diff options
Diffstat (limited to 'drivers/usb/gadget/omap1510_udc.c')
| -rw-r--r-- | drivers/usb/gadget/omap1510_udc.c | 1567 |
1 files changed, 1567 insertions, 0 deletions
diff --git a/drivers/usb/gadget/omap1510_udc.c b/drivers/usb/gadget/omap1510_udc.c new file mode 100644 index 0000000..90f7907 --- /dev/null +++ b/drivers/usb/gadget/omap1510_udc.c @@ -0,0 +1,1567 @@ +/* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * + * Based on + * linux/drivers/usb/device/bi/omap.c + * TI OMAP1510 USB bus interface driver + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * (C) Copyright 2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/io.h> +#ifdef CONFIG_OMAP_SX1 +#include <i2c.h> +#endif +#include <usbdevice.h> +#include <usb/omap1510_udc.h> + +#include "ep0.h" + + +#define UDC_INIT_MDELAY 80 /* Device settle delay */ +#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */ + +/* Some kind of debugging output... */ +#if 1 +#define UDCDBG(str) +#define UDCDBGA(fmt,args...) +#else /* The bugs still exists... */ +#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__) +#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args) +#endif + +#if 1 +#define UDCREG(name) +#define UDCREGL(name) +#else /* The bugs still exists... */ +#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */ +#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */ +#endif + + +static struct urb *ep0_urb = NULL; + +static struct usb_device_instance *udc_device; /* Used in interrupt handler */ +static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */ +static u32 udc_interrupts = 0; + +static void udc_stall_ep (unsigned int ep_addr); + + +static struct usb_endpoint_instance *omap1510_find_ep (int ep) +{ + int i; + + for (i = 0; i < udc_device->bus->max_endpoints; i++) { + if (udc_device->bus->endpoint_array[i].endpoint_address == ep) + return &udc_device->bus->endpoint_array[i]; + } + return NULL; +} + +/* ************************************************************************** */ +/* IO + */ + +/* + * omap1510_prepare_endpoint_for_rx + * + * This function implements TRM Figure 14-11. + * + * The endpoint to prepare for transfer is specified as a physical endpoint + * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint + * configuration register is checked to see if the endpoint is ISO or not. + * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled. + * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30. + */ +static void omap1510_prepare_endpoint_for_rx (int ep_addr) +{ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr); + if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { + if ((inw (UDC_EP_RX (ep_num)) & + (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) == + UDC_EPn_RX_Valid) { + /* rx endpoint is valid, non-ISO, so enable its FIFO */ + outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); + outw (UDC_Set_FIFO_En, UDC_CTRL); + outw (0, UDC_EP_NUM); + } + } +} + +/* omap1510_configure_endpoints + * + * This function implements TRM Figure 14-10. + */ +static void omap1510_configure_endpoints (struct usb_device_instance *device) +{ + int ep; + struct usb_bus_instance *bus; + struct usb_endpoint_instance *endpoint; + unsigned short ep_ptr; + unsigned short ep_size; + unsigned short ep_isoc; + unsigned short ep_doublebuffer; + int ep_addr; + int packet_size; + int buffer_size; + int attributes; + + bus = device->bus; + + /* There is a dedicated 2048 byte buffer for USB packets that may be + * arbitrarily partitioned among the endpoints on 8-byte boundaries. + * The first 8 bytes are reserved for receiving setup packets on + * endpoint 0. + */ + ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */ + + for (ep = 0; ep < bus->max_endpoints; ep++) { + endpoint = bus->endpoint_array + ep; + ep_addr = endpoint->endpoint_address; + if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + /* IN endpoint */ + packet_size = endpoint->tx_packetSize; + attributes = endpoint->tx_attributes; + } else { + /* OUT endpoint */ + packet_size = endpoint->rcv_packetSize; + attributes = endpoint->rcv_attributes; + } + + switch (packet_size) { + case 0: + ep_size = 0; + break; + case 8: + ep_size = 0; + break; + case 16: + ep_size = 1; + break; + case 32: + ep_size = 2; + break; + case 64: + ep_size = 3; + break; + case 128: + ep_size = 4; + break; + case 256: + ep_size = 5; + break; + case 512: + ep_size = 6; + break; + default: + UDCDBGA ("ep 0x%02x has bad packet size %d", + ep_addr, packet_size); + packet_size = 0; + ep_size = 0; + break; + } + + switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + default: + /* A non-isochronous endpoint may optionally be + * double-buffered. For now we disable + * double-buffering. + */ + ep_doublebuffer = 0; + ep_isoc = 0; + if (packet_size > 64) + packet_size = 0; + if (!ep || !ep_doublebuffer) + buffer_size = packet_size; + else + buffer_size = packet_size * 2; + break; + case USB_ENDPOINT_XFER_ISOC: + /* Isochronous endpoints are always double- + * buffered, but the double-buffering bit + * in the endpoint configuration register + * becomes the msb of the endpoint size so we + * set the double-buffering flag to zero. + */ + ep_doublebuffer = 0; + ep_isoc = 1; + buffer_size = packet_size * 2; + break; + } + + /* check