diff options
Diffstat (limited to 'drivers/usb/host/xhci.c')
| -rw-r--r-- | drivers/usb/host/xhci.c | 1030 |
1 files changed, 1030 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c new file mode 100644 index 0000000..57fa4ff --- /dev/null +++ b/drivers/usb/host/xhci.c @@ -0,0 +1,1030 @@ +/* + * USB HOST XHCI Controller stack + * + * Based on xHCI host controller driver in linux-kernel + * by Sarah Sharp. + * + * Copyright (C) 2008 Intel Corp. + * Author: Sarah Sharp + * + * Copyright (C) 2013 Samsung Electronics Co.Ltd + * Authors: Vivek Gautam <gautam.vivek@samsung.com> + * Vikas Sajjan <vikas.sajjan@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/** + * This file gives the xhci stack for usb3.0 looking into + * xhci specification Rev1.0 (5/21/10). + * The quirk devices support hasn't been given yet. + */ + +#include <common.h> +#include <asm/byteorder.h> +#include <usb.h> +#include <malloc.h> +#include <watchdog.h> +#include <asm/cache.h> +#include <asm/unaligned.h> +#include <asm-generic/errno.h> +#include "xhci.h" + +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#endif + +static struct descriptor { + struct usb_hub_descriptor hub; + struct usb_device_descriptor device; + struct usb_config_descriptor config; + struct usb_interface_descriptor interface; + struct usb_endpoint_descriptor endpoint; + struct usb_ss_ep_comp_descriptor ep_companion; +} __attribute__ ((packed)) descriptor = { + { + 0xc, /* bDescLength */ + 0x2a, /* bDescriptorType: hub descriptor */ + 2, /* bNrPorts -- runtime modified */ + cpu_to_le16(0x8), /* wHubCharacteristics */ + 10, /* bPwrOn2PwrGood */ + 0, /* bHubCntrCurrent */ + {}, /* Device removable */ + {} /* at most 7 ports! XXX */ + }, + { + 0x12, /* bLength */ + 1, /* bDescriptorType: UDESC_DEVICE */ + cpu_to_le16(0x0300), /* bcdUSB: v3.0 */ + 9, /* bDeviceClass: UDCLASS_HUB */ + 0, /* bDeviceSubClass: UDSUBCLASS_HUB */ + 3, /* bDeviceProtocol: UDPROTO_SSHUBSTT */ + 9, /* bMaxPacketSize: 512 bytes 2^9 */ + 0x0000, /* idVendor */ + 0x0000, /* idProduct */ + cpu_to_le16(0x0100), /* bcdDevice */ + 1, /* iManufacturer */ + 2, /* iProduct */ + 0, /* iSerialNumber */ + 1 /* bNumConfigurations: 1 */ + }, + { + 0x9, + 2, /* bDescriptorType: UDESC_CONFIG */ + cpu_to_le16(0x1f), /* includes SS endpoint descriptor */ + 1, /* bNumInterface */ + 1, /* bConfigurationValue */ + 0, /* iConfiguration */ + 0x40, /* bmAttributes: UC_SELF_POWER */ + 0 /* bMaxPower */ + }, + { + 0x9, /* bLength */ + 4, /* bDescriptorType: UDESC_INTERFACE */ + 0, /* bInterfaceNumber */ + 0, /* bAlternateSetting */ + 1, /* bNumEndpoints */ + 9, /* bInterfaceClass: UICLASS_HUB */ + 0, /* bInterfaceSubClass: UISUBCLASS_HUB */ + 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */ + 0 /* iInterface */ + }, + { + 0x7, /* bLength */ + 5, /* bDescriptorType: UDESC_ENDPOINT */ + 0x81, /* bEndpointAddress: IN endpoint 1 */ + 3, /* bmAttributes: UE_INTERRUPT */ + 8, /* wMaxPacketSize */ + 255 /* bInterval */ + }, + { + 0x06, /* ss_bLength */ + 0x30, /* ss_bDescriptorType: SS EP Companion */ + 0x00, /* ss_bMaxBurst: allows 1 TX between ACKs */ + /* ss_bmAttributes: 1 packet per service interval */ + 0x00, + /* ss_wBytesPerInterval: 15 bits for max 15 ports */ + cpu_to_le16(0x02), + }, +}; + +static struct xhci_ctrl xhcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; + +/** + * Waits for as per specified amount of time + * for the "result" to match with "done" + * + * @param ptr pointer to the register to be read + * @param mask mask for the value read + * @param done value to be campared with result + * @param usec time to wait till + * @return 0 if handshake is success else < 0 on failure + */ +static int handshake(uint32_t volatile *ptr, uint32_t mask, + uint32_t done, int usec) +{ + uint32_t result; + + do { + result = xhci_readl(ptr); + if (result == ~(uint32_t)0) + return -ENODEV; + result &= mask; + if (result == done) + return 0; + usec--; + udelay(1); + } while (usec > 0); + + return -ETIMEDOUT; +} + +/** + * Set the run bit and wait for the host to be running. + * + * @param hcor pointer to host controller operation registers + * @return status of the Handshake + */ +static int xhci_start(struct xhci_hcor *hcor) +{ + u32 temp; + int ret; + + puts("Starting the controller\n"); + temp = xhci_readl(&hcor->or_usbcmd); + temp |= (CMD_RUN); + xhci_writel(&hcor->or_usbcmd, temp); + + /* + * Wait for the HCHalted Status bit to be 0 to indicate the host is + * running. + */ + ret = handshake(&hcor->or_usbsts, STS_HALT, 0, XHCI_MAX_HALT_USEC); + if (ret) + debug("Host took too long to start, " + "waited %u microseconds.