diff options
Diffstat (limited to 'drivers/tigon3.c')
| -rw-r--r-- | drivers/tigon3.c | 6372 |
1 files changed, 3175 insertions, 3197 deletions
diff --git a/drivers/tigon3.c b/drivers/tigon3.c index c20dbe5..ec2cd2a 100644 --- a/drivers/tigon3.c +++ b/drivers/tigon3.c @@ -53,7 +53,7 @@ STATIC LM_STATUS LM_InitBcm800xPhy(PLM_DEVICE_BLOCK pDevice); STATIC LM_STATUS LM_SetupCopperPhy(PLM_DEVICE_BLOCK pDevice); STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid(LM_UINT16 Svid, LM_UINT16 Ssid); STATIC LM_STATUS LM_DmaTest(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt, - LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize); + LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize); STATIC LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number); STATIC LM_STATUS LM_ResetChip(PLM_DEVICE_BLOCK pDevice); STATIC LM_STATUS LM_Test4GBoundary(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket, @@ -90,7 +90,6 @@ LM_UINT32 Register) { } /* LM_RegRdInd */ - /******************************************************************************/ /* Description: */ /* */ @@ -113,7 +112,6 @@ LM_UINT32 Value32) { } /* LM_RegWrInd */ - /******************************************************************************/ /* Description: */ /* */ @@ -140,7 +138,6 @@ LM_UINT32 MemAddr) { } /* LM_MemRdInd */ - /******************************************************************************/ /* Description: */ /* */ @@ -163,7 +160,6 @@ LM_UINT32 Value32) { } /* LM_MemWrInd */ - /******************************************************************************/ /* Description: */ /* */ @@ -184,84 +180,84 @@ PLM_DEVICE_BLOCK pDevice) { pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container); while(pPacket) { - switch(pPacket->u.Rx.RcvProdRing) { + switch(pPacket->u.Rx.RcvProdRing) { #if T3_JUMBO_RCV_RCB_ENTRY_COUNT - case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */ - /* Initialize the buffer descriptor. */ - pRcvBd = - &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx]; - pRcvBd->Flags = RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING; - pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize; - - /* Initialize the receive buffer pointer */ + case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */ + /* Initialize the buffer descriptor. */ + pRcvBd = + &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx]; + pRcvBd->Flags = RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING; + pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize; + + /* Initialize the receive buffer pointer */ #if 0 /* Jimmy, deleted in new */ - pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low; - pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High; + pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low; + pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High; #endif - MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr); + MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr); - /* The opaque field may point to an offset from a fix addr. */ - pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) - - MM_UINT_PTR(pDevice->pPacketDescBase)); + /* The opaque field may point to an offset from a fix addr. */ + pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) - + MM_UINT_PTR(pDevice->pPacketDescBase)); - /* Update the producer index. */ - pDevice->RxJumboProdIdx = (pDevice->RxJumboProdIdx + 1) & - T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK; + /* Update the producer index. */ + pDevice->RxJumboProdIdx = (pDevice->RxJumboProdIdx + 1) & + T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK; - JumboBdAdded++; - break; + JumboBdAdded++; + break; #endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */ - /* Initialize the buffer descriptor. */ - pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx]; - pRcvBd->Flags = RCV_BD_FLAG_END; - pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE; + case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */ + /* Initialize the buffer descriptor. */ + pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx]; + pRcvBd->Flags = RCV_BD_FLAG_END; + pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE; - /* Initialize the receive buffer pointer */ + /* Initialize the receive buffer pointer */ #if 0 /* Jimmy, deleted in new replaced with MM_MapRxDma */ - pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low; - pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High; + pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low; + pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High; #endif - MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr); + MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr); - /* The opaque field may point to an offset from a fix addr. */ - pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) - - MM_UINT_PTR(pDevice->pPacketDescBase)); + /* The opaque field may point to an offset from a fix addr. */ + pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) - + MM_UINT_PTR(pDevice->pPacketDescBase)); - /* Update the producer index. */ - pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) & - T3_STD_RCV_RCB_ENTRY_COUNT_MASK; + /* Update the producer index. */ + pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) & + T3_STD_RCV_RCB_ENTRY_COUNT_MASK; - StdBdAdded++; - break; + StdBdAdded++; + break; - case T3_UNKNOWN_RCV_PROD_RING: - default: - Lmstatus = LM_STATUS_FAILURE; - break; - } /* switch */ + case T3_UNKNOWN_RCV_PROD_RING: + default: + Lmstatus = LM_STATUS_FAILURE; + break; + } /* switch */ - /* Bail out if there is any error. */ - if(Lmstatus != LM_STATUS_SUCCESS) - { - break; - } + /* Bail out if there is any error. */ + if(Lmstatus != LM_STATUS_SUCCESS) + { + break; + } - pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container); + pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container); } /* while */ wmb(); /* Update the procedure index. */ if(StdBdAdded) { - MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, pDevice->RxStdProdIdx); + MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, pDevice->RxStdProdIdx); } #if T3_JUMBO_RCV_RCB_ENTRY_COUNT if(JumboBdAdded) { - MB_REG_WR(pDevice, Mailbox.RcvJumboProdIdx.Low, - pDevice->RxJumboProdIdx); + MB_REG_WR(pDevice, Mailbox.RcvJumboProdIdx.Low, + pDevice->RxJumboProdIdx); } #endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ @@ -283,12 +279,12 @@ LM_NvramInit( /* Intialize clock period and state machine. */ Value32 = SEEPROM_ADDR_CLK_PERD(SEEPROM_CLOCK_PERIOD) | - SEEPROM_ADDR_FSM_RESET; + SEEPROM_ADDR_FSM_RESET; REG_WR(pDevice, Grc.EepromAddr, Value32); for(j = 0; j < 100; j++) { - MM_Wait(10); + MM_Wait(10); } /* Serial eeprom access using the Grc.EepromAddr/EepromData registers. */ @@ -297,16 +293,16 @@ LM_NvramInit( /* Set the 5701 compatibility mode if we are using EEPROM. */ if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 && - T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) + T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) { - Value32 = REG_RD(pDevice, Nvram.Config1); - if((Value32 & FLASH_INTERFACE_ENABLE) == 0) - { - /* Use the new interface to read EEPROM. */ - Value32 &= ~FLASH_COMPAT_BYPASS; + Value32 = REG_RD(pDevice, Nvram.Config1); + if((Value32 & FLASH_INTERFACE_ENABLE) == 0) + { + /* Use the new interface to read EEPROM. */ + Value32 &= ~FLASH_COMPAT_BYPASS; - REG_WR(pDevice, Nvram.Config1, Value32); - } + REG_WR(pDevice, Nvram.Config1, Value32); + } } } /* LM_NvRamInit */ @@ -329,7 +325,7 @@ LM_EepromRead( if(Offset > SEEPROM_CHIP_SIZE) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } Dev = Offset / SEEPROM_CHIP_SIZE; @@ -337,33 +333,32 @@ LM_EepromRead( Value32 = REG_RD(pDevice, Grc.EepromAddr); Value32 &= ~(SEEPROM_ADDR_ADDRESS_MASK | SEEPROM_ADDR_DEV_ID_MASK | - SEEPROM_ADDR_RW_MASK); + SEEPROM_ADDR_RW_MASK); REG_WR(pDevice, Grc.EepromAddr, Value32 | SEEPROM_ADDR_DEV_ID(Dev) | - SEEPROM_ADDR_ADDRESS(Addr) | SEEPROM_ADDR_START | SEEPROM_ADDR_READ); + SEEPROM_ADDR_ADDRESS(Addr) | SEEPROM_ADDR_START | SEEPROM_ADDR_READ); for(j = 0; j < 1000; j++) { - Value32 = REG_RD(pDevice, Grc.EepromAddr); - if(Value32 & SEEPROM_ADDR_COMPLETE) - { - break; - } - MM_Wait(10); + Value32 = REG_RD(pDevice, Grc.EepromAddr); + if(Value32 & SEEPROM_ADDR_COMPLETE) + { + break; + } + MM_Wait(10); } if(Value32 & SEEPROM_ADDR_COMPLETE) { - Value32 = REG_RD(pDevice, Grc.EepromData); - *pData = Value32; + Value32 = REG_RD(pDevice, Grc.EepromData); + *pData = Value32; - return LM_STATUS_SUCCESS; + return LM_STATUS_SUCCESS; } return LM_STATUS_FAILURE; } /* LM_EepromRead */ - /******************************************************************************/ /* Description: */ /* */ @@ -380,88 +375,88 @@ LM_NvramRead( LM_UINT32 j; if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Status = LM_EepromRead(pDevice, Offset, pData); + Status = LM_EepromRead(pDevice, Offset, pData); } else { - /* Determine if we have flash or EEPROM. */ - Value32 = REG_RD(pDevice, Nvram.Config1); - if(Value32 & FLASH_INTERFACE_ENABLE) - { - if(Value32 & FLASH_SSRAM_BUFFERRED_MODE) - { - Offset = ((Offset/BUFFERED_FLASH_PAGE_SIZE) << - BUFFERED_FLASH_PAGE_POS) + - (Offset % BUFFERED_FLASH_PAGE_SIZE); - } - } - - REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1); - for (j = 0; j < 1000; j++) - { - if (REG_RD(pDevice, Nvram.SwArb) & SW_ARB_GNT1) - { - break; - } - MM_Wait(20); - } - if (j == 1000) - { - return LM_STATUS_FAILURE; - } - - /* Read from flash or EEPROM with the new 5703/02 interface. */ - REG_WR(pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK); - - REG_WR(pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT | - NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE); - - /* Wait for the done bit to clear. */ - for(j = 0; j < 500; j++) - { - MM_Wait(10); - - Value32 = REG_RD(pDevice, Nvram.Cmd); - if(!(Value32 & NVRAM_CMD_DONE)) - { - break; - } - } - - /* Wait for the done bit. */ - if(!(Value32 & NVRAM_CMD_DONE)) - { - for(j = 0; j < 500; j++) - { - MM_Wait(10); - - Value32 = REG_RD(pDevice, Nvram.Cmd); - if(Value32 & NVRAM_CMD_DONE) - { - MM_Wait(10); - - *pData = REG_RD(pDevice, Nvram.ReadData); - - /* Change the endianess. */ - *pData = ((*pData & 0xff) << 24)| ((*pData & 0xff00) << 8)| - ((*pData & 0xff0000) >> 8) | ((*pData >> 24) & 0xff); - - break; - } - } - } - - REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1); - if(Value32 & NVRAM_CMD_DONE) - { - Status = LM_STATUS_SUCCESS; - } - else - { - Status = LM_STATUS_FAILURE; - } + /* Determine if we have flash or EEPROM. */ + Value32 = REG_RD(pDevice, Nvram.Config1); + if(Value32 & FLASH_INTERFACE_ENABLE) + { + if(Value32 & FLASH_SSRAM_BUFFERRED_MODE) + { + Offset = ((Offset/BUFFERED_FLASH_PAGE_SIZE) << + BUFFERED_FLASH_PAGE_POS) + + (Offset % BUFFERED_FLASH_PAGE_SIZE); + } + } + + REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1); + for (j = 0; j < 1000; j++) + { + if (REG_RD(pDevice, Nvram.SwArb) & SW_ARB_GNT1) + { + break; + } + MM_Wait(20); + } + if (j == 1000) + { + return LM_STATUS_FAILURE; + } + + /* Read from flash or EEPROM with the new 5703/02 interface. */ + REG_WR(pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK); + + REG_WR(pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT | + NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE); + + /* Wait for the done bit to clear. */ + for(j = 0; j < 500; j++) + { + MM_Wait(10); + + Value32 = REG_RD(pDevice, Nvram.Cmd); + if(!(Value32 & NVRAM_CMD_DONE)) + { + break; + } + } + + /* Wait for the done bit. */ + if(!(Value32 & NVRAM_CMD_DONE)) + { + for(j = 0; j < 500; j++) + { + MM_Wait(10); + + Value32 = REG_RD(pDevice, Nvram.Cmd); + if(Value32 & NVRAM_CMD_DONE) + { + MM_Wait(10); + + *pData = REG_RD(pDevice, Nvram.ReadData); + + /* Change the endianess. */ + *pData = ((*pData & 0xff) << 24)| ((*pData & 0xff00) << 8)| + ((*pData & 0xff0000) >> 8) | ((*pData >> 24) & 0xff); + + break; + } + } + } + + REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1); + if(Value32 & NVRAM_CMD_DONE) + { + Status = LM_STATUS_SUCCESS; + } + else + { + Status = LM_STATUS_FAILURE; + } } return Status; @@ -480,53 +475,53 @@ LM_ReadVPD(PLM_DEVICE_BLOCK pDevice) /* Read PN from VPD */ for (j = 0; j < 256; j += 4, Vpd_dptr++ ) { - if (LM_NvramRead(pDevice, 0x100 + j, &Value32) != LM_STATUS_SUCCESS) { - printf("BCM570x: LM_ReadVPD: VPD read failed" + if (LM_NvramRead(pDevice, 0x100 + j, &Value32) != LM_STATUS_SUCCESS) { + printf("BCM570x: LM_ReadVPD: VPD read failed" " (no EEPROM onboard)\n"); - return; - } - *Vpd_dptr = cpu_to_le32(Value32); + return; + } + *Vpd_dptr = cpu_to_le32(Value32); } for (j = 0; j < 256; ) { - unsigned int Vpd_r_len; - unsigned int Vpd_r_end; - - if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91)) - { - j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8); - } - else if (Vpd[j] == 0x90) - { - Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8); - j += 3; - Vpd_r_end = Vpd_r_len + j; - while (j < Vpd_r_end) - { - if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N')) - { - unsigned int len = Vpd[j + 2]; - - if (len <= 24) - { - memcpy(pDevice->PartNo, &Vpd[j + 3], len); - } - break; - } - else - { - if (Vpd[j + 2] == 0) - { - break; - } - j = j + Vpd[j + 2]; - } - } - break; - } - else { - break; - } + unsigned int Vpd_r_len; + unsigned int Vpd_r_end; + + if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91)) + { + j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8); + } + else if (Vpd[j] == 0x90) + { + Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8); + j += 3; + Vpd_r_end = Vpd_r_len + j; + while (j < Vpd_r_end) + { + if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N')) + { + unsigned int len = Vpd[j + 2]; + + if (len <= 24) + { + memcpy(pDevice->PartNo, &Vpd[j + 3], len); + } + break; + } + else + { + if (Vpd[j + 2] == 0) + { + break; + } + j = j + Vpd[j + 2]; + } + } + break; + } + else { + break; + } } } @@ -537,59 +532,59 @@ LM_ReadBootCodeVersion(PLM_DEVICE_BLOCK pDevice) int i; if (LM_NvramRead(pDevice, 0x0, &Value32) != LM_STATUS_SUCCESS) - return; + return; if (Value32 != 0xaa559966) - return; + return; if (LM_NvramRead(pDevice, 0xc, &offset) != LM_STATUS_SUCCESS) - return; + return; offset = ((offset & 0xff) << 24)| ((offset & 0xff00) << 8)| - ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff); + ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff); if (LM_NvramRead(pDevice, offset, &Value32) != LM_STATUS_SUCCESS) - return; + return; if ((Value32 == 0x0300000e) && - (LM_NvramRead(pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS) && - (Value32 == 0)) { - - if (LM_NvramRead(pDevice, offset + 8, &ver_offset) != LM_STATUS_SUCCESS) - return; - ver_offset = ((ver_offset & 0xff0000) >> 8) | - ((ver_offset >> 24) & 0xff); - for (i = 0; i < 16; i += 4) { - if (LM_NvramRead(pDevice, offset + ver_offset + i, &Value32) != - LM_STATUS_SUCCESS) - { - return; - } - *((LM_UINT32 *) &pDevice->BootCodeVer[i]) = cpu_to_le32(Value32); - } + (LM_NvramRead(pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS) && + (Value32 == 0)) { + + if (LM_NvramRead(pDevice, offset + 8, &ver_offset) != LM_STATUS_SUCCESS) + return; + ver_offset = ((ver_offset & 0xff0000) >> 8) | + ((ver_offset >> 24) & 0xff); + for (i = 0; i < 16; i += 4) { + if (LM_NvramRead(pDevice, offset + ver_offset + i, &Value32) != + LM_STATUS_SUCCESS) + { + return; + } + *((LM_UINT32 *) &pDevice->BootCodeVer[i]) = cpu_to_le32(Value32); + } } else { - char c; - - if (LM_NvramRead(pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS) - return; - - i = 0; - c = ((Value32 & 0xff0000) >> 16); - - if (c < 10) { - pDevice->BootCodeVer[i++] = c + '0'; - } - else { - pDevice->BootCodeVer[i++] = (c / 10) + '0'; - pDevice->BootCodeVer[i++] = (c % 10) + '0'; - } - pDevice->BootCodeVer[i++] = '.'; - c = (Value32 & 0xff000000) >> 24; - if (c < 10) { - pDevice->BootCodeVer[i++] = c + '0'; - } - else { - pDevice->BootCodeVer[i++] = (c / 10) + '0'; - pDevice->BootCodeVer[i++] = (c % 10) + '0'; - } - pDevice->BootCodeVer[i] = 0; + char c; + + if (LM_NvramRead(pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS) + return; + + i = 0; + c = ((Value32 & 0xff0000) >> 16); + + if (c < 10) { + pDevice->BootCodeVer[i++] = c + '0'; + } + else { + pDevice->BootCodeVer[i++] = (c / 10) + '0'; + pDevice->BootCodeVer[i++] = (c % 10) + '0'; + } + pDevice->BootCodeVer[i++] = '.'; + c = (Value32 & 0xff000000) >> 24; + if (c < 10) { + pDevice->BootCodeVer[i++] = c + '0'; + } + else { + pDevice->BootCodeVer[i++] = (c / 10) + '0'; + pDevice->BootCodeVer[i++] = (c % 10) + '0'; + } + pDevice->BootCodeVer[i] = 0; } } @@ -602,57 +597,57 @@ LM_GetBusSpeed(PLM_DEVICE_BLOCK pDevice) if (PciState & T3_PCI_STATE_32BIT_PCI_BUS) { - strcpy(pDevice->BusSpeedStr, "32-bit "); + strcpy(pDevice->BusSpeedStr, "32-bit "); } else { - strcpy(pDevice->BusSpeedStr, "64-bit "); + strcpy(pDevice->BusSpeedStr, "64-bit "); } if (PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) { - strcat(pDevice->BusSpeedStr, "PCI "); - if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED) - { - SpeedStr = "66MHz"; - } - else - { - SpeedStr = "33MHz"; - } + strcat(pDevice->BusSpeedStr, "PCI "); + if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED) + { + SpeedStr = "66MHz"; + } + else + { + SpeedStr = "33MHz"; + } } else { - strcat(pDevice->BusSpeedStr, "PCIX "); - if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE) - { - SpeedStr = "133MHz"; - } - else - { - ClockCtrl = REG_RD(pDevice, PciCfg.ClockCtrl) & 0x1f; - switch (ClockCtrl) - { - case 0: - SpeedStr = "33MHz"; - break; - - case 2: - SpeedStr = "50MHz"; - break; - - case 4: - SpeedStr = "66MHz"; - break; - - case 6: - SpeedStr = "100MHz"; - break; - - case 7: - SpeedStr = "133MHz"; - break; - } - } + strcat(pDevice->BusSpeedStr, "PCIX "); + if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE) + { + SpeedStr = "133MHz"; + } + else + { + ClockCtrl = REG_RD(pDevice, PciCfg.ClockCtrl) & 0x1f; + switch (ClockCtrl) + { + case 0: + SpeedStr = "33MHz"; + break; + + case 2: + SpeedStr = "50MHz"; + break; + + case 4: + SpeedStr = "66MHz"; + break; + + case 6: + SpeedStr = "100MHz"; + break; + + case 7: + SpeedStr = "133MHz"; + break; + } + } } strcat(pDevice->BusSpeedStr, SpeedStr); } @@ -682,7 +677,7 @@ PLM_DEVICE_BLOCK pDevice) Status = MM_ReadConfig32(pDevice, PCI_VENDOR_ID_REG, &Value32); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } pDevice->PciVendorId = (LM_UINT16) Value32; pDevice->PciDeviceId = (LM_UINT16) (Value32 >> 16); @@ -697,13 +692,13 @@ PLM_DEVICE_BLOCK pDevice) (Value32 != T3_PCI_ID_BCM5703x) && (Value32 != T3_PCI_ID_BCM5704)) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } Status = MM_ReadConfig32(pDevice, PCI_REV_ID_REG, &Value32); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } pDevice->PciRevId = (LM_UINT8) Value32; @@ -711,7 +706,7 @@ PLM_DEVICE_BLOCK pDevice) Status = MM_ReadConfig32(pDevice, PCI_INT_LINE_REG, &Value32); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } pDevice->Irq = (LM_UINT8) Value32; @@ -726,7 +721,7 @@ PLM_DEVICE_BLOCK pDevice) Status = MM_ReadConfig32(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, &Value32); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } pDevice->SubsystemVendorId = (LM_UINT16) Value32; @@ -739,10 +734,10 @@ PLM_DEVICE_BLOCK pDevice) pDevice->SavedCacheLineReg = Value32; if(pDevice->ChipRevId != T3_CHIP_ID_5703_A1 && - pDevice->ChipRevId != T3_CHIP_ID_5703_A2 && - pDevice->ChipRevId != T3_CHIP_ID_5704_A0) + pDevice->ChipRevId != T3_CHIP_ID_5703_A2 && + pDevice->ChipRevId != T3_CHIP_ID_5704_A0) { - pDevice->UndiFix = FALSE; + pDevice->UndiFix = FALSE; } #if !PCIX_TARGET_WORKAROUND pDevice->UndiFix = FALSE; @@ -750,13 +745,13 @@ PLM_DEVICE_BLOCK pDevice) /* Map the memory base to system address space. */ if (!pDevice->UndiFix) { - Status = MM_MapMemBase(pDevice); - if(Status != LM_STATUS_SUCCESS) - { - return Status; - } - /* Initialize the memory view pointer. */ - pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase; + Status = MM_MapMemBase(pDevice); + if(Status != LM_STATUS_SUCCESS) + { + return Status; + } + /* Initialize the memory view pointer. */ + pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase; } #if PCIX_TARGET_WORKAROUND @@ -766,15 +761,15 @@ PLM_DEVICE_BLOCK pDevice) MM_ReadConfig32(pDevice, T3_PCI_STATE_REG, &Value32); if((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0) { - /* Enable PCI-X workaround only if we are running on 5700 BX. */ - if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) - { - pDevice->EnablePciXFix = TRUE; - } + /* Enable PCI-X workaround only if we are running on 5700 BX. */ + if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) + { + pDevice->EnablePciXFix = TRUE; + } } if (pDevice->UndiFix) { - pDevice->EnablePciXFix = TRUE; + pDevice->EnablePciXFix = TRUE; } #endif /* Bx bug: due to the "byte_enable bug" in PCI-X mode, the power */ @@ -796,30 +791,30 @@ PLM_DEVICE_BLOCK pDevice) #if PCIX_TARGET_WORKAROUND /* if we are in PCI-X mode, also make sure mem-mapping and SERR#/PERR# - are enabled */ + are enabled */ if (pDevice->EnablePciXFix == TRUE) { - Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE | - PCI_PARITY_ERROR_ENABLE); + Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE | + PCI_PARITY_ERROR_ENABLE); } if (pDevice->UndiFix) { - Value32 &= ~PCI_MEM_SPACE_ENABLE; + Value32 &= ~PCI_MEM_SPACE_ENABLE; } #endif if(pDevice->EnableMWI) { - Value32 |= PCI_MEMORY_WRITE_INVALIDATE; + Value32 |= PCI_MEMORY_WRITE_INVALIDATE; } else { - Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE); + Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE); } /* Error out if mem-mapping is NOT enabled for PCI systems */ if (!(Value32 | PCI_MEM_SPACE_ENABLE)) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } /* save the value we are going to write into the PCI command word */ @@ -828,7 +823,7 @@ PLM_DEVICE_BLOCK pDevice) Status = MM_WriteConfig32(pDevice, PCI_COMMAND_REG, Value32); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } /* Set power state to D0. */ @@ -836,21 +831,21 @@ PLM_DEVICE_BLOCK pDevice) #ifdef BIG_ENDIAN_PCI pDevice->MiscHostCtrl = - MISC_HOST_CTRL_MASK_PCI_INT | - MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS | - MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP | - MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW; + MISC_HOST_CTRL_MASK_PCI_INT | + MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS | + MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP | + MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW; #else /* No CPU Swap modes for PCI IO */ /* Setup the mode registers. */ pDevice->MiscHostCtrl = - MISC_HOST_CTRL_MASK_PCI_INT | - MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP | + MISC_HOST_CTRL_MASK_PCI_INT | + MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP | #ifdef BIG_ENDIAN_HOST - MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP | + MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP | #endif /* BIG_ENDIAN_HOST */ - MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS | - MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW; + MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS | + MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW; #endif /* !BIG_ENDIAN_PCI */ /* write to PCI misc host ctr first in order to enable indirect accesses */ @@ -865,7 +860,7 @@ PLM_DEVICE_BLOCK pDevice) /* No CPU Swap modes for PCI IO */ #ifdef BIG_ENDIAN_HOST Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA; + GRC_MODE_WORD_SWAP_NON_FRAME_DATA; #else Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA; #endif @@ -875,8 +870,8 @@ PLM_DEVICE_BLOCK pDevice) if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) { - REG_WR(pDevice, Grc.LocalCtrl, GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1); + REG_WR(pDevice, Grc.LocalCtrl, GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | + GRC_MISC_LOCAL_CTRL_GPIO_OE1); } MM_Wait(40); @@ -885,10 +880,10 @@ PLM_DEVICE_BLOCK pDevice) if (REG_RD(pDevice, PciCfg.ClockCtrl) & T3_PCI_44MHZ_CORE_CLOCK) { - REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK); - REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_SELECT_ALTERNATE_CLOCK); - MM_Wait(40); /* required delay is 27usec */ + REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK | + T3_PCI_SELECT_ALTERNATE_CLOCK); + REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_SELECT_ALTERNATE_CLOCK); + MM_Wait(40); /* required delay is 27usec */ } REG_WR(pDevice, PciCfg.ClockCtrl, 0); REG_WR(pDevice, PciCfg.MemWindowBaseAddr, 0); @@ -896,21 +891,21 @@ PLM_DEVICE_BLOCK pDevice) #if PCIX_TARGET_WORKAROUND MM_ReadConfig32(pDevice, T3_PCI_STATE_REG, &Value32); if ((pDevice->EnablePciXFix == FALSE) && - ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)) - { - if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B2 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B5) - { - __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x300])); - __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301])); - __raw_writel(0xffffffff, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301])); - if (__raw_readl(&(pDevice->pMemView->uIntMem.MemBlock32K[0x300]))) - { - pDevice->EnablePciXFix = TRUE; - } - } + ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)) + { + if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B0 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B2 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B5) + { + __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x300])); + __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301])); + __raw_writel(0xffffffff, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301])); + if (__raw_readl(&(pDevice->pMemView->uIntMem.MemBlock32K[0x300]))) + { + pDevice->EnablePciXFix = TRUE; + } + } } #endif #if 1 @@ -927,44 +922,44 @@ PLM_DEVICE_BLOCK pDevice) if((Value32 >> 16) == 0x484b) { - pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8); - pDevice->NodeAddress[1] = (LM_UINT8) Value32; + pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8); + pDevice->NodeAddress[1] = (LM_UINT8) Value32; - Value32 = MEM_RD_OFFSET(pDevice, T3_MAC_ADDR_LOW_MAILBOX); + Value32 = MEM_RD_OFFSET(pDevice, T3_MAC_ADDR_LOW_MAILBOX); - pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24); - pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16); - pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8); - pDevice->NodeAddress[5] = (LM_UINT8) Value32; + pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24); + pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16); + pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8); + pDevice->NodeAddress[5] = (LM_UINT8) Value32; - Status = LM_STATUS_SUCCESS; + Status = LM_STATUS_SUCCESS; } else { - Status = LM_NvramRead(pDevice, 0x7c, &Value32); - if(Status == LM_STATUS_SUCCESS) - { - pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16); - pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24); + Status = LM_NvramRead(pDevice, 0x7c, &Value32); + if(Status == LM_STATUS_SUCCESS) + { + pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16); + pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24); - Status = LM_NvramRead(pDevice, 0x80, &Value32); + Status = LM_NvramRead(pDevice, 0x80, &Value32); - pDevice->NodeAddress[2] = (LM_UINT8) Value32; - pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8); - pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16); - pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24); - } + pDevice->NodeAddress[2] = (LM_UINT8) Value32; + pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8); + pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16); + pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24); + } } /* Assign a default address. */ if(Status != LM_STATUS_SUCCESS) { #ifndef EMBEDDED - printk(KERN_ERR "Cannot get MAC addr from NVRAM. Using default.