+ sizeof(*mv_ep_init));
+ list_add_tail(&controller.ep[i].ep.ep_list,
+ &controller.gadget.ep_list);
}
+
return 0;
}
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
- struct mv_udc *udc = controller.udc;
- int retval;
-
- if (!driver
- || driver->speed < USB_SPEED_FULL
- || !driver->bind
- || !driver->setup) {
- DBG("bad parameter.\n");
+ struct mv_udc *udc;
+ int ret;
+
+ if (!driver)
return -EINVAL;
- }
+ if (!driver->bind || !driver->setup || !driver->disconnect)
+ return -EINVAL;
+ if (driver->speed != USB_SPEED_FULL && driver->speed != USB_SPEED_HIGH)
+ return -EINVAL;
+
+ ret = usb_lowlevel_init(0, (void **)&controller.ctrl);
+ if (ret)
+ return ret;
+
+ ret = mvudc_probe();
+ if (!ret) {
+ udc = (struct mv_udc *)controller.ctrl->hcor;
- if (!mvudc_probe()) {
- usb_lowlevel_init();
/* select ULPI phy */
writel(PTS(PTS_ENABLE) | PFSC, &udc->portsc);
}
- retval = driver->bind(&controller.gadget);
- if (retval) {
- DBG("driver->bind() returned %d\n", retval);
- return retval;
+
+ ret = driver->bind(&controller.gadget);
+ if (ret) {
+ DBG("driver->bind() returned %d\n", ret);
+ return ret;
}
controller.driver = driver;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 706cf0c..fdad739 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -36,16 +36,7 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif
-static struct ehci_ctrl {
- struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
- struct ehci_hcor *hcor;
- int rootdev;
- uint16_t portreset;
- struct QH qh_list __aligned(USB_DMA_MINALIGN);
- struct QH periodic_queue __aligned(USB_DMA_MINALIGN);
- uint32_t *periodic_list;
- int ntds;
-} ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
+static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
#define ALIGN_END_ADDR(type, ptr, size) \
((uint32_t)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN))
@@ -954,7 +945,9 @@ int usb_lowlevel_init(int index, void **controller)
* Split Transactions will be spread across microframes using
* S-mask and C-mask.
*/
- ehcic[index].periodic_list = memalign(4096, 1024*4);
+ if (ehcic[index].periodic_list == NULL)
+ ehcic[index].periodic_list = memalign(4096, 1024 * 4);
+
if (!ehcic[index].periodic_list)
return -ENOMEM;
for (i = 0; i < 1024; i++) {
diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index 3548620..dd11f53 100644
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -221,21 +221,12 @@ void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct usb_ehci *ehci;
-#ifdef CONFIG_MX53
- struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR;
- u32 reg;
-
- reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26);
- /* derive USB PHY clock multiplexer from PLL3 */
- reg |= 1 << 26;
- __raw_writel(reg, &sc_regs->cscmr1);
-#endif
set_usboh3_clk();
- enable_usboh3_clk(1);
+ enable_usboh3_clk(true);
set_usb_phy_clk();
- enable_usb_phy1_clk(1);
- enable_usb_phy2_clk(1);
+ enable_usb_phy1_clk(true);
+ enable_usb_phy2_clk(true);
mdelay(1);
/* Do board specific initialization */
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index a47e078..3c58f9e 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -28,18 +28,21 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE;
static int omap_uhh_reset(void)
{
- unsigned long init = get_timer(0);
-
- /* perform UHH soft reset, and wait until reset is complete */
- writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
-
- /* Wait for UHH reset to complete */
- while (!(readl(&uhh->syss) & OMAP_UHH_SYSSTATUS_EHCI_RESETDONE))
- if (get_timer(init) > CONFIG_SYS_HZ) {
- debug("OMAP UHH error: timeout resetting ehci\n");
- return -EL3RST;
- }
-
+/*
+ * Soft resetting the UHH module causes instability issues on
+ * all OMAPs so we just avoid it.