\n", + XHCI_MAX_HALT_USEC); + return ret; +} + +/** + * Resets the XHCI Controller + * + * @param hcor pointer to host controller operation registers + * @return -EBUSY if XHCI Controller is not halted else status of handshake + */ +int xhci_reset(struct xhci_hcor *hcor) +{ + u32 cmd; + u32 state; + int ret; + + /* Halting the Host first */ + debug("// Halt the HC\n"); + state = xhci_readl(&hcor->or_usbsts) & STS_HALT; + if (!state) { + cmd = xhci_readl(&hcor->or_usbcmd); + cmd &= ~CMD_RUN; + xhci_writel(&hcor->or_usbcmd, cmd); + } + + ret = handshake(&hcor->or_usbsts, + STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); + if (ret) { + printf("Host not halted after %u microseconds.\n", + XHCI_MAX_HALT_USEC); + return -EBUSY; + } + + debug("// Reset the HC\n"); + cmd = xhci_readl(&hcor->or_usbcmd); + cmd |= CMD_RESET; + xhci_writel(&hcor->or_usbcmd, cmd); + + ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, XHCI_MAX_RESET_USEC); + if (ret) + return ret; + + /* + * xHCI cannot write to any doorbells or operational registers other + * than status until the "Controller Not Ready" flag is cleared. + */ + return handshake(&hcor->or_usbsts, STS_CNR, 0, XHCI_MAX_RESET_USEC); +} + +/** + * Used for passing endpoint bitmasks between the core and HCDs. + * Find the index for an endpoint given its descriptor. + * Use the return value to right shift 1 for the bitmask. + * + * Index = (epnum * 2) + direction - 1, + * where direction = 0 for OUT, 1 for IN. + * For control endpoints, the IN index is used (OUT index is unused), so + * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2) + * + * @param desc USB enpdoint Descriptor + * @return index of the Endpoint + */ +static unsigned int xhci_get_ep_index(struct usb_endpoint_descriptor *desc) +{ + unsigned int index; + + if (usb_endpoint_xfer_control(desc)) + index = (unsigned int)(usb_endpoint_num(desc) * 2); + else + index = (unsigned int)((usb_endpoint_num(desc) * 2) - + (usb_endpoint_dir_in(desc) ? 0 : 1)); + + return index; +} + +/** + * Issue a configure endpoint command or evaluate context command + * and wait for it to finish. + * + * @param udev pointer to the Device Data Structure + * @param ctx_change flag to indicate the Context has changed or NOT + * @return 0 on success, -1 on failure + */ +static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_virt_device *virt_dev; + struct xhci_ctrl *ctrl = udev->controller; + union xhci_trb *event; + + virt_dev = ctrl->devs[udev->slot_id]; + in_ctx = virt_dev->in_ctx; + + xhci_flush_cache((uint32_t)in_ctx->bytes, in_ctx->size); + xhci_queue_command(ctrl, in_ctx->bytes, udev->slot_id, 0, + ctx_change ? TRB_EVAL_CONTEXT : TRB_CONFIG_EP); + event = xhci_wait_for_event(ctrl, TRB_COMPLETION); + BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) + != udev->slot_id); + + switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) { + case COMP_SUCCESS: + debug("Successful %s command\n", + ctx_change ? "Evaluate Context" : "Configure Endpoint"); + break; + default: + printf("ERROR: %s command returned completion code %d.