diff options
Diffstat (limited to 'drivers/usb/host/ohci-hcd.c')
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 2016 |
1 files changed, 2016 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c new file mode 100644 index 0000000..e2f289e --- /dev/null +++ b/drivers/usb/host/ohci-hcd.c @@ -0,0 +1,2016 @@ +/* + * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus. + * + * Interrupt support is added. Now, it has been tested + * on ULI1575 chip and works well with USB keyboard. + * + * (C) Copyright 2007 + * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com> + * + * (C) Copyright 2003 + * Gary Jennejohn, DENX Software Engineering <gj@denx.de> + * + * Note: Much of this code has been derived from Linux 2.4 + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell + * + * Modified for the MP2USB by (C) Copyright 2005 Eric Benard + * ebenard@eukrea.com - based on s3c24x0's driver + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +/* + * IMPORTANT NOTES + * 1 - Read doc/README.generic_usb_ohci + * 2 - this driver is intended for use with USB Mass Storage Devices + * (BBB) and USB keyboard. There is NO support for Isochronous pipes! + * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG + * to activate workaround for bug #41 or this driver will NOT work! + */ + +#include <common.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCI_OHCI) +# include <pci.h> +#if !defined(CONFIG_PCI_OHCI_DEVNO) +#define CONFIG_PCI_OHCI_DEVNO 0 +#endif +#endif + +#include <malloc.h> +#include <usb.h> + +#include "ohci.h" + +#ifdef CONFIG_AT91RM9200 +#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */ +#endif + +#if defined(CONFIG_ARM920T) || \ + defined(CONFIG_S3C2400) || \ + defined(CONFIG_S3C2410) || \ + defined(CONFIG_S3C6400) || \ + defined(CONFIG_440EP) || \ + defined(CONFIG_PCI_OHCI) || \ + defined(CONFIG_MPC5200) || \ + defined(CONFIG_SYS_OHCI_USE_NPS) +# define OHCI_USE_NPS /* force NoPowerSwitching mode */ +#endif + +#undef OHCI_VERBOSE_DEBUG /* not always helpful */ +#undef DEBUG +#undef SHOW_INFO +#undef OHCI_FILL_TRACE + +/* For initializing controller (mask in an HCFS mode too) */ +#define OHCI_CONTROL_INIT \ + (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE + +/* + * e.g. PCI controllers need this + */ +#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS +# define readl(a) __swap_32(*((volatile u32 *)(a))) +# define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a)) +#else +# define readl(a) (*((volatile u32 *)(a))) +# define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a)) +#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */ + +#define min_t(type, x, y) \ + ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) + +#ifdef CONFIG_PCI_OHCI +static struct pci_device_id ohci_pci_ids[] = { + {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */ + {0x1033, 0x0035}, /* NEC PCI OHCI module ids */ + {0x1131, 0x1561}, /* Philips 1561 PCI OHCI module ids */ + /* Please add supported PCI OHCI controller ids here */ + {0, 0} +}; +#endif + +#ifdef CONFIG_PCI_EHCI_DEVNO +static struct pci_device_id ehci_pci_ids[] = { + {0x1131, 0x1562}, /* Philips 1562 PCI EHCI module ids */ + /* Please add supported PCI EHCI controller ids here */ + {0, 0} +}; +#endif + +#ifdef DEBUG +#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) +#else +#define dbg(format, arg...) do {} while (0) +#endif /* DEBUG */ +#define err(format, arg...) printf("ERROR: " format "\n", ## arg) +#ifdef SHOW_INFO +#define info(format, arg...) printf("INFO: " format "\n", ## arg) +#else +#define info(format, arg...) do {} while (0) +#endif + +#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER +# define m16_swap(x) cpu_to_be16(x) +# define m32_swap(x) cpu_to_be32(x) +#else +# define m16_swap(x) cpu_to_le16(x) +# define m32_swap(x) cpu_to_le32(x) +#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */ + +/* global ohci_t */ +static ohci_t gohci; +/* this must be aligned to a 256 byte boundary */ +struct ohci_hcca ghcca[1]; +/* a pointer to the aligned storage */ +struct ohci_hcca *phcca; +/* this allocates EDs for all possible endpoints */ +struct ohci_device ohci_dev; +/* device which was disconnected */ +struct usb_device *devgone; + +static inline u32 roothub_a(struct ohci *hc) + { return readl(&hc->regs->roothub.a); } +static inline u32 roothub_b(struct ohci *hc) + { return readl(&hc->regs->roothub.b); } +static inline u32 roothub_status(struct ohci *hc) + { return readl(&hc->regs->roothub.status); } +static inline u32 roothub_portstatus(struct ohci *hc, int i) + { return readl(&hc->regs->roothub.portstatus[i]); } + +/* forward declaration */ +static int hc_interrupt(void); +static void td_submit_job(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, + struct devrequest *setup, urb_priv_t *urb, + int interval); + +/*-------------------------------------------------------------------------* + * URB support functions + *-------------------------------------------------------------------------*/ + +/* free HCD-private data associated with this URB */ + +static void urb_free_priv(urb_priv_t *urb) +{ + int i; + int last; + struct td *td; + + last = urb->length - 1; + if (last >= 0) { + for (i = 0; i <= last; i++) { + td = urb->td[i]; + if (td) { + td->usb_dev = NULL; + urb->td[i] = NULL; + } + } + } + free(urb); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +static int sohci_get_current_frame_number(struct usb_device *dev); + +/* debug| print the main components of an URB + * small: 0) header + data packets 1) just header */ + +static void pkt_print(urb_priv_t *purb, struct usb_device *dev, + unsigned long pipe, void *buffer, int transfer_len, + struct devrequest *setup, char *str, int small) +{ + dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx", + str, + sohci_get_current_frame_number(dev), + usb_pipedevice(pipe), + usb_pipeendpoint(pipe), + usb_pipeout(pipe)? 