to see if our packet buffer RAM is exhausted */ + if ((ep_ptr + buffer_size) > 2048) { + UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size); + buffer_size = packet_size = 0; + } + + /* force a default configuration for endpoint 0 since it is + * always enabled + */ + if (!ep && ((packet_size < 8) || (packet_size > 64))) { + buffer_size = packet_size = 64; + ep_size = 3; + } + + if (!ep) { + /* configure endpoint 0 */ + outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0); + /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */ + /* ep_ptr, packet_size); */ + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + /* IN endpoint */ + if (packet_size) { + outw ((1 << 15) | (ep_doublebuffer << 14) | + (ep_size << 12) | (ep_isoc << 11) | + (ep_ptr >> 3), + UDC_EP_TX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + UDCDBGA ("IN ep %d buffer offset 0x%03x" + " packet size 0x%03x", + ep_addr & USB_ENDPOINT_NUMBER_MASK, + ep_ptr, packet_size); + } else { + outw (0, + UDC_EP_TX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + } + } else { + /* OUT endpoint */ + if (packet_size) { + outw ((1 << 15) | (ep_doublebuffer << 14) | + (ep_size << 12) | (ep_isoc << 11) | + (ep_ptr >> 3), + UDC_EP_RX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + UDCDBGA ("OUT ep %d buffer offset 0x%03x" + " packet size 0x%03x", + ep_addr & USB_ENDPOINT_NUMBER_MASK, + ep_ptr, packet_size); + } else { + outw (0, + UDC_EP_RX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + } + } + ep_ptr += buffer_size; + } +} + +/* omap1510_deconfigure_device + * + * This function balances omap1510_configure_device. + */ +static void omap1510_deconfigure_device (void) +{ + int epnum; + + UDCDBG ("clear Cfg_Lock"); + outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1); + UDCREG (UDC_SYSCON1); + + /* deconfigure all endpoints */ + for (epnum = 1; epnum <= 15; epnum++) { + outw (0, UDC_EP_RX (epnum)); + outw (0, UDC_EP_TX (epnum)); + } +} + +/* omap1510_configure_device + * + * This function implements TRM Figure 14-9. + */ +static void omap1510_configure_device (struct usb_device_instance *device) +{ + omap1510_configure_endpoints (device); + + + /* Figure 14-9 indicates we should enable interrupts here, but we have + * other routines (udc_all_interrupts, udc_suspended_interrupts) to + * do that. + */ + + UDCDBG ("set Cfg_Lock"); + outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1); + UDCREG (UDC_SYSCON1); +} + +/* omap1510_write_noniso_tx_fifo + * + * This function implements TRM Figure 14-30. + * + * If the endpoint has an active tx_urb, then the next packet of data from the + * URB is written to the tx FIFO. The total amount of data in the urb is given + * by urb->actual_length. The maximum amount of data that can be sent in any + * one packet is given by endpoint->tx_packetSize. The number of data bytes + * from this URB that have already been transmitted is given by endpoint->sent. + * endpoint->last is updated by this routine with the number of data bytes + * transmitted in this packet. + * + * In accordance with Figure 14-30, the EP_NUM register must already have been + * written with the value to select the appropriate tx FIFO before this routine + * is called. + */ +static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance + *endpoint) +{ + struct urb *urb = endpoint->tx_urb; + + if (urb) { + unsigned int last, i; + + UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d", + urb->buffer, urb->buffer_length, urb->actual_length); + if ((last = + MIN (urb->actual_length - endpoint->sent, + endpoint->tx_packetSize))) { + u8 *cp = urb->buffer + endpoint->sent; + + UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); + + if (((u32) cp & 1) == 0) { /* word aligned? */ + outsw (UDC_DATA, cp, last >> 1); + } else { /* byte aligned. */ + for (i = 0; i < (last >> 1); i++) { + u16 w = ((u16) cp[2 * i + 1] << 8) | + (u16) cp[2 * i]; + outw (w, UDC_DATA); + } + } + if (last & 1) { + outb (*(cp + last - 1), UDC_DATA); + } + } + endpoint->last = last; + } +} + +/* omap1510_read_noniso_rx_fifo + * + * This function implements TRM Figure 14-28. + * + * If the endpoint has an active rcv_urb, then the next packet of data is read + * from the rcv FIFO and written to rcv_urb->buffer at offset + * rcv_urb->actual_length to append the packet data to the data from any + * previous packets for this transfer. We assume that there is sufficient room + * left in the buffer to hold an entire packet of data. + * + * The return value is the number of bytes read from the FIFO for this packet. + * + * In accordance with Figure 14-28, the EP_NUM register must already have been + * written with the value to select the appropriate rcv FIFO before this routine + * is called. + */ +static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance + *endpoint) +{ + struct urb *urb = endpoint->rcv_urb; + int len = 0; + + if (urb) { + len = inw (UDC_RXFSTAT); + + if (len) { + unsigned char *cp = urb->buffer + urb->actual_length; + + insw (UDC_DATA, cp, len >> 1); + if (len & 1) + *(cp + len - 1) = inb (UDC_DATA); + } + } + return len; +} + +/* omap1510_prepare_for_control_write_status + * + * This function implements TRM Figure 14-17. + * + * We have to deal here with non-autodecoded