diff options
Diffstat (limited to 'drivers/usb/gadget/ether.c')
-rw-r--r-- | drivers/usb/gadget/ether.c | 513 |
1 files changed, 267 insertions, 246 deletions
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 2965299..bc6480c 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -89,8 +89,8 @@ unsigned packet_received, packet_sent; /* Based on linux 2.6.27 version */ #define DRIVER_VERSION "May Day 2005" -static const char shortname [] = "ether"; -static const char driver_desc [] = DRIVER_DESC; +static const char shortname[] = "ether"; +static const char driver_desc[] = DRIVER_DESC; #define RX_EXTRA 20 /* guard against rx overflows */ @@ -114,7 +114,7 @@ static inline int is_cdc(struct eth_dev *dev) { #if !defined(DEV_CONFIG_SUBSET) return 1; /* only cdc possible */ -#elif !defined (DEV_CONFIG_CDC) +#elif !defined(DEV_CONFIG_CDC) return 0; /* only subset possible */ #else return dev->cdc; /* depends on what hardware we found */ @@ -122,7 +122,7 @@ static inline int is_cdc(struct eth_dev *dev) } #define subset_active(dev) (!is_cdc(dev)) -#define cdc_active(dev) ( is_cdc(dev)) +#define cdc_active(dev) (is_cdc(dev)) #define DEFAULT_QLEN 2 /* double buffering by default */ @@ -180,15 +180,16 @@ struct eth_dev { unsigned zlp:1; unsigned cdc:1; unsigned suspended:1; - unsigned network_started:1; + unsigned network_started:1; u16 cdc_filter; unsigned long todo; - int mtu; + int mtu; #define WORK_RX_MEMORY 0 - u8 host_mac [ETH_ALEN]; + u8 host_mac[ETH_ALEN]; }; -/* This version autoconfigures as much as possible at run-time. +/* + * This version autoconfigures as much as possible at run-time. * * It also ASSUMES a self-powered device, without remote wakeup, * although remote wakeup support would make sense. @@ -196,17 +197,20 @@ struct eth_dev { /*-------------------------------------------------------------------------*/ -/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! +/* + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. */ -/* Thanks to NetChip Technologies for donating this product ID. +/* + * Thanks to NetChip Technologies for donating this product ID. * It's for devices with only CDC Ethernet configurations. */ #define CDC_VENDOR_NUM 0x0525 /* NetChip */ #define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */ -/* For hardware that can't talk CDC, we use the same vendor ID that +/* + * For hardware that can't talk CDC, we use the same vendor ID that * ARM Linux has used for ethernet-over-usb, both with sa1100 and * with pxa250. We're protocol-compatible, if the host-side drivers * use the endpoint descriptors. bcdDevice (version) is nonzero, so @@ -220,7 +224,8 @@ struct eth_dev { #define SIMPLE_VENDOR_NUM 0x049f #define SIMPLE_PRODUCT_NUM 0x505a -/* Some systems will want different product identifers published in the +/* + * Some systems will want different product identifers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ @@ -238,7 +243,8 @@ static char host_addr[18]; /*-------------------------------------------------------------------------*/ -/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly +/* + * USB DRIVER HOOKUP (to the hardware driver, below us), mostly * ep0 implementation: descriptors, config management, setup(). * also optional class-specific notification interrupt transfer. */ @@ -276,14 +282,14 @@ device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_COMM, .bDeviceSubClass = 0, .bDeviceProtocol = 0, - .idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM), + .idVendor = __constant_cpu_to_le16(CDC_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16(CDC_PRODUCT_NUM), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, .bNumConfigurations = 1, @@ -338,7 +344,7 @@ static const struct usb_cdc_header_desc header_desc = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16 (0x0110), + .bcdCDC = __constant_cpu_to_le16(0x0110), }; #if defined(DEV_CONFIG_CDC) @@ -356,7 +362,8 @@ static const struct usb_cdc_union_desc union_desc = { #ifndef DEV_CONFIG_CDC -/* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various +/* + * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various * ways: data endpoints live in the control interface, there's no data * interface, and it's not used to talk to a cell phone radio. */ @@ -373,7 +380,8 @@ static const struct usb_cdc_mdlm_desc mdlm_desc = { }, }; -/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we +/* + * since "usb_cdc_mdlm_detail_desc" is a variable length structure, we * can't really use its struct. All we do here is say that we're using * the submode of "SAFE" which directly matches the CDC Subset. */ @@ -389,24 +397,23 @@ static const u8 mdlm_detail_desc[] = { #endif - static const struct usb_cdc_ether_desc ether_desc = { - .bLength = sizeof (ether_desc), + .bLength = sizeof(ether_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, /* this descriptor actually adds value, surprise! */ .iMACAddress = STRING_ETHADDR, - .