\n", + ctx_change ? "Evaluate Context" : "Configure Endpoint", + GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))); + return -EINVAL; + } + + xhci_acknowledge_event(ctrl); + + return 0; +} + +/** + * Configure the endpoint, programming the device contexts. + * + * @param udev pointer to the USB device structure + * @return returns the status of the xhci_configure_endpoints + */ +static int xhci_set_configuration(struct usb_device *udev) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_container_ctx *out_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + struct xhci_ep_ctx *ep_ctx[MAX_EP_CTX_NUM]; + int cur_ep; + int max_ep_flag = 0; + int ep_index; + unsigned int dir; + unsigned int ep_type; + struct xhci_ctrl *ctrl = udev->controller; + int num_of_ep; + int ep_flag = 0; + u64 trb_64 = 0; + int slot_id = udev->slot_id; + struct xhci_virt_device *virt_dev = ctrl->devs[slot_id]; + struct usb_interface *ifdesc; + + out_ctx = virt_dev->out_ctx; + in_ctx = virt_dev->in_ctx; + + num_of_ep = udev->config.if_desc[0].no_of_ep; + ifdesc = &udev->config.if_desc[0]; + + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); + /* Zero the input context control */ + ctrl_ctx->add_flags = 0; + ctrl_ctx->drop_flags = 0; + + /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */ + for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { + ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]); + ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1)); + if (max_ep_flag < ep_flag) + max_ep_flag = ep_flag; + } + + xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size); + + /* slot context */ + xhci_slot_copy(ctrl, in_ctx, out_ctx); + slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx); + slot_ctx->dev_info &= ~(LAST_CTX_MASK); + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0); + + xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0); + + /* filling up ep contexts */ + for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { + struct usb_endpoint_descriptor *endpt_desc = NULL; + + endpt_desc = &ifdesc->ep_desc[cur_ep]; + trb_64 = 0; + + ep_index = xhci_get_ep_index(endpt_desc); + ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, in_ctx, ep_index); + + /* Allocate the ep rings */ + virt_dev->eps[ep_index].ring = xhci_ring_alloc(1, true); + if (!virt_dev->eps[ep_index].ring) + return -ENOMEM; + + /*NOTE: ep_desc[0] actually represents EP1 and so on */ + dir = (((endpt_desc->bEndpointAddress) & (0x80)) >> 7); + ep_type = (((endpt_desc->bmAttributes) & (0x3)) | (dir << 2)); + ep_ctx[ep_index]->ep_info2 = + cpu_to_le32(ep_type << EP_TYPE_SHIFT); + ep_ctx[ep_index]->ep_info2 |= + cpu_to_le32(MAX_PACKET + (get_unaligned(&endpt_desc->wMaxPacketSize))); + + ep_ctx[ep_index]->ep_info2 |= + cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) | + ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT)); + + trb_64 = (uintptr_t) + virt_dev->eps[ep_index].ring->enqueue; + ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 | + virt_dev->eps[ep_index].ring->cycle_state); + } + + return xhci_configure_endpoints(udev, false); +} + +/** + * Issue an Address Device command (which will issue a SetAddress request to + * the device). + * + * @param udev pointer to the Device Data Structure + * @return 0 if successful else error code on failure + */ +static int xhci_address_device(struct usb_device *udev) +{ + int ret = 0; + struct xhci_ctrl *ctrl = udev->controller; + struct xhci_slot_ctx *slot_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_virt_device *virt_dev; + int slot_id = udev->slot_id; + union xhci_trb *event; + + virt_dev = ctrl->devs[slot_id]; + + /* + * This is the first Set Address since device plug-in + * so setting up the slot context. + */ + debug("Setting up addressable devices\n"); + xhci_setup_addressable_virt_dev(udev); + + ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); + ctrl_ctx->drop_flags = 0; + + xhci_queue_command(ctrl, (void *)ctrl_ctx, slot_id, 0, TRB_ADDR_DEV); + event = xhci_wait_for_event(ctrl, TRB_COMPLETION); + BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != slot_id); + + switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) { + case COMP_CTX_STATE: + case COMP_EBADSLT: + printf("Setup ERROR: address device command for slot %d.\n", + slot_id); + ret = -EINVAL; + break; + case COMP_TX_ERR: + puts("Device not responding to set address.\n"); + ret = -EPROTO; + break; + case COMP_DEV_ERR: + puts("ERROR: Incompatible device" + "for address device command.\n"); + ret = -ENODEV; + break; + case COMP_SUCCESS: + debug("Successful Address Device command\n"); + udev->status = 0; + break; + default: + printf("ERROR: unexpected command completion code 0x%x.