'O': 'I', + usb_pipetype(pipe) < 2 ? \ + (usb_pipeint(pipe)? "INTR": "ISOC"): \ + (usb_pipecontrol(pipe)? "CTRL": "BULK"), + (purb ? purb->actual_length : 0), + transfer_len, dev->status); +#ifdef OHCI_VERBOSE_DEBUG + if (!small) { + int i, len; + + if (usb_pipecontrol(pipe)) { + printf(__FILE__ ": cmd(8):"); + for (i = 0; i < 8 ; i++) + printf(" %02x", ((__u8 *) setup) [i]); + printf("\n"); + } + if (transfer_len > 0 && buffer) { + printf(__FILE__ ": data(%d/%d):", + (purb ? purb->actual_length : 0), + transfer_len); + len = usb_pipeout(pipe)? transfer_len: + (purb ? purb->actual_length : 0); + for (i = 0; i < 16 && i < len; i++) + printf(" %02x", ((__u8 *) buffer) [i]); + printf("%s\n", i < len? "...": ""); + } + } +#endif +} + +/* just for debugging; prints non-empty branches of the int ed tree + * inclusive iso eds */ +void ep_print_int_eds(ohci_t *ohci, char *str) +{ + int i, j; + __u32 *ed_p; + for (i = 0; i < 32; i++) { + j = 5; + ed_p = &(ohci->hcca->int_table [i]); + if (*ed_p == 0) + continue; + printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i); + while (*ed_p != 0 && j--) { + ed_t *ed = (ed_t *)m32_swap(ed_p); + printf(" ed: %4x;", ed->hwINFO); + ed_p = &ed->hwNextED; + } + printf("\n"); + } +} + +static void ohci_dump_intr_mask(char *label, __u32 mask) +{ + dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s", + label, + mask, + (mask & OHCI_INTR_MIE) ? " MIE" : "", + (mask & OHCI_INTR_OC) ? " OC" : "", + (mask & OHCI_INTR_RHSC) ? " RHSC" : "", + (mask & OHCI_INTR_FNO) ? " FNO" : "", + (mask & OHCI_INTR_UE) ? " UE" : "", + (mask & OHCI_INTR_RD) ? " RD" : "", + (mask & OHCI_INTR_SF) ? " SF" : "", + (mask & OHCI_INTR_WDH) ? " WDH" : "", + (mask & OHCI_INTR_SO) ? " SO" : "" + ); +} + +static void maybe_print_eds(char *label, __u32 value) +{ + ed_t *edp = (ed_t *)value; + + if (value) { + dbg("%s %08x", label, value); + dbg("%08x", edp->hwINFO); + dbg("%08x", edp->hwTailP); + dbg("%08x", edp->hwHeadP); + dbg("%08x", edp->hwNextED); + } +} + +static char *hcfs2string(int state) +{ + switch (state) { + case OHCI_USB_RESET: return "reset"; + case OHCI_USB_RESUME: return "resume"; + case OHCI_USB_OPER: return "operational"; + case OHCI_USB_SUSPEND: return "suspend"; + } + return "?"; +} + +/* dump control and status registers */ +static void ohci_dump_status(ohci_t *controller) +{ + struct ohci_regs *regs = controller->regs; + __u32 temp; + + temp = readl(®s->revision) & 0xff; + if (temp != 0x10) + dbg("spec %d.%d", (temp >> 4), (temp & 0x0f)); + + temp = readl(®s->control); + dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, + (temp & OHCI_CTRL_RWE) ? " RWE" : "", + (temp & OHCI_CTRL_RWC) ? " RWC" : "", + (temp & OHCI_CTRL_IR) ? " IR" : "", + hcfs2string(temp & OHCI_CTRL_HCFS), + (temp & OHCI_CTRL_BLE) ? " BLE" : "", + (temp & OHCI_CTRL_CLE) ? " CLE" : "", + (temp & OHCI_CTRL_IE) ? " IE" : "", + (temp & OHCI_CTRL_PLE) ? " PLE" : "", + temp & OHCI_CTRL_CBSR + ); + + temp = readl(®s->cmdstatus); + dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, + (temp & OHCI_SOC) >> 16, + (temp & OHCI_OCR) ? " OCR" : "", + (temp & OHCI_BLF) ? " BLF" : "", + (temp & OHCI_CLF) ? " CLF" : "", + (temp & OHCI_HCR) ? " HCR" : "" + ); + + ohci_dump_intr_mask("intrstatus", readl(®s->intrstatus)); + ohci_dump_intr_mask("intrenable", readl(®s->intrenable)); + + maybe_print_eds("ed_periodcurrent", readl(®s->ed_periodcurrent)); + + maybe_print_eds("ed_controlhead", readl(®s->ed_controlhead)); + maybe_print_eds("ed_controlcurrent", readl(®s->ed_controlcurrent)); + + maybe_print_eds("ed_bulkhead", readl(®s->ed_bulkhead)); + maybe_print_eds("ed_bulkcurrent", readl(®s->ed_bulkcurrent)); + + maybe_print_eds("donehead", readl(®s->donehead)); +} + +static void ohci_dump_roothub(ohci_t *controller, int verbose) +{ + __u32 temp, ndp, i; + + temp = roothub_a(controller); + ndp = (temp & RH_A_NDP); +#ifdef CONFIG_AT91C_PQFP_UHPBUG + ndp = (ndp == 2) ? 1:0; +#endif + if (verbose) { + dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, + ((temp & RH_A_POTPGT) >> 24) & 0xff, + (temp & RH_A_NOCP) ? " NOCP" : "", + (temp & RH_A_OCPM) ? " OCPM" : "", + (temp & RH_A_DT) ? " DT" : "", + (temp & RH_A_NPS) ? " NPS" : "", + (temp & RH_A_PSM) ? " PSM" : "", + ndp + ); + temp = roothub_b(controller); + dbg("roothub.b: %08x PPCM=%04x DR=%04x", + temp, + (temp & RH_B_PPCM) >> 16, + (temp & RH_B_DR) + ); + temp = roothub_status(controller); + dbg("roothub.status: %08x%s%s%s%s%s%s", + temp, + (temp & RH_HS_CRWE) ? " CRWE" : "", + (temp & RH_HS_OCIC) ? " OCIC" : "", + (temp & RH_HS_LPSC) ? " LPSC" : "", + (temp & RH_HS_DRWE) ? " DRWE" : "", + (temp & RH_HS_OCI) ? " OCI" : "", + (temp & RH_HS_LPS) ? " LPS" : "" + ); + } + + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus(controller, i); + dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", + i, + temp, + (temp & RH_PS_PRSC) ? " PRSC" : "", + (temp & RH_PS_OCIC) ? " OCIC" : "", + (temp & RH_PS_PSSC) ? " PSSC" : "", + (temp & RH_PS_PESC) ? " PESC" : "", + (temp & RH_PS_CSC) ? " CSC" : "", + + (temp & RH_PS_LSDA) ? " LSDA" : "", + (temp & RH_PS_PPS) ? " PPS" : "", + (temp & RH_PS_PRS) ? " PRS" : "", + (temp & RH_PS_POCI) ? " POCI" : "", + (temp & RH_PS_PSS) ? " PSS" : "", + + (temp & RH_PS_PES) ? " PES" : "", + (temp & RH_PS_CCS) ? " CCS" : "" + ); + } +} + +static void ohci_dump(ohci_t *controller, int verbose) +{ + dbg("OHCI controller usb-%s state", controller->slot_name); + + /* dumps some of the state we know about */ + ohci_dump_status(controller); + if (verbose) + ep_print_int_eds(controller, "hcca"); + dbg("hcca frame #%04x", controller->hcca->frame_no); + ohci_dump_roothub(controller, 1); +} +#endif /* DEBUG */ + +/*-------------------------------------------------------------------------* + * Interface functions (URB) + *-------------------------------------------------------------------------*/ + +/* get a transfer request */ + +int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup) +{ + ohci_t *ohci; + ed_t *ed; + urb_priv_t *purb_priv = urb; + int i, size = 0; + struct usb_device *dev = urb->dev; + unsigned long pipe = urb->pipe; + void *buffer = urb->transfer_buffer; + int transfer_len = urb->transfer_buffer_length; + int interval = urb->interval; + + ohci = &gohci; + + /* when controller's hung, permit only roothub cleanup attempts + * such as powering down ports */ + if (ohci->disabled) { + err("sohci_submit_job: EPIPE"); + return -1; + } + + /* we're about to begin a new transaction here so mark the + * URB unfinished */ + urb->finished = 0; + + /* every endpoint has a ed, locate and fill it */ + ed = ep_add_ed(dev, pipe, interval, 1); + if (!ed) { + err("sohci_submit_job: ENOMEM"); + return -1; + } + + /* for the private part of the URB we need the number of TDs (size) */ + switch (usb_pipetype(pipe)) { + case PIPE_BULK: /* one TD for every 4096 Byte */ + size = (transfer_len - 1) / 4096 + 1; + break; + case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ + size = (transfer_len == 0)? 