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */ - .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN), - .wNumberMCFilters = __constant_cpu_to_le16 (0), + .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */ + .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN), + .wNumberMCFilters = __constant_cpu_to_le16(0), .bNumberPowerFilters = 0, }; - #if defined(DEV_CONFIG_CDC) -/* include the status endpoint if we can, even where it's optional. +/* + * include the status endpoint if we can, even where it's optional. * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one * packet, to simplify cancellation; and a big transfer interval, to * waste less bandwidth. @@ -427,7 +434,7 @@ fs_status_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT), + .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT), .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, }; #endif @@ -493,7 +500,6 @@ subset_data_intf = { #endif /* SUBSET */ - static struct usb_endpoint_descriptor fs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -512,7 +518,7 @@ fs_sink_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static const struct usb_descriptor_header *fs_eth_function [11] = { +static const struct usb_descriptor_header *fs_eth_function[11] = { (struct usb_descriptor_header *) &otg_descriptor, #ifdef DEV_CONFIG_CDC /* "cdc" mode descriptors */ @@ -560,7 +566,7 @@ hs_status_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT), + .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT), .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, }; #endif /* DEV_CONFIG_CDC */ @@ -571,7 +577,7 @@ hs_source_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16 (512), + .wMaxPacketSize = __constant_cpu_to_le16(512), }; static struct usb_endpoint_descriptor @@ -580,7 +586,7 @@ hs_sink_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16 (512), + .wMaxPacketSize = __constant_cpu_to_le16(512), }; static struct usb_qualifier_descriptor @@ -588,13 +594,13 @@ dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_COMM, .bNumConfigurations = 1, }; -static const struct usb_descriptor_header *hs_eth_function [11] = { +static const struct usb_descriptor_header *hs_eth_function[11] = { (struct usb_descriptor_header *) &otg_descriptor, #ifdef DEV_CONFIG_CDC /* "cdc" mode descriptors */ @@ -640,20 +646,19 @@ ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, return fs; } - /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ -static char manufacturer [50]; -static char product_desc [40] = DRIVER_DESC; -static char serial_number [20]; +static char manufacturer[50]; +static char product_desc[40] = DRIVER_DESC; +static char serial_number[20]; /* address that the host will use ... usually assigned at random */ -static char ethaddr [2 * ETH_ALEN + 1]; +static char ethaddr[2 * ETH_ALEN + 1]; /* static strings, in UTF-8 */ -static struct usb_string strings [] = { +static struct usb_string strings[] = { { STRING_MANUFACTURER, manufacturer, }, { STRING_PRODUCT, product_desc, }, { STRING_SERIALNUMBER, serial_number, }, @@ -674,13 +679,11 @@ static struct usb_gadget_strings stringtab = { .strings = strings, }; - /*============================================================================*/ static u8 control_req[USB_BUFSIZ]; static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4))); - /** * strlcpy - Copy a %NUL terminated string into a sized buffer * @dest: Where to copy the string to @@ -704,7 +707,6 @@ size_t strlcpy(char *dest, const char *src, size_t size) return ret; } - /*============================================================================*/ /* @@ -730,13 +732,13 @@ config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg) return -EINVAL; config = ð_config; - function = which_fn (eth); + function = which_fn(eth); /* for now, don't advertise srp-only devices */ if (!is_otg) function++; - len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function); + len = usb_gadget_config_buf(config, buf, USB_BUFSIZ, function); if (len < 0) return len; ((struct usb_config_descriptor *) buf)->bDescriptorType = type; @@ -745,10 +747,10 @@ config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg) /*-------------------------------------------------------------------------*/ -static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags); +static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags); static int -set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) +set_ether_config(struct eth_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -756,11 +758,11 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) #if defined(DEV_CONFIG_CDC) /* status endpoint used for (optionally) CDC */ if (!subset_active(dev) && dev->status_ep) { - dev->status = ep_desc (gadget, &hs_status_desc, + dev->status = ep_desc(gadget, &hs_status_desc, &fs_status_desc); dev->status_ep->driver_data = dev; - result = usb_ep_enable (dev->status_ep, dev->status); + result = usb_ep_enable(dev->status_ep, dev->status); if (result != 0) { debug("enable %s --> %d\n", dev->status_ep->name, result); @@ -775,19 +777,20 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc); dev->out_ep->driver_data = dev; - /* With CDC, the host isn't allowed to use these two data + /* + * With CDC, the host isn't allowed to use these two data * endpoints in the default altsetting for the interface. * so we don't activate them yet. Reset from SET_INTERFACE. */ if (!cdc_active(dev)) { - result = usb_ep_enable (dev->in_ep, dev->in); + result = usb_ep_enable(dev->in_ep, dev->in); if (result != 0) { debug("enable %s --> %d\n", dev->in_ep->name, result); goto done; } - result = usb_ep_enable (dev->out_ep, dev->out); + result = usb_ep_enable(dev->out_ep, dev->out); if (result != 0) { debug("enable %s --> %d\n", dev->out_ep->name, result); @@ -797,15 +800,15 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) done: if (result == 0) - result = alloc_requests (dev, qlen (gadget), gfp_flags); + result = alloc_requests(dev, qlen(gadget), gfp_flags); /* on error, disable any endpoints */ if (result < 0) { if (!subset_active(dev) && dev->status_ep) - (void) usb_ep_disable (dev->status_ep); + (void) usb_ep_disable(dev->status_ep); dev->status = NULL; - (void) usb_ep_disable (dev->in_ep); - (void) usb_ep_disable (dev->out_ep); + (void) usb_ep_disable(dev->in_ep); + (void) usb_ep_disable(dev->out_ep); dev->in = NULL; dev->out = NULL; } @@ -814,59 +817,61 @@ done: return result; } - -static void eth_reset_config (struct eth_dev *dev) +static void eth_reset_config(struct eth_dev *dev) { if (dev->config == 0) return; debug("%s\n", __func__); - /* disable endpoints, forcing (synchronous) completion of + /* + * disable endpoints, forcing (synchronous) completion of * pending i/o. then free the requests. */ if (dev->in) { - usb_ep_disable (dev->in_ep); + usb_ep_disable(dev->in_ep); if (dev->tx_req) { - usb_ep_free_request (dev->in_ep, dev->tx_req); - dev->tx_req=NULL; + usb_ep_free_request(dev->in_ep, dev->tx_req); + dev->tx_req = NULL; } } if (dev->out) { - usb_ep_disable (dev->out_ep); + usb_ep_disable(dev->out_ep); if (dev->rx_req) { - usb_ep_free_request (dev->out_ep, dev->rx_req); - dev->rx_req=NULL; + usb_ep_free_request(dev->out_ep, dev->rx_req); + dev->rx_req = NULL; } } - if (dev->status) { - usb_ep_disable (dev->status_ep); - } + if (dev->status) + usb_ep_disable(dev->status_ep); + dev->cdc_filter = 0; dev->config = 0; } -/* change our operational config. must agree with the code +/* + * change our operational config. must agree with the code * that returns config descriptors, and altsetting code. */ -static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags) +static int eth_set_config(struct eth_dev *dev, unsigned number, + gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; - if (gadget_is_sa1100 (gadget) + if (gadget_is_sa1100(gadget) && dev->config && dev->tx_qlen != 0) { /* tx fifo is full, but we can't clear it...*/ error("can't change configurations"); return -ESPIPE; } - eth_reset_config (dev); + eth_reset_config(dev); switch (number) { case DEV_CONFIG_VALUE: - result = set_ether_config (dev, gfp_flags); + result = set_ether_config(dev, gfp_flags); break; default: result = -EINVAL; @@ -877,7 +882,7 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags if (result) { if (number) - eth_reset_config (dev); + eth_reset_config(dev); usb_gadget_vbus_draw(dev->gadget, gadget_is_otg(dev->gadget) ? 8 : 100); } else { @@ -888,17 +893,20 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags usb_gadget_vbus_draw(dev->gadget, power); switch (gadget->speed) { - case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_FULL: + speed = "full"; break; #ifdef CONFIG_USB_GADGET_DUALSPEED - case USB_SPEED_HIGH: speed = "high"; break; + case USB_SPEED_HIGH: + speed = "high"; break; #endif - default: speed = "?"; break; + default: + speed = "?"; break; } dev->config = number; printf("%s speed config #%d: %d mA, %s, using %s\n", speed, number, power, driver_desc, - (cdc_active(dev)? "CDC Ethernet" + (cdc_active(dev) ? "CDC Ethernet" : "CDC Ethernet Subset")); } return result; @@ -908,13 +916,14 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags #ifdef DEV_CONFIG_CDC -/* The interrupt endpoint is used in CDC networking models (Ethernet, ATM) +/* + * The interrupt endpoint is used in CDC networking models (Ethernet, ATM) * only to notify the host about link status changes (which we support) or * report completion of some encapsulated command. Since * we want this CDC Ethernet code to be vendor-neutral, we don't use that * command mechanism; and only one status request is