diff options
Diffstat (limited to 'drivers/usb/eth/r8152.h')
| -rw-r--r-- | drivers/usb/eth/r8152.h | 631 |
1 files changed, 631 insertions, 0 deletions
diff --git a/drivers/usb/eth/r8152.h b/drivers/usb/eth/r8152.h new file mode 100644 index 0000000..cd44da2 --- /dev/null +++ b/drivers/usb/eth/r8152.h @@ -0,0 +1,631 @@ +/* + * Copyright (c) 2015 Realtek Semiconductor Corp. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0 + * + */ + +#ifndef _RTL8152_ETH_H +#define _RTL8152_ETH_H + +#define R8152_BASE_NAME "r8152" + +#define PLA_IDR 0xc000 +#define PLA_RCR 0xc010 +#define PLA_RMS 0xc016 +#define PLA_RXFIFO_CTRL0 0xc0a0 +#define PLA_RXFIFO_CTRL1 0xc0a4 +#define PLA_RXFIFO_CTRL2 0xc0a8 +#define PLA_DMY_REG0 0xc0b0 +#define PLA_FMC 0xc0b4 +#define PLA_CFG_WOL 0xc0b6 +#define PLA_TEREDO_CFG 0xc0bc +#define PLA_MAR 0xcd00 +#define PLA_BACKUP 0xd000 +#define PAL_BDC_CR 0xd1a0 +#define PLA_TEREDO_TIMER 0xd2cc +#define PLA_REALWOW_TIMER 0xd2e8 +#define PLA_LEDSEL 0xdd90 +#define PLA_LED_FEATURE 0xdd92 +#define PLA_PHYAR 0xde00 +#define PLA_BOOT_CTRL 0xe004 +#define PLA_GPHY_INTR_IMR 0xe022 +#define PLA_EEE_CR 0xe040 +#define PLA_EEEP_CR 0xe080 +#define PLA_MAC_PWR_CTRL 0xe0c0 +#define PLA_MAC_PWR_CTRL2 0xe0ca +#define PLA_MAC_PWR_CTRL3 0xe0cc +#define PLA_MAC_PWR_CTRL4 0xe0ce +#define PLA_WDT6_CTRL 0xe428 +#define PLA_TCR0 0xe610 +#define PLA_TCR1 0xe612 +#define PLA_MTPS 0xe615 +#define PLA_TXFIFO_CTRL 0xe618 +#define PLA_RSTTALLY 0xe800 +#define BIST_CTRL 0xe810 +#define PLA_CR 0xe813 +#define PLA_CRWECR 0xe81c +#define PLA_CONFIG12 0xe81e /* CONFIG1, CONFIG2 */ +#define PLA_CONFIG34 0xe820 /* CONFIG3, CONFIG4 */ +#define PLA_CONFIG5 0xe822 +#define PLA_PHY_PWR 0xe84c +#define PLA_OOB_CTRL 0xe84f +#define PLA_CPCR 0xe854 +#define PLA_MISC_0 0xe858 +#define PLA_MISC_1 0xe85a +#define PLA_OCP_GPHY_BASE 0xe86c +#define PLA_TALLYCNT 0xe890 +#define PLA_SFF_STS_7 0xe8de +#define PLA_PHYSTATUS 0xe908 +#define PLA_BP_BA 0xfc26 +#define PLA_BP_0 0xfc28 +#define PLA_BP_1 0xfc2a +#define PLA_BP_2 0xfc2c +#define PLA_BP_3 0xfc2e +#define PLA_BP_4 0xfc30 +#define PLA_BP_5 0xfc32 +#define PLA_BP_6 0xfc34 +#define PLA_BP_7 0xfc36 +#define PLA_BP_EN 0xfc38 + +#define USB_USB2PHY 0xb41e +#define USB_SSPHYLINK2 0xb428 +#define USB_U2P3_CTRL 0xb460 +#define USB_CSR_DUMMY1 0xb464 +#define USB_CSR_DUMMY2 0xb466 +#define USB_DEV_STAT 0xb808 +#define USB_CONNECT_TIMER 0xcbf8 +#define USB_BURST_SIZE 0xcfc0 +#define USB_USB_CTRL 0xd406 +#define USB_PHY_CTRL 0xd408 +#define USB_TX_AGG 0xd40a +#define USB_RX_BUF_TH 0xd40c +#define USB_USB_TIMER 0xd428 +#define USB_RX_EARLY_TIMEOUT 0xd42c +#define USB_RX_EARLY_SIZE 0xd42e +#define USB_PM_CTRL_STATUS 0xd432 +#define USB_TX_DMA 0xd434 +#define USB_TOLERANCE 0xd490 +#define USB_LPM_CTRL 0xd41a +#define USB_UPS_CTRL 0xd800 +#define USB_MISC_0 0xd81a +#define USB_POWER_CUT 0xd80a +#define USB_AFE_CTRL2 0xd824 +#define USB_WDT11_CTRL 0xe43c +#define USB_BP_BA 0xfc26 +#define USB_BP_0 0xfc28 +#define USB_BP_1 0xfc2a +#define USB_BP_2 0xfc2c +#define USB_BP_3 0xfc2e +#define USB_BP_4 0xfc30 +#define USB_BP_5 0xfc32 +#define USB_BP_6 0xfc34 +#define USB_BP_7 0xfc36 +#define USB_BP_EN 0xfc38 + +/* OCP Registers */ +#define OCP_ALDPS_CONFIG 0x2010 +#define OCP_EEE_CONFIG1 0x2080 +#define OCP_EEE_CONFIG2 0x2092 +#define OCP_EEE_CONFIG3 0x2094 +#define OCP_BASE_MII 0xa400 +#define OCP_EEE_AR 0xa41a +#define OCP_EEE_DATA 0xa41c +#define OCP_PHY_STATUS 0xa420 +#define OCP_POWER_CFG 0xa430 +#define OCP_EEE_CFG 0xa432 +#define OCP_SRAM_ADDR 0xa436 +#define OCP_SRAM_DATA 0xa438 +#define OCP_DOWN_SPEED 0xa442 +#define OCP_EEE_ABLE 0xa5c4 +#define OCP_EEE_ADV 0xa5d0 +#define OCP_EEE_LPABLE 0xa5d2 +#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */ +#define OCP_ADC_CFG 0xbc06 + +/* SRAM Register */ +#define SRAM_LPF_CFG 0x8012 +#define SRAM_10M_AMP1 0x8080 +#define SRAM_10M_AMP2 0x8082 +#define SRAM_IMPEDANCE 0x8084 + +/* PLA_RCR */ +#define RCR_AAP 0x00000001 +#define RCR_APM 0x00000002 +#define RCR_AM 0x00000004 +#define RCR_AB 0x00000008 +#define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB) + +/* PLA_RXFIFO_CTRL0 */ +#define RXFIFO_THR1_NORMAL 0x00080002 +#define RXFIFO_THR1_OOB 0x01800003 + +/* PLA_RXFIFO_CTRL1 */ +#define RXFIFO_THR2_FULL 0x00000060 +#define RXFIFO_THR2_HIGH 0x00000038 +#define RXFIFO_THR2_OOB 0x0000004a +#define RXFIFO_THR2_NORMAL 0x00a0 + +/* PLA_RXFIFO_CTRL2 */ +#define RXFIFO_THR3_FULL 0x00000078 +#define RXFIFO_THR3_HIGH 0x00000048 +#define RXFIFO_THR3_OOB 0x0000005a +#define RXFIFO_THR3_NORMAL 0x0110 + +/* PLA_TXFIFO_CTRL */ +#define TXFIFO_THR_NORMAL 0x00400008 +#define TXFIFO_THR_NORMAL2 0x01000008 + +/* PLA_DMY_REG0 */ +#define ECM_ALDPS 0x0002 + +/* PLA_FMC */ +#define FMC_FCR_MCU_EN 0x0001 + +/* PLA_EEEP_CR */ +#define EEEP_CR_EEEP_TX 0x0002 + +/* PLA_WDT6_CTRL */ +#define WDT6_SET_MODE 0x0010 + +/* PLA_TCR0 */ +#define TCR0_TX_EMPTY 0x0800 +#define TCR0_AUTO_FIFO 0x0080 + +/* PLA_TCR1 */ +#define VERSION_MASK 0x7cf0 + +/* PLA_MTPS */ +#define MTPS_JUMBO (12 * 1024 / 64) +#define MTPS_DEFAULT (6 * 1024 / 64) + +/* PLA_RSTTALLY */ +#define