diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/host/xhci-omap.c | 326 |
2 files changed, 327 insertions, 0 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index eb50bc1..328752c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -45,6 +45,7 @@ COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o # xhci COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o COBJS-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o +COBJS-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c new file mode 100644 index 0000000..f4e41fd --- /dev/null +++ b/drivers/usb/host/xhci-omap.c @@ -0,0 +1,326 @@ +/* + * OMAP USB HOST xHCI Controller + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <usb.h> +#include <asm-generic/errno.h> +#include <asm/omap_common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/xhci-omap.h> + +#include <linux/compat.h> +#include <linux/usb/dwc3.h> + +#include "xhci.h" + +/* Declare global data pointer */ +DECLARE_GLOBAL_DATA_PTR; + +static struct omap_xhci omap; + +struct usb_dpll_params { + u16 m; + u8 n; + u8 freq:3; + u8 sd; + u32 mf; +}; + +#define NUM_USB_CLKS 6 + +static struct usb_dpll_params omap_usb3_dpll_params[NUM_USB_CLKS] = { + {1250, 5, 4, 20, 0}, /* 12 MHz */ + {3125, 20, 4, 20, 0}, /* 16.8 MHz */ + {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ + {1250, 12, 4, 20, 0}, /* 26 MHz */ + {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ + {1000, 7, 4, 10, 0}, /* 20 MHz */ +}; + +static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs) +{ + u32 val; + + writel(SET_PLL_GO, &phy_regs->pll_go); + do { + val = readl(&phy_regs->pll_status); + if (val & PLL_LOCK) + break; + } while (1); +} + +static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs) +{ + u32 clk_index = get_sys_clk_index(); + u32 val; + + val = readl(&phy_regs->pll_config_1); + val &= ~PLL_REGN_MASK; + val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; + writel(val, &phy_regs->pll_config_1); + + val = readl(&phy_regs->pll_config_2); + val &= ~PLL_SELFREQDCO_MASK; + val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; + writel(val, &phy_regs->pll_config_2); + + val = readl(&phy_regs->pll_config_1); + val &= ~PLL_REGM_MASK; + val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; + writel(val, &phy_regs->pll_config_1); + + val = readl(&phy_regs->pll_config_4); + val &= ~PLL_REGM_F_MASK; + val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; + writel(val, &phy_regs->pll_config_4); + + val = readl(&phy_regs->pll_config_3); + val &= ~PLL_SD_MASK; + val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; + writel(val, &phy_regs->pll_config_3); + + omap_usb_dpll_relock(phy_regs); +} + +static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs) +{ + u32 rate = get_sys_clk_freq()/1000000; + u32 val; + + val = readl((*ctrl)->control_phy_power_usb); + val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK); + val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON); + val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT; + + writel(val, (*ctrl)->control_phy_power_usb); +} + +static void usb3_phy_power(int on) +{ + u32 val; + + val = readl((*ctrl)->control_phy_power_usb); + if (on) { + val &= ~USB3_PWRCTL_CLK_CMD_MASK; + val |= USB3_PHY_TX_RX_POWERON; + } else { + val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON); + } + + writel(val, (*ctrl)->control_phy_power_usb); +} + +static void dwc_usb3_phy_init(struct omap_usb3_phy *phy_regs) +{ + omap_usb_dpll_lock(phy_regs); + + usb3_phy_partial_powerup(phy_regs); + /* + * Give enough time for the PHY to partially power-up before + * powering it up completely. delay value suggested by the HW + * team. + */ + mdelay(100); + usb3_phy_power(1); +} + +static void omap_enable_phy_clocks(struct omap_xhci *omap) +{ + u32 val; + + /* Setting OCP2SCP1 register */ + setbits_le32((*prcm)->cm_l3init_ocp2scp1_clkctrl, + OCP2SCP1_CLKCTRL_MODULEMODE_HW); + + /* Turn on 32K AON clk */ + setbits_le32((*prcm)->cm_coreaon_usb_phy_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + + /* Setting CM_L3INIT_CLKSTCTRL to 0x0 i.e NO sleep */ + writel(0x0, (*prcm)->cm_l3init_clkstctrl); + + val = (USBOTGSS_DMADISABLE | + USBOTGSS_STANDBYMODE_SMRT_WKUP | + USBOTGSS_IDLEMODE_NOIDLE); + writel(val, &omap->otg_wrapper->sysconfig); + + /* Clear the utmi OTG status */ + val = readl(&omap->otg_wrapper->utmi_otg_status); + writel(val, &omap->otg_wrapper->utmi_otg_status); + + /* Enable interrupts */ + writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0); + val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN | + USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN | + USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN | + USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN | + USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN | + USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN | + USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN | + USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN | + USBOTGSS_IRQ_SET_1_OEVT_EN); + writel(val, &omap->otg_wrapper->irqenable_set_1); + + /* Clear the IRQ status */ + val = readl(&omap->otg_wrapper->irqstatus_1); + writel(val, &omap->otg_wrapper->irqstatus_1); + val = readl(&omap->otg_wrapper->irqstatus_0); + writel(val, &omap->otg_wrapper->irqstatus_0); + + /* Enable the USB OTG Super speed clocks */ + val = (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW); + setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, val); + +}; + +inline int __board_usb_init(void) +{ + return 0; +} +int board_usb_init(void) __attribute__((weak, alias("__board_usb_init"))); + +static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) +{ + clrsetbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), + DWC3_GCTL_PRTCAPDIR(mode)); +} + +static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) +{ + /* Before Resetting PHY, put Core in Reset */ + setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); + + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(100); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + + /* After PHYs are stable we can take Core out of reset state */ + clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); +} + +static int dwc3_core_init(struct dwc3 *dwc3_reg) +{ + u32 reg; + u32 revision; + unsigned int dwc3_hwparams1; + + revision = readl(&dwc3_reg->g_snpsid); + /* This should read as U3 followed by revision number */ + if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { + puts("this is not a DesignWare USB3 DRD Core\n"); + return -1; + } + + dwc3_core_soft_reset(dwc3_reg); + + dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); + + reg = readl(&dwc3_reg->g_ctl); + reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + reg &= ~DWC3_GCTL_DISSCRAMBLE; + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + debug("No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * where the device can fail to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter a Connect/Disconnect loop + */ + if ((revision & DWC3_REVISION_MASK) < 0x190a) + reg |= DWC3_GCTL_U2RSTECN; + + writel(reg, &dwc3_reg->g_ctl); + + return 0; +} + +static int omap_xhci_core_init(struct omap_xhci *omap) +{ + int ret = 0; + + omap_enable_phy_clocks(omap); + + dwc_usb3_phy_init(omap->usb3_phy); + + ret = dwc3_core_init(omap->dwc3_reg); + if (ret) { + debug("%s:failed to initialize core\n", __func__); + return ret; + } + + /* We are hard-coding DWC3 core to Host Mode */ + dwc3_set_mode(omap->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); + + return ret; +} + +static void omap_xhci_core_exit(struct omap_xhci *omap) +{ + usb3_phy_power(0); +} + +int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor) +{ + struct omap_xhci *ctx = &omap; + int ret = 0; + + ctx->hcd = (struct xhci_hccr *)OMAP_XHCI_BASE; + ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); + ctx->usb3_phy = (struct omap_usb3_phy *)OMAP_OCP1_SCP_BASE; + ctx->otg_wrapper = (struct omap_dwc_wrapper *)OMAP_OTG_WRAPPER_BASE; + + ret = board_usb_init(); + if (ret != 0) { + puts("Failed to initialize board for USB\n"); + return ret; + } + + ret = omap_xhci_core_init(ctx); + if (ret < 0) { + puts("Failed to initialize xhci\n"); + return ret; + } + + *hccr = (struct xhci_hccr *)(OMAP_XHCI_BASE); + *hcor = (struct xhci_hcor *)((uint32_t) *hccr + + HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); + + debug("omap-xhci: init hccr %x and hcor %x hc_length %d\n", + (uint32_t)*hccr, (uint32_t)*hcor, + (uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); + + return ret; +} + +void xhci_hcd_stop(int index) +{ + struct omap_xhci *ctx = &omap; + + omap_xhci_core_exit(ctx); +} |