control writes that haven't already + * been dealt with by ep0_recv_setup. The non-autodecoded standard control + * write requests are: set/clear endpoint feature, set configuration, set + * interface, and set descriptor. ep0_recv_setup handles set/clear requests for + * ENDPOINT_HALT by halting the endpoint for a set request and resetting the + * endpoint for a clear request. ep0_recv_setup returns an error for + * SET_DESCRIPTOR requests which causes them to be terminated with a stall by + * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by + * generating a DEVICE_SET_INTERFACE event. This leaves only the + * SET_CONFIGURATION event for us to deal with here. + * + */ +static void omap1510_prepare_for_control_write_status (struct urb *urb) +{ + struct usb_device_request *request = &urb->device_request;; + + /* check for a SET_CONFIGURATION request */ + if (request->bRequest == USB_REQ_SET_CONFIGURATION) { + int configuration = le16_to_cpu (request->wValue) & 0xff; + unsigned short devstat = inw (UDC_DEVSTAT); + + if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) { + /* device is currently in ADDRESSED state */ + if (configuration) { + /* Assume the specified non-zero configuration + * value is valid and switch to the CONFIGURED + * state. + */ + outw (UDC_Dev_Cfg, UDC_SYSCON2); + } + } else if ((devstat & UDC_CFG) == UDC_CFG) { + /* device is currently in CONFIGURED state */ + if (!configuration) { + /* Switch to ADDRESSED state. */ + outw (UDC_Clr_Cfg, UDC_SYSCON2); + } + } + } + + /* select EP0 tx FIFO */ + outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + /* clear endpoint (no data bytes in status stage) */ + outw (UDC_Clr_EP, UDC_CTRL); + /* enable the EP0 tx FIFO */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the endpoint */ + outw (UDC_EP_Dir, UDC_EP_NUM); +} + +/* udc_state_transition_up + * udc_state_transition_down + * + * Helper functions to implement device state changes. The device states and + * the events that transition between them are: + * + * STATE_ATTACHED + * || /\ + * \/ || + * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET + * || /\ + * \/ || + * STATE_POWERED + * || /\ + * \/ || + * DEVICE_RESET DEVICE_POWER_INTERRUPTION + * || /\ + * \/ || + * STATE_DEFAULT + * || /\ + * \/ || + * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET + * || /\ + * \/ || + * STATE_ADDRESSED + * || /\ + * \/ || + * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED + * || /\ + * \/ || + * STATE_CONFIGURED + * + * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED + * to STATE_CONFIGURED) from the specified initial state to the specified final + * state, passing through each intermediate state on the way. If the initial + * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then + * no state transitions will take place. + * + * udc_state_transition_down transitions down (in the direction from + * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the + * specified final state, passing through each intermediate state on the way. + * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final + * state, then no state transitions will take place. + * + * These functions must only be called with interrupts disabled. + */ +static void udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial < final) { + switch (initial) { + case STATE_ATTACHED: + usbd_device_event_irq (udc_device, + DEVICE_HUB_CONFIGURED, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_ADDRESS_ASSIGNED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, + 0); + case STATE_CONFIGURED: + break; + default: + break; + } + } +} + +static void udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial > final) { + switch (initial) { + case STATE_CONFIGURED: + usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0); + case STATE_ATTACHED: + break; + default: + break; + } + } +} + +/* Handle all device state changes. + * This function implements TRM Figure 14-21. + */ +static void omap1510_udc_state_changed (void) +{ + u16 bits; + u16 devstat = inw (UDC_DEVSTAT); + + UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat); + + bits = devstat ^ udc_devstat; + if (bits) { + if (bits & UDC_ATT) { + if (devstat & UDC_ATT) { + UDCDBG ("device attached and powered"); + udc_state_transition_up (udc_device->device_state, STATE_POWERED); + } else { + UDCDBG ("device detached or unpowered"); + udc_state_transition_down (udc_device->device_state, STATE_ATTACHED); + } + } + if (bits & UDC_USB_Reset) { + if (devstat & UDC_USB_Reset) { + UDCDBG ("device reset in progess"); + udc_state_transition_down (udc_device->device_state, STATE_POWERED); + } else { + UDCDBG ("device reset completed"); + } + } + if (bits & UDC_DEF) { + if (devstat & UDC_DEF) { + UDCDBG ("device entering default state"); + udc_state_transition_up (udc_device->device_state, STATE_DEFAULT); + } else { + UDCDBG ("device leaving default state"); + udc_state_transition_down (udc_device->device_state, STATE_POWERED); + } + } + if (bits & UDC_SUS) { + if (devstat & UDC_SUS) { + UDCDBG ("entering suspended state"); + usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0); + } else { + UDCDBG ("leaving suspended state"); + usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0); + } + } + if (bits & UDC_R_WK_OK) { + UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK) + ? "enabled" : "disabled"); + } + if (bits & UDC_ADD) { + if (devstat & UDC_ADD) { + UDCDBG ("default -> addressed"); + udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED); + } else { + UDCDBG ("addressed -> default"); + udc_state_transition_down (udc_device->device_state, STATE_DEFAULT); + } + } + if (bits & UDC_CFG) { + if (devstat & UDC_CFG) { + UDCDBG ("device configured"); + /* The ep0_recv_setup function generates the + * DEVICE_CONFIGURED event when a + * USB_REQ_SET_CONFIGURATION setup packet is + * received, so we should already be in the + * state STATE_CONFIGURED. + */ + udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED); + } else { + UDCDBG ("device deconfigured"); + udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED); + } + } + } + + /* Clear interrupt source */ + outw (UDC_DS_Chg, UDC_IRQ_SRC); + + /* Save current DEVSTAT */ + udc_devstat = devstat; +} + +/* Handle SETUP USB interrupt. + * This function implements TRM Figure 14-14. + */ +static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint) +{ + UDCDBG ("-> Entering device setup"); + + do { + const int setup_pktsize = 8; + unsigned char *datap = + (unsigned char *) &ep0_urb->device_request; + + /* Gain access to EP 0 setup FIFO */ + outw (UDC_Setup_Sel, UDC_EP_NUM); + + /* Read control request data */ + insb (UDC_DATA, datap, setup_pktsize); + + UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]", + *(datap + 0), *(datap + 1), *(datap + 2), + *(datap + 3), *(datap + 4), *(datap + 5), + *(datap + 6), *(datap + 7)); + + /* Reset EP0 setup FIFO */ + outw (0, UDC_EP_NUM); + } while (inw (UDC_IRQ_SRC) & UDC_Setup); + + /* Try to process setup packet */ + if (ep0_recv_setup (ep0_urb)) { + /* Not a setup packet, stall next EP0 transaction */ + udc_stall_ep (0); + UDCDBG ("can't parse setup packet, still waiting for setup"); + return; + } + + /* Check direction */ + if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) + == USB_REQ_HOST2DEVICE) { + UDCDBG ("control write on EP0"); + if (le16_to_cpu (ep0_urb->device_request.wLength)) { + /* We don't support control write data stages. + * The only standard control write request with a data + * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't + * support that so we just stall those requests. A + * function driver might support a non-standard + * write request with a data stage, but it isn't + * obvious what we would do with the data if we read it + * so we'll just stall it. It seems like the API isn't + * quite right here. + */ +#if 0 + /* Here is what we would do if we did support control + * write data stages. + */ + ep0_urb->actual_length = 0; + outw (0, UDC_EP_NUM); + /* enable the EP0 rx FIFO */ + outw (UDC_Set_FIFO_En, UDC_CTRL); +#else + /* Stall this request */ + UDCDBG ("Stalling unsupported EP0 control write data " + "stage."); + udc_stall_ep (0); +#endif + } else { + omap1510_prepare_for_control_write_status (ep0_urb); + } + } else { + UDCDBG ("control read on EP0"); + /* The ep0_recv_setup function has already placed our response + * packet data in ep0_urb->buffer and the packet length in + * ep0_urb->actual_length. + */ + endpoint->tx_urb = ep0_urb; + endpoint->sent = 0; + /* select the EP0 tx FIFO */ + outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo + * will update endpoint->last with the number of bytes written + * to the FIFO. + */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable the FIFO to start the packet transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the EP0 tx FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } + + UDCDBG ("<- Leaving device setup"); +} + +/* Handle endpoint 0 RX interrupt + * This routine implements TRM Figure 14-16. + */ +static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint) +{ + unsigned short status; + + UDCDBG ("RX on EP0"); + /* select EP0 rx FIFO */ + outw (UDC_EP_Sel, UDC_EP_NUM); + + status = inw (UDC_STAT_FLG); + + if (status & UDC_ACK) { + /* Check direction */ + if ((ep0_urb->device_request.bmRequestType + & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { + /* This rx interrupt must be for a control write data + * stage packet. + * + * We don't support control write data stages. + * We should never end up here. + */ + + /* clear the EP0 rx FIFO */ + outw (UDC_Clr_EP, UDC_CTRL); + + /* deselect the EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + + UDCDBG ("Stalling unexpected EP0 control write " + "data stage packet"); + udc_stall_ep (0); + } else { + /* This rx interrupt must be for a control read status + * stage packet. + */ + UDCDBG ("ACK on EP0 control read status stage packet"); + /* deselect EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + } + } else if (status & UDC_STALL) { + UDCDBG ("EP0 stall during RX"); + /* deselect EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + } else { + /* deselect EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + } +} + +/* Handle endpoint 0 TX interrupt + * This routine implements TRM Figure 14-18. + */ +static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint) +{ + unsigned short status; + struct usb_device_request *request = &ep0_urb->device_request; + + UDCDBG ("TX on