diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/gadget/designware_udc.c | 59 |
1 files changed, 38 insertions, 21 deletions
diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c index aee44aa..3c20f3d 100644 --- a/drivers/usb/gadget/designware_udc.c +++ b/drivers/usb/gadget/designware_udc.c @@ -497,16 +497,24 @@ static void dw_udc_epn_tx(int ep) { struct usb_endpoint_instance *endpoint = dw_find_ep(ep); + if (!endpoint) + return; + /* * We need to transmit a terminating zero-length packet now if * we have sent all of the data in this URB and the transfer * size was an exact multiple of the packet size. */ - if (endpoint && endpoint->tx_urb && endpoint->tx_urb->actual_length) { - if (endpoint->last == endpoint->tx_packetSize) { - /* handle zero length packet here */ - writel(0x0, &inep_regs_p[ep].write_done); - } + if (endpoint->tx_urb && + (endpoint->last == endpoint->tx_packetSize) && + (endpoint->tx_urb->actual_length - endpoint->sent - + endpoint->last == 0)) { + /* handle zero length packet here */ + writel(0x0, &inep_regs_p[ep].write_done); + + } + + if (endpoint->tx_urb && endpoint->tx_urb->actual_length) { /* retire the data that was just sent */ usbd_tx_complete(endpoint); /* @@ -548,8 +556,6 @@ int udc_init(void) readl(&plug_regs_p->plug_pending); - udc_disconnect(); - for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); @@ -561,10 +567,9 @@ int udc_init(void) writel(~0x0, &udc_regs_p->endp_int_mask); writel(DEV_CONF_FS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW | - /* Dev_Conf_SYNCFRAME | */ DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf); - writel(0x0, &udc_regs_p->dev_cntl); + writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl); /* Clear all interrupts pending */ writel(DEV_INT_MSK, &udc_regs_p->dev_int); @@ -588,6 +593,9 @@ void udc_setup_ep(struct usb_device_instance *device, char *tt; u32 endp_intmask; + if ((ep != 0) && (udc_device->device_state < STATE_ADDRESSED)) + return; + tt = getenv("usbtty"); if (!tt) tt = "generic"; @@ -647,9 +655,6 @@ void udc_setup_ep(struct usb_device_instance *device, writel(packet_size | ((buffer_size / sizeof(int)) << 16), &out_p->endp_maxpacksize); - writel((packet_size << 19) | ENDP_EPTYPE_CNTL, - &udc_regs_p->udc_endp_reg[ep_num]); - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { /* Setup the IN endpoint */ writel(0x0, &in_p->endp_status); @@ -708,7 +713,17 @@ void udc_setup_ep(struct usb_device_instance *device, /* Turn on the USB connection by enabling the pullup resistor */ void udc_connect(void) { - u32 plug_st; + u32 plug_st, dev_cntl; + + dev_cntl = readl(&udc_regs_p->dev_cntl); + dev_cntl |= DEV_CNTL_SOFTDISCONNECT; + writel(dev_cntl, &udc_regs_p->dev_cntl); + + udelay(1000); + + dev_cntl = readl(&udc_regs_p->dev_cntl); + dev_cntl &= ~DEV_CNTL_SOFTDISCONNECT; + writel(dev_cntl, &udc_regs_p->dev_cntl); plug_st = readl(&plug_regs_p->plug_state); plug_st &= ~(PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE); @@ -720,6 +735,8 @@ void udc_disconnect(void) { u32 plug_st; + writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl); + plug_st = readl(&plug_regs_p->plug_state); plug_st |= (PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE); writel(plug_st, &plug_regs_p->plug_state); @@ -789,11 +806,6 @@ void dw_udc_plug_irq(void) UDCDBG("device attached and powered"); udc_state_transition(udc_device->device_state, STATE_POWERED); } else { - /* - * USB cable detached - * Reset the PHY and switch the mode. - */ - udc_disconnect(); writel(~0x0, &udc_regs_p->dev_int_mask); UDCDBG("device detached or unpowered"); @@ -809,13 +821,18 @@ void dw_udc_dev_irq(void) if (readl(&udc_regs_p->dev_int) & DEV_INT_USBRESET) { writel(~0x0, &udc_regs_p->endp_int_mask); - udc_connect(); - writel(readl(&inep_regs_p[0].endp_cntl) | ENDP_CNTL_FLUSH, &inep_regs_p[0].endp_cntl); writel(DEV_INT_USBRESET, &udc_regs_p->dev_int); + /* + * This endpoint0 specific register can be programmed only + * after the phy clock is initialized + */ + writel((EP0_MAX_PACKET_SIZE << 19) | ENDP_EPTYPE_CNTL, + &udc_regs_p->udc_endp_reg[0]); + UDCDBG("device reset in progess"); udc_state_transition(udc_device->device_state, STATE_DEFAULT); } @@ -902,7 +919,7 @@ void dw_udc_endpoint_irq(void) writel(ENDP0_INT_CTRLIN, &udc_regs_p->endp_int); } - while (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) { + if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) { u32 epnum = 0; u32 ep_int = readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK; |