summaryrefslogtreecommitdiff
path: root/drivers/tsi108_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tsi108_i2c.c')
-rw-r--r--drivers/tsi108_i2c.c37
1 files changed, 11 insertions, 26 deletions
diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c
index c100cb8..eb52cb6 100644
--- a/drivers/tsi108_i2c.c
+++ b/drivers/tsi108_i2c.c
@@ -82,15 +82,10 @@ static int i2c_read_byte (
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp =
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset +
- I2C_CNTRL2);
-
- if (0 ==
- (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START)))
- {
- if (0 ==
- (temp &
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
+ if (0 == (temp &
(I2C_CNTRL2_I2C_CFGERR |
I2C_CNTRL2_I2C_TO_ERR))
) {
@@ -152,9 +147,7 @@ int i2c_read (uchar chip_addr, uint byte_addr, int alen,
/* Check for valid I2C address */
if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
while (len--) {
- op_status =
- i2c_read_byte(i2c_if, chip_addr, byte_addr++,
- buffer++);
+ op_status = i2c_read_byte(i2c_if, chip_addr, byte_addr++, buffer++);
if (TSI108_I2C_SUCCESS != op_status) {
DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len));
@@ -182,10 +175,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
/* Check if I2C operation is in progress */
temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
- if (0 ==
- (temp &
- (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START)))
- {
+ if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
/* Place data into the I2C Tx Register */
*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_TX_DATA) = (u32) * buffer;
@@ -200,7 +190,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
/* Issue the write command (at this moment all other parameters
* are 0 (size = 1 byte, lane = 0)
*/
-
+
*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL2) = (I2C_CNTRL2_START);
@@ -209,15 +199,10 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp =
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
- I2C_CNTRL2);
-
- if (0 ==
- (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START)))
- {
- if (0 ==
- (temp &
+ temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+ if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+ if (0 == (temp &
(I2C_CNTRL2_I2C_CFGERR |
I2C_CNTRL2_I2C_TO_ERR))) {
op_status = TSI108_I2C_SUCCESS;