ever queued. */ -static void eth_status_complete (struct usb_ep *ep, struct usb_request *req) +static void eth_status_complete(struct usb_ep *ep, struct usb_request *req) { struct usb_cdc_notification *event = req->buf; int value = req->status; @@ -927,38 +936,38 @@ static void eth_status_complete (struct usb_ep *ep, struct usb_request *req) event->bmRequestType = 0xA1; event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE; - event->wValue = __constant_cpu_to_le16 (0); - event->wIndex = __constant_cpu_to_le16 (1); - event->wLength = __constant_cpu_to_le16 (8); + event->wValue = __constant_cpu_to_le16(0); + event->wIndex = __constant_cpu_to_le16(1); + event->wLength = __constant_cpu_to_le16(8); /* SPEED_CHANGE data is up/down speeds in bits/sec */ - data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget)); + data[0] = data[1] = cpu_to_le32(BITRATE(dev->gadget)); req->length = STATUS_BYTECOUNT; - value = usb_ep_queue (ep, req, GFP_ATOMIC); + value = usb_ep_queue(ep, req, GFP_ATOMIC); debug("send SPEED_CHANGE --> %d\n", value); if (value == 0) return; } else if (value != -ECONNRESET) { debug("event %02x --> %d\n", event->bNotificationType, value); - if (event->bNotificationType== - USB_CDC_NOTIFY_SPEED_CHANGE) - { - l_ethdev.network_started=1; + if (event->bNotificationType == + USB_CDC_NOTIFY_SPEED_CHANGE) { + l_ethdev.network_started = 1; printf("USB network up!\n"); } } req->context = NULL; } -static void issue_start_status (struct eth_dev *dev) +static void issue_start_status(struct eth_dev *dev) { struct usb_request *req = dev->stat_req; struct usb_cdc_notification *event; int value; - /* flush old status + /* + * flush old status * * FIXME ugly idiom, maybe we'd be better with just * a "cancel the whole queue" primitive since any @@ -967,24 +976,25 @@ static void issue_start_status (struct eth_dev *dev) * * FIXME iff req->context != null just dequeue it */ - usb_ep_disable (dev->status_ep); - usb_ep_enable (dev->status_ep, dev->status); + usb_ep_disable(dev->status_ep); + usb_ep_enable(dev->status_ep, dev->status); - /* 3.8.1 says to issue first NETWORK_CONNECTION, then + /* + * 3.8.1 says to issue first NETWORK_CONNECTION, then * a SPEED_CHANGE. could be useful in some configs. */ event = req->buf; event->bmRequestType = 0xA1; event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; - event->wValue = __constant_cpu_to_le16 (1); /* connected */ - event->wIndex = __constant_cpu_to_le16 (1); + event->wValue = __constant_cpu_to_le16(1); /* connected */ + event->wIndex = __constant_cpu_to_le16(1); event->wLength = 0; req->length = sizeof *event; req->complete = eth_status_complete; req->context = dev; - value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC); + value = usb_ep_queue(dev->status_ep, req, GFP_ATOMIC); if (value < 0) debug("status buf queue --> %d\n", value); } @@ -993,7 +1003,7 @@ static void issue_start_status (struct eth_dev *dev) /*-------------------------------------------------------------------------*/ -static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req) +static void eth_setup_complete(struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) debug("setup complete --> %d, %d/%d\n", @@ -1010,16 +1020,17 @@ static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req) * - class-specific control requests */ static int -eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +eth_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { - struct eth_dev *dev = get_gadget_data (gadget); + struct eth_dev *dev = get_gadget_data(gadget); struct usb_request *req = dev->req; int value = -EOPNOTSUPP; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); u16 wLength = le16_to_cpu(ctrl->wLength); - /* descriptors just go into the pre-allocated ep0 buffer, + /* + * descriptors just go into the pre-allocated ep0 buffer, * while config change events may enable network traffic. */ @@ -1034,14 +1045,14 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) switch (wValue >> 8) { case USB_DT_DEVICE: - value = min (wLength, (u16) sizeof device_desc); - memcpy (req->buf, &device_desc, value); + value = min(wLength, (u16) sizeof device_desc); + memcpy(req->buf, &device_desc, value); break; case USB_DT_DEVICE_QUALIFIER: if (!gadget_is_dualspeed(gadget)) break; - value = min (wLength, (u16) sizeof dev_qualifier); - memcpy (req->buf, &dev_qualifier, value); + value = min(wLength, (u16) sizeof dev_qualifier); + memcpy(req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: @@ -1054,15 +1065,15 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) wValue & 0xff, gadget_is_otg(gadget)); if (value >= 0) - value = min (wLength, (u16) value); + value = min(wLength, (u16) value); break; case USB_DT_STRING: - value = usb_gadget_get_string (&stringtab, + value = usb_gadget_get_string(&stringtab, wValue & 0xff, req->buf); if (value >= 0) - value = min (wLength, (u16) value); + value = min(wLength, (u16) value); break; } @@ -1075,13 +1086,13 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) debug("HNP available\n"); else if (gadget->a_alt_hnp_support) debug("HNP needs a different root port\n"); - value = eth_set_config (dev, wValue, GFP_ATOMIC); + value = eth_set_config(dev, wValue, GFP_ATOMIC); break; case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != USB_DIR_IN) break; *(u8 *)req->buf = dev->config; - value = min (wLength, (u16) 1); + value = min(wLength, (u16) 1); break; case USB_REQ_SET_INTERFACE: @@ -1092,11 +1103,12 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (!cdc_active(dev) && wIndex != 0) break; - /* PXA hardware partially handles SET_INTERFACE; + /* + * PXA hardware partially handles SET_INTERFACE; * we need to kluge around that interference. */ - if (gadget_is_pxa (gadget)) { - value = eth_set_config (dev, DEV_CONFIG_VALUE, + if (gadget_is_pxa(gadget)) { + value = eth_set_config(dev, DEV_CONFIG_VALUE, GFP_ATOMIC); goto done_set_intf; } @@ -1107,36 +1119,38 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (wValue != 0) break; if (dev->status) { - usb_ep_disable (dev->status_ep); - usb_ep_enable (dev->status_ep, dev->status); + usb_ep_disable(dev->status_ep); + usb_ep_enable(dev->status_ep, dev->status); } value = 0; break; case 1: /* data intf */ if (wValue > 1) break; - usb_ep_disable (dev->in_ep); - usb_ep_disable (dev->out_ep); + usb_ep_disable(dev->in_ep); + usb_ep_disable(dev->out_ep); - /* CDC requires the data transfers not be done from + /* + * CDC requires the data transfers not be done from * the default interface setting ... also, setting * the non-default interface resets filters etc. */ if (wValue == 1) { - if (!cdc_active (dev)) + if (!cdc_active(dev)) break; - usb_ep_enable (dev->in_ep, dev->in); - usb_ep_enable (dev->out_ep, dev->out); + usb_ep_enable(dev->in_ep, dev->in); + usb_ep_enable(dev->out_ep, dev->out); dev->cdc_filter = DEFAULT_FILTER; if (dev->status) - issue_start_status (dev); + issue_start_status(dev); } value = 0; break; } #else - /* FIXME this is wrong, as is the assumption that + /* + * FIXME this is wrong, as is the assumption that * all non-PXA hardware talks real CDC ... */ debug("set_interface ignored!\n"); @@ -1160,12 +1174,13 @@ done_set_intf: /* carrier always ok ...*/ *(u8 *)req->buf = 1 ; } - value = min (wLength, (u16) 1); + value = min(wLength, (u16) 1); break; #ifdef DEV_CONFIG_CDC case USB_CDC_SET_ETHERNET_PACKET_FILTER: - /* see 6.2.30: no data, wIndex = interface, + /* + * see 6.2.30: no data, wIndex = interface, * wValue = packet filter bitmap */ if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE) @@ -1178,7 +1193,8 @@ done_set_intf: value = 0; break; - /* and potentially: + /* + * and potentially: * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS: * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER: @@ -1199,11 +1215,11 @@ done_set_intf: req->length = value; req->zero = value < wLength && (value % gadget->ep0->maxpacket) == 0; - value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); if (value < 0) { debug("ep_queue --> %d\n", value); req->status = 0; - eth_setup_complete (gadget->ep0, req); + eth_setup_complete(gadget->ep0, req); } } @@ -1211,18 +1227,18 @@ done_set_intf: return value; } - /*-------------------------------------------------------------------------*/ -static void rx_complete (struct usb_ep *ep, struct usb_request *req); +static void rx_complete(struct usb_ep *ep, struct usb_request *req); -static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \ +static int rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) { int retval = -ENOMEM; size_t size; - /* Padding up to RX_EXTRA handles minor disagreements with host. + /* + * Padding up to RX_EXTRA handles minor disagreements with host. * Normally we use the USB "terminate on short read" convention; * so allow up to (N*maxpacket), since that memory is normally * already allocated. Some hardware doesn't deal well with short @@ -1236,8 +1252,8 @@ static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \ size += dev->out_ep->maxpacket - 1; size -= size % dev->out_ep->maxpacket; - - /* Some platforms perform better when IP packets are aligned, + /* + * Some platforms perform better when IP packets are aligned, * but on at least one, checksumming fails otherwise. */ @@ -1245,37 +1261,35 @@ static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \ req->length = size; req->complete = rx_complete; - retval = usb_ep_queue (dev->out_ep, req, gfp_flags); + retval = usb_ep_queue(dev->out_ep, req, gfp_flags); - if (retval) { + if (retval) error("rx submit --> %d", retval); - } + return retval; } - -static void rx_complete (struct usb_ep *ep, struct usb_request *req) +static void rx_complete(struct usb_ep *ep, struct