2: + (transfer_len - 1) / 4096 + 3; + break; + case PIPE_INTERRUPT: /* 1 TD */ + size = 1; + break; + } + + ed->purb = urb; + + if (size >= (N_URB_TD - 1)) { + err("need %d TDs, only have %d", size, N_URB_TD); + return -1; + } + purb_priv->pipe = pipe; + + /* fill the private part of the URB */ + purb_priv->length = size; + purb_priv->ed = ed; + purb_priv->actual_length = 0; + + /* allocate the TDs */ + /* note that td[0] was allocated in ep_add_ed */ + for (i = 0; i < size; i++) { + purb_priv->td[i] = td_alloc(dev); + if (!purb_priv->td[i]) { + purb_priv->length = i; + urb_free_priv(purb_priv); + err("sohci_submit_job: ENOMEM"); + return -1; + } + } + + if (ed->state == ED_NEW || (ed->state & ED_DEL)) { + urb_free_priv(purb_priv); + err("sohci_submit_job: EINVAL"); + return -1; + } + + /* link the ed into a chain if is not already */ + if (ed->state != ED_OPER) + ep_link(ohci, ed); + + /* fill the TDs and link it to the ed */ + td_submit_job(dev, pipe, buffer, transfer_len, + setup, purb_priv, interval); + + return 0; +} + +static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb) +{ + struct ohci_regs *regs = hc->regs; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + /* implicitly requeued */ + if (urb->dev->irq_handle && + (urb->dev->irq_act_len = urb->actual_length)) { + writel(OHCI_INTR_WDH, ®s->intrenable); + readl(®s->intrenable); /* PCI posting flush */ + urb->dev->irq_handle(urb->dev); + writel(OHCI_INTR_WDH, ®s->intrdisable); + readl(®s->intrdisable); /* PCI posting flush */ + } + urb->actual_length = 0; + td_submit_job( + urb->dev, + urb->pipe, + urb->transfer_buffer, + urb->transfer_buffer_length, + NULL, + urb, + urb->interval); + break; + case PIPE_CONTROL: + case PIPE_BULK: + break; + default: + return 0; + } + return 1; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +/* tell us the current USB frame number */ + +static int sohci_get_current_frame_number(struct usb_device *usb_dev) +{ + ohci_t *ohci = &gohci; + + return m16_swap(ohci->hcca->frame_no); +} +#endif + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +/* search for the right branch to insert an interrupt ed into the int tree + * do some load ballancing; + * returns the branch and + * sets the interval to interval = 2^integer (ld (interval)) */ + +static int ep_int_ballance(ohci_t *ohci, int interval, int load) +{ + int i, branch = 0; + + /* search for the least loaded interrupt endpoint + * branch of all 32 branches + */ + for (i = 0; i < 32; i++) + if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i]) + branch = i; + + branch = branch % interval; + for (i = branch; i < 32; i += interval) + ohci->ohci_int_load [i] += load; + + return branch; +} + +/*-------------------------------------------------------------------------*/ + +/* 2^int( ld (inter)) */ + +static int ep_2_n_interval(int inter) +{ + int i; + for (i = 0; ((inter >> i) > 1) && (i < 5); i++); + return 1 << i; +} + +/*-------------------------------------------------------------------------*/ + +/* the int tree is a binary tree + * in order to process it sequentially the indexes of the branches have to + * be mapped the mapping reverses the bits of a word of num_bits length */ +static int ep_rev(int num_bits, int word) +{ + int i, wout = 0; + + for (i = 0; i < num_bits; i++) + wout |= (((word >> i) & 1) << (num_bits - i - 1)); + return wout; +} + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +/* link an ed into one of the HC chains */ + +static int ep_link(ohci_t *ohci, ed_t *edi) +{ + volatile ed_t *ed = edi; + int int_branch; + int i; + int inter; + int interval; + int load; + __u32 *ed_p; + + ed->state = ED_OPER; + ed->int_interval = 0; + + switch (ed->type) { + case PIPE_CONTROL: + ed->hwNextED = 0; + if (ohci->ed_controltail == NULL) + writel(ed, &ohci->regs->ed_controlhead); + else + ohci->ed_controltail->hwNextED = + m32_swap((unsigned long)ed); + + ed->ed_prev = ohci->ed_controltail; + if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_CLE; + writel(ohci->hc_control, &ohci->regs->control); + } + ohci->ed_controltail = edi; + break; + + case PIPE_BULK: + ed->hwNextED = 0; + if (ohci->ed_bulktail == NULL) + writel(ed, &ohci->regs->ed_bulkhead); + else + ohci->ed_bulktail->hwNextED = + m32_swap((unsigned long)ed); + + ed->ed_prev = ohci->ed_bulktail; + if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_BLE; + writel(ohci->hc_control, &ohci->regs->control); + } + ohci->ed_bulktail = edi; + break; + + case PIPE_INTERRUPT: + load = ed->int_load; + interval = ep_2_n_interval(ed->int_period); + ed->int_interval = interval; + int_branch = ep_int_ballance(ohci, interval, load); + ed->int_branch = int_branch; + + for (i = 0; i < ep_rev(6, interval); i += inter) { + inter = 1; + for (ed_p = &(ohci->hcca->int_table[\ + ep_rev(5, i) + int_branch]); + (*ed_p != 0) && + (((ed_t *)ed_p)->int_interval >= interval); + ed_p = &(((ed_t *)ed_p)->hwNextED)) + inter = ep_rev(6, + ((ed_t *)ed_p)->int_interval); + ed->hwNextED = *ed_p; + *ed_p = m32_swap((unsigned long)ed); + } + break; + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* scan the periodic table to find and unlink this ED */ +static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed, + unsigned index, unsigned period) +{ + for (; index < NUM_INTS; index += period) { + __u32 *ed_p = &ohci->hcca->int_table [index]; + + /* ED might have been unlinked through another path */ + while (*ed_p != 0) { + if (((struct ed *) + m32_swap((unsigned long)ed_p)) == ed) { + *ed_p = ed->hwNextED; + break; + } + ed_p = &(((struct ed *) + m32_swap((unsigned long)ed_p))->hwNextED); + } + } +} + +/* unlink an ed from one of the HC chains. + * just the link to the ed is unlinked. + * the link from