\n"); + printk(KERN_ERR "Cannot get MAC addr from NVRAM. Using default.\n"); #endif - pDevice->NodeAddress[0] = 0x00; pDevice->NodeAddress[1] = 0x10; - pDevice->NodeAddress[2] = 0x18; pDevice->NodeAddress[3] = 0x68; - pDevice->NodeAddress[4] = 0x61; pDevice->NodeAddress[5] = 0x76; + pDevice->NodeAddress[0] = 0x00; pDevice->NodeAddress[1] = 0x10; + pDevice->NodeAddress[2] = 0x18; pDevice->NodeAddress[3] = 0x68; + pDevice->NodeAddress[4] = 0x61; pDevice->NodeAddress[5] = 0x76; } pDevice->PermanentNodeAddress[0] = pDevice->NodeAddress[0]; @@ -1016,13 +1011,13 @@ PLM_DEVICE_BLOCK pDevice) switch (T3_ASIC_REV(pDevice->ChipRevId)) { case T3_ASIC_REV_5704: - pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR; - pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64; - break; + pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR; + pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64; + break; default: - pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR; - pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96; - break; + pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR; + pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96; + break; } pDevice->LinkStatus = LM_STATUS_LINK_DOWN; @@ -1036,117 +1031,117 @@ PLM_DEVICE_BLOCK pDevice) /* Make this is a known adapter. */ pAdapterInfo = LM_GetAdapterInfoBySsid(pDevice->SubsystemVendorId, - pDevice->SubsystemId); + pDevice->SubsystemId); pDevice->BondId = REG_RD(pDevice, Grc.MiscCfg) & GRC_MISC_BD_ID_MASK; if (pDevice->BondId != GRC_MISC_BD_ID_5700 && - pDevice->BondId != GRC_MISC_BD_ID_5701 && - pDevice->BondId != GRC_MISC_BD_ID_5702FE && - pDevice->BondId != GRC_MISC_BD_ID_5703 && - pDevice->BondId != GRC_MISC_BD_ID_5703S && - pDevice->BondId != GRC_MISC_BD_ID_5704 && - pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE) + pDevice->BondId != GRC_MISC_BD_ID_5701 && + pDevice->BondId != GRC_MISC_BD_ID_5702FE && + pDevice->BondId != GRC_MISC_BD_ID_5703 && + pDevice->BondId != GRC_MISC_BD_ID_5703S && + pDevice->BondId != GRC_MISC_BD_ID_5704 && + pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE) { - return LM_STATUS_UNKNOWN_ADAPTER; + return LM_STATUS_UNKNOWN_ADAPTER; } pDevice->SplitModeEnable = SPLIT_MODE_DISABLE; if ((pDevice->ChipRevId == T3_CHIP_ID_5704_A0) && - (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)) + (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)) { - pDevice->SplitModeEnable = SPLIT_MODE_ENABLE; - pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ; + pDevice->SplitModeEnable = SPLIT_MODE_ENABLE; + pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ; } /* Get Eeprom info. */ Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_SIG_ADDR); if (Value32 == T3_NIC_DATA_SIG) { - EeSigFound = TRUE; - Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR); - - /* Determine PHY type. */ - switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK) - { - case T3_NIC_CFG_PHY_TYPE_COPPER: - EePhyTypeSerdes = FALSE; - break; - - case T3_NIC_CFG_PHY_TYPE_FIBER: - EePhyTypeSerdes = TRUE; - break; - - default: - EePhyTypeSerdes = FALSE; - break; - } - - /* Determine PHY led mode. */ - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - switch(Value32 & T3_NIC_CFG_LED_MODE_MASK) - { - case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED: - EePhyLedMode = LED_MODE_THREE_LINK; - break; - - case T3_NIC_CFG_LED_MODE_LINK_SPEED: - EePhyLedMode = LED_MODE_LINK10; - break; - - default: - EePhyLedMode = LED_MODE_AUTO; - break; - } - } - else - { - switch(Value32 & T3_NIC_CFG_LED_MODE_MASK) - { - case T3_NIC_CFG_LED_MODE_OPEN_DRAIN: - EePhyLedMode = LED_MODE_OPEN_DRAIN; - break; - - case T3_NIC_CFG_LED_MODE_OUTPUT: - EePhyLedMode = LED_MODE_OUTPUT; - break; - - default: - EePhyLedMode = LED_MODE_AUTO; - break; - } - } - if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 || - pDevice->ChipRevId == T3_CHIP_ID_5703_A2) - { - /* Enable EEPROM write protection. */ - if(Value32 & T3_NIC_EEPROM_WP) - { - pDevice->EepromWp = TRUE; - } - } - - /* Get the PHY Id. */ - Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_PHY_ID_ADDR); - if (Value32) - { - EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) & - PHY_ID1_OUI_MASK) << 10; - - Value32 = Value32 & T3_NIC_PHY_ID2_MASK; - - EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) | - (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK); - } - else - { - EePhyId = 0; - } + EeSigFound = TRUE; + Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR); + + /* Determine PHY type. */ + switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK) + { + case T3_NIC_CFG_PHY_TYPE_COPPER: + EePhyTypeSerdes = FALSE; + break; + + case T3_NIC_CFG_PHY_TYPE_FIBER: + EePhyTypeSerdes = TRUE; + break; + + default: + EePhyTypeSerdes = FALSE; + break; + } + + /* Determine PHY led mode. */ + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + switch(Value32 & T3_NIC_CFG_LED_MODE_MASK) + { + case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED: + EePhyLedMode = LED_MODE_THREE_LINK; + break; + + case T3_NIC_CFG_LED_MODE_LINK_SPEED: + EePhyLedMode = LED_MODE_LINK10; + break; + + default: + EePhyLedMode = LED_MODE_AUTO; + break; + } + } + else + { + switch(Value32 & T3_NIC_CFG_LED_MODE_MASK) + { + case T3_NIC_CFG_LED_MODE_OPEN_DRAIN: + EePhyLedMode = LED_MODE_OPEN_DRAIN; + break; + + case T3_NIC_CFG_LED_MODE_OUTPUT: + EePhyLedMode = LED_MODE_OUTPUT; + break; + + default: + EePhyLedMode = LED_MODE_AUTO; + break; + } + } + if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 || + pDevice->ChipRevId == T3_CHIP_ID_5703_A2) + { + /* Enable EEPROM write protection. */ + if(Value32 & T3_NIC_EEPROM_WP) + { + pDevice->EepromWp = TRUE; + } + } + + /* Get the PHY Id. */ + Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_PHY_ID_ADDR); + if (Value32) + { + EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) & + PHY_ID1_OUI_MASK) << 10; + + Value32 = Value32 & T3_NIC_PHY_ID2_MASK; + + EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) | + (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK); + } + else + { + EePhyId = 0; + } } else { - EeSigFound = FALSE; + EeSigFound = FALSE; } /* Set the PHY address. */ @@ -1168,163 +1163,163 @@ PLM_DEVICE_BLOCK pDevice) /* Set the EnableTbi flag to false if we have a copper PHY. */ switch(pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM5400_PHY_ID: - pDevice->EnableTbi = FALSE; - break; + case PHY_BCM5400_PHY_ID: + pDevice->EnableTbi = FALSE; + break; - case PHY_BCM5401_PHY_ID: - pDevice->EnableTbi = FALSE; - break; + case PHY_BCM5401_PHY_ID: + pDevice->EnableTbi = FALSE; + break; - case PHY_BCM5411_PHY_ID: - pDevice->EnableTbi = FALSE; - break; + case PHY_BCM5411_PHY_ID: + pDevice->EnableTbi = FALSE; + break; - case PHY_BCM5701_PHY_ID: - pDevice->EnableTbi = FALSE; - break; + case PHY_BCM5701_PHY_ID: + pDevice->EnableTbi = FALSE; + break; - case PHY_BCM5703_PHY_ID: - pDevice->EnableTbi = FALSE; - break; + case PHY_BCM5703_PHY_ID: + pDevice->EnableTbi = FALSE; + break; - case PHY_BCM5704_PHY_ID: - pDevice->EnableTbi = FALSE; - break; + case PHY_BCM5704_PHY_ID: + pDevice->EnableTbi = FALSE; + break; - case PHY_BCM8002_PHY_ID: - pDevice->EnableTbi = TRUE; - break; + case PHY_BCM8002_PHY_ID: + pDevice->EnableTbi = TRUE; + break; - default: + default: - if (pAdapterInfo) - { - pDevice->PhyId = pAdapterInfo->PhyId; - pDevice->EnableTbi = pAdapterInfo->Serdes; - } - else if (EeSigFound) - { - pDevice->PhyId = EePhyId; - pDevice->EnableTbi = EePhyTypeSerdes; - } - break; + if (pAdapterInfo) + { + pDevice->PhyId = pAdapterInfo->PhyId; + pDevice->EnableTbi = pAdapterInfo->Serdes; + } + else if (EeSigFound) + { + pDevice->PhyId = EePhyId; + pDevice->EnableTbi = EePhyTypeSerdes; + } + break; } /* Bail out if we don't know the copper PHY id. */ if(UNKNOWN_PHY_ID(pDevice->PhyId) && !pDevice->EnableTbi) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) { - if((pDevice->SavedCacheLineReg & 0xff00) < 0x4000) - { - pDevice->SavedCacheLineReg &= 0xffff00ff; - pDevice->SavedCacheLineReg |= 0x4000; - } + if((pDevice->SavedCacheLineReg & 0xff00) < 0x4000) + { + pDevice->SavedCacheLineReg &= 0xffff00ff; + pDevice->SavedCacheLineReg |= 0x4000; + } } /* Change driver parameters. */ Status = MM_GetConfig(pDevice); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } #if INCLUDE_5701_AX_FIX if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) + pDevice->ChipRevId == T3_CHIP_ID_5701_B0) { - pDevice->ResetPhyOnInit = TRUE; + pDevice->ResetPhyOnInit = TRUE; } #endif /* Save the current phy link status. */ if(!pDevice->EnableTbi) { - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - /* If we don't have link reset the PHY. */ - if(!(Value32 & PHY_STATUS_LINK_PASS) || pDevice->ResetPhyOnInit) - { + /* If we don't have link reset the PHY. */ + if(!(Value32 & PHY_STATUS_LINK_PASS) || pDevice->ResetPhyOnInit) + { - LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET); + LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET); - for(j = 0; j < 100; j++) - { - MM_Wait(10); + for(j = 0; j < 100; j++) + { + MM_Wait(10); - LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); - if(Value32 && !(Value32 & PHY_CTRL_PHY_RESET)) - { - MM_Wait(40); - break; - } - } + LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); + if(Value32 && !(Value32 & PHY_CTRL_PHY_RESET)) + { + MM_Wait(40); + break; + } + } #if INCLUDE_5701_AX_FIX - /* 5701_AX_BX bug: only advertises 10mb speed. */ - if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) - { - - Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | - PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL | - PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; - Value32 |= GetPhyAdFlowCntrlSettings(pDevice); - LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - - Value32 = BCM540X_AN_AD_1000BASET_HALF | - BCM540X_AN_AD_1000BASET_FULL | BCM540X_CONFIG_AS_MASTER | - BCM540X_ENABLE_CONFIG_AS_MASTER; - LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32); - pDevice->advertising1000 = Value32; - - LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE | - PHY_CTRL_RESTART_AUTO_NEG); - } + /* 5701_AX_BX bug: only advertises 10mb speed. */ + if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B0) + { + + Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | + PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL | + PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; + Value32 |= GetPhyAdFlowCntrlSettings(pDevice); + LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); + pDevice->advertising = Value32; + + Value32 = BCM540X_AN_AD_1000BASET_HALF | + BCM540X_AN_AD_1000BASET_FULL | BCM540X_CONFIG_AS_MASTER | + BCM540X_ENABLE_CONFIG_AS_MASTER; + LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32); + pDevice->advertising1000 = Value32; + + LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE | + PHY_CTRL_RESTART_AUTO_NEG); + } #endif - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) - { - LM_WritePhy(pDevice, 0x18, 0x0c00); - LM_WritePhy(pDevice, 0x17, 0x201f); - LM_WritePhy(pDevice, 0x15, 0x2aaa); - } - if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0) - { - LM_WritePhy(pDevice, 0x1c, 0x8d68); - LM_WritePhy(pDevice, 0x1c, 0x8d68); - } - /* Enable Ethernet@WireSpeed. */ - if(pDevice->EnableWireSpeed) - { - LM_WritePhy(pDevice, 0x18, 0x7007); - LM_ReadPhy(pDevice, 0x18, &Value32); - LM_WritePhy(pDevice, 0x18, Value32 | BIT_15 | BIT_4); - } - } + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) + { + LM_WritePhy(pDevice, 0x18, 0x0c00); + LM_WritePhy(pDevice, 0x17, 0x201f); + LM_WritePhy(pDevice, 0x15, 0x2aaa); + } + if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0) + { + LM_WritePhy(pDevice, 0x1c, 0x8d68); + LM_WritePhy(pDevice, 0x1c, 0x8d68); + } + /* Enable Ethernet@WireSpeed. */ + if(pDevice->EnableWireSpeed) + { + LM_WritePhy(pDevice, 0x18, 0x7007); + LM_ReadPhy(pDevice, 0x18, &Value32); + LM_WritePhy(pDevice, 0x18, Value32 | BIT_15 | BIT_4); + } + } } /* Turn off tap power management. */ if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) { - LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20); + LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20); - MM_Wait(40); + MM_Wait(40); } #if INCLUDE_TBI_SUPPORT @@ -1332,110 +1327,110 @@ PLM_DEVICE_BLOCK pDevice) if(pDevice->EnableTbi) { - pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE; - pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY; - if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) || - pDevice->DisableAutoNeg) - { - pDevice->PollTbiLink = FALSE; - } + pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE; + pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY; + if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) || + pDevice->DisableAutoNeg) + { + pDevice->PollTbiLink = FALSE; + } } else { - pDevice->PollTbiLink = FALSE; + pDevice->PollTbiLink = FALSE; } #endif /* INCLUDE_TBI_SUPPORT */ /* UseTaggedStatus is only valid for 5701 and later. */ if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->UseTaggedStatus = FALSE; + pDevice->UseTaggedStatus = FALSE; - pDevice->CoalesceMode = 0; + pDevice->CoalesceMode = 0; } else { - pDevice->CoalesceMode = HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT | - HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT; + pDevice->CoalesceMode = HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT | + HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT; } /* Set the status block size. */ if(T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_AX && - T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_BX) + T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_BX) { - pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE; + pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE; } /* Check the DURING_INT coalescing ticks parameters. */ if(pDevice->UseTaggedStatus) { - if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->RxCoalescingTicksDuringInt = - DEFAULT_RX_COALESCING_TICKS_DURING_INT; - } - - if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->TxCoalescingTicksDuringInt = - DEFAULT_TX_COALESCING_TICKS_DURING_INT; - } - - if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->RxMaxCoalescedFramesDuringInt = - DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT; - } - - if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->TxMaxCoalescedFramesDuringInt = - DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT; - } + if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->RxCoalescingTicksDuringInt = + DEFAULT_RX_COALESCING_TICKS_DURING_INT; + } + + if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->TxCoalescingTicksDuringInt = + DEFAULT_TX_COALESCING_TICKS_DURING_INT; + } + + if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->RxMaxCoalescedFramesDuringInt = + DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT; + } + + if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->TxMaxCoalescedFramesDuringInt = + DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT; + } } else { - if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->RxCoalescingTicksDuringInt = 0; - } + if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->RxCoalescingTicksDuringInt = 0; + } - if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->TxCoalescingTicksDuringInt = 0; - } + if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->TxCoalescingTicksDuringInt = 0; + } - if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->RxMaxCoalescedFramesDuringInt = 0; - } + if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->RxMaxCoalescedFramesDuringInt = 0; + } - if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) - { - pDevice->TxMaxCoalescedFramesDuringInt = 0; - } + if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) + { + pDevice->TxMaxCoalescedFramesDuringInt = 0; + } } #if T3_JUMBO_RCV_RCB_ENTRY_COUNT if(pDevice->RxMtu <= (MAX_STD_RCV_BUFFER_SIZE - 8 /* CRC */)) { - pDevice->RxJumboDescCnt = 0; - if(pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC) - { - pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; - } + pDevice->RxJumboDescCnt = 0; + if(pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC) + { + pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; + } } else { - pDevice->RxJumboBufferSize = (pDevice->RxMtu + 8 /* CRC + VLAN */ + - COMMON_CACHE_LINE_SIZE-1) & ~COMMON_CACHE_LINE_MASK; + pDevice->RxJumboBufferSize = (pDevice->RxMtu + 8 /* CRC + VLAN */ + + COMMON_CACHE_LINE_SIZE-1) & ~COMMON_CACHE_LINE_MASK; - if(pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE) - { - pDevice->RxJumboBufferSize = DEFAULT_JUMBO_RCV_BUFFER_SIZE; - pDevice->RxMtu = pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */; - } - pDevice->TxMtu = pDevice->RxMtu; + if(pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE) + { + pDevice->RxJumboBufferSize = DEFAULT_JUMBO_RCV_BUFFER_SIZE; + pDevice->RxMtu = pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */; + } + pDevice->TxMtu = pDevice->RxMtu; } #else @@ -1444,128 +1439,128 @@ PLM_DEVICE_BLOCK pDevice) pDevice->RxPacketDescCnt = #if T3_JUMBO_RCV_RCB_ENTRY_COUNT - pDevice->RxJumboDescCnt + + pDevice->RxJumboDescCnt + #endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - pDevice->RxStdDescCnt; + pDevice->RxStdDescCnt; if(pDevice->TxMtu < MAX_ETHERNET_PACKET_SIZE_NO_CRC) { - pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; + pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; } if(pDevice->TxMtu > MAX_JUMBO_TX_BUFFER_SIZE) { - pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE; + pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE; } /* Configure the proper ways to get link change interrupt. */ if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO) { - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) - { - pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; - } - else - { - pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY; - } + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) + { + pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; + } + else + { + pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY; + } } else if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - /* Auto-polling does not work on 5700_AX and 5700_BX. */ - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) - { - pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; - } + /* Auto-polling does not work on 5700_AX and 5700_BX. */ + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) + { + pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; + } } /* Determine the method to get link change status. */ if(pDevice->LinkChngMode == T3_LINK_CHNG_MODE_AUTO) { - /* The link status bit in the status block does not work on 5700_AX */ - /* and 5700_BX chips. */ - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) - { - pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; - } - else - { - pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_BLOCK; - } + /* The link status bit in the status block does not work on 5700_AX */ + /* and 5700_BX chips. */ + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) + { + pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; + } + else + { + pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_BLOCK; + } } if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; + pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; } /* Configure PHY led mode. */ if(pDevice->LedMode == LED_MODE_AUTO) { - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - if(pDevice->SubsystemVendorId == T3_SVID_DELL) - { - pDevice->LedMode = LED_MODE_LINK10; - } - else - { - pDevice->LedMode = LED_MODE_THREE_LINK; - - if(EeSigFound && EePhyLedMode != LED_MODE_AUTO) - { - pDevice->LedMode = EePhyLedMode; - } - } - - /* bug? 5701 in LINK10 mode does not seem to work when */ - /* PhyIntMode is LINK_READY. */ - if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 && + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + if(pDevice->SubsystemVendorId == T3_SVID_DELL) + { + pDevice->LedMode = LED_MODE_LINK10; + } + else + { + pDevice->LedMode = LED_MODE_THREE_LINK; + + if(EeSigFound && EePhyLedMode != LED_MODE_AUTO) + { + pDevice->LedMode = EePhyLedMode; + } + } + + /* bug? 5701 in LINK10 mode does not seem to work when */ + /* PhyIntMode is LINK_READY. */ + if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 && #if INCLUDE_TBI_SUPPORT - pDevice->EnableTbi == FALSE && + pDevice->EnableTbi == FALSE && #endif - pDevice->LedMode == LED_MODE_LINK10) - { - pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; - pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; - } - - if(pDevice->EnableTbi) - { - pDevice->LedMode = LED_MODE_THREE_LINK; - } - } - else - { - if(EeSigFound && EePhyLedMode != LED_MODE_AUTO) - { - pDevice->LedMode = EePhyLedMode; - } - else - { - pDevice->LedMode = LED_MODE_OPEN_DRAIN; - } - } + pDevice->LedMode == LED_MODE_LINK10) + { + pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; + pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; + } + + if(pDevice->EnableTbi) + { + pDevice->LedMode = LED_MODE_THREE_LINK; + } + } + else + { + if(EeSigFound && EePhyLedMode != LED_MODE_AUTO) + { + pDevice->LedMode = EePhyLedMode; + } + else + { + pDevice->LedMode = LED_MODE_OPEN_DRAIN; + } + } } /* Enable OneDmaAtOnce. */ if(pDevice->OneDmaAtOnce == BAD_DEFAULT_VALUE) { - pDevice->OneDmaAtOnce = FALSE; + pDevice->OneDmaAtOnce = FALSE; } if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B2) + pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B0 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B2) { - pDevice->WolSpeed = WOL_SPEED_10MB; + pDevice->WolSpeed = WOL_SPEED_10MB; } else { - pDevice->WolSpeed = WOL_SPEED_100MB; + pDevice->WolSpeed = WOL_SPEED_100MB; } /* Offloadings. */ @@ -1574,8 +1569,8 @@ PLM_DEVICE_BLOCK pDevice) /* Turn off task offloading on Ax. */ if(pDevice->ChipRevId == T3_CHIP_ID_5700_B0) { - pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM | - LM_TASK_OFFLOAD_TX_UDP_CHECKSUM); + pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM | + LM_TASK_OFFLOAD_TX_UDP_CHECKSUM); } pDevice->PciState = REG_RD(pDevice, PciCfg.PciState); LM_ReadVPD(pDevice); @@ -1592,44 +1587,44 @@ LM_GetAdapterInfoBySsid( { static LM_ADAPTER_INFO AdapterArr[] = { - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6, PHY_BCM5401_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5, PHY_BCM5701_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6, PHY_BCM8002_PHY_ID, 1}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1 }, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1, PHY_BCM5701_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8, PHY_BCM5701_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10, PHY_BCM5701_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12, PHY_BCM5701_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1, PHY_BCM5701_PHY_ID, 0}, - { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2, PHY_BCM5701_PHY_ID, 0}, - - { T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0 }, - { T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0 }, - { T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1 }, - { T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0 }, - { T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0 }, - - { T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0 }, - { T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0 }, - { T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0 }, - { T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0 }, - - { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0 }, - { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID, 0 }, - { T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1 }, - { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0 }, - { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID, 0 }, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6, PHY_BCM5401_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5, PHY_BCM5701_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6, PHY_BCM8002_PHY_ID, 1}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1 }, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1, PHY_BCM5701_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8, PHY_BCM5701_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10, PHY_BCM5701_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12, PHY_BCM5701_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1, PHY_BCM5701_PHY_ID, 0}, + { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2, PHY_BCM5701_PHY_ID, 0}, + + { T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0 }, + { T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0 }, + { T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1 }, + { T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0 }, + { T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0 }, + + { T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0 }, + { T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0 }, + { T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0 }, + { T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0 }, + + { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0 }, + { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID, 0 }, + { T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1 }, + { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0 }, + { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID, 0 }, }; LM_UINT32 j; for(j = 0; j < sizeof(AdapterArr)/sizeof(LM_ADAPTER_INFO); j++) { - if(AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid) - { - return &AdapterArr[j]; - } + if(AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid) + { + return &AdapterArr[j]; + } } return NULL; @@ -1659,9 +1654,9 @@ PLM_DEVICE_BLOCK pDevice) /* Intialize the queues. */ QQ_InitQueue(&pDevice->RxPacketReceivedQ.Container, - MAX_RX_PACKET_DESC_COUNT); + MAX_RX_PACKET_DESC_COUNT); QQ_InitQueue(&pDevice->RxPacketFreeQ.Container, - MAX_RX_PACKET_DESC_COUNT); + MAX_RX_PACKET_DESC_COUNT); QQ_InitQueue(&pDevice->TxPacketFreeQ.Container,MAX_TX_PACKET_DESC_COUNT); QQ_InitQueue(&pDevice->TxPacketActiveQ.Container,MAX_TX_PACKET_DESC_COUNT); @@ -1670,60 +1665,60 @@ PLM_DEVICE_BLOCK pDevice) /* Allocate shared memory for: status block, the buffers for receive */ /* rings -- standard, mini, jumbo, and return rings. */ Size = T3_STATUS_BLOCK_SIZE + sizeof(T3_STATS_BLOCK) + - T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) + + T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) + #if T3_JUMBO_RCV_RCB_ENTRY_COUNT - T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) + + T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) + #endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD); + T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD); /* Memory for host based Send BD. */ if(pDevice->NicSendBd == FALSE) { - Size += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT; + Size += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT; } /* Allocate the memory block. */ Status = MM_AllocateSharedMemory(pDevice, Size, (PLM_VOID) &pMemVirt, &MemPhy, FALSE); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } /* Program DMA Read/Write */ if (pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) { - pDevice->DmaReadWriteCtrl = 0x763f000f; + pDevice->DmaReadWriteCtrl = 0x763f000f; } else { - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) - { - pDevice->DmaReadWriteCtrl = 0x761f0000; - } - else - { - pDevice->DmaReadWriteCtrl = 0x761b000f; - } - if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 || - pDevice->ChipRevId == T3_CHIP_ID_5703_A2) - { - pDevice->OneDmaAtOnce = TRUE; - } + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) + { + pDevice->DmaReadWriteCtrl = 0x761f0000; + } + else + { + pDevice->DmaReadWriteCtrl = 0x761b000f; + } + if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 || + pDevice->ChipRevId == T3_CHIP_ID_5703_A2) + { + pDevice->OneDmaAtOnce = TRUE; + } } if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) { - pDevice->DmaReadWriteCtrl &= 0xfffffff0; + pDevice->DmaReadWriteCtrl &= 0xfffffff0; } if(pDevice->OneDmaAtOnce) { - pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE; + pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE; } REG_WR(pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl); if (LM_DmaTest(pDevice, pMemVirt, MemPhy, 0x400) != LM_STATUS_SUCCESS) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } /* Status block. */ @@ -1744,7 +1739,7 @@ PLM_DEVICE_BLOCK pDevice) pMemVirt += T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD); LM_INC_PHYSICAL_ADDRESS(&MemPhy, - T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD)); + T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD)); #if T3_JUMBO_RCV_RCB_ENTRY_COUNT /* Receive jumbo BD buffer. */ @@ -1753,7 +1748,7 @@ PLM_DEVICE_BLOCK pDevice) pMemVirt += T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD); LM_INC_PHYSICAL_ADDRESS(&MemPhy, - T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD)); + T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD)); #endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ /* Receive return BD buffer. */ @@ -1762,33 +1757,33 @@ PLM_DEVICE_BLOCK pDevice) pMemVirt += T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD); LM_INC_PHYSICAL_ADDRESS(&MemPhy, - T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD)); + T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD)); /* Set up Send BD. */ if(pDevice->NicSendBd == FALSE) { - pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt; - pDevice->SendBdPhy = MemPhy; + pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt; + pDevice->SendBdPhy = MemPhy; - pMemVirt += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT; - LM_INC_PHYSICAL_ADDRESS(&MemPhy, - sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT); + pMemVirt += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT; + LM_INC_PHYSICAL_ADDRESS(&MemPhy, + sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT); } else { - pDevice->pSendBdVirt = (PT3_SND_BD) - pDevice->pMemView->uIntMem.First32k.BufferDesc; - pDevice->SendBdPhy.High = 0; - pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR; + pDevice->pSendBdVirt = (PT3_SND_BD) + pDevice->pMemView->uIntMem.First32k.BufferDesc; + pDevice->SendBdPhy.High = 0; + pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR; } /* Allocate memory for packet descriptors. */ Size = (pDevice->RxPacketDescCnt + - pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE; + pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE; Status = MM_AllocateMemory(pDevice, Size, (PLM_VOID *) &pPacket); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } pDevice->pPacketDescBase = (PLM_VOID) pPacket; @@ -1796,54 +1791,54 @@ PLM_DEVICE_BLOCK pDevice) /* to the TxPacketFreeQ for each send ring. */ for(j = 0; j < pDevice->TxPacketDescCnt; j++) { - /* Ring index. */ - pPacket->Flags = 0; + /* Ring index. */ + pPacket->Flags = 0; - /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */ - QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket); + /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */ + QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket); - /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ - /* is the total size of the packet descriptor including the */ - /* os-specific extensions in the UM_PACKET structure. */ - pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); + /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ + /* is the total size of the packet descriptor including the */ + /* os-specific extensions in the UM_PACKET structure. */ + pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); } /* for(j.. */ /* Create receive packet descriptors from the memory block and add them */ /* to the RxPacketFreeQ. Create the Standard packet descriptors. */ for(j = 0; j < pDevice->RxStdDescCnt; j++) { - /* Receive producer ring. */ - pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING; + /* Receive producer ring. */ + pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING; - /* Receive buffer size. */ - pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE; + /* Receive buffer size. */ + pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE; - /* Add the descriptor to RxPacketFreeQ. */ - QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + /* Add the descriptor to RxPacketFreeQ. */ + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); - /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ - /* is the total size of the packet descriptor including the */ - /* os-specific extensions in the UM_PACKET structure. */ - pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); + /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ + /* is the total size of the packet descriptor including the */ + /* os-specific extensions in the UM_PACKET structure. */ + pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); } /* for */ #if T3_JUMBO_RCV_RCB_ENTRY_COUNT /* Create the Jumbo packet descriptors. */ for(j = 0; j < pDevice->RxJumboDescCnt; j++) { - /* Receive producer ring. */ - pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING; + /* Receive producer ring. */ + pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING; - /* Receive buffer size. */ - pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize; + /* Receive buffer size. */ + pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize; - /* Add the descriptor to RxPacketFreeQ. */ - QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + /* Add the descriptor to RxPacketFreeQ. */ + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); - /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ - /* is the total size of the packet descriptor including the */ - /* os-specific extensions in the UM_PACKET structure. */ - pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); + /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ + /* is the total size of the packet descriptor including the */ + /* os-specific extensions in the UM_PACKET structure. */ + pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); } /* for */ #endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ @@ -1851,12 +1846,12 @@ PLM_DEVICE_BLOCK pDevice) Status = MM_InitializeUmPackets(pDevice); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } /* if */ /* Default receive mask. */ pDevice->ReceiveMask = LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST | - LM_ACCEPT_UNICAST; + LM_ACCEPT_UNICAST; /* Make sure we are in the first 32k memory window or NicSendBd. */ REG_WR(pDevice, PciCfg.MemWindowBaseAddr, 0); @@ -1865,7 +1860,7 @@ PLM_DEVICE_BLOCK pDevice) Status = LM_ResetAdapter(pDevice); if(Status != LM_STATUS_SUCCESS) { - return Status; + return Status; } /* We are done with initialization. */ @@ -1875,7 +1870,6 @@ PLM_DEVICE_BLOCK pDevice) } /* LM_InitializeAdapter */ - /******************************************************************************/ /* Description: */ /* This function Enables/Disables a given block. */ @@ -1896,399 +1890,399 @@ LM_UINT32 mask,LM_UINT32 cntrl) for(i = 0 ; i < 32; i++) { - if(!(mask & (1 << i))) - continue; - - switch (1 << i) - { - case T3_BLOCK_DMA_RD: - data = REG_RD(pDevice, DmaRead.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~DMA_READ_MODE_ENABLE; - REG_WR(pDevice, DmaRead.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, DmaRead.Mode) & DMA_READ_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, DmaRead.Mode, data | DMA_READ_MODE_ENABLE); - break; - - case T3_BLOCK_DMA_COMP: - data = REG_RD(pDevice,DmaComp.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~DMA_COMP_MODE_ENABLE; - REG_WR(pDevice, DmaComp.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, DmaComp.Mode) & DMA_COMP_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, DmaComp.Mode, data | DMA_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_RX_BD_INITIATOR: - data = REG_RD(pDevice, RcvBdIn.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~RCV_BD_IN_MODE_ENABLE; - REG_WR(pDevice, RcvBdIn.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, RcvBdIn.Mode) & RCV_BD_IN_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, RcvBdIn.Mode,data | RCV_BD_IN_MODE_ENABLE); - break; - - case T3_BLOCK_RX_BD_COMP: - data = REG_RD(pDevice, RcvBdComp.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~RCV_BD_COMP_MODE_ENABLE; - REG_WR(pDevice, RcvBdComp.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, RcvBdComp.Mode) & RCV_BD_COMP_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, RcvBdComp.Mode,data | RCV_BD_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_DMA_WR: - data = REG_RD(pDevice, DmaWrite.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~DMA_WRITE_MODE_ENABLE; - REG_WR(pDevice, DmaWrite.Mode,data); - - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, DmaWrite.Mode,data | DMA_WRITE_MODE_ENABLE); - break; - - case T3_BLOCK_MSI_HANDLER: - data = REG_RD(pDevice, Msi.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~MSI_MODE_ENABLE; - REG_WR(pDevice, Msi.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, Msi.Mode) & MSI_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, Msi.Mode, data |MSI_MODE_ENABLE); - break; - - case T3_BLOCK_RX_LIST_PLMT: - data = REG_RD(pDevice, RcvListPlmt.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~RCV_LIST_PLMT_MODE_ENABLE; - REG_WR(pDevice, RcvListPlmt.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, RcvListPlmt.Mode) & RCV_LIST_PLMT_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, RcvListPlmt.Mode,data | RCV_LIST_PLMT_MODE_ENABLE); - break; - - case T3_BLOCK_RX_LIST_SELECTOR: - data = REG_RD(pDevice, RcvListSel.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~RCV_LIST_SEL_MODE_ENABLE; - REG_WR(pDevice, RcvListSel.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, RcvListSel.Mode) & RCV_LIST_SEL_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, RcvListSel.Mode,data |RCV_LIST_SEL_MODE_ENABLE); - break; - - case T3_BLOCK_RX_DATA_INITIATOR: - data = REG_RD(pDevice, RcvDataBdIn.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~RCV_DATA_BD_IN_MODE_ENABLE; - REG_WR(pDevice, RcvDataBdIn.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_BD_IN_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, RcvDataBdIn.Mode, data | RCV_DATA_BD_IN_MODE_ENABLE); - break; - - case T3_BLOCK_RX_DATA_COMP: - data = REG_RD(pDevice, RcvDataComp.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~RCV_DATA_COMP_MODE_ENABLE; - REG_WR(pDevice, RcvDataComp.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_COMP_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, RcvDataComp.Mode,data | RCV_DATA_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_HOST_COALESING: - data = REG_RD(pDevice, HostCoalesce.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~HOST_COALESCE_ENABLE; - REG_WR(pDevice, HostCoalesce.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, SndBdIn.Mode) & HOST_COALESCE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, HostCoalesce.Mode, data | HOST_COALESCE_ENABLE); - break; - - case T3_BLOCK_MAC_RX_ENGINE: - if(cntrl == LM_DISABLE) - { - pDevice->RxMode &= ~RX_MODE_ENABLE; - REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, MacCtrl.RxMode) & RX_MODE_ENABLE)) - { - break; - } - MM_Wait(10); - } - } - else - { - pDevice->RxMode |= RX_MODE_ENABLE; - REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); - } - break; - - case T3_BLOCK_MBUF_CLUSTER_FREE: - data = REG_RD(pDevice, MbufClusterFree.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE; - REG_WR(pDevice, MbufClusterFree.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, MbufClusterFree.Mode) & MBUF_CLUSTER_FREE_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, MbufClusterFree.Mode, data | MBUF_CLUSTER_FREE_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_BD_INITIATOR: - data = REG_RD(pDevice, SndBdIn.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~SND_BD_IN_MODE_ENABLE; - REG_WR(pDevice, SndBdIn.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, SndBdIn.Mode) & SND_BD_IN_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, SndBdIn.Mode, data | SND_BD_IN_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_BD_COMP: - data = REG_RD(pDevice, SndBdComp.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~SND_BD_COMP_MODE_ENABLE; - REG_WR(pDevice, SndBdComp.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, SndBdComp.Mode) & SND_BD_COMP_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, SndBdComp.Mode, data | SND_BD_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_BD_SELECTOR: - data = REG_RD(pDevice, SndBdSel.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~SND_BD_SEL_MODE_ENABLE; - REG_WR(pDevice, SndBdSel.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, SndBdSel.Mode) & SND_BD_SEL_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, SndBdSel.Mode, data | SND_BD_SEL_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_DATA_INITIATOR: - data = REG_RD(pDevice, SndDataIn.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~T3_SND_DATA_IN_MODE_ENABLE; - REG_WR(pDevice, SndDataIn.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, SndDataIn.Mode) & T3_SND_DATA_IN_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, SndDataIn.Mode,data | T3_SND_DATA_IN_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_DATA_COMP: - data = REG_RD(pDevice, SndDataComp.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~SND_DATA_COMP_MODE_ENABLE; - REG_WR(pDevice, SndDataComp.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, SndDataComp.Mode) & SND_DATA_COMP_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, SndDataComp.Mode,data | SND_DATA_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_MAC_TX_ENGINE: - if(cntrl == LM_DISABLE) - { - pDevice->TxMode &= ~TX_MODE_ENABLE; - REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, MacCtrl.TxMode) & TX_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - { - pDevice->TxMode |= TX_MODE_ENABLE; - REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode); - } - break; - - case T3_BLOCK_MEM_ARBITOR: - data = REG_RD(pDevice, MemArbiter.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~T3_MEM_ARBITER_MODE_ENABLE; - REG_WR(pDevice, MemArbiter.Mode, data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, MemArbiter.Mode) & T3_MEM_ARBITER_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, MemArbiter.Mode,data|T3_MEM_ARBITER_MODE_ENABLE); - break; - - case T3_BLOCK_MBUF_MANAGER: - data = REG_RD(pDevice, BufMgr.Mode); - if (cntrl == LM_DISABLE) - { - data &= ~BUFMGR_MODE_ENABLE; - REG_WR(pDevice, BufMgr.Mode,data); - for(j = 0; j < MaxWaitCnt; j++) - { - if(!(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)) - break; - MM_Wait(10); - } - } - else - REG_WR(pDevice, BufMgr.Mode,data | BUFMGR_MODE_ENABLE); - break; - - case T3_BLOCK_MAC_GLOBAL: - if(cntrl == LM_DISABLE) - { - pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE | - MAC_MODE_ENABLE_RDE | - MAC_MODE_ENABLE_FHDE); - } - else - { - pDevice->MacMode |= (MAC_MODE_ENABLE_TDE | - MAC_MODE_ENABLE_RDE | - MAC_MODE_ENABLE_FHDE); - } - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); - break; - - default: - return LM_STATUS_FAILURE; - } /* switch */ - - if(j >= MaxWaitCnt) - { - return LM_STATUS_FAILURE; - } + if(!(mask & (1 << i))) + continue; + + switch (1 << i) + { + case T3_BLOCK_DMA_RD: + data = REG_RD(pDevice, DmaRead.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~DMA_READ_MODE_ENABLE; + REG_WR(pDevice, DmaRead.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, DmaRead.Mode) & DMA_READ_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, DmaRead.Mode, data | DMA_READ_MODE_ENABLE); + break; + + case T3_BLOCK_DMA_COMP: + data = REG_RD(pDevice,DmaComp.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~DMA_COMP_MODE_ENABLE; + REG_WR(pDevice, DmaComp.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, DmaComp.Mode) & DMA_COMP_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, DmaComp.Mode, data | DMA_COMP_MODE_ENABLE); + break; + + case T3_BLOCK_RX_BD_INITIATOR: + data = REG_RD(pDevice, RcvBdIn.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~RCV_BD_IN_MODE_ENABLE; + REG_WR(pDevice, RcvBdIn.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, RcvBdIn.Mode) & RCV_BD_IN_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, RcvBdIn.Mode,data | RCV_BD_IN_MODE_ENABLE); + break; + + case T3_BLOCK_RX_BD_COMP: + data = REG_RD(pDevice, RcvBdComp.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~RCV_BD_COMP_MODE_ENABLE; + REG_WR(pDevice, RcvBdComp.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, RcvBdComp.Mode) & RCV_BD_COMP_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, RcvBdComp.Mode,data | RCV_BD_COMP_MODE_ENABLE); + break; + + case T3_BLOCK_DMA_WR: + data = REG_RD(pDevice, DmaWrite.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~DMA_WRITE_MODE_ENABLE; + REG_WR(pDevice, DmaWrite.Mode,data); + + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, DmaWrite.Mode,data | DMA_WRITE_MODE_ENABLE); + break; + + case T3_BLOCK_MSI_HANDLER: + data = REG_RD(pDevice, Msi.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~MSI_MODE_ENABLE; + REG_WR(pDevice, Msi.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, Msi.Mode) & MSI_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, Msi.Mode, data |MSI_MODE_ENABLE); + break; + + case T3_BLOCK_RX_LIST_PLMT: + data = REG_RD(pDevice, RcvListPlmt.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~RCV_LIST_PLMT_MODE_ENABLE; + REG_WR(pDevice, RcvListPlmt.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, RcvListPlmt.Mode) & RCV_LIST_PLMT_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, RcvListPlmt.Mode,data | RCV_LIST_PLMT_MODE_ENABLE); + break; + + case T3_BLOCK_RX_LIST_SELECTOR: + data = REG_RD(pDevice, RcvListSel.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~RCV_LIST_SEL_MODE_ENABLE; + REG_WR(pDevice, RcvListSel.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, RcvListSel.Mode) & RCV_LIST_SEL_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, RcvListSel.Mode,data |RCV_LIST_SEL_MODE_ENABLE); + break; + + case T3_BLOCK_RX_DATA_INITIATOR: + data = REG_RD(pDevice, RcvDataBdIn.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~RCV_DATA_BD_IN_MODE_ENABLE; + REG_WR(pDevice, RcvDataBdIn.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_BD_IN_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, RcvDataBdIn.Mode, data | RCV_DATA_BD_IN_MODE_ENABLE); + break; + + case T3_BLOCK_RX_DATA_COMP: + data = REG_RD(pDevice, RcvDataComp.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~RCV_DATA_COMP_MODE_ENABLE; + REG_WR(pDevice, RcvDataComp.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_COMP_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, RcvDataComp.Mode,data | RCV_DATA_COMP_MODE_ENABLE); + break; + + case T3_BLOCK_HOST_COALESING: + data = REG_RD(pDevice, HostCoalesce.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~HOST_COALESCE_ENABLE; + REG_WR(pDevice, HostCoalesce.