\n", + GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))); + ret = -EINVAL; + break; + } + + xhci_acknowledge_event(ctrl); + + if (ret < 0) + /* + * TODO: Unsuccessful Address Device command shall leave the + * slot in default state. So, issue Disable Slot command now. + */ + return ret; + + xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes, + virt_dev->out_ctx->size); + slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->out_ctx); + + debug("xHC internal address is: %d\n", + le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); + + return 0; +} + +/** + * Issue Enable slot command to the controller to allocate + * device slot and assign the slot id. It fails if the xHC + * ran out of device slots, the Enable Slot command timed out, + * or allocating memory failed. + * + * @param udev pointer to the Device Data Structure + * @return Returns 0 on succes else return error code on failure + */ +int usb_alloc_device(struct usb_device *udev) +{ + union xhci_trb *event; + struct xhci_ctrl *ctrl = udev->controller; + int ret; + + /* + * Root hub will be first device to be initailized. + * If this device is root-hub, don't do any xHC related + * stuff. + */ + if (ctrl->rootdev == 0) { + udev->speed = USB_SPEED_SUPER; + return 0; + } + + xhci_queue_command(ctrl, NULL, 0, 0, TRB_ENABLE_SLOT); + event = xhci_wait_for_event(ctrl, TRB_COMPLETION); + BUG_ON(GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)) + != COMP_SUCCESS); + + udev->slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)); + + xhci_acknowledge_event(ctrl); + + ret = xhci_alloc_virt_device(udev); + if (ret < 0) { + /* + * TODO: Unsuccessful Address Device command shall leave + * the slot in default. So, issue Disable Slot command now. + */ + puts("Could not allocate xHCI USB device data structures\n"); + return ret; + } + + return 0; +} + +/* + * Full speed devices may have a max packet size greater than 8 bytes, but the + * USB core doesn't know that until it reads the first 8 bytes of the + * descriptor. If the usb_device's max packet size changes after that point, + * we need to issue an evaluate context command and wait on it. + * + * @param udev pointer to the Device Data Structure + * @return returns the status of the xhci_configure_endpoints + */ +int xhci_check_maxpacket(struct usb_device *udev) +{ + struct xhci_ctrl *ctrl = udev->controller; + unsigned int slot_id = udev->slot_id; + int ep_index = 0; /* control endpoint */ + struct xhci_container_ctx *in_ctx; + struct xhci_container_ctx *out_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; + int max_packet_size; + int hw_max_packet_size; + int ret = 0; + struct usb_interface *ifdesc; + + ifdesc = &udev->config.if_desc[0]; + + out_ctx = ctrl->devs[slot_id]->out_ctx; + xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size); + + ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index); + hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); + max_packet_size = usb_endpoint_maxp(&ifdesc->ep_desc[0]); + if (hw_max_packet_size != max_packet_size) { + debug("Max Packet Size for ep 0 changed.\n"); + debug("Max packet size in usb_device = %d\n", max_packet_size); + debug("Max packet size in xHCI HW = %d\n", hw_max_packet_size); + debug("Issuing evaluate context command.\n"); + + /* Set up the modified control endpoint 0 */ + xhci_endpoint_copy(ctrl, ctrl->devs[slot_id]->in_ctx, + ctrl->devs[slot_id]->out_ctx, ep_index); + in_ctx = ctrl->devs[slot_id]->in_ctx; + ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index); + ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK); + ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size)); + + /* + * Set up the input context flags for the command + * FIXME: This won't work if a non-default control endpoint + * changes max packet sizes. + */ + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG); + ctrl_ctx->drop_flags = 0; + + ret = xhci_configure_endpoints(udev, true); + } + return ret; +} + +/** + * Clears the Change bits of the Port Status Register + * + * @param wValue request value + * @param wIndex request index + * @param