the ed still points to another operational ed or 0 + * so the HC can eventually finish the processing of the unlinked ed */ + +static int ep_unlink(ohci_t *ohci, ed_t *edi) +{ + volatile ed_t *ed = edi; + int i; + + ed->hwINFO |= m32_swap(OHCI_ED_SKIP); + + switch (ed->type) { + case PIPE_CONTROL: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_CLE; + writel(ohci->hc_control, &ohci->regs->control); + } + writel(m32_swap(*((__u32 *)&ed->hwNextED)), + &ohci->regs->ed_controlhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_controltail == ed) { + ohci->ed_controltail = ed->ed_prev; + } else { + ((ed_t *)m32_swap( + *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; + } + break; + + case PIPE_BULK: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_BLE; + writel(ohci->hc_control, &ohci->regs->control); + } + writel(m32_swap(*((__u32 *)&ed->hwNextED)), + &ohci->regs->ed_bulkhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_bulktail == ed) { + ohci->ed_bulktail = ed->ed_prev; + } else { + ((ed_t *)m32_swap( + *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; + } + break; + + case PIPE_INTERRUPT: + periodic_unlink(ohci, ed, 0, 1); + for (i = ed->int_branch; i < 32; i += ed->int_interval) + ohci->ohci_int_load[i] -= ed->int_load; + break; + } + ed->state = ED_UNLINK; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* add/reinit an endpoint; this should be done once at the + * usb_set_configuration command, but the USB stack is a little bit + * stateless so we do it at every transaction if the state of the ed + * is ED_NEW then a dummy td is added and the state is changed to + * ED_UNLINK in all other cases the state is left unchanged the ed + * info fields are setted anyway even though most of them should not + * change + */ +static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe, + int interval, int load) +{ + td_t *td; + ed_t *ed_ret; + volatile ed_t *ed; + + ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) | + (usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))]; + + if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { + err("ep_add_ed: pending delete"); + /* pending delete request */ + return NULL; + } + + if (ed->state == ED_NEW) { + /* dummy td; end of td list for ed */ + td = td_alloc(usb_dev); + ed->hwTailP = m32_swap((unsigned long)td); + ed->hwHeadP = ed->hwTailP; + ed->state = ED_UNLINK; + ed->type = usb_pipetype(pipe); + ohci_dev.ed_cnt++; + } + + ed->hwINFO = m32_swap(usb_pipedevice(pipe) + | usb_pipeendpoint(pipe) << 7 + | (usb_pipeisoc(pipe)? 0x8000: 0) + | (usb_pipecontrol(pipe)? 0: \ + (usb_pipeout(pipe)? 0x800: 0x1000)) + | usb_pipeslow(pipe) << 13 + | usb_maxpacket(usb_dev, pipe) << 16); + + if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) { + ed->int_period = interval; + ed->int_load = load; + } + + return ed_ret; +} + +/*-------------------------------------------------------------------------* + * TD handling functions + *-------------------------------------------------------------------------*/ + +/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ + +static void td_fill(ohci_t *ohci, unsigned int info, + void *data, int len, + struct usb_device *dev, int index, urb_priv_t *urb_priv) +{ + volatile td_t *td, *td_pt; +#ifdef OHCI_FILL_TRACE + int i; +#endif + + if (index > urb_priv->length) { + err("index > length"); + return; + } + /* use this td as the next dummy */ + td_pt = urb_priv->td [index]; + td_pt->hwNextTD = 0; + + /* fill the old dummy TD */ + td = urb_priv->td [index] = + (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf); + + td->ed = urb_priv->ed; + td->next_dl_td = NULL; + td->index = index; + td->data = (__u32)data; +#ifdef OHCI_FILL_TRACE + if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) { + for (i = 0; i < len; i++) + printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]); + printf("\n"); + } +#endif + if (!len) + data = 0; + + td->hwINFO = m32_swap(info); + td->hwCBP = m32_swap((unsigned long)data); + if (data) + td->hwBE = m32_swap((unsigned long)(data + len - 1)); + else + td->hwBE = 0; + + td->hwNextTD = m32_swap((unsigned long)td_pt); + + /* append to queue */ + td->ed->hwTailP = td->hwNextTD; +} + +/*-------------------------------------------------------------------------*/ + +/* prepare all TDs of a transfer */ + +static void td_submit_job(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, + struct devrequest *setup, urb_priv_t *urb, + int interval) +{ + ohci_t *ohci = &gohci; + int data_len = transfer_len; + void *data; + int cnt = 0; + __u32 info = 0; + unsigned int toggle = 0; + + /* OHCI handles the DATA-toggles itself, we just use the USB-toggle + * bits for reseting */ + if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { + toggle = TD_T_TOGGLE; + } else { + toggle = TD_T_DATA0; + usb_settoggle(dev, usb_pipeendpoint(pipe), + usb_pipeout(pipe), 1); + } + urb->td_cnt = 0; + if (data_len) + data = buffer; + else + data = 0; + + switch (usb_pipetype(pipe)) { + case PIPE_BULK: + info = usb_pipeout(pipe)? + TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; + while (data_len > 4096) { + td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), + data, 4096, dev, cnt, urb); + data += 4096; data_len -= 4096; cnt++; + } + info = usb_pipeout(pipe)? + TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; + td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data, + data_len, dev, cnt, urb); + cnt++; + + if (!ohci->sleeping) { + /* start bulk list */ + writel(OHCI_BLF, &ohci->regs->cmdstatus); + } + break; + + case PIPE_CONTROL: + /* Setup phase */ + info = TD_CC | TD_DP_SETUP | TD_T_DATA0; + td_fill(ohci, info, setup, 8, dev, cnt++, urb); + + /* Optional Data phase */ + if (data_len > 0) { + info = usb_pipeout(pipe)? + TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : + TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; + /* NOTE: mishandles transfers >8K, some >4K */ + td_fill(ohci, info, data, data_len, dev, cnt++, urb); + } + + /* Status phase */ + info = usb_pipeout(pipe)? + TD_CC | TD_DP_IN | TD_T_DATA1: + TD_CC | TD_DP_OUT | TD_T_DATA1; + td_fill(ohci, info, data, 0, dev, cnt++, urb); + + if (!ohci->sleeping) { + /* start Control list */ + writel(OHCI_CLF, &ohci->regs->cmdstatus); + } + break; + + case PIPE_INTERRUPT: + info = usb_pipeout(urb->pipe)? + TD_CC | TD_DP_OUT | toggle: + TD_CC | TD_R | TD_DP_IN | toggle; + td_fill(ohci, info, data, data_len, dev, cnt++, urb); + break; + } + if (urb->length != cnt) + dbg("TD LENGTH %d != CNT %d", urb->length, cnt); +} + +/*-------------------------------------------------------------------------* + * Done List handling functions + *-------------------------------------------------------------------------*/ + +/* calculate the transfer length and update the urb */ + +static void dl_transfer_length(td_t *td) +{ + __u32 tdINFO, tdBE, tdCBP; + urb_priv_t *lurb_priv = td->ed->purb; + + tdINFO = m32_swap(td->hwINFO); + tdBE = m32_swap(td->hwBE); + tdCBP = m32_swap(td->hwCBP); + + if (!