+ *
+ * See OMAP36xx Errata
+ * i571: USB host EHCI may stall when entering smart-standby mode
+ * i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ *
+ * On OMAP4/5, soft-resetting the UHH module will put it into
+ * Smart-Idle mode and lead to a deadlock.
+ *
+ * On OMAP3, this doesn't seem to be the case but still instabilities
+ * are observed on beagle (3530 ES1.0) if soft-reset is used.
+ * e.g. NFS root failures with Linux kernel.
+ */
return 0;
}
@@ -76,6 +79,7 @@ static void omap_usbhs_hsic_init(int port)
writel(reg, &usbtll->channel_conf + port);
}
+#ifdef CONFIG_USB_ULPI
static void omap_ehci_soft_phy_reset(int port)
{
struct ulpi_viewport ulpi_vp;
@@ -85,6 +89,12 @@ static void omap_ehci_soft_phy_reset(int port)
ulpi_reset(&ulpi_vp);
}
+#else
+static void omap_ehci_soft_phy_reset(int port)
+{
+ return;
+}
+#endif
inline int __board_usb_init(void)
{
@@ -93,7 +103,8 @@ inline int __board_usb_init(void)
int board_usb_init(void) __attribute__((weak, alias("__board_usb_init")));
#if defined(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO) || \
- defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO)
+ defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO) || \
+ defined(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO)
/* controls PHY(s) reset signal(s) */
static inline void omap_ehci_phy_reset(int on, int delay)
{
@@ -112,6 +123,10 @@ static inline void omap_ehci_phy_reset(int on, int delay)
gpio_request(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, "USB PHY2 reset");
gpio_direction_output(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, !on);
#endif
+#ifdef CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
+ gpio_request(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, "USB PHY3 reset");
+ gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, !on);
+#endif
/* Hold the PHY in RESET for enough time till DIR is high */
/* Refer: ISSUE1 */
@@ -195,10 +210,27 @@ int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata,
else
setbits_le32(&reg, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS);
} else if (rev == OMAP_USBHS_REV2) {
+
clrsetbits_le32(&reg, (OMAP_P1_MODE_CLEAR | OMAP_P2_MODE_CLEAR),
OMAP4_UHH_HOSTCONFIG_APP_START_CLK);
- /* Clear port mode fields for PHY mode*/
+ /* Clear port mode fields for PHY mode */
+
+ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0]))
+ setbits_le32(&reg, OMAP_P1_MODE_HSIC);
+
+ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[1]))
+ setbits_le32(&reg, OMAP_P2_MODE_HSIC);
+
+ } else if (rev == OMAP_USBHS_REV2_1) {
+
+ clrsetbits_le32(&reg,
+ (OMAP_P1_MODE_CLEAR |
+ OMAP_P2_MODE_CLEAR |
+ OMAP_P3_MODE_CLEAR),
+ OMAP4_UHH_HOSTCONFIG_APP_START_CLK);
+
+ /* Clear port mode fields for PHY mode */
if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0]))
setbits_le32(&reg, OMAP_P1_MODE_HSIC);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index d090f0a..bd52afe 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -22,6 +22,8 @@
#ifndef USB_EHCI_H
#define USB_EHCI_H
+#include <usb.h>
+
#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#endif
@@ -252,6 +254,17 @@ struct QH {
};
};
+struct ehci_ctrl {
+ struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
+ struct ehci_hcor *hcor;
+ int rootdev;
+ uint16_t portreset;
+ struct QH qh_list __aligned(USB_DMA_MINALIGN);
+ struct QH periodic_queue __aligned(USB_DMA_MINALIGN);
+ uint32_t *periodic_list;
+ int ntds;
+};
+
/* Low level init functions */
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor);
int ehci_hcd_stop(int index);
generated by cgit v1.1 at 2024-11-14 04:48:41 +0000