3 files changed, 96 insertions, 0 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
new file mode 100644
index 0000000..30d1457
--- /dev/null
+++ b/drivers/usb/host/Kconfig
@@ -0,0 +1,56 @@
+#
+# USB Host Controller Drivers
+#
+comment "USB Host Controller Drivers"
+
+config USB_XHCI_HCD
+	bool "xHCI HCD (USB 3.0) support"
+	---help---
+	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+	  "SuperSpeed" host controller hardware.
+
+config USB_XHCI
+	bool
+	default USB_XHCI_HCD
+	---help---
+	  TODO: rename after most boards switch to Kconfig
+
+if USB_XHCI_HCD
+
+endif
+
+config USB_EHCI_HCD
+	bool "EHCI HCD (USB 2.0) support"
+	---help---
+	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
+	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
+	  If your USB host controller supports USB 2.0, you will likely want to
+	  configure this Host Controller Driver.
+
+	  EHCI controllers are packaged with "companion" host controllers (OHCI
+	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
+	  will connect to EHCI if the device is high speed, otherwise they
+	  connect to a companion controller.  If you configure EHCI, you should
+	  probably configure the OHCI (for NEC and some other vendors) USB Host
+	  Controller Driver or UHCI (for Via motherboards) Host Controller
+	  Driver too.
+
+	  You may want to read <file:Documentation/usb/ehci.txt>.
+
+config USB_EHCI
+	bool
+	default USB_EHCI_HCD
+	---help---
+	  TODO: rename after most boards switch to Kconfig
+
+if USB_EHCI_HCD
+
+config USB_EHCI_UNIPHIER
+	bool "Support for Panasonic UniPhier on-chip EHCI USB controller"
+	depends on ARCH_UNIPHIER
+	default y
+	---help---
+	  Enables support for the on-chip EHCI controller on Panasonic
+	  UniPhier SoCs.
+
+endif
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1c35929..c11b551 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o
 obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
 obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c
new file mode 100644
index 0000000..77f6c9d
--- /dev/null
+++ b/drivers/usb/host/ehci-uniphier.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/arch/ehci-uniphier.h>
+#include "ehci.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
+		  struct ehci_hcor **hcor)
+{
+	struct ehci_hccr *cr;
+	struct ehci_hcor *or;
+
+	uniphier_ehci_reset(index, 0);
+
+	cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base);
+	or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase));
+
+	*hccr = cr;
+	*hcor = or;
+
+	return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+	uniphier_ehci_reset(index, 1);
+
+	return 0;
+}