(usb_pipecontrol(lurb_priv->pipe) && + ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { + if (tdBE != 0) { + if (td->hwCBP == 0) + lurb_priv->actual_length += tdBE - td->data + 1; + else + lurb_priv->actual_length += tdCBP - td->data; + } + } +} + +/*-------------------------------------------------------------------------*/ +static void check_status(td_t *td_list) +{ + urb_priv_t *lurb_priv = td_list->ed->purb; + int urb_len = lurb_priv->length; + __u32 *phwHeadP = &td_list->ed->hwHeadP; + int cc; + + cc = TD_CC_GET(m32_swap(td_list->hwINFO)); + if (cc) { + err(" USB-error: %s (%x)", cc_to_string[cc], cc); + + if (*phwHeadP & m32_swap(0x1)) { + if (lurb_priv && + ((td_list->index + 1) < urb_len)) { + *phwHeadP = + (lurb_priv->td[urb_len - 1]->hwNextTD &\ + m32_swap(0xfffffff0)) | + (*phwHeadP & m32_swap(0x2)); + + lurb_priv->td_cnt += urb_len - + td_list->index - 1; + } else + *phwHeadP &= m32_swap(0xfffffff2); + } +#ifdef CONFIG_MPC5200 + td_list->hwNextTD = 0; +#endif + } +} + +/* replies to the request have to be on a FIFO basis so + * we reverse the reversed done-list */ +static td_t *dl_reverse_done_list(ohci_t *ohci) +{ + __u32 td_list_hc; + td_t *td_rev = NULL; + td_t *td_list = NULL; + + td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0; + ohci->hcca->done_head = 0; + + while (td_list_hc) { + td_list = (td_t *)td_list_hc; + check_status(td_list); + td_list->next_dl_td = td_rev; + td_rev = td_list; + td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0; + } + return td_list; +} + +/*-------------------------------------------------------------------------*/ +/*-------------------------------------------------------------------------*/ + +static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status) +{ + if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL)) + urb->finished = sohci_return_job(ohci, urb); + else + dbg("finish_urb: strange.., ED state %x, \n", status); +} + +/* + * Used to take back a TD from the host controller. This would normally be + * called from within dl_done_list, however it may be called directly if the + * HC no longer sees the TD and it has not appeared on the donelist (after + * two frames). This bug has been observed on ZF Micro systems. + */ +static int takeback_td(ohci_t *ohci, td_t *td_list) +{ + ed_t *ed; + int cc; + int stat = 0; + /* urb_t *urb; */ + urb_priv_t *lurb_priv; + __u32 tdINFO, edHeadP, edTailP; + + tdINFO = m32_swap(td_list->hwINFO); + + ed = td_list->ed; + lurb_priv = ed->purb; + + dl_transfer_length(td_list); + + lurb_priv->td_cnt++; + + /* error code of transfer */ + cc = TD_CC_GET(tdINFO); + if (cc) { + err("USB-error: %s (%x)", cc_to_string[cc], cc); + stat = cc_to_error[cc]; + } + + /* see if this done list makes for all TD's of current URB, + * and mark the URB finished if so */ + if (lurb_priv->td_cnt == lurb_priv->length) + finish_urb(ohci, lurb_priv, ed->state); + + dbg("dl_done_list: processing TD %x, len %x\n", + lurb_priv->td_cnt, lurb_priv->length); + + if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) { + edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0; + edTailP = m32_swap(ed->hwTailP); + + /* unlink eds if they are not busy */ + if ((edHeadP == edTailP) && (ed->state == ED_OPER)) + ep_unlink(ohci, ed); + } + return stat; +} + +static int dl_done_list(ohci_t *ohci) +{ + int stat = 0; + td_t *td_list = dl_reverse_done_list(ohci); + + while (td_list) { + td_t *td_next = td_list->next_dl_td; + stat = takeback_td(ohci, td_list); + td_list = td_next; + } + return stat; +} + +/*-------------------------------------------------------------------------* + * Virtual Root Hub + *-------------------------------------------------------------------------*/ + +/* Device descriptor */ +static __u8 root_hub_dev_des[] = +{ + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x10, /* __u16 bcdUSB; v1.1 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x00, /* __u8 iManufacturer; */ + 0x01, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* Configuration descriptor */ +static __u8 root_hub_config_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ + 0x00, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + +static unsigned char root_hub_str_index0[] = +{ + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = +{ + 28, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'O', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'C', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + +/* Hub class-specific descriptor is constructed dynamically */ + +/*-------------------------------------------------------------------------*/ + +#define OK(x) len = (x); break +#ifdef DEBUG +#define WR_RH_STAT(x) {info("WR:status %#8x", (x)); writel((x), \ + &gohci.regs->roothub.status); } +#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \ + (x)); writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); } +#else +#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status) +#define WR_RH_PORTSTAT(x) writel((x), \ + &gohci.regs->roothub.portstatus[wIndex-1]) +#endif +#define RD_RH_STAT roothub_status(&gohci) +#define RD_RH_PORTSTAT roothub_portstatus(&gohci, wIndex-1) + +/* request to virtual root hub */ + +int rh_check_port_status(ohci_t *controller) +{ + __u32 temp, ndp, i; + int res; + + res = -1; + temp = roothub_a(controller); + ndp = (temp & RH_A_NDP); +#ifdef CONFIG_AT91C_PQFP_UHPBUG + ndp = (ndp == 2) ? 