addr address of posrt status register + * @param port_status state of port status register + * @return none + */ +static void xhci_clear_port_change_bit(u16 wValue, + u16 wIndex, volatile uint32_t *addr, u32 port_status) +{ + char *port_change_bit; + u32 status; + + switch (wValue) { + case USB_PORT_FEAT_C_RESET: + status = PORT_RC; + port_change_bit = "reset"; + break; + case USB_PORT_FEAT_C_CONNECTION: + status = PORT_CSC; + port_change_bit = "connect"; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + status = PORT_OCC; + port_change_bit = "over-current"; + break; + case USB_PORT_FEAT_C_ENABLE: + status = PORT_PEC; + port_change_bit = "enable/disable"; + break; + case USB_PORT_FEAT_C_SUSPEND: + status = PORT_PLC; + port_change_bit = "suspend/resume"; + break; + default: + /* Should never happen */ + return; + } + + /* Change bits are all write 1 to clear */ + xhci_writel(addr, port_status | status); + + port_status = xhci_readl(addr); + debug("clear port %s change, actual port %d status = 0x%x\n", + port_change_bit, wIndex, port_status); +} + +/** + * Save Read Only (RO) bits and save read/write bits where + * writing a 0 clears the bit and writing a 1 sets the bit (RWS). + * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect. + * + * @param state state of the Port Status and Control Regsiter + * @return a value that would result in the port being in the + * same state, if the value was written to the port + * status control register. + */ +static u32 xhci_port_state_to_neutral(u32 state) +{ + /* Save read-only status and port state */ + return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); +} + +/** + * Submits the Requests to the XHCI Host Controller + * + * @param udev pointer to the USB device structure + * @param pipe contains the DIR_IN or OUT , devnum + * @param buffer buffer to be read/written based on the request + * @return returns 0 if successful else -1 on failure + */ +static int xhci_submit_root(struct usb_device *udev, unsigned long pipe, + void *buffer, struct devrequest *req) +{ + uint8_t tmpbuf[4]; + u16 typeReq; + void *srcptr = NULL; + int len, srclen; + uint32_t reg; + volatile uint32_t *status_reg; + struct xhci_ctrl *ctrl = udev->controller; + struct xhci_hcor *hcor = ctrl->hcor; + + if (((req->requesttype & USB_RT_PORT) && + le16_to_cpu(req->index)) > CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) { + printf("The request port(%d) is not configured\n", + le16_to_cpu(req->index) - 1); + return -EINVAL; + } + + status_reg = (volatile uint32_t *) + (&hcor->portregs[le16_to_cpu(req->index) - 1].or_portsc); + srclen = 0; + + typeReq = req->request | req->requesttype << 8; + + switch (typeReq) { + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (le16_to_cpu(req->value) >> 8) { + case USB_DT_DEVICE: + debug("USB_DT_DEVICE request\n"); + srcptr = &descriptor.device; + srclen = 0x12; + break; + case USB_DT_CONFIG: + debug("USB_DT_CONFIG config\n"); + srcptr = &descriptor.config; + srclen = 0x19; + break; + case USB_DT_STRING: + debug("USB_DT_STRING config\n"); + switch (le16_to_cpu(req->value) & 0xff) { + case 0: /* Language */ + srcptr = "\4\3\11\4"; + srclen = 4; + break; + case 1: /* Vendor String */ + srcptr = "\16\3u\0-\0b\0o\0o\0t\0"; + srclen = 14; + break; + case 2: /* Product Name */ + srcptr = "\52\3X\0H\0C\0I\0 " + "\0H\0o\0s\0t\0 " + "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0"; + srclen = 42; + break; + default: + printf("unknown value DT_STRING %x\n", + le16_to_cpu(req->value)); + goto unknown; + } + break; + default: + printf("unknown value %x\n", le16_to_cpu(req->value)); + goto unknown; + } + break; + case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8): + switch (le16_to_cpu(req->value) >> 8) { + case USB_DT_HUB: + debug("USB_DT_HUB config\n"); + srcptr = &descriptor.hub; + srclen = 0x8; + break; + default: + printf("unknown value %x\n", le16_to_cpu(req->value)); + goto unknown; + } + break; + case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8): + debug("USB_REQ_SET_ADDRESS\n"); + ctrl->rootdev = le16_to_cpu(req->value); + break; + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + /* Do nothing */ + break; + case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8): + tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */ + tmpbuf[1] = 0; + srcptr = tmpbuf; + srclen = 2; + break; + case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): + memset(tmpbuf, 0, 4); + reg = xhci_readl(status_reg); + if (reg & PORT_CONNECT) { + tmpbuf[0] |= USB_PORT_STAT_CONNECTION; + switch (reg & DEV_SPEED_MASK) { + case XDEV_FS: + debug("SPEED = FULLSPEED\n"); + break; + case XDEV_LS: + debug("SPEED = LOWSPEED\n"); + tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; + break; + case XDEV_HS: + debug("SPEED = HIGHSPEED\n"); + tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; + break; + case XDEV_SS: + debug("SPEED = SUPERSPEED\n"); + tmpbuf[1] |= USB_PORT_STAT_SUPER_SPEED >> 8; + break; + } + } + if (reg & PORT_PE) + tmpbuf[0] |= USB_PORT_STAT_ENABLE; + if ((reg & PORT_PLS_MASK) == XDEV_U3) + tmpbuf[0] |= USB_PORT_STAT_SUSPEND; + if (reg & PORT_OC) + tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT; + if (reg & PORT_RESET) + tmpbuf[0] |= USB_PORT_STAT_RESET; + if (reg & PORT_POWER) + /* + * XXX: This Port power bit (for USB 3.0 hub) + * we are faking in USB 2.0 hub port status; + * since there's a change in bit positions in + * two: + * USB 2.0 port status PP is at position[8] + * USB 3.0 port status PP is at position[9] + * So, we are still keeping it at position [8] + */ + tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; + if (reg & PORT_CSC) + tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION; + if (reg & PORT_PEC) + tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; + if (reg & PORT_OCC) + tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; + if (reg & PORT_RC) + tmpbuf[2] |= USB_PORT_STAT_C_RESET; + + srcptr = tmpbuf; + srclen = 4; + break; + case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): + reg = xhci_readl(status_reg); + reg = xhci_port_state_to_neutral(reg); + switch (le16_to_cpu(req->value)) { + case USB_PORT_FEAT_ENABLE: + reg |= PORT_PE; + xhci_writel(status_reg, reg); + break; + case USB_PORT_FEAT_POWER: + reg |= PORT_POWER; + xhci_writel(status_reg, reg); + break; + case USB_PORT_FEAT_RESET: + reg |= PORT_RESET; + xhci_writel(status_reg, reg); + break; + default: + printf("unknown feature %x\n", le16_to_cpu(req->value)); + goto unknown; + } + break; + case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): + reg = xhci_readl(status_reg); + reg = xhci_port_state_to_neutral(reg); + switch (le16_to_cpu(req->value)) { + case USB_PORT_FEAT_ENABLE: + reg &= ~PORT_PE; + break; + case USB_PORT_FEAT_POWER: + reg &= ~PORT_POWER; + break; + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: + xhci_clear_port_change_bit((le16_to_cpu(req->value)), + le16_to_cpu(req->index), + status_reg, reg); + break; + default: + printf("unknown feature %x\n", le16_to_cpu(req->value)); + goto unknown; + } + xhci_writel(status_reg, reg); + break; + default: + puts("Unknown request\n"); + goto unknown; + } + + debug("scrlen = %d\n req->length = %d\n", + srclen, le16_to_cpu(req->length)); + + len = min(srclen, le16_to_cpu(req->length)); + + if (srcptr != NULL && len > 0) + memcpy(buffer, srcptr, len); + else + debug("Len is 0\n"); + + udev->act_len = len; + udev->status = 0; + + return 0; + +unknown: + udev->act_len = 0; + udev->status = USB_ST_STALLED; + + return -ENODEV; +} + +/** + * Submits the INT request to XHCI Host cotroller + * + * @param udev pointer to the USB device + * @param pipe contains the DIR_IN or OUT , devnum + * @param buffer buffer to be read/written based on the request + * @param length length of the buffer + * @param interval interval of the interrupt + * @return 0 + */ +int +submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer, + int length, int interval) +{ + /* + * TODO: Not addressing any interrupt type transfer requests + * Add support for it later. + */ + return -EINVAL; +} + +/** + * submit the BULK type of request to the USB Device + * + * @param udev pointer to the USB device + * @param pipe contains the DIR_IN or OUT , devnum + * @param buffer buffer to be read/written based on the request + * @param length length of the buffer + * @return returns 0 if successful else -1 on failure + */ +int +submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer, + int length) +{ + if (usb_pipetype(pipe) != PIPE_BULK) { + printf("non-bulk pipe (type=%lu)", usb_pipetype(pipe)); + return -EINVAL; + } + + return xhci_bulk_tx(udev, pipe, length, buffer); +} + +/** + * submit the control type of request to the Root hub/Device based on the devnum + * + * @param udev pointer to the USB device + * @param pipe contains the DIR_IN or OUT , devnum + * @param buffer buffer to be read/written based on the request + * @param length length of the buffer + * @param setup Request type + * @return returns 0 if successful else -1 on failure + */ +int +submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer, + int length, struct devrequest *setup) +{ + struct xhci_ctrl *ctrl = udev->controller; + int ret = 0; + + if (usb_pipetype(pipe) != PIPE_CONTROL) { + printf("non-control pipe (type=%lu)", usb_pipetype(pipe)); + return -EINVAL; + } + + if (usb_pipedevice(pipe) == ctrl->rootdev) + return xhci_submit_root(udev, pipe, buffer, setup); + + if (setup->request == USB_REQ_SET_ADDRESS) + return xhci_address_device(udev); + + if (setup->request == USB_REQ_SET_CONFIGURATION) { + ret = xhci_set_configuration(udev); + if (ret) { + puts("Failed to configure xHCI endpoint\n"); + return ret; + } + } + + return xhci_ctrl_tx(udev, pipe, setup, length, buffer); +} + +/** + * Intialises the XHCI host controller + * and allocates the necessary data structures + * + * @param index index to the host controller data structure + * @return pointer to the intialised controller + */ +int usb_lowlevel_init(int index, void **controller) +{ + uint32_t val; + uint32_t val2; + uint32_t reg; + struct xhci_hccr *hccr; + struct xhci_hcor *hcor; + struct xhci_ctrl *ctrl; + + if (xhci_hcd_init(index, &hccr, (struct xhci_hcor **)&hcor) != 0) + return -ENODEV; + + if (xhci_reset(hcor) != 0) + return -ENODEV; + + ctrl = &xhcic[index]; + + ctrl->hccr = hccr; + ctrl->hcor = hcor; + + /* + * Program the Number of Device Slots Enabled field in the CONFIG + * register with the max value of slots the HC can handle. + */ + val = (xhci_readl(&hccr->cr_hcsparams1) & HCS_SLOTS_MASK); + val2 = xhci_readl(&hcor->or_config); + val |= (val2 & ~HCS_SLOTS_MASK); + xhci_writel(&hcor->or_config, val); + + /* initializing xhci data structures */ + if (xhci_mem_init(ctrl, hccr, hcor) < 0) + return -ENOMEM; + + reg = xhci_readl(&hccr->cr_hcsparams1); + descriptor.hub.bNbrPorts = ((reg & HCS_MAX_PORTS_MASK) >> + HCS_MAX_PORTS_SHIFT); + printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); + + /* Port Indicators */ + reg = xhci_readl(&hccr->cr_hccparams); + if (HCS_INDICATOR(reg)) + put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) + | 0x80, &descriptor.hub.wHubCharacteristics); + + /* Port Power Control */ + if (HCC_PPC(reg)) + put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) + | 0x01, &descriptor.hub.wHubCharacteristics); + + if (xhci_start(hcor)) { + xhci_reset(hcor); + return -ENODEV; + } + + /* Zero'ing IRQ control register and IRQ pending register */ + xhci_writel(&ctrl->ir_set->irq_control, 0x0); + xhci_writel(&ctrl->ir_set->irq_pending, 0x0); + + reg = HC_VERSION(xhci_readl(&hccr->cr_capbase)); + printf("USB XHCI %x.%02x\n", reg >> 8, reg & 0xff); + + *controller = &xhcic[index]; + + return 0; +} + +/** + * Stops the XHCI host controller + * and cleans up all the related data structures + * + * @param index index to the host controller data structure + * @return none + */ +int usb_lowlevel_stop(int index) +{ + struct xhci_ctrl *ctrl = (xhcic + index); + u32 temp; + + xhci_reset(ctrl->hcor); + + debug("// Disabling event ring interrupts\n"); + temp = xhci_readl(&ctrl->hcor->or_usbsts); + xhci_writel(&ctrl->hcor->or_usbsts, temp & ~STS_EINT); + temp = xhci_readl(&ctrl->ir_set->irq_pending); + xhci_writel(&ctrl->ir_set->irq_pending, ER_IRQ_DISABLE(temp)); + + xhci_hcd_stop(index); + + xhci_cleanup(ctrl); + + return 0; +} |