usb_request *req) { struct eth_dev *dev = ep->driver_data; debug("%s: status %d\n", __func__, req->status); - packet_received=1; + packet_received = 1; if (req) - dev->rx_req=req; + dev->rx_req = req; } - -static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags) +static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags) { - dev->tx_req = usb_ep_alloc_request (dev->in_ep, 0); + dev->tx_req = usb_ep_alloc_request(dev->in_ep, 0); if (!dev->tx_req) goto fail; - dev->rx_req = usb_ep_alloc_request (dev->out_ep, 0); + dev->rx_req = usb_ep_alloc_request(dev->out_ep, 0); if (!dev->rx_req) goto fail; @@ -1287,17 +1301,16 @@ fail: return -1; } - -static void tx_complete (struct usb_ep *ep, struct usb_request *req) +static void tx_complete(struct usb_ep *ep, struct usb_request *req) { - debug("%s: status %s\n", __func__, (req->status)?"failed":"ok"); - packet_sent=1; + debug("%s: status %s\n", __func__, (req->status) ? "failed" : "ok"); + packet_sent = 1; } -static inline int eth_is_promisc (struct eth_dev *dev) +static inline int eth_is_promisc(struct eth_dev *dev) { /* no filters for the CDC subset; always promisc */ - if (subset_active (dev)) + if (subset_active(dev)) return 1; return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; } @@ -1415,49 +1428,49 @@ drop: /*-------------------------------------------------------------------------*/ #endif -static void eth_unbind (struct usb_gadget *gadget) +static void eth_unbind(struct usb_gadget *gadget) { - struct eth_dev *dev = get_gadget_data (gadget); + struct eth_dev *dev = get_gadget_data(gadget); debug("%s...\n", __func__); /* we've already been disconnected ... no i/o is active */ if (dev->req) { - usb_ep_free_request (gadget->ep0, dev->req); + usb_ep_free_request(gadget->ep0, dev->req); dev->req = NULL; } if (dev->stat_req) { - usb_ep_free_request (dev->status_ep, dev->stat_req); + usb_ep_free_request(dev->status_ep, dev->stat_req); dev->stat_req = NULL; } if (dev->tx_req) { - usb_ep_free_request (dev->in_ep, dev->tx_req); - dev->tx_req=NULL; + usb_ep_free_request(dev->in_ep, dev->tx_req); + dev->tx_req = NULL; } if (dev->rx_req) { - usb_ep_free_request (dev->out_ep, dev->rx_req); - dev->rx_req=NULL; + usb_ep_free_request(dev->out_ep, dev->rx_req); + dev->rx_req = NULL; } /* unregister_netdev (dev->net);*/ /* free_netdev(dev->net);*/ - set_gadget_data (gadget, NULL); + set_gadget_data(gadget, NULL); } -static void eth_disconnect (struct usb_gadget *gadget) +static void eth_disconnect(struct usb_gadget *gadget) { - eth_reset_config (get_gadget_data (gadget)); + eth_reset_config(get_gadget_data(gadget)); } -static void eth_suspend (struct usb_gadget *gadget) +static void eth_suspend(struct usb_gadget *gadget) { /* Not used */ } -static void eth_resume (struct usb_gadget *gadget) +static void eth_resume(struct usb_gadget *gadget) { /* Not used */ } @@ -1492,12 +1505,12 @@ static int is_eth_addr_valid(char *str) return 0; } -static u8 nibble (unsigned char c) +static u8 nibble(unsigned char c) { - if (likely (isdigit (c))) + if (likely(isdigit(c))) return c - '0'; - c = toupper (c); - if (likely (isxdigit (c))) + c = toupper(c); + if (likely(isxdigit(c))) return 10 + c - 'A'; return 0; } @@ -1510,13 +1523,13 @@ static int get_ether_addr(const char *str, u8 *dev_addr) for (i = 0; i < 6; i++) { unsigned char num; - if((*str == '.') || (*str == ':')) + if ((*str == '.') || (*str == ':')) str++; num = nibble(*str++) << 4; num |= (nibble(*str++)); - dev_addr [i] = num; + dev_addr[i] = num; } - if (is_valid_ether_addr (dev_addr)) + if (is_valid_ether_addr(dev_addr)) return 0; } return 1; @@ -1528,17 +1541,18 @@ static int eth_bind(struct usb_gadget *gadget) u8 cdc = 1, zlp = 1; struct usb_ep *in_ep, *out_ep, *status_ep = NULL; int gcnum; - u8 tmp[7]; + u8 tmp[7]; /* these flags are only ever cleared; compiler take note */ #ifndef DEV_CONFIG_CDC cdc = 0; #endif - /* Because most host side USB stacks handle CDC Ethernet, that + /* + * Because most host side USB stacks handle CDC Ethernet, that * standard protocol is _strongly_ preferred for interop purposes. * (By everyone except Microsoft.) */ - if (gadget_is_pxa (gadget)) { + if (gadget_is_pxa(gadget)) { /* pxa doesn't support altsettings */ cdc = 0; } else if (gadget_is_musbhdrc(gadget)) { @@ -1547,20 +1561,22 @@ static int eth_bind(struct usb_gadget *gadget) } else if (gadget_is_sh(gadget)) { /* sh doesn't support multiple interfaces or configs */ cdc = 0; - } else if (gadget_is_sa1100 (gadget)) { + } else if (gadget_is_sa1100(gadget)) { /* hardware can't write zlps */ zlp = 0; - /* sa1100 CAN do CDC, without status endpoint ... we use + /* + * sa1100 CAN do CDC, without status endpoint ... we use * non-CDC to be compatible with ARM Linux-2.4 "usb-eth". */ cdc = 0; } - gcnum = usb_gadget_controller_number (gadget); + gcnum = usb_gadget_controller_number(gadget); if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16 (0x0300 + gcnum); + device_desc.bcdDevice = cpu_to_le16(0x0300 + gcnum); else { - /* can't assume CDC works. don't want to default to + /* + * can't assume CDC works. don't want to default to * anything less functional on CDC-capable hardware, * so we fail in this case. */ @@ -1569,7 +1585,8 @@ static int eth_bind(struct usb_gadget *gadget) return -ENODEV; } - /* CDC subset ... recognized by Linux since 2.4.10, but Windows + /* + * CDC subset ... recognized by Linux since 2.4.10, but Windows * drivers aren't widely available. (That may be improved by * supporting one submode of the "SAFE" variant of MDLM.) */ @@ -1588,17 +1605,17 @@ static int eth_bind(struct usb_gadget *gadget) if (bcdDevice) device_desc.bcdDevice = cpu_to_le16(bcdDevice); if (iManufacturer) - strlcpy (manufacturer, iManufacturer, sizeof manufacturer); + strlcpy(manufacturer, iManufacturer, sizeof manufacturer); if (iProduct) - strlcpy (product_desc, iProduct, sizeof product_desc); + strlcpy(product_desc, iProduct, sizeof product_desc); if (iSerialNumber) { device_desc.iSerialNumber = STRING_SERIALNUMBER, strlcpy(serial_number, iSerialNumber, sizeof serial_number); } /* all we really need is bulk IN/OUT */ - usb_ep_autoconfig_reset (gadget); - in_ep = usb_ep_autoconfig (gadget, &fs_source_desc); + usb_ep_autoconfig_reset(gadget); + in_ep = usb_ep_autoconfig(gadget, &fs_source_desc); if (!in_ep) { autoconf_fail: error("can't autoconfigure on %s\n", @@ -1607,17 +1624,18 @@ autoconf_fail: } in_ep->driver_data = in_ep; /* claim */ - out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc); + out_ep = usb_ep_autoconfig(gadget, &fs_sink_desc); if (!out_ep) goto autoconf_fail; out_ep->driver_data = out_ep; /* claim */ #if defined(DEV_CONFIG_CDC) - /* CDC Ethernet control interface doesn't require a status endpoint. + /* + * CDC Ethernet control interface doesn't require a status endpoint. * Since some hosts expect one, try to allocate one anyway. */ if (cdc) { - status_ep = usb_ep_autoconfig (gadget, &fs_status_desc); + status_ep = usb_ep_autoconfig(gadget, &fs_status_desc); if (status_ep) { status_ep->driver_data = status_ep; /* claim */ } else if (cdc) { @@ -1632,7 +1650,8 @@ autoconf_fail: eth_config.bNumInterfaces = 1; eth_config.iConfiguration = STRING_SUBSET; - /* use functions to set these up, in case we're built to work + /* + * use functions to set these up, in case we're built to work * with multiple controllers and must override CDC Ethernet. */ fs_subset_descriptors(); @@ -1640,7 +1659,7 @@ autoconf_fail: } device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; - usb_gadget_set_selfpowered (gadget); + usb_gadget_set_selfpowered(gadget); if (gadget_is_dualspeed(gadget)) { if (!cdc) @@ -1668,7 +1687,7 @@ autoconf_fail: } dev->net = &l_netdev; - strcpy (dev->net->name, USB_NET_NAME); + strcpy(dev->net->name, USB_NET_NAME); dev->cdc = cdc; dev->zlp = zlp; @@ -1677,7 +1696,8 @@ autoconf_fail: dev->out_ep = out_ep; dev->status_ep = status_ep; - /* Module params for these addresses should come from ID proms. + /* + * Module params for these addresses should come from ID proms. * The host side address is used with CDC, and commonly * ends up in a persistent config database. It's not clear if * host side code for the SAFE thing cares -- its original BLAN @@ -1690,10 +1710,10 @@ autoconf_fail: get_ether_addr(host_addr, dev->host_mac); - sprintf (ethaddr, "%02X%02X%02X%02X%02X%02X", - dev->host_mac [0], dev->host_mac [1], - dev->host_mac [2], dev->host_mac [3], - dev->host_mac [4], dev->host_mac [5]); + sprintf(ethaddr, "%02X%02X%02X%02X%02X%02X", + dev->host_mac[0], dev->host_mac[1], + dev->host_mac[2], dev->host_mac[3], + dev->host_mac[4], dev->host_mac[5]); printf("using %s, OUT %s IN %s%s%s\n", gadget->name, out_ep->name, in_ep->name, @@ -1701,23 +1721,25 @@ autoconf_fail: status_ep ? status_ep->name : "" ); printf("MAC %02x:%02x:%02x:%02x:%02x:%02x\n", - dev->net->enetaddr [0], dev->net->enetaddr [1], - dev->net->enetaddr [2], dev->net->enetaddr [3], - dev->net->enetaddr [4], dev->net->enetaddr [5]); + dev->net->enetaddr[0], dev->net->enetaddr[1], + dev->net->enetaddr[2], dev->net->enetaddr[3], + dev->net->enetaddr[4], dev->net->enetaddr[5]); if (cdc) { printf("HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n", - dev->host_mac [0], dev->host_mac [1], - dev->host_mac [2], dev->host_mac [3], - dev->host_mac [4], dev->host_mac [5]); + dev->host_mac[0], dev->host_mac[1], + dev->host_mac[2], dev->host_mac[3], + dev->host_mac[4], dev->host_mac[5]); } - /* use PKTSIZE (or aligned... from u-boot) and set - * wMaxSegmentSize accordingly*/ + /* + * use PKTSIZE (or aligned... from u-boot) and set + * wMaxSegmentSize accordingly + */ dev->mtu = PKTSIZE_ALIGN; /* RNDIS does not like this, only 1514, TODO*/ /* preallocate control message data and buffer */ - dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); + dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); if (!dev->req) goto fail; dev->req->buf = control_req; @@ -1726,9 +1748,10 @@ autoconf_fail: /* ... and maybe likewise for status transfer */ #if defined(DEV_CONFIG_CDC) if (dev->status_ep) { - dev->stat_req = usb_ep_alloc_request(dev->status_ep, GFP_KERNEL); + dev->stat_req = usb_ep_alloc_request(dev->status_ep, + GFP_KERNEL); if (!dev->stat_req) { - usb_ep_free_request (dev->status_ep, dev->req); + usb_ep_free_request(dev->status_ep, dev->req); goto fail; } @@ -1739,10 +1762,11 @@ autoconf_fail: /* finish hookup to lower layer ... */ dev->gadget = gadget; - set_gadget_data (gadget, dev); + set_gadget_data(gadget, dev); gadget->ep0->driver_data = dev; - /* two kinds of host-initiated state changes: + /* + * two kinds of host-initiated state changes: * - iff DATA transfer is active, carrier is "on" * - tx queueing enabled if open *and* carrier is "on" */ @@ -1750,13 +1774,13 @@ autoconf_fail: fail: error("%s failed", __func__); - eth_unbind (gadget); + eth_unbind(gadget); return -ENOMEM; } -static int usb_eth_init(struct eth_device* netdev, bd_t* bd) +static int usb_eth_init(struct eth_device *netdev, bd_t *bd) { - struct eth_dev *dev=&l_ethdev; + struct eth_dev *dev = &l_ethdev; struct usb_gadget *gadget; unsigned long ts; unsigned long timeout = USB_CONNECT_TIMEOUT; @@ -1780,8 +1804,7 @@ static int usb_eth_init(struct eth_device* netdev, bd_t* bd) timeout = simple_strtoul(getenv("cdc_connect_timeout"), NULL, 10) * CONFIG_SYS_HZ; ts = get_timer(0); - while (!l_ethdev.network_started) - { + while (!l_ethdev.network_started) { /* Handle control-c and timeouts */ if (ctrlc() || (get_timer(ts) > timeout)) { error("The remote end did not respond in time."); @@ -1790,19 +1813,20 @@ static int usb_eth_init(struct eth_device* netdev, bd_t* bd) usb_gadget_handle_interrupts(); } - rx_submit (dev, dev->rx_req, 0); + rx_submit(dev, dev->rx_req, 0); return 0; fail: return -1; } -static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int length) +static int usb_eth_send(struct eth_device *netdev, + volatile void *packet, int length) { int retval; struct usb_request *req = NULL; struct eth_dev *dev = &l_ethdev; - unsigned long ts; - unsigned long timeout = USB_CONNECT_TIMEOUT; + unsigned long ts; + unsigned long timeout = USB_CONNECT_TIMEOUT; debug("%s:...\n", __func__); @@ -1812,7 +1836,8 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le req->context = NULL; req->complete = tx_complete; - /* use zlp framing on tx for strict CDC-Ether conformance, + /* + * use zlp framing on tx for strict CDC-Ether conformance, * though any robust network rx path ignores extra padding. * and some hardware doesn't like to write zlps. */ @@ -1827,54 +1852,50 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH) ? ((dev->tx_qlen % qmult) != 0) : 0; #endif - dev->tx_qlen=1; - ts = get_timer(0); - packet_sent = 0; + dev->tx_qlen = 1; + ts = get_timer(0); + packet_sent = 0; - retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); + retval = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC); if (!retval) debug("%s: packet queued\n", __func__); - while(!packet_sent) - { - if (get_timer(ts) > timeout) { - printf("timeout sending packets to usb ethernet\n"); - return -1; - } - usb_gadget_handle_interrupts(); + while (!packet_sent) { + if (get_timer(ts) > timeout) { + printf("timeout sending packets to usb ethernet\n"); + return -1; + } + usb_gadget_handle_interrupts(); } return 0; } -static int usb_eth_recv(struct eth_device* netdev) +static int usb_eth_recv(struct eth_device *netdev) { struct eth_dev *dev = &l_ethdev; usb_gadget_handle_interrupts(); - if (packet_received) - { - debug("%s: packet received \n", __func__); - if (dev->rx_req) - { - NetReceive(NetRxPackets[0],dev->rx_req->length); - packet_received=0; + if (packet_received) { + debug("%s: packet received\n", __func__); + if (dev->rx_req) { + NetReceive(NetRxPackets[0], dev->rx_req->length); + packet_received = 0; if (dev->rx_req) - rx_submit (dev, dev->rx_req, 0); - } - else error("dev->rx_req invalid"); + rx_submit(dev, dev->rx_req, 0); + } else + error("dev->rx_req invalid"); } return 0; } -void usb_eth_halt(struct eth_device* netdev) +void usb_eth_halt(struct eth_device *netdev) { - struct eth_dev *dev =&l_ethdev; + struct eth_dev *dev = &l_ethdev; - if (!netdev) - { + if (!netdev) { error("received NULL ptr"); return; } @@ -1898,9 +1919,9 @@ static struct usb_gadget_driver eth_driver = { int usb_eth_initialize(bd_t *bi) { int status = 0; - struct eth_device *netdev=&l_netdev; + struct eth_device *netdev = &l_netdev; - sprintf(netdev->name,"usb_ether"); + sprintf(netdev->name, "usb_ether"); netdev->init = usb_eth_init; netdev->send = usb_eth_send; |