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, SndBdIn.Mode) & HOST_COALESCE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, HostCoalesce.Mode, data | HOST_COALESCE_ENABLE); + break; + + case T3_BLOCK_MAC_RX_ENGINE: + if(cntrl == LM_DISABLE) + { + pDevice->RxMode &= ~RX_MODE_ENABLE; + REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, MacCtrl.RxMode) & RX_MODE_ENABLE)) + { + break; + } + MM_Wait(10); + } + } + else + { + pDevice->RxMode |= RX_MODE_ENABLE; + REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); + } + break; + + case T3_BLOCK_MBUF_CLUSTER_FREE: + data = REG_RD(pDevice, MbufClusterFree.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE; + REG_WR(pDevice, MbufClusterFree.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, MbufClusterFree.Mode) & MBUF_CLUSTER_FREE_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, MbufClusterFree.Mode, data | MBUF_CLUSTER_FREE_MODE_ENABLE); + break; + + case T3_BLOCK_SEND_BD_INITIATOR: + data = REG_RD(pDevice, SndBdIn.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~SND_BD_IN_MODE_ENABLE; + REG_WR(pDevice, SndBdIn.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, SndBdIn.Mode) & SND_BD_IN_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, SndBdIn.Mode, data | SND_BD_IN_MODE_ENABLE); + break; + + case T3_BLOCK_SEND_BD_COMP: + data = REG_RD(pDevice, SndBdComp.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~SND_BD_COMP_MODE_ENABLE; + REG_WR(pDevice, SndBdComp.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, SndBdComp.Mode) & SND_BD_COMP_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, SndBdComp.Mode, data | SND_BD_COMP_MODE_ENABLE); + break; + + case T3_BLOCK_SEND_BD_SELECTOR: + data = REG_RD(pDevice, SndBdSel.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~SND_BD_SEL_MODE_ENABLE; + REG_WR(pDevice, SndBdSel.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, SndBdSel.Mode) & SND_BD_SEL_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, SndBdSel.Mode, data | SND_BD_SEL_MODE_ENABLE); + break; + + case T3_BLOCK_SEND_DATA_INITIATOR: + data = REG_RD(pDevice, SndDataIn.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~T3_SND_DATA_IN_MODE_ENABLE; + REG_WR(pDevice, SndDataIn.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, SndDataIn.Mode) & T3_SND_DATA_IN_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, SndDataIn.Mode,data | T3_SND_DATA_IN_MODE_ENABLE); + break; + + case T3_BLOCK_SEND_DATA_COMP: + data = REG_RD(pDevice, SndDataComp.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~SND_DATA_COMP_MODE_ENABLE; + REG_WR(pDevice, SndDataComp.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, SndDataComp.Mode) & SND_DATA_COMP_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, SndDataComp.Mode,data | SND_DATA_COMP_MODE_ENABLE); + break; + + case T3_BLOCK_MAC_TX_ENGINE: + if(cntrl == LM_DISABLE) + { + pDevice->TxMode &= ~TX_MODE_ENABLE; + REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, MacCtrl.TxMode) & TX_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + { + pDevice->TxMode |= TX_MODE_ENABLE; + REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode); + } + break; + + case T3_BLOCK_MEM_ARBITOR: + data = REG_RD(pDevice, MemArbiter.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~T3_MEM_ARBITER_MODE_ENABLE; + REG_WR(pDevice, MemArbiter.Mode, data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, MemArbiter.Mode) & T3_MEM_ARBITER_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, MemArbiter.Mode,data|T3_MEM_ARBITER_MODE_ENABLE); + break; + + case T3_BLOCK_MBUF_MANAGER: + data = REG_RD(pDevice, BufMgr.Mode); + if (cntrl == LM_DISABLE) + { + data &= ~BUFMGR_MODE_ENABLE; + REG_WR(pDevice, BufMgr.Mode,data); + for(j = 0; j < MaxWaitCnt; j++) + { + if(!(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)) + break; + MM_Wait(10); + } + } + else + REG_WR(pDevice, BufMgr.Mode,data | BUFMGR_MODE_ENABLE); + break; + + case T3_BLOCK_MAC_GLOBAL: + if(cntrl == LM_DISABLE) + { + pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE | + MAC_MODE_ENABLE_RDE | + MAC_MODE_ENABLE_FHDE); + } + else + { + pDevice->MacMode |= (MAC_MODE_ENABLE_TDE | + MAC_MODE_ENABLE_RDE | + MAC_MODE_ENABLE_FHDE); + } + REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); + break; + + default: + return LM_STATUS_FAILURE; + } /* switch */ + + if(j >= MaxWaitCnt) + { + return LM_STATUS_FAILURE; + } } return LM_STATUS_SUCCESS; @@ -2318,7 +2312,7 @@ PLM_DEVICE_BLOCK pDevice) /* Disable transmit and receive DMA engines. Abort all pending requests. */ if(pDevice->InitDone) { - LM_Abort(pDevice); + LM_Abort(pDevice); } pDevice->ShuttingDown = FALSE; @@ -2329,36 +2323,36 @@ PLM_DEVICE_BLOCK pDevice) /* in other chip revisions. */ if(pDevice->DelayPciGrant) { - Value32 = REG_RD(pDevice, PciCfg.ClockCtrl); - REG_WR(pDevice, PciCfg.ClockCtrl, Value32 | BIT_31); + Value32 = REG_RD(pDevice, PciCfg.ClockCtrl); + REG_WR(pDevice, PciCfg.ClockCtrl, Value32 | BIT_31); } if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) - { - Value32 = REG_RD(pDevice, PciCfg.PciState); - Value32 |= T3_PCI_STATE_RETRY_SAME_DMA; - REG_WR(pDevice, PciCfg.PciState, Value32); - } + if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) + { + Value32 = REG_RD(pDevice, PciCfg.PciState); + Value32 |= T3_PCI_STATE_RETRY_SAME_DMA; + REG_WR(pDevice, PciCfg.PciState, Value32); + } } /* Enable TaggedStatus mode. */ if(pDevice->UseTaggedStatus) { - pDevice->MiscHostCtrl |= MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE; + pDevice->MiscHostCtrl |= MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE; } /* Restore PCI configuration registers. */ MM_WriteConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG, - pDevice->SavedCacheLineReg); + pDevice->SavedCacheLineReg); MM_WriteConfig32(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, - (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId); + (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId); /* Clear the statistics block. */ for(j = 0x0300; j < 0x0b00; j++) { - MEM_WR_OFFSET(pDevice, j, 0); + MEM_WR_OFFSET(pDevice, j, 0); } /* Initialize the statistis Block */ @@ -2383,8 +2377,8 @@ PLM_DEVICE_BLOCK pDevice) /* Receive jumbo BD buffer. */ for(k = 0; k < T3_JUMBO_RCV_RCB_ENTRY_COUNT; k++) { - pDevice->pRxJumboBdVirt[k].HostAddr.High = 0; - pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0; + pDevice->pRxJumboBdVirt[k].HostAddr.High = 0; + pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0; } #endif @@ -2393,46 +2387,46 @@ PLM_DEVICE_BLOCK pDevice) /* GRC mode control register. */ #ifdef BIG_ENDIAN_PCI /* Jimmy, this ifdef block deleted in new code! */ Value32 = - GRC_MODE_WORD_SWAP_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_INT_ON_MAC_ATTN | - GRC_MODE_HOST_STACK_UP; + GRC_MODE_WORD_SWAP_DATA | + GRC_MODE_WORD_SWAP_NON_FRAME_DATA | + GRC_MODE_INT_ON_MAC_ATTN | + GRC_MODE_HOST_STACK_UP; #else /* No CPU Swap modes for PCI IO */ Value32 = #ifdef BIG_ENDIAN_HOST - GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_BYTE_SWAP_DATA | - GRC_MODE_WORD_SWAP_DATA | + GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | + GRC_MODE_WORD_SWAP_NON_FRAME_DATA | + GRC_MODE_BYTE_SWAP_DATA | + GRC_MODE_WORD_SWAP_DATA | #else - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_BYTE_SWAP_DATA | - GRC_MODE_WORD_SWAP_DATA | + GRC_MODE_WORD_SWAP_NON_FRAME_DATA | + GRC_MODE_BYTE_SWAP_DATA | + GRC_MODE_WORD_SWAP_DATA | #endif - GRC_MODE_INT_ON_MAC_ATTN | - GRC_MODE_HOST_STACK_UP; + GRC_MODE_INT_ON_MAC_ATTN | + GRC_MODE_HOST_STACK_UP; #endif /* !BIG_ENDIAN_PCI */ /* Configure send BD mode. */ if(pDevice->NicSendBd == FALSE) { - Value32 |= GRC_MODE_HOST_SEND_BDS; + Value32 |= GRC_MODE_HOST_SEND_BDS; } else { - Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS; + Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS; } /* Configure pseudo checksum mode. */ if(pDevice->NoTxPseudoHdrChksum) { - Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM; + Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM; } if(pDevice->NoRxPseudoHdrChksum) { - Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM; + Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM; } REG_WR(pDevice, Grc.Mode, Value32); @@ -2452,60 +2446,60 @@ PLM_DEVICE_BLOCK pDevice) /* Configure the DMA read MBUF low water mark. */ if(pDevice->DmaMbufLowMark) { - REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark, - pDevice->DmaMbufLowMark); + REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark, + pDevice->DmaMbufLowMark); } else { - if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) - { - REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark, - T3_DEF_DMA_MBUF_LOW_WMARK); - } - else - { - REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark, - T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO); - } + if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) + { + REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark, + T3_DEF_DMA_MBUF_LOW_WMARK); + } + else + { + REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark, + T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO); + } } /* Configure the MAC Rx MBUF low water mark. */ if(pDevice->RxMacMbufLowMark) { - REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark, - pDevice->RxMacMbufLowMark); + REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark, + pDevice->RxMacMbufLowMark); } else { - if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) - { - REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark, - T3_DEF_RX_MAC_MBUF_LOW_WMARK); - } - else - { - REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark, - T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO); - } + if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) + { + REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark, + T3_DEF_RX_MAC_MBUF_LOW_WMARK); + } + else + { + REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark, + T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO); + } } /* Configure the MBUF high water mark. */ if(pDevice->MbufHighMark) { - REG_WR(pDevice, BufMgr.MbufHighWaterMark, pDevice->MbufHighMark); + REG_WR(pDevice, BufMgr.MbufHighWaterMark, pDevice->MbufHighMark); } else { - if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) - { - REG_WR(pDevice, BufMgr.MbufHighWaterMark, - T3_DEF_MBUF_HIGH_WMARK); - } - else - { - REG_WR(pDevice, BufMgr.MbufHighWaterMark, - T3_DEF_MBUF_HIGH_WMARK_JUMBO); - } + if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) + { + REG_WR(pDevice, BufMgr.MbufHighWaterMark, + T3_DEF_MBUF_HIGH_WMARK); + } + else + { + REG_WR(pDevice, BufMgr.MbufHighWaterMark, + T3_DEF_MBUF_HIGH_WMARK_JUMBO); + } } REG_WR(pDevice, BufMgr.DmaLowWaterMark, T3_DEF_DMA_DESC_LOW_WMARK); @@ -2516,14 +2510,14 @@ PLM_DEVICE_BLOCK pDevice) for(j = 0 ;j < 2000; j++) { - if(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE) - break; - MM_Wait(10); + if(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE) + break; + MM_Wait(10); } if(j >= 2000) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } /* Enable the FTQs. */ @@ -2533,32 +2527,32 @@ PLM_DEVICE_BLOCK pDevice) /* Wait until FTQ is ready */ for(j = 0; j < 2000; j++) { - if(REG_RD(pDevice, Ftq.Reset) == 0) - break; - MM_Wait(10); + if(REG_RD(pDevice, Ftq.Reset) == 0) + break; + MM_Wait(10); } if(j >= 2000) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } /* Initialize the Standard Receive RCB. */ REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.High, - pDevice->RxStdBdPhy.High); + pDevice->RxStdBdPhy.High); REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.Low, - pDevice->RxStdBdPhy.Low); + pDevice->RxStdBdPhy.Low); REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags, - MAX_STD_RCV_BUFFER_SIZE << 16); + MAX_STD_RCV_BUFFER_SIZE << 16); /* Initialize the Jumbo Receive RCB. */ REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, - T3_RCB_FLAG_RING_DISABLED); + T3_RCB_FLAG_RING_DISABLED); #if T3_JUMBO_RCV_RCB_ENTRY_COUNT REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.High, - pDevice->RxJumboBdPhy.High); + pDevice->RxJumboBdPhy.High); REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.Low, - pDevice->RxJumboBdPhy.Low); + pDevice->RxJumboBdPhy.Low); REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, 0); @@ -2566,13 +2560,13 @@ PLM_DEVICE_BLOCK pDevice) /* Initialize the Mini Receive RCB. */ REG_WR(pDevice, RcvDataBdIn.MiniRcvRcb.u.MaxLen_Flags, - T3_RCB_FLAG_RING_DISABLED); + T3_RCB_FLAG_RING_DISABLED); { - REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr, - (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR); - REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr, - (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR); + REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr, + (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR); + REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr, + (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR); } /* Receive BD Ring replenish threshold. */ @@ -2583,7 +2577,7 @@ PLM_DEVICE_BLOCK pDevice) /* Disable all the unused rings. */ for(j = 0; j < T3_MAX_SEND_RCB_COUNT; j++) { - MEM_WR(pDevice, SendRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED); + MEM_WR(pDevice, SendRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED); } /* for */ /* Initialize the indices. */ @@ -2596,54 +2590,54 @@ PLM_DEVICE_BLOCK pDevice) /* Set up host or NIC based send RCB. */ if(pDevice->NicSendBd == FALSE) { - MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, - pDevice->SendBdPhy.High); - MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, - pDevice->SendBdPhy.Low); + MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, + pDevice->SendBdPhy.High); + MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, + pDevice->SendBdPhy.Low); - /* Set up the NIC ring address in the RCB. */ - MEM_WR(pDevice, SendRcb[0].NicRingAddr,T3_NIC_SND_BUFFER_DESC_ADDR); + /* Set up the NIC ring address in the RCB. */ + MEM_WR(pDevice, SendRcb[0].NicRingAddr,T3_NIC_SND_BUFFER_DESC_ADDR); - /* Setup the RCB. */ - MEM_WR(pDevice, SendRcb[0].u.MaxLen_Flags, - T3_SEND_RCB_ENTRY_COUNT << 16); + /* Setup the RCB. */ + MEM_WR(pDevice, SendRcb[0].u.MaxLen_Flags, + T3_SEND_RCB_ENTRY_COUNT << 16); - for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) - { - pDevice->pSendBdVirt[k].HostAddr.High = 0; - pDevice->pSendBdVirt[k].HostAddr.Low = 0; - } + for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) + { + pDevice->pSendBdVirt[k].HostAddr.High = 0; + pDevice->pSendBdVirt[k].HostAddr.Low = 0; + } } else { - MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, 0); - MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, 0); - MEM_WR(pDevice, SendRcb[0].NicRingAddr, - pDevice->SendBdPhy.Low); + MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, 0); + MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, 0); + MEM_WR(pDevice, SendRcb[0].NicRingAddr, + pDevice->SendBdPhy.Low); - for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) - { - __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.High)); - __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.Low)); - __raw_writel(0, &(pDevice->pSendBdVirt[k].u1.Len_Flags)); - pDevice->ShadowSendBd[k].HostAddr.High = 0; - pDevice->ShadowSendBd[k].u1.Len_Flags = 0; - } + for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) + { + __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.High)); + __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.Low)); + __raw_writel(0, &(pDevice->pSendBdVirt[k].u1.Len_Flags)); + pDevice->ShadowSendBd[k].HostAddr.High = 0; + pDevice->ShadowSendBd[k].u1.Len_Flags = 0; + } } atomic_set(&pDevice->SendBdLeft, T3_SEND_RCB_ENTRY_COUNT-1); /* Configure the receive return rings. */ for(j = 0; j < T3_MAX_RCV_RETURN_RCB_COUNT; j++) { - MEM_WR(pDevice, RcvRetRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED); + MEM_WR(pDevice, RcvRetRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED); } pDevice->RcvRetConIdx = 0; MEM_WR(pDevice, RcvRetRcb[0].HostRingAddr.High, - pDevice->RcvRetBdPhy.High); + pDevice->RcvRetBdPhy.High); MEM_WR(pDevice, RcvRetRcb[0].HostRingAddr.Low, - pDevice->RcvRetBdPhy.Low); + pDevice->RcvRetBdPhy.Low); /* Set up the NIC ring address in the RCB. */ /* Not very clear from the spec. I am guessing that for Receive */ @@ -2652,7 +2646,7 @@ PLM_DEVICE_BLOCK pDevice) /* Setup the RCB. */ MEM_WR(pDevice, RcvRetRcb[0].u.MaxLen_Flags, - T3_RCV_RETURN_RCB_ENTRY_COUNT << 16); + T3_RCV_RETURN_RCB_ENTRY_COUNT << 16); /* Reinitialize RX ring producer index */ MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, 0); @@ -2677,9 +2671,9 @@ PLM_DEVICE_BLOCK pDevice) /* Initialize the transmit random backoff seed. */ Value32 = (pDevice->NodeAddress[0] + pDevice->NodeAddress[1] + - pDevice->NodeAddress[2] + pDevice->NodeAddress[3] + - pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) & - MAC_TX_BACKOFF_SEED_MASK; + pDevice->NodeAddress[2] + pDevice->NodeAddress[3] + + pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) & + MAC_TX_BACKOFF_SEED_MASK; REG_WR(pDevice, MacCtrl.TxBackoffSeed, Value32); /* Receive MTU. Frames larger than the MTU is marked as oversized. */ @@ -2708,88 +2702,88 @@ PLM_DEVICE_BLOCK pDevice) /* Enable Send Data Initator Statistics */ REG_WR(pDevice, SndDataIn.StatsEnableMask,0xffffff); REG_WR(pDevice, SndDataIn.StatsCtrl, - T3_SND_DATA_IN_STATS_CTRL_ENABLE | \ - T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE); + T3_SND_DATA_IN_STATS_CTRL_ENABLE | \ + T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE); /* Disable the host coalescing state machine before configuring it's */ /* parameters. */ REG_WR(pDevice, HostCoalesce.Mode, 0); for(j = 0; j < 2000; j++) { - Value32 = REG_RD(pDevice, HostCoalesce.Mode); - if(!(Value32 & HOST_COALESCE_ENABLE)) - { - break; - } - MM_Wait(10); + Value32 = REG_RD(pDevice, HostCoalesce.Mode); + if(!(Value32 & HOST_COALESCE_ENABLE)) + { + break; + } + MM_Wait(10); } /* Host coalescing configurations. */ REG_WR(pDevice, HostCoalesce.RxCoalescingTicks, pDevice->RxCoalescingTicks); REG_WR(pDevice, HostCoalesce.TxCoalescingTicks, pDevice->TxCoalescingTicks); REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFrames, - pDevice->RxMaxCoalescedFrames); + pDevice->RxMaxCoalescedFrames); REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFrames, - pDevice->TxMaxCoalescedFrames); + pDevice->TxMaxCoalescedFrames); REG_WR(pDevice, HostCoalesce.RxCoalescedTickDuringInt, - pDevice->RxCoalescingTicksDuringInt); + pDevice->RxCoalescingTicksDuringInt); REG_WR(pDevice, HostCoalesce.TxCoalescedTickDuringInt, - pDevice->TxCoalescingTicksDuringInt); + pDevice->TxCoalescingTicksDuringInt); REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt, - pDevice->RxMaxCoalescedFramesDuringInt); + pDevice->RxMaxCoalescedFramesDuringInt); REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFramesDuringInt, - pDevice->TxMaxCoalescedFramesDuringInt); + pDevice->TxMaxCoalescedFramesDuringInt); /* Initialize the address of the status block. The NIC will DMA */ /* the status block to this memory which resides on the host. */ REG_WR(pDevice, HostCoalesce.StatusBlkHostAddr.High, - pDevice->StatusBlkPhy.High); + pDevice->StatusBlkPhy.High); REG_WR(pDevice, HostCoalesce.StatusBlkHostAddr.Low, - pDevice->StatusBlkPhy.Low); + pDevice->StatusBlkPhy.Low); /* Initialize the address of the statistics block. The NIC will DMA */ /* the statistics to this block of memory. */ REG_WR(pDevice, HostCoalesce.StatsBlkHostAddr.High, - pDevice->StatsBlkPhy.High); + pDevice->StatsBlkPhy.High); REG_WR(pDevice, HostCoalesce.StatsBlkHostAddr.Low, - pDevice->StatsBlkPhy.Low); + pDevice->StatsBlkPhy.Low); REG_WR(pDevice, HostCoalesce.StatsCoalescingTicks, - pDevice->StatsCoalescingTicks); + pDevice->StatsCoalescingTicks); REG_WR(pDevice, HostCoalesce.StatsBlkNicAddr, 0x300); REG_WR(pDevice, HostCoalesce.StatusBlkNicAddr,0xb00); /* Enable Host Coalesing state machine */ REG_WR(pDevice, HostCoalesce.Mode, HOST_COALESCE_ENABLE | - pDevice->CoalesceMode); + pDevice->CoalesceMode); /* Enable the Receive BD Completion state machine. */ REG_WR(pDevice, RcvBdComp.Mode, RCV_BD_COMP_MODE_ENABLE | - RCV_BD_COMP_MODE_ATTN_ENABLE); + RCV_BD_COMP_MODE_ATTN_ENABLE); /* Enable the Receive List Placement state machine. */ REG_WR(pDevice, RcvListPlmt.Mode, RCV_LIST_PLMT_MODE_ENABLE); /* Enable the Receive List Selector state machine. */ REG_WR(pDevice, RcvListSel.Mode, RCV_LIST_SEL_MODE_ENABLE | - RCV_LIST_SEL_MODE_ATTN_ENABLE); + RCV_LIST_SEL_MODE_ATTN_ENABLE); /* Enable transmit DMA, clear statistics. */ pDevice->MacMode = MAC_MODE_ENABLE_TX_STATISTICS | - MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE | - MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE; + MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE | + MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE; REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS); + MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS); /* GRC miscellaneous local control register. */ pDevice->GrcLocalCtrl = GRC_MISC_LOCAL_CTRL_INT_ON_ATTN | - GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM; + GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM; if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1; + pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1; } REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl); @@ -2798,13 +2792,13 @@ PLM_DEVICE_BLOCK pDevice) /* Reset RX counters. */ for(j = 0; j < sizeof(LM_RX_COUNTERS); j++) { - ((PLM_UINT8) &pDevice->RxCounters)[j] = 0; + ((PLM_UINT8) &pDevice->RxCounters)[j] = 0; } /* Reset TX counters. */ for(j = 0; j < sizeof(LM_TX_COUNTERS); j++) { - ((PLM_UINT8) &pDevice->TxCounters)[j] = 0; + ((PLM_UINT8) &pDevice->TxCounters)[j] = 0; } MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 0); @@ -2814,53 +2808,53 @@ PLM_DEVICE_BLOCK pDevice) /* Enable the DMA Write state machine. */ Value32 = DMA_WRITE_MODE_ENABLE | - DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE | - DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE | - DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE | - DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE | - DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE | - DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE | - DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE | - DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE; + DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE | + DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE | + DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE | + DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE | + DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE | + DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE | + DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE | + DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE; REG_WR(pDevice, DmaWrite.Mode, Value32); if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) { - if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) - { - Value16 = REG_RD(pDevice, PciCfg.PciXCommand); - Value16 &= ~(PCIX_CMD_MAX_SPLIT_MASK | PCIX_CMD_MAX_BURST_MASK); - Value16 |= ((PCIX_CMD_MAX_BURST_CPIOB << PCIX_CMD_MAX_BURST_SHL) & - PCIX_CMD_MAX_BURST_MASK); - if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) - { - Value16 |= (pDevice->SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL) - & PCIX_CMD_MAX_SPLIT_MASK; - } - REG_WR(pDevice, PciCfg.PciXCommand, Value16); - } + if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) + { + Value16 = REG_RD(pDevice, PciCfg.PciXCommand); + Value16 &= ~(PCIX_CMD_MAX_SPLIT_MASK | PCIX_CMD_MAX_BURST_MASK); + Value16 |= ((PCIX_CMD_MAX_BURST_CPIOB << PCIX_CMD_MAX_BURST_SHL) & + PCIX_CMD_MAX_BURST_MASK); + if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) + { + Value16 |= (pDevice->SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL) + & PCIX_CMD_MAX_SPLIT_MASK; + } + REG_WR(pDevice, PciCfg.PciXCommand, Value16); + } } /* Enable the Read DMA state machine. */ Value32 = DMA_READ_MODE_ENABLE | - DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE | - DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE | - DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE | - DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE | - DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE | - DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE | - DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE | - DMA_READ_MODE_LONG_READ_ATTN_ENABLE; + DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE | + DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE | + DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE | + DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE | + DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE | + DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE | + DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE | + DMA_READ_MODE_LONG_READ_ATTN_ENABLE; if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) { - Value32 |= DMA_READ_MODE_SPLIT_ENABLE; + Value32 |= DMA_READ_MODE_SPLIT_ENABLE; } REG_WR(pDevice, DmaRead.Mode, Value32); /* Enable the Receive Data Completion state machine. */ REG_WR(pDevice, RcvDataComp.Mode, RCV_DATA_COMP_MODE_ENABLE | - RCV_DATA_COMP_MODE_ATTN_ENABLE); + RCV_DATA_COMP_MODE_ATTN_ENABLE); /* Enable the Mbuf Cluster Free state machine. */ REG_WR(pDevice, MbufClusterFree.Mode, MBUF_CLUSTER_FREE_MODE_ENABLE); @@ -2870,32 +2864,32 @@ PLM_DEVICE_BLOCK pDevice) /* Enable the Send BD Completion state machine. */ REG_WR(pDevice, SndBdComp.Mode, SND_BD_COMP_MODE_ENABLE | - SND_BD_COMP_MODE_ATTN_ENABLE); + SND_BD_COMP_MODE_ATTN_ENABLE); /* Enable the Receive BD Initiator state machine. */ REG_WR(pDevice, RcvBdIn.Mode, RCV_BD_IN_MODE_ENABLE | - RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE); + RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE); /* Enable the Receive Data and Receive BD Initiator state machine. */ REG_WR(pDevice, RcvDataBdIn.Mode, RCV_DATA_BD_IN_MODE_ENABLE | - RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE); + RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE); /* Enable the Send Data Initiator state machine. */ REG_WR(pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE); /* Enable the Send BD Initiator state machine. */ REG_WR(pDevice, SndBdIn.Mode, SND_BD_IN_MODE_ENABLE | - SND_BD_IN_MODE_ATTN_ENABLE); + SND_BD_IN_MODE_ATTN_ENABLE); /* Enable the Send BD Selector state machine. */ REG_WR(pDevice, SndBdSel.Mode, SND_BD_SEL_MODE_ENABLE | - SND_BD_SEL_MODE_ATTN_ENABLE); + SND_BD_SEL_MODE_ATTN_ENABLE); #if INCLUDE_5701_AX_FIX /* Load the firmware for the 5701_A0 workaround. */ if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0) { - LM_LoadRlsFirmware(pDevice); + LM_LoadRlsFirmware(pDevice); } #endif @@ -2909,9 +2903,9 @@ PLM_DEVICE_BLOCK pDevice) if (pDevice->RestoreOnWakeUp) { - pDevice->RestoreOnWakeUp = FALSE; - pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg; - pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType; + pDevice->RestoreOnWakeUp = FALSE; + pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg; + pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType; } /* Disable auto polling. */ @@ -2919,20 +2913,20 @@ PLM_DEVICE_BLOCK pDevice) REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = LED_CTRL_PHY_MODE_1; + Value32 = LED_CTRL_PHY_MODE_1; } else { - if(pDevice->LedMode == LED_MODE_OUTPUT) - { - Value32 = LED_CTRL_PHY_MODE_2; - } - else - { - Value32 = LED_CTRL_PHY_MODE_1; - } + if(pDevice->LedMode == LED_MODE_OUTPUT) + { + Value32 = LED_CTRL_PHY_MODE_2; + } + else + { + Value32 = LED_CTRL_PHY_MODE_1; + } } REG_WR(pDevice, MacCtrl.LedCtrl, Value32); @@ -2941,22 +2935,22 @@ PLM_DEVICE_BLOCK pDevice) if (pDevice->EnableTbi) { - REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_RESET); - MM_Wait(10); - REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); - if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1) - { - REG_WR(pDevice, MacCtrl.SerdesCfg, 0x616000); - } + REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_RESET); + MM_Wait(10); + REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); + if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1) + { + REG_WR(pDevice, MacCtrl.SerdesCfg, 0x616000); + } } /* Setup the phy chip. */ LM_SetupPhy(pDevice); if (!pDevice->EnableTbi) { - /* Clear CRC stats */ - LM_ReadPhy(pDevice, 0x1e, &Value32); - LM_WritePhy(pDevice, 0x1e, Value32 | 0x8000); - LM_ReadPhy(pDevice, 0x14, &Value32); + /* Clear CRC stats */ + LM_ReadPhy(pDevice, 0x1e, &Value32); + LM_WritePhy(pDevice, 0x1e, Value32 | 0x8000); + LM_ReadPhy(pDevice, 0x14, &Value32); } /* Set up the receive mask. */ @@ -2965,13 +2959,13 @@ PLM_DEVICE_BLOCK pDevice) /* Queue Rx packet buffers. */ if(pDevice->QueueRxPackets) { - LM_QueueRxPackets(pDevice); + LM_QueueRxPackets(pDevice); } /* Enable interrupt to the host. */ if(pDevice->InitDone) { - LM_EnableInterrupt(pDevice); + LM_EnableInterrupt(pDevice); } return LM_STATUS_SUCCESS; @@ -2990,14 +2984,13 @@ LM_DisableInterrupt( PLM_DEVICE_BLOCK pDevice) { REG_WR(pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl | - MISC_HOST_CTRL_MASK_PCI_INT); + MISC_HOST_CTRL_MASK_PCI_INT); MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1); return LM_STATUS_SUCCESS; } - /******************************************************************************/ /* Description: */ /* This routine enables the adapter to generate interrupts. */ @@ -3010,20 +3003,19 @@ LM_EnableInterrupt( PLM_DEVICE_BLOCK pDevice) { REG_WR(pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl & - ~MISC_HOST_CTRL_MASK_PCI_INT); + ~MISC_HOST_CTRL_MASK_PCI_INT); MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 0); if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) { - REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_SET_INT); + REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | + GRC_MISC_LOCAL_CTRL_SET_INT); } return LM_STATUS_SUCCESS; } - /******************************************************************************/ /* Description: */ /* This routine puts a packet on the wire if there is a transmit DMA */ @@ -3045,7 +3037,7 @@ LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) LM_UINT32 Idx; if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) { - return LM_5700SendPacket(pDevice, pPacket); + return LM_5700SendPacket(pDevice, pPacket); } /* Update the SendBdLeft count. */ @@ -3059,103 +3051,103 @@ LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) /* Next producer index. */ if (pDevice->NicSendBd == TRUE) { - T3_64BIT_HOST_ADDR paddr; - - pShadowSendBd = &pDevice->ShadowSendBd[Idx]; - for(FragCount = 0; ; ) - { - MM_MapTxDma(pDevice, pPacket, &paddr, &Len, FragCount); - /* Initialize the pointer to the send buffer fragment. */ - if (paddr.High != pShadowSendBd->HostAddr.High) - { - __raw_writel(paddr.High, &(pSendBd->HostAddr.High)); - pShadowSendBd->HostAddr.High = paddr.High; - } - __raw_writel(paddr.Low, &(pSendBd->HostAddr.Low)); - - /* Setup the control flags and send buffer size. */ - Value32 = (Len << 16) | pPacket->Flags; - - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) - { - Value32 |= SND_BD_FLAG_END; - if (Value32 != pShadowSendBd->u1.Len_Flags) - { - __raw_writel(Value32, &(pSendBd->u1.Len_Flags)); - pShadowSendBd->u1.Len_Flags = Value32; - } - if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { - __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag)); - } - break; - } - else - { - if (Value32 != pShadowSendBd->u1.Len_Flags) - { - __raw_writel(Value32, &(pSendBd->u1.Len_Flags)); - pShadowSendBd->u1.Len_Flags = Value32; - } - if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { - __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag)); - } - } - - pSendBd++; - pShadowSendBd++; - if (Idx == 0) - { - pSendBd = &pDevice->pSendBdVirt[0]; - pShadowSendBd = &pDevice->ShadowSendBd[0]; - } - } /* for */ - - /* Put the packet descriptor in the ActiveQ. */ - QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket); - - wmb(); - MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); + T3_64BIT_HOST_ADDR paddr; + + pShadowSendBd = &pDevice->ShadowSendBd[Idx]; + for(FragCount = 0; ; ) + { + MM_MapTxDma(pDevice, pPacket, &paddr, &Len, FragCount); + /* Initialize the pointer to the send buffer fragment. */ + if (paddr.High != pShadowSendBd->HostAddr.High) + { + __raw_writel(paddr.High, &(pSendBd->HostAddr.High)); + pShadowSendBd->HostAddr.High = paddr.High; + } + __raw_writel(paddr.Low, &(pSendBd->HostAddr.Low)); + + /* Setup the control flags and send buffer size. */ + Value32 = (Len << 16) | pPacket->Flags; + + Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; + + FragCount++; + if (FragCount >= pPacket->u.Tx.FragCount) + { + Value32 |= SND_BD_FLAG_END; + if (Value32 != pShadowSendBd->u1.Len_Flags) + { + __raw_writel(Value32, &(pSendBd->u1.Len_Flags)); + pShadowSendBd->u1.Len_Flags = Value32; + } + if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { + __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag)); + } + break; + } + else + { + if (Value32 != pShadowSendBd->u1.Len_Flags) + { + __raw_writel(Value32, &(pSendBd->u1.Len_Flags)); + pShadowSendBd->u1.Len_Flags = Value32; + } + if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { + __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag)); + } + } + + pSendBd++; + pShadowSendBd++; + if (Idx == 0) + { + pSendBd = &pDevice->pSendBdVirt[0]; + pShadowSendBd = &pDevice->ShadowSendBd[0]; + } + } /* for */ + + /* Put the packet descriptor in the ActiveQ. */ + QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket); + + wmb(); + MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); } else { - for(FragCount = 0; ; ) - { - /* Initialize the pointer to the send buffer fragment. */ - MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount); + for(FragCount = 0; ; ) + { + /* Initialize the pointer to the send buffer fragment. */ + MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount); - pSendBd->u2.VlanTag = pPacket->VlanTag; + pSendBd->u2.VlanTag = pPacket->VlanTag; - /* Setup the control flags and send buffer size. */ - Value32 = (Len << 16) | pPacket->Flags; + /* Setup the control flags and send buffer size. */ + Value32 = (Len << 16) | pPacket->Flags; - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; + Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) - { - pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END; - break; - } - else - { - pSendBd->u1.Len_Flags = Value32; - } - pSendBd++; - if (Idx == 0) - { - pSendBd = &pDevice->pSendBdVirt[0]; - } - } /* for */ + FragCount++; + if (FragCount >= pPacket->u.Tx.FragCount) + { + pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END; + break; + } + else + { + pSendBd->u1.Len_Flags = Value32; + } + pSendBd++; + if (Idx == 0) + { + pSendBd = &pDevice->pSendBdVirt[0]; + } + } /* for */ - /* Put the packet descriptor in the ActiveQ. */ - QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket); + /* Put the packet descriptor in the ActiveQ. */ + QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket); - wmb(); - MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); + wmb(); + MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); } @@ -3176,121 +3168,121 @@ LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) while (1) { - /* Initalize the send buffer descriptors. */ - StartIdx = Idx = pDevice->SendProdIdx; - - if (pDevice->NicSendBd) - { - pTmpSendBd = pSendBd = &NicSendBdArr[0]; - } - else - { - pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx]; - } - - /* Next producer index. */ - for(FragCount = 0; ; ) - { - LM_UINT32 Value32, Len; - - /* Initialize the pointer to the send buffer fragment. */ - MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount); - - pSendBd->u2.VlanTag = pPacket->VlanTag; - - /* Setup the control flags and send buffer size. */ - Value32 = (Len << 16) | pPacket->Flags; - - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) - { - pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END; - break; - } - else - { - pSendBd->u1.Len_Flags = Value32; - } - pSendBd++; - if ((Idx == 0) && !pDevice->NicSendBd) - { - pSendBd = &pDevice->pSendBdVirt[0]; - } - } /* for */ - if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) - { - if (LM_Test4GBoundary(pDevice, pPacket, pTmpSendBd) == - LM_STATUS_SUCCESS) - { - if (MM_CoalesceTxBuffer(pDevice, pPacket) != LM_STATUS_SUCCESS) - { - QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket); - return LM_STATUS_FAILURE; - } - continue; - } - } - break; + /* Initalize the send buffer descriptors. */ + StartIdx = Idx = pDevice->SendProdIdx; + + if (pDevice->NicSendBd) + { + pTmpSendBd = pSendBd = &NicSendBdArr[0]; + } + else + { + pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx]; + } + + /* Next producer index. */ + for(FragCount = 0; ; ) + { + LM_UINT32 Value32, Len; + + /* Initialize the pointer to the send buffer fragment. */ + MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount); + + pSendBd->u2.VlanTag = pPacket->VlanTag; + + /* Setup the control flags and send buffer size. */ + Value32 = (Len << 16) | pPacket->Flags; + + Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; + + FragCount++; + if (FragCount >= pPacket->u.Tx.FragCount) + { + pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END; + break; + } + else + { + pSendBd->u1.Len_Flags = Value32; + } + pSendBd++; + if ((Idx == 0) && !pDevice->NicSendBd) + { + pSendBd = &pDevice->pSendBdVirt[0]; + } + } /* for */ + if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) + { + if (LM_Test4GBoundary(pDevice, pPacket, pTmpSendBd) == + LM_STATUS_SUCCESS) + { + if (MM_CoalesceTxBuffer(pDevice, pPacket) != LM_STATUS_SUCCESS) + { + QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket); + return LM_STATUS_FAILURE; + } + continue; + } + } + break; } /* Put the packet descriptor in the ActiveQ. */ QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket); if (pDevice->NicSendBd) { - pSendBd = &pDevice->pSendBdVirt[StartIdx]; - pShadowSendBd = &pDevice->ShadowSendBd[StartIdx]; - - while (StartIdx != Idx) - { - LM_UINT32 Value32; - - if ((Value32 = pTmpSendBd->HostAddr.High) != - pShadowSendBd->HostAddr.High) - { - __raw_writel(Value32, &(pSendBd->HostAddr.High)); - pShadowSendBd->HostAddr.High = Value32; - } - - __raw_writel(pTmpSendBd->HostAddr.Low, &(pSendBd->HostAddr.Low)); - - if ((Value32 = pTmpSendBd->u1.Len_Flags) != - pShadowSendBd->u1.Len_Flags) - { - __raw_writel(Value32, &(pSendBd->u1.Len_Flags)); - pShadowSendBd->u1.Len_Flags = Value32; - } - - if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) - { - __raw_writel(pTmpSendBd->u2.VlanTag, &(pSendBd->u2.VlanTag)); - } - - StartIdx = (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - if (StartIdx == 0) - pSendBd = &pDevice->pSendBdVirt[0]; - else - pSendBd++; - pTmpSendBd++; - } - wmb(); - MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); - - if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) - { - MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); - } + pSendBd = &pDevice->pSendBdVirt[StartIdx]; + pShadowSendBd = &pDevice->ShadowSendBd[StartIdx]; + + while (StartIdx != Idx) + { + LM_UINT32 Value32; + + if ((Value32 = pTmpSendBd->HostAddr.High) != + pShadowSendBd->HostAddr.High) + { + __raw_writel(Value32, &(pSendBd->HostAddr.High)); + pShadowSendBd->HostAddr.High = Value32; + } + + __raw_writel(pTmpSendBd->HostAddr.Low, &(pSendBd->HostAddr.Low)); + + if ((Value32 = pTmpSendBd->u1.Len_Flags) != + pShadowSendBd->u1.Len_Flags) + { + __raw_writel(Value32, &(pSendBd->u1.Len_Flags)); + pShadowSendBd->u1.Len_Flags = Value32; + } + + if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) + { + __raw_writel(pTmpSendBd->u2.VlanTag, &(pSendBd->u2.VlanTag)); + } + + StartIdx = (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; + if (StartIdx == 0) + pSendBd = &pDevice->pSendBdVirt[0]; + else + pSendBd++; + pTmpSendBd++; + } + wmb(); + MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); + + if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) + { + MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); + } } else { - wmb(); - MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); + wmb(); + MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); - if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) - { - MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); - } + if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) + { + MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); + } } /* Update the SendBdLeft count. */ @@ -3312,27 +3304,27 @@ LM_Test4GBoundary(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket, Idx = pDevice->SendProdIdx; for(FragCount = 0; ; ) { - Len = pSendBd->u1.Len_Flags >> 16; - if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) && - (pSendBd->HostAddr.High == 0) && - ((Base + 8 + Len) < Base)) - { - return LM_STATUS_SUCCESS; - } - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) - { - break; - } - pSendBd++; - if (!pDevice->NicSendBd) - { - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - if (Idx == 0) - { - pSendBd = &pDevice->pSendBdVirt[0]; - } - } + Len = pSendBd->u1.Len_Flags >> 16; + if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) && + (pSendBd->HostAddr.High == 0) && + ((Base + 8 + Len) < Base)) + { + return LM_STATUS_SUCCESS; + } + FragCount++; + if (FragCount >= pPacket->u.Tx.FragCount) + { + break; + } + pSendBd++; + if (!pDevice->NicSendBd) + { + Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; + if (Idx == 0) + { + pSendBd = &pDevice->pSendBdVirt[0]; + } + } } return LM_STATUS_FAILURE; } @@ -3354,26 +3346,25 @@ unsigned long BufferSize) { for(j = 0; j < BufferSize; j++) { - Reg ^= pBuffer[j]; + Reg ^= pBuffer[j]; - for(k = 0; k < 8; k++) - { - Tmp = Reg & 0x01; + for(k = 0; k < 8; k++) + { + Tmp = Reg & 0x01; - Reg >>= 1; + Reg >>= 1; - if(Tmp) - { - Reg ^= 0xedb88320; - } - } + if(Tmp) + { + Reg ^= 0xedb88320; + } + } } return ~Reg; } /* ComputeCrc32 */ - /******************************************************************************/ /* Description: */ /* This routine sets the receive control register according to ReceiveMask */ @@ -3395,42 +3386,42 @@ LM_UINT32 Mask) { if(Mask & LM_ACCEPT_UNICAST) { - Mask &= ~LM_ACCEPT_UNICAST; + Mask &= ~LM_ACCEPT_UNICAST; } if(Mask & LM_ACCEPT_MULTICAST) { - Mask &= ~LM_ACCEPT_MULTICAST; + Mask &= ~LM_ACCEPT_MULTICAST; } if(Mask & LM_ACCEPT_ALL_MULTICAST) { - Mask &= ~LM_ACCEPT_ALL_MULTICAST; + Mask &= ~LM_ACCEPT_ALL_MULTICAST; } if(Mask & LM_ACCEPT_BROADCAST) { - Mask &= ~LM_ACCEPT_BROADCAST; + Mask &= ~LM_ACCEPT_BROADCAST; } RxMode &= ~RX_MODE_PROMISCUOUS_MODE; if(Mask & LM_PROMISCUOUS_MODE) { - RxMode |= RX_MODE_PROMISCUOUS_MODE; - Mask &= ~LM_PROMISCUOUS_MODE; + RxMode |= RX_MODE_PROMISCUOUS_MODE; + Mask &= ~LM_PROMISCUOUS_MODE; } RxMode &= ~(RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED); if(Mask & LM_ACCEPT_ERROR_PACKET) { - RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED; - Mask &= ~LM_ACCEPT_ERROR_PACKET; + RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED; + Mask &= ~LM_ACCEPT_ERROR_PACKET; } /* Make sure all the bits are valid before committing changes. */ if(Mask) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } /* Commit the new filter. */ @@ -3442,90 +3433,89 @@ LM_UINT32 Mask) { /* Set up the MC hash table. */ if(ReceiveMask & LM_ACCEPT_ALL_MULTICAST) { - for(k = 0; k < 4; k++) - { - REG_WR(pDevice, MacCtrl.HashReg[k], 0xffffffff); - } + for(k = 0; k < 4; k++) + { + REG_WR(pDevice, MacCtrl.HashReg[k], 0xffffffff); + } } else if(ReceiveMask & LM_ACCEPT_MULTICAST) { - LM_UINT32 HashReg[4]; + LM_UINT32 HashReg[4]; - HashReg[0] = 0; HashReg[1] = 0; HashReg[2] = 0; HashReg[3] = 0; - for(j = 0; j < pDevice->McEntryCount; j++) - { - LM_UINT32 RegIndex; - LM_UINT32 Bitpos; - LM_UINT32 Crc32; + HashReg[0] = 0; HashReg[1] = 0; HashReg[2] = 0; HashReg[3] = 0; + for(j = 0; j < pDevice->McEntryCount; j++) + { + LM_UINT32 RegIndex; + LM_UINT32 Bitpos; + LM_UINT32 Crc32; - Crc32 = ComputeCrc32(pDevice->McTable[j], ETHERNET_ADDRESS_SIZE); + Crc32 = ComputeCrc32(pDevice->McTable[j], ETHERNET_ADDRESS_SIZE); - /* The most significant 7 bits of the CRC32 (no inversion), */ - /* are used to index into one of the possible 128 bit positions. */ - Bitpos = ~Crc32 & 0x7f; + /* The most significant 7 bits of the CRC32 (no inversion), */ + /* are used to index into one of the possible 128 bit positions. */ + Bitpos = ~Crc32 & 0x7f; - /* Hash register index. */ - RegIndex = (Bitpos & 0x60) >> 5; + /* Hash register index. */ + RegIndex = (Bitpos & 0x60) >> 5; - /* Bit to turn on within a hash register. */ - Bitpos &= 0x1f; + /* Bit to turn on within a hash register. */ + Bitpos &= 0x1f; - /* Enable the multicast bit. */ - HashReg[RegIndex] |= (1 << Bitpos); - } + /* Enable the multicast bit. */ + HashReg[RegIndex] |= (1 << Bitpos); + } - /* REV_AX has problem with multicast filtering where it uses both */ - /* DA and SA to perform hashing. */ - for(k = 0; k < 4; k++) - { - REG_WR(pDevice, MacCtrl.HashReg[k], HashReg[k]); - } + /* REV_AX has problem with multicast filtering where it uses both */ + /* DA and SA to perform hashing. */ + for(k = 0; k < 4; k++) + { + REG_WR(pDevice, MacCtrl.HashReg[k], HashReg[k]); + } } else { - /* Reject all multicast frames. */ - for(j = 0; j < 4; j++) - { - REG_WR(pDevice, MacCtrl.HashReg[j], 0); - } + /* Reject all multicast frames. */ + for(j = 0; j < 4; j++) + { + REG_WR(pDevice, MacCtrl.HashReg[j], 0); + } } /* By default, Tigon3 will accept broadcast frames. We need to setup */ if(ReceiveMask & LM_ACCEPT_BROADCAST) { - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK); - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK); - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK); - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule, + REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value, + REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule, + REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value, + REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK); } else { - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE1_RULE); - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE1_VALUE); - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE2_RULE); - REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE2_VALUE); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule, + REJECT_BROADCAST_RULE1_RULE); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value, + REJECT_BROADCAST_RULE1_VALUE); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule, + REJECT_BROADCAST_RULE2_RULE); + REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value, + REJECT_BROADCAST_RULE2_VALUE); } /* disable the rest of the rules. */ for(j = RCV_LAST_RULE_IDX; j < 16; j++) { - REG_WR(pDevice, MacCtrl.RcvRules[j].Rule, 0); - REG_WR(pDevice, MacCtrl.RcvRules[j].Value, 0); + REG_WR(pDevice, MacCtrl.RcvRules[j].Rule, 0); + REG_WR(pDevice, MacCtrl.RcvRules[j].Value, 0); } return LM_STATUS_SUCCESS; } /* LM_SetReceiveMask */ - /******************************************************************************/ /* Description: */ /* Disable the interrupt and put the transmitter and receiver engines in */ @@ -3584,15 +3574,15 @@ PLM_DEVICE_BLOCK pDevice) while(pPacket) { - pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED; - pDevice->TxCounters.TxPacketAbortedCnt++; + pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED; + pDevice->TxCounters.TxPacketAbortedCnt++; - atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); + atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); - QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket); + QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket); - pPacket = (PLM_PACKET) - QQ_PopHead(&pDevice->TxPacketActiveQ.Container); + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->TxPacketActiveQ.Container); } /* Cleanup the receive return rings. */ @@ -3602,38 +3592,38 @@ PLM_DEVICE_BLOCK pDevice) /* Doing so may cause system crash. */ if(!pDevice->ShuttingDown) { - /* Indicate packets to the protocol. */ - MM_IndicateTxPackets(pDevice); + /* Indicate packets to the protocol. */ + MM_IndicateTxPackets(pDevice); - /* Indicate received packets to the protocols. */ - MM_IndicateRxPackets(pDevice); + /* Indicate received packets to the protocols. */ + MM_IndicateRxPackets(pDevice); } else { - /* Move the receive packet descriptors in the ReceivedQ to the */ - /* free queue. */ - for(; ;) - { - pPacket = (PLM_PACKET) QQ_PopHead( - &pDevice->RxPacketReceivedQ.Container); - if(pPacket == NULL) - { - break; - } - QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); - } + /* Move the receive packet descriptors in the ReceivedQ to the */ + /* free queue. */ + for(; ;) + { + pPacket = (PLM_PACKET) QQ_PopHead( + &pDevice->RxPacketReceivedQ.Container); + if(pPacket == NULL) + { + break; + } + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + } } /* Clean up the Std Receive Producer ring. */ Idx = pDevice->pStatusBlkVirt->RcvStdConIdx; while(Idx != pDevice->RxStdProdIdx) { - pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) + - MM_UINT_PTR(pDevice->pRxStdBdVirt[Idx].Opaque)); + pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) + + MM_UINT_PTR(pDevice->pRxStdBdVirt[Idx].Opaque)); - QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); - Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK; + Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK; } /* while */ /* Reinitialize our copy of the indices. */ @@ -3644,12 +3634,12 @@ PLM_DEVICE_BLOCK pDevice) Idx = pDevice->pStatusBlkVirt->RcvJumboConIdx; while(Idx != pDevice->RxJumboProdIdx) { - pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) + - MM_UINT_PTR(pDevice->pRxJumboBdVirt[Idx].Opaque)); + pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) + + MM_UINT_PTR(pDevice->pRxJumboBdVirt[Idx].Opaque)); - QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); - Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK; + Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK; } /* while */ /* Reinitialize our copy of the indices. */ @@ -3668,7 +3658,6 @@ PLM_DEVICE_BLOCK pDevice) } /* LM_Abort */ - /******************************************************************************/ /* Description: */ /* Disable the interrupt and put the transmitter and receiver engines in */ @@ -3692,22 +3681,22 @@ PLM_DEVICE_BLOCK pDevice) { /* Make sure all the packets have been accounted for. */ for(EntryCnt = 0; EntryCnt < pDevice->RxPacketDescCnt; EntryCnt++) { - pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container); - if (pPacket == 0) - break; + pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container); + if (pPacket == 0) + break; - MM_FreeRxBuffer(pDevice, pPacket); + MM_FreeRxBuffer(pDevice, pPacket); - QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); } LM_ResetChip(pDevice); /* Restore PCI configuration registers. */ MM_WriteConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG, - pDevice->SavedCacheLineReg); + pDevice->SavedCacheLineReg); LM_RegWrInd(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, - (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId); + (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId); /* Reprogram the MAC address. */ LM_SetMacAddress(pDevice, pDevice->NodeAddress); @@ -3725,20 +3714,20 @@ LM_ResetChip(PLM_DEVICE_BLOCK pDevice) /* Wait for access to the nvram interface before resetting. This is */ /* a workaround to prevent EEPROM corruption. */ if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 && - T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) + T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) { - /* Request access to the flash interface. */ - REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1); + /* Request access to the flash interface. */ + REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1); - for(j = 0; j < 100000; j++) - { - Value32 = REG_RD(pDevice, Nvram.SwArb); - if(Value32 & SW_ARB_GNT1) - { - break; - } - MM_Wait(10); - } + for(j = 0; j < 100000; j++) + { + Value32 = REG_RD(pDevice, Nvram.SwArb); + if(Value32 & SW_ARB_GNT1) + { + break; + } + MM_Wait(10); + } } /* Global reset. */ @@ -3747,22 +3736,22 @@ LM_ResetChip(PLM_DEVICE_BLOCK pDevice) /* make sure we re-enable indirect accesses */ MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, - pDevice->MiscHostCtrl); + pDevice->MiscHostCtrl); /* Set MAX PCI retry to zero. */ Value32 = T3_PCI_STATE_PCI_ROM_ENABLE | T3_PCI_STATE_PCI_ROM_RETRY_ENABLE; if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) - { - Value32 |= T3_PCI_STATE_RETRY_SAME_DMA; - } + if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) + { + Value32 |= T3_PCI_STATE_RETRY_SAME_DMA; + } } MM_WriteConfig32(pDevice, T3_PCI_STATE_REG, Value32); /* Restore PCI command register. */ MM_WriteConfig32(pDevice, PCI_COMMAND_REG, - pDevice->PciCommandStatusWords); + pDevice->PciCommandStatusWords); /* Disable PCI-X relaxed ordering bit. */ MM_ReadConfig32(pDevice, PCIX_CAP_REG, &Value32); @@ -3773,15 +3762,15 @@ LM_ResetChip(PLM_DEVICE_BLOCK pDevice) REG_WR(pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE); #ifdef BIG_ENDIAN_PCI /* This from jfd */ - Value32 = GRC_MODE_WORD_SWAP_DATA| - GRC_MODE_WORD_SWAP_NON_FRAME_DATA; + Value32 = GRC_MODE_WORD_SWAP_DATA| + GRC_MODE_WORD_SWAP_NON_FRAME_DATA; #else #ifdef BIG_ENDIAN_HOST /* Reconfigure the mode register. */ Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_BYTE_SWAP_DATA | - GRC_MODE_WORD_SWAP_DATA; + GRC_MODE_WORD_SWAP_NON_FRAME_DATA | + GRC_MODE_BYTE_SWAP_DATA | + GRC_MODE_WORD_SWAP_DATA; #else /* Reconfigure the mode register. */ Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA; @@ -3793,23 +3782,23 @@ LM_ResetChip(PLM_DEVICE_BLOCK pDevice) MEM_WR_OFFSET(pDevice, 0x0b50, T3_MAGIC_NUM); if(pDevice->EnableTbi) { - pDevice->MacMode = MAC_MODE_PORT_MODE_TBI; - REG_WR(pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI); + pDevice->MacMode = MAC_MODE_PORT_MODE_TBI; + REG_WR(pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI); } else { - REG_WR(pDevice, MacCtrl.Mode, 0); + REG_WR(pDevice, MacCtrl.Mode, 0); } /* Wait for the firmware to finish initialization. */ for(j = 0; j < 100000; j++) { - MM_Wait(10); + MM_Wait(10); - Value32 = MEM_RD_OFFSET(pDevice, 0x0b50); - if(Value32 == ~T3_MAGIC_NUM) - { - break; - } + Value32 = MEM_RD_OFFSET(pDevice, 0x0b50); + if(Value32 == ~T3_MAGIC_NUM) + { + break; + } } return LM_STATUS_SUCCESS; } @@ -3837,25 +3826,25 @@ PLM_DEVICE_BLOCK pDevice) { /* descriptors that are between SwConIdx and HwConIdx. */ while(SwConIdx != HwConIdx) { - /* Get the packet that was sent from the TxPacketActiveQ. */ - pPacket = (PLM_PACKET) QQ_PopHead( - &pDevice->TxPacketActiveQ.Container); + /* Get the packet that was sent from the TxPacketActiveQ. */ + pPacket = (PLM_PACKET) QQ_PopHead( + &pDevice->TxPacketActiveQ.Container); - /* Set the return status. */ - pPacket->PacketStatus = LM_STATUS_SUCCESS; + /* Set the return status. */ + pPacket->PacketStatus = LM_STATUS_SUCCESS; - /* Put the packet in the TxPacketXmittedQ for indication later. */ - QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket); + /* Put the packet in the TxPacketXmittedQ for indication later. */ + QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket); - /* Move to the next packet's BD. */ - SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) & - T3_SEND_RCB_ENTRY_COUNT_MASK; + /* Move to the next packet's BD. */ + SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) & + T3_SEND_RCB_ENTRY_COUNT_MASK; - /* Update the number of unused BDs. */ - atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); + /* Update the number of unused BDs. */ + atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); - /* Get the new updated HwConIdx. */ - HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx; + /* Get the new updated HwConIdx. */ + HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx; } /* while */ /* Save the new SwConIdx. */ @@ -3864,7 +3853,6 @@ PLM_DEVICE_BLOCK pDevice) { } /* LM_ServiceTxInterrupt */ - /******************************************************************************/ /* Description: */ /* */ @@ -3884,89 +3872,89 @@ PLM_DEVICE_BLOCK pDevice) { SwRcvRetConIdx = pDevice->RcvRetConIdx; while(SwRcvRetConIdx != HwRcvRetProdIdx) { - pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx]; - - /* Get the received packet descriptor. */ - pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) + - MM_UINT_PTR(pRcvBd->Opaque)); - - /* Check the error flag. */ - if(pRcvBd->ErrorFlag && - pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) - { - pPacket->PacketStatus = LM_STATUS_FAILURE; - - pDevice->RxCounters.RxPacketErrCnt++; - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC) - { - pDevice->RxCounters.RxErrCrcCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT) - { - pDevice->RxCounters.RxErrCollCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT) - { - pDevice->RxCounters.RxErrLinkLostCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR) - { - pDevice->RxCounters.RxErrPhyDecodeCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) - { - pDevice->RxCounters.RxErrOddNibbleCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT) - { - pDevice->RxCounters.RxErrMacAbortCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64) - { - pDevice->RxCounters.RxErrShortPacketCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES) - { - pDevice->RxCounters.RxErrNoResourceCnt++; - } - - if(pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD) - { - pDevice->RxCounters.RxErrLargePacketCnt++; - } - } - else - { - pPacket->PacketStatus = LM_STATUS_SUCCESS; - pPacket->PacketSize = pRcvBd->Len - 4; - - pPacket->Flags = pRcvBd->Flags; - if(pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG) - { - pPacket->VlanTag = pRcvBd->VlanTag; - } - - pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum; - } - - /* Put the packet descriptor containing the received packet */ - /* buffer in the RxPacketReceivedQ for indication later. */ - QQ_PushTail(&pDevice->RxPacketReceivedQ.Container, pPacket); - - /* Go to the next buffer descriptor. */ - SwRcvRetConIdx = (SwRcvRetConIdx + 1) & - T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK; - - /* Get the updated HwRcvRetProdIdx. */ - HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx; + pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx]; + + /* Get the received packet descriptor. */ + pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) + + MM_UINT_PTR(pRcvBd->Opaque)); + + /* Check the error flag. */ + if(pRcvBd->ErrorFlag && + pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) + { + pPacket->PacketStatus = LM_STATUS_FAILURE; + + pDevice->RxCounters.RxPacketErrCnt++; + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC) + { + pDevice->RxCounters.RxErrCrcCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT) + { + pDevice->RxCounters.RxErrCollCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT) + { + pDevice->RxCounters.RxErrLinkLostCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR) + { + pDevice->RxCounters.RxErrPhyDecodeCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) + { + pDevice->RxCounters.RxErrOddNibbleCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT) + { + pDevice->RxCounters.RxErrMacAbortCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64) + { + pDevice->RxCounters.RxErrShortPacketCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES) + { + pDevice->RxCounters.RxErrNoResourceCnt++; + } + + if(pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD) + { + pDevice->RxCounters.RxErrLargePacketCnt++; + } + } + else + { + pPacket->PacketStatus = LM_STATUS_SUCCESS; + pPacket->PacketSize = pRcvBd->Len - 4; + + pPacket->Flags = pRcvBd->Flags; + if(pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG) + { + pPacket->VlanTag = pRcvBd->VlanTag; + } + + pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum; + } + + /* Put the packet descriptor containing the received packet */ + /* buffer in the RxPacketReceivedQ for indication later. */ + QQ_PushTail(&pDevice->RxPacketReceivedQ.Container, pPacket); + + /* Go to the next buffer descriptor. */ + SwRcvRetConIdx = (SwRcvRetConIdx + 1) & + T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK; + + /* Get the updated HwRcvRetProdIdx. */ + HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx; } /* while */ pDevice->RcvRetConIdx = SwRcvRetConIdx; @@ -3976,7 +3964,6 @@ PLM_DEVICE_BLOCK pDevice) { } /* LM_ServiceRxInterrupt */ - /******************************************************************************/ /* Description: */ /* This is the interrupt event handler routine. It acknowledges all */ @@ -3995,37 +3982,37 @@ LM_ServiceInterrupts( /* Setup the phy chip whenever the link status changes. */ if(pDevice->LinkChngMode == T3_LINK_CHNG_MODE_USE_STATUS_REG) { - Value32 = REG_RD(pDevice, MacCtrl.Status); - if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) - { - if (Value32 & MAC_STATUS_MI_INTERRUPT) - { - ServicePhyInt = TRUE; - } - } - else if(Value32 & MAC_STATUS_LINK_STATE_CHANGED) - { - ServicePhyInt = TRUE; - } + Value32 = REG_RD(pDevice, MacCtrl.Status); + if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) + { + if (Value32 & MAC_STATUS_MI_INTERRUPT) + { + ServicePhyInt = TRUE; + } + } + else if(Value32 & MAC_STATUS_LINK_STATE_CHANGED) + { + ServicePhyInt = TRUE; + } } else { - if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_LINK_CHANGED_STATUS) - { - pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED | - (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS); - ServicePhyInt = TRUE; - } + if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_LINK_CHANGED_STATUS) + { + pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED | + (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS); + ServicePhyInt = TRUE; + } } #if INCLUDE_TBI_SUPPORT if (pDevice->IgnoreTbiLinkChange == TRUE) { - ServicePhyInt = FALSE; + ServicePhyInt = FALSE; } #endif if (ServicePhyInt == TRUE) { - LM_SetupPhy(pDevice); + LM_SetupPhy(pDevice); } /* Service receive and transmit interrupts. */ @@ -4035,22 +4022,21 @@ LM_ServiceInterrupts( /* No spinlock for this queue since this routine is serialized. */ if(!QQ_Empty(&pDevice->RxPacketReceivedQ.Container)) { - /* Indicate receive packets. */ - MM_IndicateRxPackets(pDevice); + /* Indicate receive packets. */ + MM_IndicateRxPackets(pDevice); /* LM_QueueRxPackets(pDevice); */ } /* No spinlock for this queue since this routine is serialized. */ if(!QQ_Empty(&pDevice->TxPacketXmittedQ.Container)) { - MM_IndicateTxPackets(pDevice); + MM_IndicateTxPackets(pDevice); } return LM_STATUS_SUCCESS; } /* LM_ServiceInterrupts */ - /******************************************************************************/ /* Description: */ /* */ @@ -4066,20 +4052,20 @@ PLM_UINT8 pMcAddress) { pEntry = pDevice->McTable[0]; for(j = 0; j < pDevice->McEntryCount; j++) { - if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress)) - { - /* Found a match, increment the instance count. */ - pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1; + if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress)) + { + /* Found a match, increment the instance count. */ + pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1; - return LM_STATUS_SUCCESS; - } + return LM_STATUS_SUCCESS; + } - pEntry += LM_MC_ENTRY_SIZE; + pEntry += LM_MC_ENTRY_SIZE; } if(pDevice->McEntryCount >= LM_MAX_MC_TABLE_SIZE) { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } pEntry = pDevice->McTable[pDevice->McEntryCount]; @@ -4095,7 +4081,6 @@ PLM_UINT8 pMcAddress) { } /* LM_MulticastAdd */ - /******************************************************************************/ /* Description: */ /* */ @@ -4111,43 +4096,42 @@ PLM_UINT8 pMcAddress) { pEntry = pDevice->McTable[0]; for(j = 0; j < pDevice->McEntryCount; j++) { - if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress)) - { - /* Found a match, decrement the instance count. */ - pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1; - - /* No more instance left, remove the address from the table. */ - /* Move the last entry in the table to the delete slot. */ - if(pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 && - pDevice->McEntryCount > 1) - { - - COPY_ETH_ADDRESS( - pDevice->McTable[pDevice->McEntryCount-1], pEntry); - pEntry[LM_MC_INSTANCE_COUNT_INDEX] = - pDevice->McTable[pDevice->McEntryCount-1] - [LM_MC_INSTANCE_COUNT_INDEX]; - } - pDevice->McEntryCount--; - - /* Update the receive mask if the table is empty. */ - if(pDevice->McEntryCount == 0) - { - LM_SetReceiveMask(pDevice, - pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST); - } - - return LM_STATUS_SUCCESS; - } + if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress)) + { + /* Found a match, decrement the instance count. */ + pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1; + + /* No more instance left, remove the address from the table. */ + /* Move the last entry in the table to the delete slot. */ + if(pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 && + pDevice->McEntryCount > 1) + { + + COPY_ETH_ADDRESS( + pDevice->McTable[pDevice->McEntryCount-1], pEntry); + pEntry[LM_MC_INSTANCE_COUNT_INDEX] = + pDevice->McTable[pDevice->McEntryCount-1] + [LM_MC_INSTANCE_COUNT_INDEX]; + } + pDevice->McEntryCount--; + + /* Update the receive mask if the table is empty. */ + if(pDevice->McEntryCount == 0) + { + LM_SetReceiveMask(pDevice, + pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST); + } + + return LM_STATUS_SUCCESS; + } - pEntry += LM_MC_ENTRY_SIZE; + pEntry += LM_MC_ENTRY_SIZE; } return LM_STATUS_FAILURE; } /* LM_MulticastDel */ - /******************************************************************************/ /* Description: */ /* */ @@ -4164,7 +4148,6 @@ PLM_DEVICE_BLOCK pDevice) { } /* LM_MulticastClear */ - /******************************************************************************/ /* Description: */ /* */ @@ -4179,11 +4162,11 @@ LM_SetMacAddress( for(j = 0; j < 4; j++) { - REG_WR(pDevice, MacCtrl.MacAddr[j].High, - (pMacAddress[0] << 8) | pMacAddress[1]); - REG_WR(pDevice, MacCtrl.MacAddr[j].Low, - (pMacAddress[2] << 24) | (pMacAddress[3] << 16) | - (pMacAddress[4] << 8) | pMacAddress[5]); + REG_WR(pDevice, MacCtrl.MacAddr[j].High, + (pMacAddress[0] << 8) | pMacAddress[1]); + REG_WR(pDevice, MacCtrl.MacAddr[j].Low, + (pMacAddress[2] << 24) | (pMacAddress[3] << 16) | + (pMacAddress[4] << 8) | pMacAddress[5]); } return LM_STATUS_SUCCESS; @@ -4210,78 +4193,78 @@ PLM_DUPLEX_MODE pDuplexMode) { /* determine media type */ switch(RequestedMediaType) { - case LM_REQUESTED_MEDIA_TYPE_BNC: - *pMediaType = LM_MEDIA_TYPE_BNC; - *pLineSpeed = LM_LINE_SPEED_10MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO: - *pMediaType = LM_MEDIA_TYPE_UTP; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_10MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_10MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - default: - break; + case LM_REQUESTED_MEDIA_TYPE_BNC: + *pMediaType = LM_MEDIA_TYPE_BNC; + *pLineSpeed = LM_LINE_SPEED_10MBPS; + *pDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO: + *pMediaType = LM_MEDIA_TYPE_UTP; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS: + *pMediaType = LM_MEDIA_TYPE_UTP; + *pLineSpeed = LM_LINE_SPEED_10MBPS; + *pDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX: + *pMediaType = LM_MEDIA_TYPE_UTP; + *pLineSpeed = LM_LINE_SPEED_10MBPS; + *pDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS: + *pMediaType = LM_MEDIA_TYPE_UTP; + *pLineSpeed = LM_LINE_SPEED_100MBPS; + *pDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX: + *pMediaType = LM_MEDIA_TYPE_UTP; + *pLineSpeed = LM_LINE_SPEED_100MBPS; + *pDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS: + *pMediaType = LM_MEDIA_TYPE_UTP; + *pLineSpeed = LM_LINE_SPEED_1000MBPS; + *pDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX: + *pMediaType = LM_MEDIA_TYPE_UTP; + *pLineSpeed = LM_LINE_SPEED_1000MBPS; + *pDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS: + *pMediaType = LM_MEDIA_TYPE_FIBER; + *pLineSpeed = LM_LINE_SPEED_100MBPS; + *pDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX: + *pMediaType = LM_MEDIA_TYPE_FIBER; + *pLineSpeed = LM_LINE_SPEED_100MBPS; + *pDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS: + *pMediaType = LM_MEDIA_TYPE_FIBER; + *pLineSpeed = LM_LINE_SPEED_1000MBPS; + *pDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX: + *pMediaType = LM_MEDIA_TYPE_FIBER; + *pLineSpeed = LM_LINE_SPEED_1000MBPS; + *pDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + default: + break; } /* switch */ return LM_STATUS_SUCCESS; @@ -4309,92 +4292,92 @@ PLM_DEVICE_BLOCK pDevice) #endif if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) { - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - if(!pDevice->InitDone) - { - Value32 = 0; - } + if(!pDevice->InitDone) + { + Value32 = 0; + } - if(!(Value32 & PHY_STATUS_LINK_PASS)) - { - LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20); + if(!(Value32 & PHY_STATUS_LINK_PASS)) + { + LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - for(j = 0; j < 1000; j++) - { - MM_Wait(10); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + for(j = 0; j < 1000; j++) + { + MM_Wait(10); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - if(Value32 & PHY_STATUS_LINK_PASS) - { - MM_Wait(40); - break; - } - } + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + if(Value32 & PHY_STATUS_LINK_PASS) + { + MM_Wait(40); + break; + } + } - if((pDevice->PhyId & PHY_ID_REV_MASK) == PHY_BCM5401_B0_REV) - { - if(!(Value32 & PHY_STATUS_LINK_PASS) && - (pDevice->OldLineSpeed == LM_LINE_SPEED_1000MBPS)) - { - LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET); - for(j = 0; j < 100; j++) - { - MM_Wait(10); + if((pDevice->PhyId & PHY_ID_REV_MASK) == PHY_BCM5401_B0_REV) + { + if(!(Value32 & PHY_STATUS_LINK_PASS) && + (pDevice->OldLineSpeed == LM_LINE_SPEED_1000MBPS)) + { + LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET); + for(j = 0; j < 100; j++) + { + MM_Wait(10); - LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); - if(!(Value32 & PHY_CTRL_PHY_RESET)) - { - MM_Wait(40); - break; - } - } + LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); + if(!(Value32 & PHY_CTRL_PHY_RESET)) + { + MM_Wait(40); + break; + } + } - LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20); + LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232); + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232); - LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); - LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20); - } - } - } + LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); + LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20); + } + } + } } else if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) + pDevice->ChipRevId == T3_CHIP_ID_5701_B0) { - /* Bug: 5701 A0, B0 TX CRC workaround. */ - LM_WritePhy(pDevice, 0x15, 0x0a75); - LM_WritePhy(pDevice, 0x1c, 0x8c68); - LM_WritePhy(pDevice, 0x1c, 0x8d68); - LM_WritePhy(pDevice, 0x1c, 0x8c68); + /* Bug: 5701 A0, B0 TX CRC workaround. */ + LM_WritePhy(pDevice, 0x15, 0x0a75); + LM_WritePhy(pDevice, 0x1c, 0x8c68); + LM_WritePhy(pDevice, 0x1c, 0x8d68); + LM_WritePhy(pDevice, 0x1c, 0x8c68); } /* Acknowledge interrupts. */ @@ -4404,22 +4387,22 @@ PLM_DEVICE_BLOCK pDevice) /* Configure the interrupt mask. */ if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) { - LM_WritePhy(pDevice, BCM540X_INT_MASK_REG, ~BCM540X_INT_LINK_CHANGE); + LM_WritePhy(pDevice, BCM540X_INT_MASK_REG, ~BCM540X_INT_LINK_CHANGE); } /* Configure PHY led mode. */ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 || - (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)) + (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)) { - if(pDevice->LedMode == LED_MODE_THREE_LINK) - { - LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, - BCM540X_EXT_CTRL_LINK3_LED_MODE); - } - else - { - LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, 0); - } + if(pDevice->LedMode == LED_MODE_THREE_LINK) + { + LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, + BCM540X_EXT_CTRL_LINK3_LED_MODE); + } + else + { + LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, 0); + } } CurrentLinkStatus = LM_STATUS_LINK_DOWN; @@ -4427,148 +4410,148 @@ PLM_DEVICE_BLOCK pDevice) /* Get current link and duplex mode. */ for(j = 0; j < 100; j++) { - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - if(Value32 & PHY_STATUS_LINK_PASS) - { - break; - } - MM_Wait(40); + if(Value32 & PHY_STATUS_LINK_PASS) + { + break; + } + MM_Wait(40); } if(Value32 & PHY_STATUS_LINK_PASS) { - /* Determine the current line and duplex settings. */ - LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32); - for(j = 0; j < 2000; j++) - { - MM_Wait(10); - - LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32); - if(Value32) - { - break; - } - } - - switch(Value32 & BCM540X_AUX_SPEED_MASK) - { - case BCM540X_AUX_10BASET_HD: - CurrentLineSpeed = LM_LINE_SPEED_10MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case BCM540X_AUX_10BASET_FD: - CurrentLineSpeed = LM_LINE_SPEED_10MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case BCM540X_AUX_100BASETX_HD: - CurrentLineSpeed = LM_LINE_SPEED_100MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case BCM540X_AUX_100BASETX_FD: - CurrentLineSpeed = LM_LINE_SPEED_100MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case BCM540X_AUX_100BASET_HD: - CurrentLineSpeed = LM_LINE_SPEED_1000MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case BCM540X_AUX_100BASET_FD: - CurrentLineSpeed = LM_LINE_SPEED_1000MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - default: - - CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN; - CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN; - break; - } - - /* Make sure we are in auto-neg mode. */ - for (j = 0; j < 200; j++) - { - LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); - if(Value32 && Value32 != 0x7fff) - { - break; - } - - if(Value32 == 0 && pDevice->RequestedMediaType == - LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS) - { - break; - } - - MM_Wait(10); - } - - /* Use the current line settings for "auto" mode. */ - if(pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) - { - if(Value32 & PHY_CTRL_AUTO_NEG_ENABLE) - { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - - /* We may be exiting low power mode and the link is in */ - /* 10mb. In this case, we need to restart autoneg. */ - LM_ReadPhy(pDevice, BCM540X_1000BASET_CTRL_REG, &Value32); - pDevice->advertising1000 = Value32; - /* 5702FE supports 10/100Mb only. */ - if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5703 || - pDevice->BondId != GRC_MISC_BD_ID_5702FE) - { - if(!