TALLY_RESET 0x0001 + +/* PLA_CR */ +#define PLA_CR_RST 0x10 +#define PLA_CR_RE 0x08 +#define PLA_CR_TE 0x04 + +/* PLA_BIST_CTRL */ +#define BIST_CTRL_SW_RESET (0x10 << 24) + +/* PLA_CRWECR */ +#define CRWECR_NORAML 0x00 +#define CRWECR_CONFIG 0xc0 + +/* PLA_OOB_CTRL */ +#define NOW_IS_OOB 0x80 +#define TXFIFO_EMPTY 0x20 +#define RXFIFO_EMPTY 0x10 +#define LINK_LIST_READY 0x02 +#define DIS_MCU_CLROOB 0x01 +#define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY) + +/* PLA_PHY_PWR */ +#define PLA_PHY_PWR_LLR (LINK_LIST_READY << 24) +#define PLA_PHY_PWR_TXEMP (TXFIFO_EMPTY << 24) + +/* PLA_MISC_1 */ +#define RXDY_GATED_EN 0x0008 + +/* PLA_SFF_STS_7 */ +#define RE_INIT_LL 0x8000 +#define MCU_BORW_EN 0x4000 + +/* PLA_CPCR */ +#define CPCR_RX_VLAN 0x0040 + +/* PLA_CFG_WOL */ +#define MAGIC_EN 0x0001 + +/* PLA_TEREDO_CFG */ +#define TEREDO_SEL 0x8000 +#define TEREDO_WAKE_MASK 0x7f00 +#define TEREDO_RS_EVENT_MASK 0x00fe +#define OOB_TEREDO_EN 0x0001 + +/* PAL_BDC_CR */ +#define ALDPS_PROXY_MODE 0x0001 + +/* PLA_CONFIG34 */ +#define LINK_ON_WAKE_EN 0x0010 +#define LINK_OFF_WAKE_EN 0x0008 + +/* PLA_CONFIG5 */ +#define BWF_EN 0x0040 +#define MWF_EN 0x0020 +#define UWF_EN 0x0010 +#define LAN_WAKE_EN 0x0002 + +/* PLA_LED_FEATURE */ +#define LED_MODE_MASK 0x0700 + +/* PLA_PHY_PWR */ +#define TX_10M_IDLE_EN 0x0080 +#define PFM_PWM_SWITCH 0x0040 + +/* PLA_MAC_PWR_CTRL */ +#define D3_CLK_GATED_EN 0x00004000 +#define MCU_CLK_RATIO 0x07010f07 +#define MCU_CLK_RATIO_MASK 0x0f0f0f0f +#define ALDPS_SPDWN_RATIO 0x0f87 + +/* PLA_MAC_PWR_CTRL2 */ +#define EEE_SPDWN_RATIO 0x8007 + +/* PLA_MAC_PWR_CTRL3 */ +#define PKT_AVAIL_SPDWN_EN 0x0100 +#define SUSPEND_SPDWN_EN 0x0004 +#define U1U2_SPDWN_EN 0x0002 +#define L1_SPDWN_EN 0x0001 + +/* PLA_MAC_PWR_CTRL4 */ +#define PWRSAVE_SPDWN_EN 0x1000 +#define RXDV_SPDWN_EN 0x0800 +#define TX10MIDLE_EN 0x0100 +#define TP100_SPDWN_EN 0x0020 +#define TP500_SPDWN_EN 0x0010 +#define TP1000_SPDWN_EN 0x0008 +#define EEE_SPDWN_EN 0x0001 + +/* PLA_GPHY_INTR_IMR */ +#define GPHY_STS_MSK 0x0001 +#define SPEED_DOWN_MSK 0x0002 +#define SPDWN_RXDV_MSK 0x0004 +#define SPDWN_LINKCHG_MSK 0x0008 + +/* PLA_PHYAR */ +#define PHYAR_FLAG 0x80000000 + +/* PLA_EEE_CR */ +#define EEE_RX_EN 0x0001 +#define EEE_TX_EN 0x0002 + +/* PLA_BOOT_CTRL */ +#define AUTOLOAD_DONE 0x0002 + +/* USB_USB2PHY */ +#define USB2PHY_SUSPEND 0x0001 +#define USB2PHY_L1 0x0002 + +/* USB_SSPHYLINK2 */ +#define pwd_dn_scale_mask 0x3ffe +#define pwd_dn_scale(x) ((x) << 1) + +/* USB_CSR_DUMMY1 */ +#define DYNAMIC_BURST 0x0001 + +/* USB_CSR_DUMMY2 */ +#define EP4_FULL_FC 0x0001 + +/* USB_DEV_STAT */ +#define STAT_SPEED_MASK 0x0006 +#define STAT_SPEED_HIGH 0x0000 +#define STAT_SPEED_FULL 0x0002 + +/* USB_TX_AGG */ +#define TX_AGG_MAX_THRESHOLD 0x03 + +/* USB_RX_BUF_TH */ +#define RX_THR_SUPPER 0x0c350180 +#define RX_THR_HIGH 0x7a120180 +#define RX_THR_SLOW 0xffff0180 + +/* USB_TX_DMA */ +#define TEST_MODE_DISABLE 0x00000001 +#define TX_SIZE_ADJUST1 0x00000100 + +/* USB_UPS_CTRL */ +#define POWER_CUT 0x0100 + +/* USB_PM_CTRL_STATUS */ +#define RESUME_INDICATE 0x0001 + +/* USB_USB_CTRL */ +#define RX_AGG_DISABLE 0x0010 +#define RX_ZERO_EN 0x0080 + +/* USB_U2P3_CTRL */ +#define U2P3_ENABLE 0x0001 + +/* USB_POWER_CUT */ +#define PWR_EN 0x0001 +#define PHASE2_EN 0x0008 + +/* USB_MISC_0 */ +#define PCUT_STATUS 0x0001 + +/* USB_RX_EARLY_TIMEOUT */ +#define COALESCE_SUPER 85000U +#define COALESCE_HIGH 250000U +#define COALESCE_SLOW 524280U + +/* USB_WDT11_CTRL */ +#define TIMER11_EN 0x0001 + +/* USB_LPM_CTRL */ +/* bit 4 ~ 5: fifo empty boundary */ +#define FIFO_EMPTY_1FB 0x30 /* 0x1fb * 64 = 32448 bytes */ +/* bit 2 ~ 3: LMP timer */ +#define LPM_TIMER_MASK 0x0c +#define LPM_TIMER_500MS 0x04 /* 500 ms */ +#define LPM_TIMER_500US 0x0c /* 500 us */ +#define ROK_EXIT_LPM 0x02 + +/* USB_AFE_CTRL2 */ +#define SEN_VAL_MASK 0xf800 +#define SEN_VAL_NORMAL 0xa000 +#define SEL_RXIDLE 0x0100 + +/* OCP_ALDPS_CONFIG */ +#define ENPWRSAVE 0x8000 +#define ENPDNPS 0x0200 +#define LINKENA 0x0100 +#define DIS_SDSAVE 0x0010 + +/* OCP_PHY_STATUS */ +#define PHY_STAT_MASK 0x0007 +#define PHY_STAT_LAN_ON 3 +#define PHY_STAT_PWRDN 5 + +/* OCP_POWER_CFG */ +#define EEE_CLKDIV_EN 0x8000 +#define EN_ALDPS 0x0004 +#define EN_10M_PLLOFF 0x0001 + +/* OCP_EEE_CONFIG1 */ +#define RG_TXLPI_MSK_HFDUP 0x8000 +#define RG_MATCLR_EN 0x4000 +#define EEE_10_CAP 0x2000 +#define EEE_NWAY_EN 0x1000 +#define TX_QUIET_EN 0x0200 +#define RX_QUIET_EN 0x0100 +#define sd_rise_time_mask 0x0070 +#define sd_rise_time(x) (min((x), 7) << 4) /* bit 4 ~ 6 */ +#define RG_RXLPI_MSK_HFDUP 0x0008 +#define SDFALLTIME 0x0007 /* bit 0 ~ 2 */ + +/* OCP_EEE_CONFIG2 */ +#define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */ +#define RG_DACQUIET_EN 0x0400 +#define RG_LDVQUIET_EN 0x0200 +#define RG_CKRSEL 0x0020 +#define RG_EEEPRG_EN 0x0010 + +/* OCP_EEE_CONFIG3 */ +#define fast_snr_mask 0xff80 +#define fast_snr(x) (min((x), 0x1ff) << 7) /* bit 7 ~ 15 */ +#define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */ +#define MSK_PH 0x0006 /* bit 0 ~ 3 */ + +/* OCP_EEE_AR */ +/* bit[15:14] function */ +#define FUN_ADDR 0x0000 +#define FUN_DATA 0x4000 +/* bit[4:0] device addr */ + +/* OCP_EEE_CFG */ +#define CTAP_SHORT_EN 0x0040 +#define EEE10_EN 0x0010 + +/* OCP_DOWN_SPEED */ +#define EN_10M_BGOFF 0x0080 + +/* OCP_PHY_STATE */ +#define TXDIS_STATE 0x01 +#define ABD_STATE 0x02 + +/* OCP_ADC_CFG */ +#define CKADSEL_L 0x0100 +#define ADC_EN 0x0080 +#define EN_EMI_L 0x0040 + +/* SRAM_LPF_CFG */ +#define LPF_AUTO_TUNE 0x8000 + +/* SRAM_10M_AMP1 */ +#define GDAC_IB_UPALL 0x0008 + +/* SRAM_10M_AMP2 */ +#define AMP_DN 0x0200 + +/* SRAM_IMPEDANCE */ +#define RX_DRIVING_MASK 0x6000 + +#define RTL8152_MAX_TX 4 +#define RTL8152_MAX_RX 10 +#define INTBUFSIZE 2 +#define CRC_SIZE 4 +#define TX_ALIGN 4 +#define RX_ALIGN 8 + +#define INTR_LINK 0x0004 + +#define RTL8152_REQT_READ 0xc0 +#define RTL8152_REQT_WRITE 0x40 +#define RTL8152_REQ_GET_REGS 0x05 +#define RTL8152_REQ_SET_REGS 0x05 + +#define BYTE_EN_DWORD 0xff +#define BYTE_EN_WORD 0x33 +#define BYTE_EN_BYTE 0x11 +#define BYTE_EN_SIX_BYTES 0x3f +#define BYTE_EN_START_MASK 0x0f +#define BYTE_EN_END_MASK 0xf0 + +#define RTL8152_ETH_FRAME_LEN 1514 +#define RTL8152_AGG_BUF_SZ 2048 + +#define RTL8152_RMS (RTL8152_ETH_FRAME_LEN + CRC_SIZE) +#define RTL8153_RMS (RTL8152_ETH_FRAME_LEN + CRC_SIZE) +#define RTL8152_TX_TIMEOUT (5 * HZ) + +#define MCU_TYPE_PLA 0x0100 +#define MCU_TYPE_USB 0x0000 + +/* The forced speed, 10Mb, 100Mb, gigabit. */ +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 + +#define SPEED_UNKNOWN -1 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 +#define DUPLEX_UNKNOWN 0xff + +/* Enable or disable autonegotiation. */ +#define AUTONEG_DISABLE 0x00 +#define AUTONEG_ENABLE 0x01 + +/* Generic MII registers. */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ +#define MII_ESTATUS 0x0f /* Extended Status */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ + +#define TIMEOUT_RESOLUTION 50 +#define PHY_CONNECT_TIMEOUT 5000 +#define USB_BULK_SEND_TIMEOUT 5000 +#define USB_BULK_RECV_TIMEOUT 5000 +#define R8152_WAIT_TIMEOUT 2000 + +struct rx_desc { + __le32 opts1; +#define RD_CRC BIT(15) +#define RX_LEN_MASK 0x7fff + + __le32 opts2; +#define RD_UDP_CS BIT(23) +#define RD_TCP_CS BIT(22) +#define RD_IPV6_CS BIT(20) +#define RD_IPV4_CS BIT(19) + + __le32 opts3; +#define IPF BIT(23) /* IP checksum fail */ +#define UDPF BIT(22) /* UDP checksum fail */ +#define TCPF BIT(21) /* TCP checksum fail */ +#define RX_VLAN_TAG BIT(16) + + __le32 opts4; + __le32 opts5; + __le32 opts6; +}; + +struct tx_desc { + __le32 opts1; +#define TX_FS BIT(31) /* First