1:0; +#endif + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus(controller, i); + /* check for a device disconnect */ + if (((temp & (RH_PS_PESC | RH_PS_CSC)) == + (RH_PS_PESC | RH_PS_CSC)) && + ((temp & RH_PS_CCS) == 0)) { + res = i; + break; + } + } + return res; +} + +static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, struct devrequest *cmd) +{ + void *data = buffer; + int leni = transfer_len; + int len = 0; + int stat = 0; + __u32 datab[4]; + __u8 *data_buf = (__u8 *)datab; + __u16 bmRType_bReq; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + +#ifdef DEBUG +pkt_print(NULL, dev, pipe, buffer, transfer_len, + cmd, "SUB(rh)", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (usb_pipeint(pipe)) { + info("Root-Hub submit IRQ: NOT implemented"); + return 0; + } + + bmRType_bReq = cmd->requesttype | (cmd->request << 8); + wValue = le16_to_cpu(cmd->value); + wIndex = le16_to_cpu(cmd->index); + wLength = le16_to_cpu(cmd->length); + + info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", + dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); + + switch (bmRType_bReq) { + /* Request Destination: + without flags: Device, + RH_INTERFACE: interface, + RH_ENDPOINT: endpoint, + RH_CLASS means HUB here, + RH_OTHER | RH_CLASS almost ever means HUB_PORT here + */ + + case RH_GET_STATUS: + *(__u16 *) data_buf = cpu_to_le16(1); + OK(2); + case RH_GET_STATUS | RH_INTERFACE: + *(__u16 *) data_buf = cpu_to_le16(0); + OK(2); + case RH_GET_STATUS | RH_ENDPOINT: + *(__u16 *) data_buf = cpu_to_le16(0); + OK(2); + case RH_GET_STATUS | RH_CLASS: + *(__u32 *) data_buf = cpu_to_le32( + RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); + OK(4); + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + *(__u32 *) data_buf = cpu_to_le32(RD_RH_PORTSTAT); + OK(4); + + case RH_CLEAR_FEATURE | RH_ENDPOINT: + switch (wValue) { + case (RH_ENDPOINT_STALL): + OK(0); + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + switch (wValue) { + case RH_C_HUB_LOCAL_POWER: + OK(0); + case (RH_C_HUB_OVER_CURRENT): + WR_RH_STAT(RH_HS_OCIC); + OK(0); + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + switch (wValue) { + case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0); + case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0); + case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0); + case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0); + case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0); + case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0); + case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0); + case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0); + } + break; + + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + switch (wValue) { + case (RH_PORT_SUSPEND): + WR_RH_PORTSTAT(RH_PS_PSS); OK(0); + case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ + if (RD_RH_PORTSTAT & RH_PS_CCS) + WR_RH_PORTSTAT(RH_PS_PRS); + OK(0); + case (RH_PORT_POWER): + WR_RH_PORTSTAT(RH_PS_PPS); + wait_ms(100); + OK(0); + case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ + if (RD_RH_PORTSTAT & RH_PS_CCS) + WR_RH_PORTSTAT(RH_PS_PES); + OK(0); + } + break; + + case RH_SET_ADDRESS: + gohci.rh.devnum = wValue; + OK(0); + + case RH_GET_DESCRIPTOR: + switch ((wValue & 0xff00) >> 8) { + case (0x01): /* device descriptor */ + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof(root_hub_dev_des), + wLength)); + data_buf = root_hub_dev_des; OK(len); + case (0x02): /* configuration descriptor */ + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof(root_hub_config_des), + wLength)); + data_buf = root_hub_config_des; OK(len); + case (0x03): /* string descriptors */ + if (wValue == 0x0300) { + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof(root_hub_str_index0), + wLength)); + data_buf = root_hub_str_index0; + OK(len); + } + if (wValue == 0x0301) { + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof(root_hub_str_index1), + wLength)); + data_buf = root_hub_str_index1; + OK(len); + } + default: + stat = USB_ST_STALLED; + } + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + { + __u32 temp = roothub_a(&gohci); + + data_buf [0] = 9; /* min length; */ + data_buf [1] = 0x29; + data_buf [2] = temp & RH_A_NDP; +#ifdef CONFIG_AT91C_PQFP_UHPBUG + data_buf [2] = (data_buf [2] == 2) ? 1:0; +#endif + data_buf [3] = 0; + if (temp & RH_A_PSM) /* per-port power switching? */ + data_buf [3] |= 0x1; + if (temp & RH_A_NOCP) /* no overcurrent reporting? */ + data_buf [3] |= 0x10; + else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */ + data_buf [3] |= 0x8; + + /* corresponds to data_buf[4-7] */ + datab [1] = 0; + data_buf [5] = (temp & RH_A_POTPGT) >> 24; + temp = roothub_b(&gohci); + data_buf [7] = temp & RH_B_DR; + if (data_buf [2] < 7) { + data_buf [8] = 0xff; + } else { + data_buf [0] += 2; + data_buf [8] = (temp & RH_B_DR) >> 8; + data_buf [10] = data_buf [9] = 0xff; + } + + len = min_t(unsigned int, leni, + min_t(unsigned int, data_buf [0], wLength)); + OK(len); + } + + case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK(1); + + case RH_SET_CONFIGURATION: WR_RH_STAT(0x10000); OK(0); + + default: + dbg("unsupported root hub command"); + stat = USB_ST_STALLED; + } + +#ifdef DEBUG + ohci_dump_roothub(&gohci, 1); +#else + wait_ms(1); +#endif + + len = min_t(int, len, leni); + if (data != data_buf) + memcpy(data, data_buf, len); + dev->act_len = len; + dev->status = stat; + +#ifdef DEBUG + pkt_print(NULL, dev, pipe, buffer, + transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); +#else + wait_ms(1); +#endif + + return stat; +} + +/*-------------------------------------------------------------------------*/ + +/* common code for handling submit messages - used for all but root hub */ +/* accesses. */ +int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, int interval) +{ + int stat = 0; + int maxsize = usb_maxpacket(dev, pipe); + int timeout; + urb_priv_t *urb; + + urb = malloc(sizeof(urb_priv_t)); + memset(urb, 0, sizeof(urb_priv_t)); + + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = buffer; + urb->transfer_buffer_length = transfer_len; + urb->interval = interval; + + /* device