(Value32 & (BCM540X_AN_AD_1000BASET_HALF | - BCM540X_AN_AD_1000BASET_FULL))) - { - CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; - } - } - } - else - { - CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; - } - } - else - { - /* Force line settings. */ - /* Use the current setting if it matches the user's requested */ - /* setting. */ - LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); - if((pDevice->LineSpeed == CurrentLineSpeed) && - (pDevice->DuplexMode == CurrentDuplexMode)) - { - if ((pDevice->DisableAutoNeg && - !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) || - (!pDevice->DisableAutoNeg && - (Value32 & PHY_CTRL_AUTO_NEG_ENABLE))) - { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } - else - { - CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; - } - } - else - { - CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; - } - } - - /* Save line settings. */ - pDevice->LineSpeed = CurrentLineSpeed; - pDevice->DuplexMode = CurrentDuplexMode; - pDevice->MediaType = LM_MEDIA_TYPE_UTP; + /* Determine the current line and duplex settings. */ + LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32); + for(j = 0; j < 2000; j++) + { + MM_Wait(10); + + LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32); + if(Value32) + { + break; + } + } + + switch(Value32 & BCM540X_AUX_SPEED_MASK) + { + case BCM540X_AUX_10BASET_HD: + CurrentLineSpeed = LM_LINE_SPEED_10MBPS; + CurrentDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case BCM540X_AUX_10BASET_FD: + CurrentLineSpeed = LM_LINE_SPEED_10MBPS; + CurrentDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + case BCM540X_AUX_100BASETX_HD: + CurrentLineSpeed = LM_LINE_SPEED_100MBPS; + CurrentDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case BCM540X_AUX_100BASETX_FD: + CurrentLineSpeed = LM_LINE_SPEED_100MBPS; + CurrentDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + case BCM540X_AUX_100BASET_HD: + CurrentLineSpeed = LM_LINE_SPEED_1000MBPS; + CurrentDuplexMode = LM_DUPLEX_MODE_HALF; + break; + + case BCM540X_AUX_100BASET_FD: + CurrentLineSpeed = LM_LINE_SPEED_1000MBPS; + CurrentDuplexMode = LM_DUPLEX_MODE_FULL; + break; + + default: + + CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN; + CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN; + break; + } + + /* Make sure we are in auto-neg mode. */ + for (j = 0; j < 200; j++) + { + LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); + if(Value32 && Value32 != 0x7fff) + { + break; + } + + if(Value32 == 0 && pDevice->RequestedMediaType == + LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS) + { + break; + } + + MM_Wait(10); + } + + /* Use the current line settings for "auto" mode. */ + if(pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || + pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) + { + if(Value32 & PHY_CTRL_AUTO_NEG_ENABLE) + { + CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; + + /* We may be exiting low power mode and the link is in */ + /* 10mb. In this case, we need to restart autoneg. */ + LM_ReadPhy(pDevice, BCM540X_1000BASET_CTRL_REG, &Value32); + pDevice->advertising1000 = Value32; + /* 5702FE supports 10/100Mb only. */ + if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5703 || + pDevice->BondId != GRC_MISC_BD_ID_5702FE) + { + if(!(Value32 & (BCM540X_AN_AD_1000BASET_HALF | + BCM540X_AN_AD_1000BASET_FULL))) + { + CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; + } + } + } + else + { + CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; + } + } + else + { + /* Force line settings. */ + /* Use the current setting if it matches the user's requested */ + /* setting. */ + LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); + if((pDevice->LineSpeed == CurrentLineSpeed) && + (pDevice->DuplexMode == CurrentDuplexMode)) + { + if ((pDevice->DisableAutoNeg && + !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) || + (!pDevice->DisableAutoNeg && + (Value32 & PHY_CTRL_AUTO_NEG_ENABLE))) + { + CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; + } + else + { + CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; + } + } + else + { + CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH; + } + } + + /* Save line settings. */ + pDevice->LineSpeed = CurrentLineSpeed; + pDevice->DuplexMode = CurrentDuplexMode; + pDevice->MediaType = LM_MEDIA_TYPE_UTP; } return CurrentLinkStatus; @@ -4593,51 +4576,51 @@ LM_SetFlowControl( /* See Table 28B-3 of 802.3ab-1999 spec. */ if(pDevice->FlowControlCap & LM_FLOW_CONTROL_AUTO_PAUSE) { - if(LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE) - { - if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) - { - if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) - { - FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE | - LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - else if(RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE) - { - FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - } - else - { - if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) - { - FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE | - LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - } - } - else if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) - { - if((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) && - (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)) - { - FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE; - } - } + if(LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE) + { + if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) + { + if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) + { + FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE | + LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + else if(RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE) + { + FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + } + else + { + if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) + { + FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE | + LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + } + } + else if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) + { + if((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) && + (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)) + { + FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE; + } + } } else { - FlowCap = pDevice->FlowControlCap; + FlowCap = pDevice->FlowControlCap; } /* Enable/disable rx PAUSE. */ pDevice->RxMode &= ~RX_MODE_ENABLE_FLOW_CONTROL; if(FlowCap & LM_FLOW_CONTROL_RECEIVE_PAUSE && - (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE || - pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)) + (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE || + pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)) { - pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE; - pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL; + pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE; + pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL; } REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode); @@ -4645,11 +4628,11 @@ LM_SetFlowControl( /* Enable/disable tx PAUSE. */ pDevice->TxMode &= ~TX_MODE_ENABLE_FLOW_CONTROL; if(FlowCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE && - (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE || - pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)) + (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE || + pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)) { - pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE; - pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL; + pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE; + pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL; } REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode); @@ -4676,51 +4659,50 @@ LM_InitBcm800xPhy( /* Reset the SERDES during init and when we have link. */ if(!pDevice->InitDone || Value32 & MAC_STATUS_PCS_SYNCED) { - /* Set PLL lock range. */ - LM_WritePhy(pDevice, 0x16, 0x8007); + /* Set PLL lock range. */ + LM_WritePhy(pDevice, 0x16, 0x8007); - /* Software reset. */ - LM_WritePhy(pDevice, 0x00, 0x8000); + /* Software reset. */ + LM_WritePhy(pDevice, 0x00, 0x8000); - /* Wait for reset to complete. */ - for(j = 0; j < 500; j++) - { - MM_Wait(10); - } + /* Wait for reset to complete. */ + for(j = 0; j < 500; j++) + { + MM_Wait(10); + } - /* Config mode; seletct PMA/Ch 1 regs. */ - LM_WritePhy(pDevice, 0x10, 0x8411); + /* Config mode; seletct PMA/Ch 1 regs. */ + LM_WritePhy(pDevice, 0x10, 0x8411); - /* Enable auto-lock and comdet, select txclk for tx. */ - LM_WritePhy(pDevice, 0x11, 0x0a10); + /* Enable auto-lock and comdet, select txclk for tx. */ + LM_WritePhy(pDevice, 0x11, 0x0a10); - LM_WritePhy(pDevice, 0x18, 0x00a0); - LM_WritePhy(pDevice, 0x16, 0x41ff); + LM_WritePhy(pDevice, 0x18, 0x00a0); + LM_WritePhy(pDevice, 0x16, 0x41ff); - /* Assert and deassert POR. */ - LM_WritePhy(pDevice, 0x13, 0x0400); - MM_Wait(40); - LM_WritePhy(pDevice, 0x13, 0x0000); + /* Assert and deassert POR. */ + LM_WritePhy(pDevice, 0x13, 0x0400); + MM_Wait(40); + LM_WritePhy(pDevice, 0x13, 0x0000); - LM_WritePhy(pDevice, 0x11, 0x0a50); - MM_Wait(40); - LM_WritePhy(pDevice, 0x11, 0x0a10); + LM_WritePhy(pDevice, 0x11, 0x0a50); + MM_Wait(40); + LM_WritePhy(pDevice, 0x11, 0x0a10); - /* Delay for signal to stabilize. */ - for(j = 0; j < 15000; j++) - { - MM_Wait(10); - } + /* Delay for signal to stabilize. */ + for(j = 0; j < 15000; j++) + { + MM_Wait(10); + } - /* Deselect the channel register so we can read the PHY id later. */ - LM_WritePhy(pDevice, 0x10, 0x8011); + /* Deselect the channel register so we can read the PHY id later. */ + LM_WritePhy(pDevice, 0x10, 0x8011); } return LM_STATUS_SUCCESS; } - /******************************************************************************/ /* Description: */ /* */ @@ -4748,12 +4730,12 @@ LM_SetupFiberPhy( /* Initialize the BCM8002 SERDES PHY. */ switch(pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM8002_PHY_ID: - LM_InitBcm800xPhy(pDevice); - break; + case PHY_BCM8002_PHY_ID: + LM_InitBcm800xPhy(pDevice); + break; - default: - break; + default: + break; } /* Enable link change interrupt. */ @@ -4766,218 +4748,218 @@ LM_SetupFiberPhy( Value32 = REG_RD(pDevice, MacCtrl.Status); if(Value32 & MAC_STATUS_PCS_SYNCED) { - if((pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO) || - (pDevice->DisableAutoNeg == FALSE)) - { - /* auto-negotiation mode. */ - /* Initialize the autoneg default capaiblities. */ - AutonegInit(&pDevice->AnInfo); - - /* Set the context pointer to point to the main device structure. */ - pDevice->AnInfo.pContext = pDevice; - - /* Setup flow control advertisement register. */ - Value32 = GetPhyAdFlowCntrlSettings(pDevice); - if(Value32 & PHY_AN_AD_PAUSE_CAPABLE) - { - pDevice->AnInfo.mr_adv_sym_pause = 1; - } - else - { - pDevice->AnInfo.mr_adv_sym_pause = 0; - } - - if(Value32 & PHY_AN_AD_ASYM_PAUSE) - { - pDevice->AnInfo.mr_adv_asym_pause = 1; - } - else - { - pDevice->AnInfo.mr_adv_asym_pause = 0; - } - - /* Try to autoneg up to six times. */ - if (pDevice->IgnoreTbiLinkChange) - { - Cnt = 1; - } - else - { - Cnt = 6; - } - for (j = 0; j < Cnt; j++) - { - REG_WR(pDevice, MacCtrl.TxAutoNeg, 0); - - Value32 = pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK; - REG_WR(pDevice, MacCtrl.Mode, Value32); - MM_Wait(20); - - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_SEND_CONFIGS); - - MM_Wait(20); - - pDevice->AnInfo.State = AN_STATE_UNKNOWN; - pDevice->AnInfo.CurrentTime_us = 0; - - REG_WR(pDevice, Grc.Timer, 0); - for(k = 0; (pDevice->AnInfo.CurrentTime_us < 75000) && - (k < 75000); k++) - { - AnStatus = Autoneg8023z(&pDevice->AnInfo); - - if((AnStatus == AUTONEG_STATUS_DONE) || - (AnStatus == AUTONEG_STATUS_FAILED)) - { - break; - } - - pDevice->AnInfo.CurrentTime_us = REG_RD(pDevice, Grc.Timer); - - } - if((AnStatus == AUTONEG_STATUS_DONE) || - (AnStatus == AUTONEG_STATUS_FAILED)) - { - break; - } - if (j >= 1) - { - if (!(REG_RD(pDevice, MacCtrl.Status) & - MAC_STATUS_PCS_SYNCED)) { - break; - } - } - } - - /* Stop sending configs. */ - MM_AnTxIdle(&pDevice->AnInfo); - - /* Resolve flow control settings. */ - if((AnStatus == AUTONEG_STATUS_DONE) && - pDevice->AnInfo.mr_an_complete && pDevice->AnInfo.mr_link_ok && - pDevice->AnInfo.mr_lp_adv_full_duplex) - { - LM_UINT32 RemotePhyAd; - LM_UINT32 LocalPhyAd; - - LocalPhyAd = 0; - if(pDevice->AnInfo.mr_adv_sym_pause) - { - LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE; - } - - if(pDevice->AnInfo.mr_adv_asym_pause) - { - LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE; - } - - RemotePhyAd = 0; - if(pDevice->AnInfo.mr_lp_adv_sym_pause) - { - RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE; - } - - if(pDevice->AnInfo.mr_lp_adv_asym_pause) - { - RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE; - } - - LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd); - - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } - for (j = 0; j < 30; j++) - { - MM_Wait(20); - REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - MM_Wait(20); - if ((REG_RD(pDevice, MacCtrl.Status) & - (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0) - break; - } - if (pDevice->PollTbiLink) - { - Value32 = REG_RD(pDevice, MacCtrl.Status); - if (Value32 & MAC_STATUS_RECEIVING_CFG) - { - pDevice->IgnoreTbiLinkChange = TRUE; - } - else - { - pDevice->IgnoreTbiLinkChange = FALSE; - } - } - Value32 = REG_RD(pDevice, MacCtrl.Status); - if (CurrentLinkStatus == LM_STATUS_LINK_DOWN && - (Value32 & MAC_STATUS_PCS_SYNCED) && - ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0)) - { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } - } - else - { - /* We are forcing line speed. */ - pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE; - LM_SetFlowControl(pDevice, 0, 0); - - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_SEND_CONFIGS); - } + if((pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO) || + (pDevice->DisableAutoNeg == FALSE)) + { + /* auto-negotiation mode. */ + /* Initialize the autoneg default capaiblities. */ + AutonegInit(&pDevice->AnInfo); + + /* Set the context pointer to point to the main device structure. */ + pDevice->AnInfo.pContext = pDevice; + + /* Setup flow control advertisement register. */ + Value32 = GetPhyAdFlowCntrlSettings(pDevice); + if(Value32 & PHY_AN_AD_PAUSE_CAPABLE) + { + pDevice->AnInfo.mr_adv_sym_pause = 1; + } + else + { + pDevice->AnInfo.mr_adv_sym_pause = 0; + } + + if(Value32 & PHY_AN_AD_ASYM_PAUSE) + { + pDevice->AnInfo.mr_adv_asym_pause = 1; + } + else + { + pDevice->AnInfo.mr_adv_asym_pause = 0; + } + + /* Try to autoneg up to six times. */ + if (pDevice->IgnoreTbiLinkChange) + { + Cnt = 1; + } + else + { + Cnt = 6; + } + for (j = 0; j < Cnt; j++) + { + REG_WR(pDevice, MacCtrl.TxAutoNeg, 0); + + Value32 = pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK; + REG_WR(pDevice, MacCtrl.Mode, Value32); + MM_Wait(20); + + REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | + MAC_MODE_SEND_CONFIGS); + + MM_Wait(20); + + pDevice->AnInfo.State = AN_STATE_UNKNOWN; + pDevice->AnInfo.CurrentTime_us = 0; + + REG_WR(pDevice, Grc.Timer, 0); + for(k = 0; (pDevice->AnInfo.CurrentTime_us < 75000) && + (k < 75000); k++) + { + AnStatus = Autoneg8023z(&pDevice->AnInfo); + + if((AnStatus == AUTONEG_STATUS_DONE) || + (AnStatus == AUTONEG_STATUS_FAILED)) + { + break; + } + + pDevice->AnInfo.CurrentTime_us = REG_RD(pDevice, Grc.Timer); + + } + if((AnStatus == AUTONEG_STATUS_DONE) || + (AnStatus == AUTONEG_STATUS_FAILED)) + { + break; + } + if (j >= 1) + { + if (!(REG_RD(pDevice, MacCtrl.Status) & + MAC_STATUS_PCS_SYNCED)) { + break; + } + } + } + + /* Stop sending configs. */ + MM_AnTxIdle(&pDevice->AnInfo); + + /* Resolve flow control settings. */ + if((AnStatus == AUTONEG_STATUS_DONE) && + pDevice->AnInfo.mr_an_complete && pDevice->AnInfo.mr_link_ok && + pDevice->AnInfo.mr_lp_adv_full_duplex) + { + LM_UINT32 RemotePhyAd; + LM_UINT32 LocalPhyAd; + + LocalPhyAd = 0; + if(pDevice->AnInfo.mr_adv_sym_pause) + { + LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE; + } + + if(pDevice->AnInfo.mr_adv_asym_pause) + { + LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE; + } + + RemotePhyAd = 0; + if(pDevice->AnInfo.mr_lp_adv_sym_pause) + { + RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE; + } + + if(pDevice->AnInfo.mr_lp_adv_asym_pause) + { + RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE; + } + + LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd); + + CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; + } + for (j = 0; j < 30; j++) + { + MM_Wait(20); + REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | + MAC_STATUS_CFG_CHANGED); + MM_Wait(20); + if ((REG_RD(pDevice, MacCtrl.Status) & + (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0) + break; + } + if (pDevice->PollTbiLink) + { + Value32 = REG_RD(pDevice, MacCtrl.Status); + if (Value32 & MAC_STATUS_RECEIVING_CFG) + { + pDevice->IgnoreTbiLinkChange = TRUE; + } + else + { + pDevice->IgnoreTbiLinkChange = FALSE; + } + } + Value32 = REG_RD(pDevice, MacCtrl.Status); + if (CurrentLinkStatus == LM_STATUS_LINK_DOWN && + (Value32 & MAC_STATUS_PCS_SYNCED) && + ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0)) + { + CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; + } + } + else + { + /* We are forcing line speed. */ + pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE; + LM_SetFlowControl(pDevice, 0, 0); + + CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; + REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | + MAC_MODE_SEND_CONFIGS); + } } /* Set the link polarity bit. */ pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY; REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED | - (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS); + (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS); for (j = 0; j < 100; j++) { - REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - MM_Wait(5); - if ((REG_RD(pDevice, MacCtrl.Status) & - (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0) - break; + REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | + MAC_STATUS_CFG_CHANGED); + MM_Wait(5); + if ((REG_RD(pDevice, MacCtrl.Status) & + (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0) + break; } Value32 = REG_RD(pDevice, MacCtrl.Status); if((Value32 & MAC_STATUS_PCS_SYNCED) == 0) { - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - if (pDevice->DisableAutoNeg == FALSE) - { - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_SEND_CONFIGS); - MM_Wait(1); - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); - } + CurrentLinkStatus = LM_STATUS_LINK_DOWN; + if (pDevice->DisableAutoNeg == FALSE) + { + REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode | + MAC_MODE_SEND_CONFIGS); + MM_Wait(1); + REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); + } } /* Initialize the current link status. */ if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS; - pDevice->DuplexMode = LM_DUPLEX_MODE_FULL; - REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | - LED_CTRL_1000MBPS_LED_ON); + pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS; + pDevice->DuplexMode = LM_DUPLEX_MODE_FULL; + REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | + LED_CTRL_1000MBPS_LED_ON); } else { - pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN; - pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN; - REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | - LED_CTRL_OVERRIDE_TRAFFIC_LED); + pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN; + pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN; + REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | + LED_CTRL_OVERRIDE_TRAFFIC_LED); } /* Indicate link status. */ if (pDevice->LinkStatus != CurrentLinkStatus) { - pDevice->LinkStatus = CurrentLinkStatus; - MM_IndicateStatus(pDevice, CurrentLinkStatus); + pDevice->LinkStatus = CurrentLinkStatus; + MM_IndicateStatus(pDevice, CurrentLinkStatus); } return LM_STATUS_SUCCESS; @@ -5005,7 +4987,7 @@ LM_SetupCopperPhy( /* Clear link change attention. */ REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); + MAC_STATUS_CFG_CHANGED); /* Disable auto-polling for the moment. */ pDevice->MiMode = 0xc0000; @@ -5015,147 +4997,147 @@ LM_SetupCopperPhy( /* Determine the requested line speed and duplex. */ pDevice->OldLineSpeed = pDevice->LineSpeed; LM_TranslateRequestedMediaType(pDevice->RequestedMediaType, - &pDevice->MediaType, &pDevice->LineSpeed, &pDevice->DuplexMode); + &pDevice->MediaType, &pDevice->LineSpeed, &pDevice->DuplexMode); /* Initialize the phy chip. */ switch(pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM5400_PHY_ID: - case PHY_BCM5401_PHY_ID: - case PHY_BCM5411_PHY_ID: - case PHY_BCM5701_PHY_ID: - case PHY_BCM5703_PHY_ID: - case PHY_BCM5704_PHY_ID: - CurrentLinkStatus = LM_InitBcm540xPhy(pDevice); - break; + case PHY_BCM5400_PHY_ID: + case PHY_BCM5401_PHY_ID: + case PHY_BCM5411_PHY_ID: + case PHY_BCM5701_PHY_ID: + case PHY_BCM5703_PHY_ID: + case PHY_BCM5704_PHY_ID: + CurrentLinkStatus = LM_InitBcm540xPhy(pDevice); + break; - default: - break; + default: + break; } if(CurrentLinkStatus == LM_STATUS_LINK_SETTING_MISMATCH) { - CurrentLinkStatus = LM_STATUS_LINK_DOWN; + CurrentLinkStatus = LM_STATUS_LINK_DOWN; } /* Setup flow control. */ pDevice->FlowControl = LM_FLOW_CONTROL_NONE; if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - LM_FLOW_CONTROL FlowCap; /* Flow control capability. */ - - FlowCap = LM_FLOW_CONTROL_NONE; + LM_FLOW_CONTROL FlowCap; /* Flow control capability. */ - if(pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) - { - if(pDevice->DisableAutoNeg == FALSE || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) - { - LM_UINT32 ExpectedPhyAd; - LM_UINT32 LocalPhyAd; - LM_UINT32 RemotePhyAd; + FlowCap = LM_FLOW_CONTROL_NONE; - LM_ReadPhy(pDevice, PHY_AN_AD_REG, &LocalPhyAd); + if(pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) + { + if(pDevice->DisableAutoNeg == FALSE || + pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || + pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) + { + LM_UINT32 ExpectedPhyAd; + LM_UINT32 LocalPhyAd; + LM_UINT32 RemotePhyAd; + + LM_ReadPhy(pDevice, PHY_AN_AD_REG, &LocalPhyAd); pDevice->advertising = LocalPhyAd; - LocalPhyAd &= (PHY_AN_AD_ASYM_PAUSE | PHY_AN_AD_PAUSE_CAPABLE); - - ExpectedPhyAd = GetPhyAdFlowCntrlSettings(pDevice); - - if(LocalPhyAd != ExpectedPhyAd) - { - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - } - else - { - LM_ReadPhy(pDevice, PHY_LINK_PARTNER_ABILITY_REG, - &RemotePhyAd); - - LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd); - } - } - else - { - pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE; - LM_SetFlowControl(pDevice, 0, 0); - } - } + LocalPhyAd &= (PHY_AN_AD_ASYM_PAUSE | PHY_AN_AD_PAUSE_CAPABLE); + + ExpectedPhyAd = GetPhyAdFlowCntrlSettings(pDevice); + + if(LocalPhyAd != ExpectedPhyAd) + { + CurrentLinkStatus = LM_STATUS_LINK_DOWN; + } + else + { + LM_ReadPhy(pDevice, PHY_LINK_PARTNER_ABILITY_REG, + &RemotePhyAd); + + LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd); + } + } + else + { + pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE; + LM_SetFlowControl(pDevice, 0, 0); + } + } } if(CurrentLinkStatus == LM_STATUS_LINK_DOWN) { - LM_ForceAutoNeg(pDevice, pDevice->RequestedMediaType); + LM_ForceAutoNeg(pDevice, pDevice->RequestedMediaType); - /* If we force line speed, we make get link right away. */ - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - if(Value32 & PHY_STATUS_LINK_PASS) - { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } + /* If we force line speed, we make get link right away. */ + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + if(Value32 & PHY_STATUS_LINK_PASS) + { + CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; + } } /* GMII interface. */ pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK; if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - if(pDevice->LineSpeed == LM_LINE_SPEED_100MBPS || - pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) - { - pDevice->MacMode |= MAC_MODE_PORT_MODE_MII; - } - else - { - pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII; - } + if(pDevice->LineSpeed == LM_LINE_SPEED_100MBPS || + pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) + { + pDevice->MacMode |= MAC_MODE_PORT_MODE_MII; + } + else + { + pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII; + } } else { - pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII; + pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII; } /* Set the MAC to operate in the appropriate duplex mode. */ pDevice->MacMode &= ~MAC_MODE_HALF_DUPLEX; if(pDevice->DuplexMode == LM_DUPLEX_MODE_HALF) { - pDevice->MacMode |= MAC_MODE_HALF_DUPLEX; + pDevice->MacMode |= MAC_MODE_HALF_DUPLEX; } /* Set the link polarity bit. */ pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY; if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) { - if((pDevice->LedMode == LED_MODE_LINK10) || - (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE && - pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)) - { - pDevice->MacMode |= MAC_MODE_LINK_POLARITY; - } + if((pDevice->LedMode == LED_MODE_LINK10) || + (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE && + pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)) + { + pDevice->MacMode |= MAC_MODE_LINK_POLARITY; + } } else { - if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) - { - pDevice->MacMode |= MAC_MODE_LINK_POLARITY; - } - - /* Set LED mode. */ - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - Value32 = LED_CTRL_PHY_MODE_1; - } - else - { - if(pDevice->LedMode == LED_MODE_OUTPUT) - { - Value32 = LED_CTRL_PHY_MODE_2; - } - else - { - Value32 = LED_CTRL_PHY_MODE_1; - } - } - REG_WR(pDevice, MacCtrl.LedCtrl, Value32); + if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) + { + pDevice->MacMode |= MAC_MODE_LINK_POLARITY; + } + + /* Set LED mode. */ + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + Value32 = LED_CTRL_PHY_MODE_1; + } + else + { + if(pDevice->LedMode == LED_MODE_OUTPUT) + { + Value32 = LED_CTRL_PHY_MODE_2; + } + else + { + Value32 = LED_CTRL_PHY_MODE_1; + } + } + REG_WR(pDevice, MacCtrl.LedCtrl, Value32); } REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); @@ -5163,38 +5145,38 @@ LM_SetupCopperPhy( /* Enable auto polling. */ if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE; - REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); + pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE; + REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); } /* Enable phy link change attention. */ if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) { - REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_MI_INTERRUPT); + REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_MI_INTERRUPT); } else { - REG_WR(pDevice, MacCtrl.MacEvent, - MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN); + REG_WR(pDevice, MacCtrl.MacEvent, + MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN); } if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) && - (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) && - (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) && - (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) && - (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) || - !