summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-mx7.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-mx7.c')
-rw-r--r--drivers/usb/host/ehci-mx7.c103
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-mx7.c b/drivers/usb/host/ehci-mx7.c
new file mode 100644
index 0000000..7429d62
--- /dev/null
+++ b/drivers/usb/host/ehci-mx7.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <errno.h>
+#include <linux/compiler.h>
+#include <usb/ehci-fsl.h>
+#include <asm/io.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/imx-common/iomux-v3.h>
+
+#include "ehci.h"
+
+#define USB_NC_OFFSET 0x200
+
+#define UCTRL_PM (1 << 9) /* OTG Power Mask */
+#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */
+#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */
+
+/* USBCMD */
+#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
+#define UCMD_RESET (1 << 1) /* controller reset */
+
+/* Base address for this IP block is 0x02184800 */
+struct usbnc_regs {
+ u32 ctrl1;
+ u32 ctrl2;
+ u32 reserve1[11];
+ u32 phy_ctrl2;
+ u32 reserve2[6];
+ u32 adp_cfg1;
+ u32 reserve3;
+ u32 adp_status;
+};
+
+static void usb_oc_config(int index)
+{
+ struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
+ (0x10000 * index) + USB_NC_OFFSET);
+ void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl1);
+ u32 val;
+
+ val = __raw_readl(ctrl);
+ val |= UCTRL_OVER_CUR_POL;
+ __raw_writel(val, ctrl);
+
+ val = __raw_readl(ctrl);
+ val |= (UCTRL_OVER_CUR_DIS | UCTRL_PM);
+ __raw_writel(val, ctrl);
+}
+
+int __weak board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+
+int __weak board_ehci_power(int port, int on)
+{
+ return 0;
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
+ (0x10000 * index));
+
+ if (index > 3)
+ return -EINVAL;
+ enable_usboh3_clk(1);
+ mdelay(1);
+
+ /* Do board specific initialization */
+ board_ehci_hcd_init(index);
+
+ usb_oc_config(index);
+
+ *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+ board_ehci_power(index, (init == USB_INIT_DEVICE) ? 0 : 1);
+ if (init == USB_INIT_DEVICE)
+ return 0;
+ setbits_le32(&ehci->usbmode, CM_HOST);
+ __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+ setbits_le32(&ehci->portsc, USB_EN);
+
+ mdelay(10);
+
+ return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}