pulled? Shortcut the action. */ + if (devgone == dev) { + dev->status = USB_ST_CRC_ERR; + return 0; + } + +#ifdef DEBUG + urb->actual_length = 0; + pkt_print(urb, dev, pipe, buffer, transfer_len, + setup, "SUB", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (!maxsize) { + err("submit_common_message: pipesize for pipe %lx is zero", + pipe); + return -1; + } + + if (sohci_submit_job(urb, setup) < 0) { + err("sohci_submit_job failed"); + return -1; + } + +#if 0 + wait_ms(10); + /* ohci_dump_status(&gohci); */ +#endif + + /* allow more time for a BULK device to react - some are slow */ +#define BULK_TO 5000 /* timeout in milliseconds */ + if (usb_pipebulk(pipe)) + timeout = BULK_TO; + else + timeout = 100; + + /* wait for it to complete */ + for (;;) { + /* check whether the controller is done */ + stat = hc_interrupt(); + if (stat < 0) { + stat = USB_ST_CRC_ERR; + break; + } + + /* NOTE: since we are not interrupt driven in U-Boot and always + * handle only one URB at a time, we cannot assume the + * transaction finished on the first successful return from + * hc_interrupt().. unless the flag for current URB is set, + * meaning that all TD's to/from device got actually + * transferred and processed. If the current URB is not + * finished we need to re-iterate this loop so as + * hc_interrupt() gets called again as there needs to be some + * more TD's to process still */ + if ((stat >= 0) && (stat != 0xff) && (urb->finished)) { + /* 0xff is returned for an SF-interrupt */ + break; + } + + if (--timeout) { + wait_ms(1); + if (!urb->finished) + dbg("*"); + + } else { + err("CTL:TIMEOUT "); + dbg("submit_common_msg: TO status %x\n", stat); + urb->finished = 1; + stat = USB_ST_CRC_ERR; + break; + } + } + + dev->status = stat; + dev->act_len = transfer_len; + +#ifdef DEBUG + pkt_print(urb, dev, pipe, buffer, transfer_len, + setup, "RET(ctlr)", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + + /* free TDs in urb_priv */ + if (!usb_pipeint(pipe)) + urb_free_priv(urb); + return 0; +} + +/* submit routines called from usb.c */ +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len) +{ + info("submit_bulk_msg"); + return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0); +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup) +{ + int maxsize = usb_maxpacket(dev, pipe); + + info("submit_control_msg"); +#ifdef DEBUG + pkt_print(NULL, dev, pipe, buffer, transfer_len, + setup, "SUB", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (!maxsize) { + err("submit_control_message: pipesize for pipe %lx is zero", + pipe); + return -1; + } + if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) { + gohci.rh.dev = dev; + /* root hub - redirect */ + return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len, + setup); + } + + return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0); +} + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, int interval) +{ + info("submit_int_msg"); + return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, + interval); +} + +/*-------------------------------------------------------------------------* + * HC functions + *-------------------------------------------------------------------------*/ + +/* reset the HC and BUS */ + +static int hc_reset(ohci_t *ohci) +{ +#ifdef CONFIG_PCI_EHCI_DEVNO + pci_dev_t pdev; +#endif + int timeout = 30; + int smm_timeout = 50; /* 0,5 sec */ + + dbg("%s\n", __FUNCTION__); + +#ifdef CONFIG_PCI_EHCI_DEVNO + /* + * Some multi-function controllers (e.g. ISP1562) allow root hub + * resetting via EHCI registers only. + */ + pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO); + if (pdev != -1) { + u32 base; + int timeout = 1000; + + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); + writel(readl(base + EHCI_USBCMD_OFF) | EHCI_USBCMD_HCRESET, + base + EHCI_USBCMD_OFF); + + while (readl(base + EHCI_USBCMD_OFF) & EHCI_USBCMD_HCRESET) { + if (timeout-- <= 0) { + printf("USB RootHub reset timed out!"); + break; + } + udelay(1); + } + } else + printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO); +#endif + if (readl(&ohci->regs->control) & OHCI_CTRL_IR) { + /* SMM owns the HC */ + writel(OHCI_OCR, &ohci->regs->cmdstatus);/* request ownership */ + info("USB HC TakeOver from SMM"); + while (readl(&ohci->regs->control) & OHCI_CTRL_IR) { + wait_ms(10); + if (--smm_timeout == 0) { + err("USB HC TakeOver failed!"); + return -1; + } + } + } + + /* Disable HC interrupts */ + writel(OHCI_INTR_MIE, &ohci->regs->intrdisable); + + dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n", + ohci->slot_name, + readl(&ohci->regs->control)); + + /* Reset USB (needed by some controllers) */ + ohci->hc_control = 0; + writel(ohci->hc_control, &ohci->regs->control); + + /* HC Reset requires max 10 us delay */ + writel(OHCI_HCR, &ohci->regs->cmdstatus); + while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { + if (--timeout == 0) { + err("USB HC reset timed out!"); + return -1; + } + udelay(1); + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* Start an OHCI controller, set the BUS operational + * enable interrupts + * connect the virtual root hub */ + +static int hc_start(ohci_t *ohci) +{ + __u32 mask; + unsigned int fminterval; + + ohci->disabled = 1; + + /* Tell the controller where the control and bulk lists are + * The lists are empty now. */ + + writel(0, &ohci->regs->ed_controlhead); + writel(0, &ohci->regs->ed_bulkhead); + + writel((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */ + + fminterval = 0x2edf; + writel((fminterval * 9) / 10, &ohci->regs->periodicstart); + fminterval |= ((((fminterval - 210) * 6) / 7) << 16); + writel(fminterval, &ohci->regs->fminterval); + writel(0x628, &ohci->regs->lsthresh); + + /* start controller operations */ + ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; + ohci->disabled = 0; + writel(ohci->hc_control, &ohci->regs->control); + + /* disable all interrupts */ + mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | + OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | + OHCI_INTR_OC | OHCI_INTR_MIE); + writel(mask, &ohci->regs->intrdisable); + /* clear all interrupts */ + mask &= ~OHCI_INTR_MIE; + writel(mask, &ohci->regs->intrstatus); + /* Choose