EP0"); + /* select EP0 TX FIFO */ + outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + + status = inw (UDC_STAT_FLG); + if (status & UDC_ACK) { + /* Check direction */ + if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == + USB_REQ_HOST2DEVICE) { + /* This tx interrupt must be for a control write status + * stage packet. + */ + UDCDBG ("ACK on EP0 control write status stage packet"); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } else { + /* This tx interrupt must be for a control read data + * stage packet. + */ + int wLength = le16_to_cpu (request->wLength); + + /* Update our count of bytes sent so far in this + * transfer. + */ + endpoint->sent += endpoint->last; + + /* We are finished with this transfer if we have sent + * all of the bytes in our tx urb (urb->actual_length) + * unless we need a zero-length terminating packet. We + * need a zero-length terminating packet if we returned + * fewer bytes than were requested (wLength) by the host, + * and the number of bytes we returned is an exact + * multiple of the packet size endpoint->tx_packetSize. + */ + if ((endpoint->sent == ep0_urb->actual_length) + && ((ep0_urb->actual_length == wLength) + || (endpoint->last != + endpoint->tx_packetSize))) { + /* Done with control read data stage. */ + UDCDBG ("control read data stage complete"); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + /* select EP0 RX FIFO to prepare for control + * read status stage. + */ + outw (UDC_EP_Sel, UDC_EP_NUM); + /* clear the EP0 RX FIFO */ + outw (UDC_Clr_EP, UDC_CTRL); + /* enable the EP0 RX FIFO */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the EP0 RX FIFO */ + outw (0, UDC_EP_NUM); + } else { + /* We still have another packet of data to send + * in this control read data stage or else we + * need a zero-length terminating packet. + */ + UDCDBG ("ACK control read data stage packet"); + omap1510_write_noniso_tx_fifo (endpoint); + /* enable the EP0 tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } + } + } else if (status & UDC_STALL) { + UDCDBG ("EP0 stall during TX"); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } else { + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } +} + +/* Handle RX transaction on non-ISO endpoint. + * This function implements TRM Figure 14-27. + * The ep argument is a physical endpoint number for a non-ISO OUT endpoint + * in the range 1 to 15. + */ +static void omap1510_udc_epn_rx (int ep) +{ + unsigned short status; + + /* Check endpoint status */ + status = inw (UDC_STAT_FLG); + + if (status & UDC_ACK) { + int nbytes; + struct usb_endpoint_instance *endpoint = + omap1510_find_ep (ep); + + nbytes = omap1510_read_noniso_rx_fifo (endpoint); + usbd_rcv_complete (endpoint, nbytes, 0); + + /* enable rx FIFO to prepare for next packet */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + } else if (status & UDC_STALL) { + UDCDBGA ("STALL on RX endpoint %d", ep); + } else if (status & UDC_NAK) { + UDCDBGA ("NAK on RX ep %d", ep); + } else { + serial_printf ("omap-bi: RX on ep %d with status %x", ep, + status); + } +} + +/* Handle TX transaction on non-ISO endpoint. + * This function implements TRM Figure 14-29. + * The ep argument is a physical endpoint number for a non-ISO IN endpoint + * in the range 16 to 30. + */ +static void omap1510_udc_epn_tx (int ep) +{ + unsigned short status; + + /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */ + + /* Check endpoint status */ + status = inw (UDC_STAT_FLG); + + if (status & UDC_ACK) { + struct usb_endpoint_instance *endpoint = + omap1510_find_ep (ep); + + /* We need to transmit a terminating zero-length packet now if + * we have sent all of the data in this URB and the transfer + * size was an exact multiple of the packet size. + */ + if (endpoint->tx_urb + && (endpoint->last == endpoint->tx_packetSize) + && (endpoint->tx_urb->actual_length - endpoint->sent - + endpoint->last == 0)) { + /* Prepare to transmit a zero-length packet. */ + endpoint->sent += endpoint->last; + /* write 0 bytes of data to FIFO */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + } else if (endpoint->tx_urb + && endpoint->tx_urb->actual_length) { + /* retire the data that was just sent */ + usbd_tx_complete (endpoint); + /* Check to see if we have more data ready to transmit + * now. + */ + if (endpoint->tx_urb + && endpoint->tx_urb->actual_length) { + /* write data to FIFO */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + } + } + } else if (status & UDC_STALL) { + UDCDBGA ("STALL on TX endpoint %d", ep); + } else if (status & UDC_NAK) { + UDCDBGA ("NAK on TX endpoint %d", ep); + } else { + /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */ + } +} + + +/* +------------------------------------------------------------------------------- +*/ + +/* Handle general USB interrupts and dispatch according to type. + * This function implements TRM Figure 14-13. + */ +void omap1510_udc_irq (void) +{ + u16 irq_src = inw (UDC_IRQ_SRC); + int valid_irq = 0; + + if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */ + return; + + UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src); + /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */ + + if (irq_src & UDC_DS_Chg) { + /* Device status changed */ + omap1510_udc_state_changed (); + valid_irq++; + } + if (irq_src & UDC_EP0_RX) { + /* Endpoint 0 receive */ + outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */ + omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0); + valid_irq++; + } + if (irq_src & UDC_EP0_TX) { + /* Endpoint 0 transmit */ + outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */ + omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0); + valid_irq++; + } + if (irq_src & UDC_Setup) { + /* Device setup */ + omap1510_udc_setup (udc_device->bus->endpoint_array + 0); + valid_irq++; + } + /*if (!valid_irq) */ + /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */ + UDCDBGA ("< IRQ #%d end >", udc_interrupts); + udc_interrupts++; +} + +/* This function implements TRM Figure 14-26. */ +void omap1510_udc_noniso_irq (void) +{ + unsigned short epnum; + unsigned short irq_src = inw (UDC_IRQ_SRC); + int valid_irq = 0; + + if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX))) + return; + + UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC)); + + if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */ + /* Determine the endpoint number for this interrupt */ + epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8; + UDCDBGA ("RX on ep %x", epnum); + + /* acknowledge interrupt */ + outw (UDC_EPn_RX, UDC_IRQ_SRC); + + if (epnum) { + /* select the endpoint FIFO */ + outw (UDC_EP_Sel | epnum, UDC_EP_NUM); + + omap1510_udc_epn_rx (epnum); + + /* deselect the endpoint FIFO */ + outw (epnum, UDC_EP_NUM); + } + valid_irq++; + } + if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */ + /* Determine the endpoint number for this interrupt */ + epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN; + UDCDBGA ("TX on ep %x", epnum); + + /* acknowledge interrupt */ + outw (UDC_EPn_TX, UDC_IRQ_SRC); + + if (epnum) { + /* select the endpoint FIFO */ + outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); + + omap1510_udc_epn_tx (epnum); + + /* deselect the endpoint FIFO */ + outw (UDC_EP_Dir | epnum, UDC_EP_NUM); + } + valid_irq++; + } + if (!valid_irq) + serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n", + irq_src); +} + +/* +------------------------------------------------------------------------------- +*/ + + +/* + * Start of public functions. + */ + +/* Called to start packet transmission. */ +int udc_endpoint_write (struct usb_endpoint_instance *endpoint) +{ + unsigned short epnum = + endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("Starting transmit on ep %x", epnum); + + if (endpoint->tx_urb) { + /* select the endpoint FIFO */ + outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); + /* write data to FIFO */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the endpoint FIFO */ + outw (UDC_EP_Dir | epnum, UDC_EP_NUM); + } + + return 0; +} + +/* Start to initialize h/w stuff */ +int udc_init (void) +{ + u16 udc_rev; + uchar value; + ulong gpio; + int i; + + /* Let the device settle down before we start */ + for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); + + udc_device = NULL; + + UDCDBG ("starting"); + + /* Check peripheral reset. Must be 1 to make sure + MPU TIPB peripheral reset is inactive */ + UDCREG (ARM_RSTCT2); + + /* Set and check clock control. + * We might ought to be using the clock control API to do + * this instead of fiddling with the clock registers directly + * here. + */ + outw ((1 << 4) | (1 << 5), CLOCK_CTRL); + UDCREG (CLOCK_CTRL); + +#ifdef CONFIG_OMAP1510 + /* This code was originally implemented for OMAP1510 and + * therefore is only applicable for OMAP1510 boards. For + * OMAP5912 or OMAP16xx the register APLL_CTRL does not + * exist and DPLL_CTRL is already configured. + */ + + /* Set and check APLL */ + outw (0x0008, APLL_CTRL); + UDCREG (APLL_CTRL); + /* Set and check DPLL */ + outw (0x2210, DPLL_CTRL); + UDCREG (DPLL_CTRL); +#endif + /* Set and check SOFT + * The below line of code has been changed to perform a + * read-modify-write instead of a simple write for + * configuring the SOFT_REQ register. This allows the code + * to be compatible with OMAP5912 and OMAP16xx devices + */ + outw ((1 << 4) | (1 << 3) | 1 | (inw(SOFT_REQ)), SOFT_REQ); + + /* Short delay to wait for DPLL */ + udelay (1000); + + /* Print banner with device revision */ + udc_rev = inw (UDC_REV) & 0xff; +#ifdef CONFIG_OMAP1510 + printf ("USB: TI OMAP1510 USB function module rev %d.%d\n", + udc_rev >> 4, udc_rev & 0xf); +#endif + +#ifdef CONFIG_OMAP1610 + printf ("USB: TI OMAP5912 USB function module rev %d.