segment of a packet */ +#define TX_LS BIT(30) /* Final segment of a packet */ +#define LGSEND BIT(29) +#define GTSENDV4 BIT(28) +#define GTSENDV6 BIT(27) +#define GTTCPHO_SHIFT 18 +#define GTTCPHO_MAX 0x7fU +#define TX_LEN_MAX 0x3ffffU + + __le32 opts2; +#define UDP_CS BIT(31) /* Calculate UDP/IP checksum */ +#define TCP_CS BIT(30) /* Calculate TCP/IP checksum */ +#define IPV4_CS BIT(29) /* Calculate IPv4 checksum */ +#define IPV6_CS BIT(28) /* Calculate IPv6 checksum */ +#define MSS_SHIFT 17 +#define MSS_MAX 0x7ffU +#define TCPHO_SHIFT 17 +#define TCPHO_MAX 0x7ffU +#define TX_VLAN_TAG BIT(16) +}; + +enum rtl_version { + RTL_VER_UNKNOWN = 0, + RTL_VER_01, + RTL_VER_02, + RTL_VER_03, + RTL_VER_04, + RTL_VER_05, + RTL_VER_06, + RTL_VER_07, + RTL_VER_MAX +}; + +enum rtl_register_content { + _1000bps = 0x10, + _100bps = 0x08, + _10bps = 0x04, + LINK_STATUS = 0x02, + FULL_DUP = 0x01, +}; + +struct r8152 { + struct usb_device *udev; + struct usb_interface *intf; + bool supports_gmii; + + struct rtl_ops { + void (*init)(struct r8152 *); + int (*enable)(struct r8152 *); + void (*disable)(struct r8152 *); + void (*up)(struct r8152 *); + void (*down)(struct r8152 *); + void (*unload)(struct r8152 *); + } rtl_ops; + + u32 coalesce; + u16 ocp_base; + + u8 version; +}; + +int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, + u16 size, void *data, u16 type); +int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, + void *data, u16 type); + +int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data); +int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, + u16 size, void *data); + +int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data); +int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, + u16 size, void *data); + +u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index); +void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data); + +u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index); +void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data); + +u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index); +void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data); + +u16 ocp_reg_read(struct r8152 *tp, u16 addr); +void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data); + +void sram_write(struct r8152 *tp, u16 addr, u16 data); + +int r8152_wait_for_bit(struct r8152 *tp, bool ocp_reg, u16 type, u16 index, + const u32 mask, bool set, unsigned int timeout); + +void r8152b_firmware(struct r8152 *tp); +void r8153_firmware(struct r8152 *tp); +#endif |