the interrupts we care about now - but w/o MIE */ + mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; + writel(mask, &ohci->regs->intrenable); + +#ifdef OHCI_USE_NPS + /* required for AMD-756 and some Mac platforms */ + writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM, + &ohci->regs->roothub.a); + writel(RH_HS_LPSC, &ohci->regs->roothub.status); +#endif /* OHCI_USE_NPS */ + +#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); }) + /* POTPGT delay is bits 24-31, in 2 ms units. */ + mdelay((roothub_a(ohci) >> 23) & 0x1fe); + + /* connect the virtual root hub */ + ohci->rh.devnum = 0; + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* Poll USB interrupt. */ +void usb_event_poll(void) +{ + hc_interrupt(); +} + +/* an interrupt happens */ + +static int hc_interrupt(void) +{ + ohci_t *ohci = &gohci; + struct ohci_regs *regs = ohci->regs; + int ints; + int stat = -1; + + if ((ohci->hcca->done_head != 0) && + !(m32_swap(ohci->hcca->done_head) & 0x01)) { + ints = OHCI_INTR_WDH; + } else { + ints = readl(®s->intrstatus); + if (ints == ~(u32)0) { + ohci->disabled++; + err("%s device removed!", ohci->slot_name); + return -1; + } else { + ints &= readl(®s->intrenable); + if (ints == 0) { + dbg("hc_interrupt: returning..\n"); + return 0xff; + } + } + } + + /* dbg("Interrupt: %x frame: %x", ints, + le16_to_cpu(ohci->hcca->frame_no)); */ + + if (ints & OHCI_INTR_RHSC) + stat = 0xff; + + if (ints & OHCI_INTR_UE) { + ohci->disabled++; + err("OHCI Unrecoverable Error, controller usb-%s disabled", + ohci->slot_name); + /* e.g. due to PCI Master/Target Abort */ + +#ifdef DEBUG + ohci_dump(ohci, 1); +#else + wait_ms(1); +#endif + /* FIXME: be optimistic, hope that bug won't repeat often. */ + /* Make some non-interrupt context restart the controller. */ + /* Count and limit the retries though; either hardware or */ + /* software errors can go forever... */ + hc_reset(ohci); + return -1; + } + + if (ints & OHCI_INTR_WDH) { + wait_ms(1); + writel(OHCI_INTR_WDH, ®s->intrdisable); + (void)readl(®s->intrdisable); /* flush */ + stat = dl_done_list(&gohci); + writel(OHCI_INTR_WDH, ®s->intrenable); + (void)readl(®s->intrdisable); /* flush */ + } + + if (ints & OHCI_INTR_SO) { + dbg("USB Schedule overrun\n"); + writel(OHCI_INTR_SO, ®s->intrenable); + stat = -1; + } + + /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ + if (ints & OHCI_INTR_SF) { + unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1; + wait_ms(1); + writel(OHCI_INTR_SF, ®s->intrdisable); + if (ohci->ed_rm_list[frame] != NULL) + writel(OHCI_INTR_SF, ®s->intrenable); + stat = 0xff; + } + + writel(ints, ®s->intrstatus); + return stat; +} + +/*-------------------------------------------------------------------------*/ + +/*-------------------------------------------------------------------------*/ + +/* De-allocate all resources.. */ + +static void hc_release_ohci(ohci_t *ohci) +{ + dbg("USB HC release ohci usb-%s", ohci->slot_name); + + if (!ohci->disabled) + hc_reset(ohci); +} + +/*-------------------------------------------------------------------------*/ + +/* + * low level initalisation routine, called from usb.c + */ +static char ohci_inited = 0; + +int usb_lowlevel_init(void) +{ +#ifdef CONFIG_PCI_OHCI + pci_dev_t pdev; +#endif + +#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT + /* cpu dependant init */ + if (usb_cpu_init()) + return -1; +#endif + +#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT + /* board dependant init */ + if (usb_board_init()) + return -1; +#endif + memset(&gohci, 0, sizeof(ohci_t)); + + /* align the storage */ + if ((__u32)&ghcca[0] & 0xff) { + err("HCCA not aligned!!"); + return -1; + } + phcca = &ghcca[0]; + info("aligned ghcca %p", phcca); + memset(&ohci_dev, 0, sizeof(struct ohci_device)); + if ((__u32)&ohci_dev.ed[0] & 0x7) { + err("EDs not aligned!!"); + return -1; + } + memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1)); + if ((__u32)gtd & 0x7) { + err("TDs not aligned!!"); + return -1; + } + ptd = gtd; + gohci.hcca = phcca; + memset(phcca, 0, sizeof(struct ohci_hcca)); + + gohci.disabled = 1; + gohci.sleeping = 0; + gohci.irq = -1; +#ifdef CONFIG_PCI_OHCI + pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO); + + if (pdev != -1) { + u16 vid, did; + u32 base; + pci_read_config_word(pdev, PCI_VENDOR_ID, &vid); + pci_read_config_word(pdev, PCI_DEVICE_ID, &did); + printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n", + vid, did, (pdev >> 16) & 0xff, + (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7); + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); + printf("OHCI regs address 0x%08x\n", base); + gohci.regs = (struct ohci_regs *)base; + } else + return -1; +#else + gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE; +#endif + + gohci.flags = 0; + gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME; + + if (hc_reset (&gohci) < 0) { + hc_release_ohci (&gohci); + err ("can't reset usb-%s", gohci.slot_name); +#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + usb_board_init_fail(); +#endif + +#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + usb_cpu_init_fail(); +#endif + return -1; + } + + if (hc_start(&gohci) < 0) { + err("can't start usb-%s", gohci.slot_name); + hc_release_ohci(&gohci); + /* Initialization failed */ +#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + usb_board_stop(); +#endif + +#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + usb_cpu_stop(); +#endif + return -1; + } + +#ifdef DEBUG + ohci_dump(&gohci, 1); +#else + wait_ms(1); +#endif + ohci_inited = 1; + return 0; +} + +int usb_lowlevel_stop(void) +{ + /* this gets called really early - before the controller has */ + /* even been initialized! */ + if (!ohci_inited) + return 0; + /* TODO release any interrupts, etc. */ + /* call hc_release_ohci() here ? */ + hc_reset(&gohci); + +#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + if (usb_board_stop()) + return -1; +#endif + +#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + if (usb_cpu_stop()) + return -1; +#endif + /* This driver is no longer initialised. It needs a new low-level + * init (board/cpu) before it can be used again. */ + ohci_inited = 0; + return 0; +} |