%d\n", + udc_rev >> 4, udc_rev & 0xf); +#endif + +#ifdef CONFIG_OMAP_SX1 + i2c_read (0x32, 0x04, 1, &value, 1); + value |= 0x04; + i2c_write (0x32, 0x04, 1, &value, 1); + + i2c_read (0x32, 0x03, 1, &value, 1); + value |= 0x01; + i2c_write (0x32, 0x03, 1, &value, 1); + + gpio = inl(GPIO_PIN_CONTROL_REG); + gpio |= 0x0002; /* A_IRDA_OFF */ + gpio |= 0x0800; /* A_SWITCH */ + gpio |= 0x8000; /* A_USB_ON */ + outl (gpio, GPIO_PIN_CONTROL_REG); + + gpio = inl(GPIO_DIR_CONTROL_REG); + gpio &= ~0x0002; /* A_IRDA_OFF */ + gpio &= ~0x0800; /* A_SWITCH */ + gpio &= ~0x8000; /* A_USB_ON */ + outl (gpio, GPIO_DIR_CONTROL_REG); + + gpio = inl(GPIO_DATA_OUTPUT_REG); + gpio |= 0x0002; /* A_IRDA_OFF */ + gpio &= ~0x0800; /* A_SWITCH */ + gpio &= ~0x8000; /* A_USB_ON */ + outl (gpio, GPIO_DATA_OUTPUT_REG); +#endif + + /* The VBUS_MODE bit selects whether VBUS detection is done via + * software (1) or hardware (0). When software detection is + * selected, VBUS_CTRL selects whether USB is not connected (0) + * or connected (1). + */ + outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); + outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); + UDCREGL (FUNC_MUX_CTRL_0); + + /* + * At this point, device is ready for configuration... + */ + + UDCDBG ("disable USB interrupts"); + outw (0, UDC_IRQ_EN); + UDCREG (UDC_IRQ_EN); + + UDCDBG ("disable USB DMA"); + outw (0, UDC_DMA_IRQ_EN); + UDCREG (UDC_DMA_IRQ_EN); + + UDCDBG ("initialize SYSCON1"); + outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1); + UDCREG (UDC_SYSCON1); + + return 0; +} + +/* Stall endpoint */ +static void udc_stall_ep (unsigned int ep_addr) +{ + /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("stall ep_addr %d", ep_addr); + + /* REVISIT? + * The OMAP TRM section 14.2.4.2 says we must check that the FIFO + * is empty before halting the endpoint. The current implementation + * doesn't check that the FIFO is empty. + */ + + if (!ep_num) { + outw (UDC_Stall_Cmd, UDC_SYSCON2); + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { + if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { + /* we have a valid rx endpoint, so halt it */ + outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); + outw (UDC_Set_Halt, UDC_CTRL); + outw (ep_num, UDC_EP_NUM); + } + } else { + if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { + /* we have a valid tx endpoint, so halt it */ + outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM); + outw (UDC_Set_Halt, UDC_CTRL); + outw (ep_num, UDC_EP_NUM); + } + } +} + +/* Reset endpoint */ +#if 0 +static void udc_reset_ep (unsigned int ep_addr) +{ + /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("reset ep_addr %d", ep_addr); + + if (!ep_num) { + /* control endpoint 0 can't be reset */ + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { + UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num, + inw (UDC_EP_RX (ep_num))); + if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { + /* we have a valid rx endpoint, so reset it */ + outw (ep_num | UDC_EP_Sel, UDC_EP_NUM); + outw (UDC_Reset_EP, UDC_CTRL); + outw (ep_num, UDC_EP_NUM); + UDCDBGA ("OUT endpoint %d reset", ep_num); + } + } else { + UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num, + inw (UDC_EP_TX (ep_num))); + /* Resetting of tx endpoints seems to be causing the USB function + * module to fail, which causes problems when the driver is + * uninstalled. We'll skip resetting tx endpoints for now until + * we figure out what the problem is. + */ +#if 0 + if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { + /* we have a valid tx endpoint, so reset it */ + outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + outw (UDC_Reset_EP, UDC_CTRL); + outw (ep_num | UDC_EP_Dir, UDC_EP_NUM); + UDCDBGA ("IN endpoint %d reset", ep_num); + } +#endif + } +} +#endif + +/* ************************************************************************** */ + +/** + * udc_check_ep - check logical endpoint + * + * Return physical endpoint number to use for this logical endpoint or zero if not valid. + */ +#if 0 +int udc_check_ep (int logical_endpoint, int packetsize) +{ + if ((logical_endpoint == 0x80) || + ((logical_endpoint & 0x8f) != logical_endpoint)) { + return 0; + } + + switch (packetsize) { + case 8: + case 16: + case 32: + case 64: + case 128: + case 256: + case 512: + break; + default: + return 0; + } + + return EP_ADDR_TO_PHYS_EP (logical_endpoint); +} +#endif + +/* + * udc_setup_ep - setup endpoint + * + * Associate a physical endpoint with endpoint_instance + */ +void udc_setup_ep (struct usb_device_instance *device, + unsigned int ep, struct usb_endpoint_instance *endpoint) +{ + UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address); + + /* This routine gets called by bi_modinit for endpoint 0 and from + * bi_config for all of the other endpoints. bi_config gets called + * during the DEVICE_CREATE, DEVICE_CONFIGURED, and + * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet + * RAM after bi_config scans the selected device configuration and + * initializes the endpoint structures, but before this routine enables + * the OUT endpoint FIFOs. Since bi_config calls this routine in a + * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our + * packet RAM here when ep==1. + * I really hate to do this here, but it seems like the API exported + * by the USB bus interface controller driver to the usbd-bi module + * isn't quite right so there is no good place to do this. + */ + if (ep == 1) { + omap1510_deconfigure_device (); + omap1510_configure_device (device); + } + + if (endpoint && (ep < UDC_MAX_ENDPOINTS)) { + int ep_addr = endpoint->endpoint_address; + + if (!ep_addr) { + /* nothing to do for endpoint 0 */ + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + /* nothing to do for IN (tx) endpoints */ + } else { /* OUT (rx) endpoint */ + if (endpoint->rcv_packetSize) { + /*struct urb* urb = &(urb_out_array[ep&0xFF]); */ + /*urb->endpoint = endpoint; */ + /*urb->device = device; */ + /*urb->buffer_length = sizeof(urb->buffer); */ + + /*endpoint->rcv_urb = urb; */ + omap1510_prepare_endpoint_for_rx (ep_addr); + } + } + } +} + +/** + * udc_disable_ep - disable endpoint + * @ep: + * + * Disable specified endpoint + */ +#if 0 +void udc_disable_ep (unsigned int ep_addr) +{ + /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */ + + UDCDBGA ("disable ep_addr %d", ep_addr); + + if (!ep_num) { + /* nothing to do for endpoint 0 */ ; + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + if (endpoint->tx_packetSize) { + /* we have a valid tx endpoint */ + /*usbd_flush_tx(endpoint); */ + endpoint->tx_urb = NULL; + } + } else { + if (endpoint->rcv_packetSize) { + /* we have a valid rx endpoint */ + /*usbd_flush_rcv(endpoint); */ + endpoint->rcv_urb = NULL; + } + } +} +#endif + +/* ************************************************************************** */ + +/** + * udc_connected - is the USB cable connected + * + * Return non-zero if cable is connected. + */ +#if 0 +int udc_connected (void) +{ + return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); +} +#endif + +/* Turn on the USB connection by enabling the pullup resistor */ +void udc_connect (void) +{ + UDCDBG ("connect, enable Pullup"); + outl (0x00000018, FUNC_MUX_CTRL_D); +} + +/* Turn off the USB connection by disabling the pullup resistor */ +void udc_disconnect (void) +{ + UDCDBG ("disconnect, disable Pullup"); + outl (0x00000000, FUNC_MUX_CTRL_D); +} + +/* ************************************************************************** */ + + +/* + * udc_disable_interrupts - disable interrupts + * switch off interrupts + */ +#if 0 +void udc_disable_interrupts (struct usb_device_instance *device) +{ + UDCDBG ("disabling all interrupts"); + outw (0, UDC_IRQ_EN); +} +#endif + +/* ************************************************************************** */ + +/** + * udc_ep0_packetsize - return ep0 packetsize + */ +#if 0 +int udc_ep0_packetsize (void) +{ + return EP0_PACKETSIZE; +} +#endif + +/* Switch on the UDC */ +void udc_enable (struct usb_device_instance *device) +{ + UDCDBGA ("enable device %p, status %d", device, device->status); + + /* initialize driver state variables */ + udc_devstat = 0; + + /* Save the device structure pointer */ + udc_device = device; + + /* Setup ep0 urb */ + if (!ep0_urb) { + ep0_urb = + usbd_alloc_urb (udc_device, + udc_device->bus->endpoint_array); + } else { + serial_printf ("udc_enable: ep0_urb already allocated %p\n", + ep0_urb); + } + + UDCDBG ("Check clock status"); + UDCREG (STATUS_REQ); + + /* The VBUS_MODE bit selects whether VBUS detection is done via + * software (1) or hardware (0). When software detection is + * selected, VBUS_CTRL selects whether USB is not connected (0) + * or connected (1). + */ + outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE, + FUNC_MUX_CTRL_0); + UDCREGL (FUNC_MUX_CTRL_0); + + omap1510_configure_device (device); +} + +/* Switch off the UDC */ +void udc_disable (void) +{ + UDCDBG ("disable UDC"); + + omap1510_deconfigure_device (); + + /* The VBUS_MODE bit selects whether VBUS detection is done via + * software (1) or hardware (0). When software detection is + * selected, VBUS_CTRL selects whether USB is not connected (0) + * or connected (1). + */ + outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); + outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); + UDCREGL (FUNC_MUX_CTRL_0); + + /* Free ep0 URB */ + if (ep0_urb) { + /*usbd_dealloc_urb(ep0_urb); */ + ep0_urb = NULL; + } + + /* Reset device pointer. + * We ought to do this here to balance the initialization of udc_device + * in udc_enable, but some of our other exported functions get called + * by the bus interface driver after udc_disable, so we have to hang on + * to the device pointer to avoid a null pointer dereference. */ + /* udc_device = NULL; */ +} + +/** + * udc_startup - allow udc code to do any additional startup + */ +void udc_startup_events (struct usb_device_instance *device) +{ + /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ + usbd_device_event_irq (device, DEVICE_INIT, 0); + + /* The DEVICE_CREATE event puts the USB device in the state + * STATE_ATTACHED. + */ + usbd_device_event_irq (device, DEVICE_CREATE, 0); + + /* Some USB controller driver implementations signal + * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. + * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, + * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. + * The OMAP USB client controller has the capability to detect when the + * USB cable is connected to a powered USB bus via the ATT bit in the + * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and + * DEVICE_RESET events until later. + */ + + udc_enable (device); +} + +/** + * udc_irq - do pseudo interrupts + */ +void udc_irq(void) +{ + /* Loop while we have interrupts. + * If we don't do this, the input chain + * polling delay is likely to miss + * host requests. + */ + while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { + /* Handle any new IRQs */ + omap1510_udc_irq (); + omap1510_udc_noniso_irq (); + } +} + +/* Flow control */ +void udc_set_nak(int epid) +{ + /* TODO: implement this functionality in omap1510 */ +} + +void udc_unset_nak (int epid) +{ + /* TODO: implement this functionality in omap1510 */ +} |