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))) + (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) && + (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) && + (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) && + (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) || + !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))) { - MM_Wait(120); - REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - MEM_WR_OFFSET(pDevice, T3_FIRMWARE_MAILBOX, - T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE); + MM_Wait(120); + REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | + MAC_STATUS_CFG_CHANGED); + MEM_WR_OFFSET(pDevice, T3_FIRMWARE_MAILBOX, + T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE); } /* Indicate link status. */ if (pDevice->LinkStatus != CurrentLinkStatus) { - pDevice->LinkStatus = CurrentLinkStatus; - MM_IndicateStatus(pDevice, CurrentLinkStatus); + pDevice->LinkStatus = CurrentLinkStatus; + MM_IndicateStatus(pDevice, CurrentLinkStatus); } return LM_STATUS_SUCCESS; @@ -5215,30 +5197,30 @@ LM_SetupPhy( #if INCLUDE_TBI_SUPPORT if(pDevice->EnableTbi) { - LmStatus = LM_SetupFiberPhy(pDevice); + LmStatus = LM_SetupFiberPhy(pDevice); } else #endif /* INCLUDE_TBI_SUPPORT */ { - LmStatus = LM_SetupCopperPhy(pDevice); + LmStatus = LM_SetupCopperPhy(pDevice); } if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) - { - Value32 = REG_RD(pDevice, PciCfg.PciState); - REG_WR(pDevice, PciCfg.PciState, - Value32 | T3_PCI_STATE_RETRY_SAME_DMA); - } + if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) + { + Value32 = REG_RD(pDevice, PciCfg.PciState); + REG_WR(pDevice, PciCfg.PciState, + Value32 | T3_PCI_STATE_RETRY_SAME_DMA); + } } if ((pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) && - (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)) + (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)) { - REG_WR(pDevice, MacCtrl.TxLengths, 0x26ff); + REG_WR(pDevice, MacCtrl.TxLengths, 0x26ff); } else { - REG_WR(pDevice, MacCtrl.TxLengths, 0x2620); + REG_WR(pDevice, MacCtrl.TxLengths, 0x2620); } return LmStatus; @@ -5259,48 +5241,47 @@ PLM_UINT32 pData32) { if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode & - ~MI_MODE_AUTO_POLLING_ENABLE); - MM_Wait(40); + REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode & + ~MI_MODE_AUTO_POLLING_ENABLE); + MM_Wait(40); } Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) | - ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) | - MI_COM_CMD_READ | MI_COM_START; + ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) | + MI_COM_CMD_READ | MI_COM_START; REG_WR(pDevice, MacCtrl.MiCom, Value32); for(j = 0; j < 20; j++) { - MM_Wait(25); + MM_Wait(25); - Value32 = REG_RD(pDevice, MacCtrl.MiCom); + Value32 = REG_RD(pDevice, MacCtrl.MiCom); - if(!(Value32 & MI_COM_BUSY)) - { - MM_Wait(5); - Value32 = REG_RD(pDevice, MacCtrl.MiCom); - Value32 &= MI_COM_PHY_DATA_MASK; - break; - } + if(!(Value32 & MI_COM_BUSY)) + { + MM_Wait(5); + Value32 = REG_RD(pDevice, MacCtrl.MiCom); + Value32 &= MI_COM_PHY_DATA_MASK; + break; + } } if(Value32 & MI_COM_BUSY) { - Value32 = 0; + Value32 = 0; } *pData32 = Value32; if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); - MM_Wait(40); + REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); + MM_Wait(40); } } /* LM_ReadPhy */ - /******************************************************************************/ /* Description: */ /* */ @@ -5316,34 +5297,34 @@ LM_UINT32 Data32) { if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode & - ~MI_MODE_AUTO_POLLING_ENABLE); - MM_Wait(40); + REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode & + ~MI_MODE_AUTO_POLLING_ENABLE); + MM_Wait(40); } Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) | - ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) | - (Data32 & MI_COM_PHY_DATA_MASK) | MI_COM_CMD_WRITE | MI_COM_START; + ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) | + (Data32 & MI_COM_PHY_DATA_MASK) | MI_COM_CMD_WRITE | MI_COM_START; REG_WR(pDevice, MacCtrl.MiCom, Value32); for(j = 0; j < 20; j++) { - MM_Wait(25); + MM_Wait(25); - Value32 = REG_RD(pDevice, MacCtrl.MiCom); + Value32 = REG_RD(pDevice, MacCtrl.MiCom); - if(!(Value32 & MI_COM_BUSY)) - { - MM_Wait(5); - break; - } + if(!(Value32 & MI_COM_BUSY)) + { + MM_Wait(5); + break; + } } if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); - MM_Wait(40); + REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode); + MM_Wait(40); } } /* LM_WritePhy */ @@ -5375,33 +5356,33 @@ LM_POWER_STATE PowerLevel) { if(PowerLevel == LM_POWER_STATE_D0) { - /* Bring the card out of low power mode. */ - PmCtrl |= T3_PM_POWER_STATE_D0; - MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl); + /* Bring the card out of low power mode. */ + PmCtrl |= T3_PM_POWER_STATE_D0; + MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl); - REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl); - MM_Wait (40); + REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl); + MM_Wait (40); #if 0 /* Bugfix by jmb...can't call WritePhy here because pDevice not fully initialized */ - LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x02); + LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x02); #endif - return LM_STATUS_SUCCESS; + return LM_STATUS_SUCCESS; } else if(PowerLevel == LM_POWER_STATE_D1) { - PmCtrl |= T3_PM_POWER_STATE_D1; + PmCtrl |= T3_PM_POWER_STATE_D1; } else if(PowerLevel == LM_POWER_STATE_D2) { - PmCtrl |= T3_PM_POWER_STATE_D2; + PmCtrl |= T3_PM_POWER_STATE_D2; } else if(PowerLevel == LM_POWER_STATE_D3) { - PmCtrl |= T3_PM_POWER_STATE_D3; + PmCtrl |= T3_PM_POWER_STATE_D3; } else { - return LM_STATUS_FAILURE; + return LM_STATUS_FAILURE; } PmCtrl |= T3_PM_PME_ENABLE; @@ -5412,9 +5393,9 @@ LM_POWER_STATE PowerLevel) { if(!pDevice->RestoreOnWakeUp) { - pDevice->RestoreOnWakeUp = TRUE; - pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg; - pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType; + pDevice->RestoreOnWakeUp = TRUE; + pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg; + pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType; } /* Force auto-negotiation to 10 line speed. */ @@ -5431,168 +5412,168 @@ LM_POWER_STATE PowerLevel) { if (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE) { - /* Enable WOL. */ - LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x5a); - MM_Wait(40); - - /* Set LED mode. */ - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - Value32 = LED_CTRL_PHY_MODE_1; - } - else - { - if(pDevice->LedMode == LED_MODE_OUTPUT) - { - Value32 = LED_CTRL_PHY_MODE_2; - } - else - { - Value32 = LED_CTRL_PHY_MODE_1; - } - } - - Value32 = MAC_MODE_PORT_MODE_MII; - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) - { - if(pDevice->LedMode == LED_MODE_LINK10 || - pDevice->WolSpeed == WOL_SPEED_10MB) - { - Value32 |= MAC_MODE_LINK_POLARITY; - } - } - else - { - Value32 |= MAC_MODE_LINK_POLARITY; - } - REG_WR(pDevice, MacCtrl.Mode, Value32); - MM_Wait(40); MM_Wait(40); MM_Wait(40); - - /* Always enable magic packet wake-up if we have vaux. */ - if((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) && - (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET)) - { - Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE; - } - - REG_WR(pDevice, MacCtrl.Mode, Value32); - - /* Enable the receiver. */ - REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_ENABLE); + /* Enable WOL. */ + LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x5a); + MM_Wait(40); + + /* Set LED mode. */ + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + Value32 = LED_CTRL_PHY_MODE_1; + } + else + { + if(pDevice->LedMode == LED_MODE_OUTPUT) + { + Value32 = LED_CTRL_PHY_MODE_2; + } + else + { + Value32 = LED_CTRL_PHY_MODE_1; + } + } + + Value32 = MAC_MODE_PORT_MODE_MII; + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) + { + if(pDevice->LedMode == LED_MODE_LINK10 || + pDevice->WolSpeed == WOL_SPEED_10MB) + { + Value32 |= MAC_MODE_LINK_POLARITY; + } + } + else + { + Value32 |= MAC_MODE_LINK_POLARITY; + } + REG_WR(pDevice, MacCtrl.Mode, Value32); + MM_Wait(40); MM_Wait(40); MM_Wait(40); + + /* Always enable magic packet wake-up if we have vaux. */ + if((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) && + (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET)) + { + Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE; + } + + REG_WR(pDevice, MacCtrl.Mode, Value32); + + /* Enable the receiver. */ + REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_ENABLE); } /* Disable tx/rx clocks, and seletect an alternate clock. */ if(pDevice->WolSpeed == WOL_SPEED_100MB) { - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK; - } - else - { - Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK; - } - REG_WR(pDevice, PciCfg.ClockCtrl, Value32); - - MM_Wait(40); - - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_44MHZ_CORE_CLOCK; - } - else - { - Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_44MHZ_CORE_CLOCK; - } - - REG_WR(pDevice, PciCfg.ClockCtrl, Value32); - - MM_Wait(40); - - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_44MHZ_CORE_CLOCK; - } - else - { - Value32 = T3_PCI_44MHZ_CORE_CLOCK; - } - - REG_WR(pDevice, PciCfg.ClockCtrl, Value32); + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | + T3_PCI_SELECT_ALTERNATE_CLOCK; + } + else + { + Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK; + } + REG_WR(pDevice, PciCfg.ClockCtrl, Value32); + + MM_Wait(40); + + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | + T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_44MHZ_CORE_CLOCK; + } + else + { + Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | + T3_PCI_44MHZ_CORE_CLOCK; + } + + REG_WR(pDevice, PciCfg.ClockCtrl, Value32); + + MM_Wait(40); + + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | + T3_PCI_44MHZ_CORE_CLOCK; + } + else + { + Value32 = T3_PCI_44MHZ_CORE_CLOCK; + } + + REG_WR(pDevice, PciCfg.ClockCtrl, Value32); } else { - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_POWER_DOWN_PCI_PLL133; - } - else - { - Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_POWER_DOWN_PCI_PLL133; - } + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | + T3_PCI_SELECT_ALTERNATE_CLOCK | + T3_PCI_POWER_DOWN_PCI_PLL133; + } + else + { + Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | + T3_PCI_POWER_DOWN_PCI_PLL133; + } - REG_WR(pDevice, PciCfg.ClockCtrl, Value32); + REG_WR(pDevice, PciCfg.ClockCtrl, Value32); } MM_Wait(40); if(!pDevice->EepromWp && (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE)) { - /* Switch adapter to auxilliary power. */ - if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) - { - /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */ - REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1); - MM_Wait(40); - } - else - { - /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */ - REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2); - MM_Wait(40); - - /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */ - REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2); - MM_Wait(40); - - /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */ - REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1); - MM_Wait(40); - } + /* Switch adapter to auxilliary power. */ + if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 || + T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) + { + /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */ + REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | + GRC_MISC_LOCAL_CTRL_GPIO_OE0 | + GRC_MISC_LOCAL_CTRL_GPIO_OE1 | + GRC_MISC_LOCAL_CTRL_GPIO_OE2 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1); + MM_Wait(40); + } + else + { + /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */ + REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | + GRC_MISC_LOCAL_CTRL_GPIO_OE0 | + GRC_MISC_LOCAL_CTRL_GPIO_OE1 | + GRC_MISC_LOCAL_CTRL_GPIO_OE2 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2); + MM_Wait(40); + + /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */ + REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | + GRC_MISC_LOCAL_CTRL_GPIO_OE0 | + GRC_MISC_LOCAL_CTRL_GPIO_OE1 | + GRC_MISC_LOCAL_CTRL_GPIO_OE2 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2); + MM_Wait(40); + + /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */ + REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | + GRC_MISC_LOCAL_CTRL_GPIO_OE0 | + GRC_MISC_LOCAL_CTRL_GPIO_OE1 | + GRC_MISC_LOCAL_CTRL_GPIO_OE2 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | + GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1); + MM_Wait(40); + } } /* Set the phy to low power mode. */ @@ -5603,7 +5584,6 @@ LM_POWER_STATE PowerLevel) { } /* LM_SetPowerState */ - /******************************************************************************/ /* Description: */ /* */ @@ -5619,31 +5599,30 @@ GetPhyAdFlowCntrlSettings( /* Auto negotiation flow control only when autonegotiation is enabled. */ if(pDevice->DisableAutoNeg == FALSE || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) - { - /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */ - if((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) || - ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) && - (pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))) - { - Value32 |= PHY_AN_AD_PAUSE_CAPABLE; - } - else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE) - { - Value32 |= PHY_AN_AD_ASYM_PAUSE; - } - else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) - { - Value32 |= PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE; - } + pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || + pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) + { + /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */ + if((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) || + ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) && + (pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))) + { + Value32 |= PHY_AN_AD_PAUSE_CAPABLE; + } + else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE) + { + Value32 |= PHY_AN_AD_ASYM_PAUSE; + } + else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) + { + Value32 |= PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE; + } } return Value32; } - /******************************************************************************/ /* Description: */ /* */ @@ -5666,184 +5645,183 @@ LM_REQUESTED_MEDIA_TYPE RequestedMediaType) /* Get the interface type, line speed, and duplex mode. */ LM_TranslateRequestedMediaType(RequestedMediaType, &MediaType, &LineSpeed, - &DuplexMode); + &DuplexMode); if (pDevice->RestoreOnWakeUp) { - LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0); - pDevice->advertising1000 = 0; - Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF; - if (pDevice->WolSpeed == WOL_SPEED_100MB) - { - Value32 |= PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; - } - Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings(pDevice); - LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; + LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0); + pDevice->advertising1000 = 0; + Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF; + if (pDevice->WolSpeed == WOL_SPEED_100MB) + { + Value32 |= PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; + } + Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; + Value32 |= GetPhyAdFlowCntrlSettings(pDevice); + LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); + pDevice->advertising = Value32; } /* Setup the auto-negotiation advertisement register. */ else if(LineSpeed == LM_LINE_SPEED_UNKNOWN) { - /* Setup the 10/100 Mbps auto-negotiation advertisement register. */ - Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | - PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL | - PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; - Value32 |= GetPhyAdFlowCntrlSettings(pDevice); + /* Setup the 10/100 Mbps auto-negotiation advertisement register. */ + Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | + PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL | + PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; + Value32 |= GetPhyAdFlowCntrlSettings(pDevice); - LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; + LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); + pDevice->advertising = Value32; - /* Advertise 1000Mbps */ - Value32 = BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL; + /* Advertise 1000Mbps */ + Value32 = BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL; #if INCLUDE_5701_AX_FIX - /* Bug: workaround for CRC error in gigabit mode when we are in */ - /* slave mode. This will force the PHY to operate in */ - /* master mode. */ - if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) - { - Value32 |= BCM540X_CONFIG_AS_MASTER | - BCM540X_ENABLE_CONFIG_AS_MASTER; - } + /* Bug: workaround for CRC error in gigabit mode when we are in */ + /* slave mode. This will force the PHY to operate in */ + /* master mode. */ + if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || + pDevice->ChipRevId == T3_CHIP_ID_5701_B0) + { + Value32 |= BCM540X_CONFIG_AS_MASTER | + BCM540X_ENABLE_CONFIG_AS_MASTER; + } #endif - LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32); - pDevice->advertising1000 = Value32; + LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32); + pDevice->advertising1000 = Value32; } else { - if(LineSpeed == LM_LINE_SPEED_1000MBPS) - { - Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings(pDevice); - - LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - - if(DuplexMode != LM_DUPLEX_MODE_FULL) - { - Value32 = BCM540X_AN_AD_1000BASET_HALF; - } - else - { - Value32 = BCM540X_AN_AD_1000BASET_FULL; - } - - LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32); - pDevice->advertising1000 = Value32; - } - else if(LineSpeed == LM_LINE_SPEED_100MBPS) - { - LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0); - pDevice->advertising1000 = 0; - - if(DuplexMode != LM_DUPLEX_MODE_FULL) - { - Value32 = PHY_AN_AD_100BASETX_HALF; - } - else - { - Value32 = PHY_AN_AD_100BASETX_FULL; - } - - Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings(pDevice); - - LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - } - else if(LineSpeed == LM_LINE_SPEED_10MBPS) - { - LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0); - pDevice->advertising1000 = 0; - - if(DuplexMode != LM_DUPLEX_MODE_FULL) - { - Value32 = PHY_AN_AD_10BASET_HALF; - } - else - { - Value32 = PHY_AN_AD_10BASET_FULL; - } - - Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings(pDevice); - - LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - } + if(LineSpeed == LM_LINE_SPEED_1000MBPS) + { + Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; + Value32 |= GetPhyAdFlowCntrlSettings(pDevice); + + LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); + pDevice->advertising = Value32; + + if(DuplexMode != LM_DUPLEX_MODE_FULL) + { + Value32 = BCM540X_AN_AD_1000BASET_HALF; + } + else + { + Value32 = BCM540X_AN_AD_1000BASET_FULL; + } + + LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32); + pDevice->advertising1000 = Value32; + } + else if(LineSpeed == LM_LINE_SPEED_100MBPS) + { + LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0); + pDevice->advertising1000 = 0; + + if(DuplexMode != LM_DUPLEX_MODE_FULL) + { + Value32 = PHY_AN_AD_100BASETX_HALF; + } + else + { + Value32 = PHY_AN_AD_100BASETX_FULL; + } + + Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; + Value32 |= GetPhyAdFlowCntrlSettings(pDevice); + + LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); + pDevice->advertising = Value32; + } + else if(LineSpeed == LM_LINE_SPEED_10MBPS) + { + LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0); + pDevice->advertising1000 = 0; + + if(DuplexMode != LM_DUPLEX_MODE_FULL) + { + Value32 = PHY_AN_AD_10BASET_HALF; + } + else + { + Value32 = PHY_AN_AD_10BASET_FULL; + } + + Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; + Value32 |= GetPhyAdFlowCntrlSettings(pDevice); + + LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32); + pDevice->advertising = Value32; + } } /* Force line speed if auto-negotiation is disabled. */ if(pDevice->DisableAutoNeg && LineSpeed != LM_LINE_SPEED_UNKNOWN) { - /* This code path is executed only when there is link. */ - pDevice->MediaType = MediaType; - pDevice->LineSpeed = LineSpeed; - pDevice->DuplexMode = DuplexMode; - - /* Force line seepd. */ - NewPhyCtrl = 0; - switch(LineSpeed) - { - case LM_LINE_SPEED_10MBPS: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS; - break; - case LM_LINE_SPEED_100MBPS: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS; - break; - case LM_LINE_SPEED_1000MBPS: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS; - break; - default: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS; - break; - } - - if(DuplexMode == LM_DUPLEX_MODE_FULL) - { - NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE; - } - - /* Don't do anything if the PHY_CTRL is already what we wanted. */ - LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); - if(Value32 != NewPhyCtrl) - { - /* Temporary bring the link down before forcing line speed. */ - LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_LOOPBACK_MODE); - - /* Wait for link to go down. */ - for(Cnt = 0; Cnt < 15000; Cnt++) - { - MM_Wait(10); - - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); - - if(!(Value32 & PHY_STATUS_LINK_PASS)) - { - MM_Wait(40); - break; - } - } - - LM_WritePhy(pDevice, PHY_CTRL_REG, NewPhyCtrl); - MM_Wait(40); - } + /* This code path is executed only when there is link. */ + pDevice->MediaType = MediaType; + pDevice->LineSpeed = LineSpeed; + pDevice->DuplexMode = DuplexMode; + + /* Force line seepd. */ + NewPhyCtrl = 0; + switch(LineSpeed) + { + case LM_LINE_SPEED_10MBPS: + NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS; + break; + case LM_LINE_SPEED_100MBPS: + NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS; + break; + case LM_LINE_SPEED_1000MBPS: + NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS; + break; + default: + NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS; + break; + } + + if(DuplexMode == LM_DUPLEX_MODE_FULL) + { + NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE; + } + + /* Don't do anything if the PHY_CTRL is already what we wanted. */ + LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32); + if(Value32 != NewPhyCtrl) + { + /* Temporary bring the link down before forcing line speed. */ + LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_LOOPBACK_MODE); + + /* Wait for link to go down. */ + for(Cnt = 0; Cnt < 15000; Cnt++) + { + MM_Wait(10); + + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32); + + if(!(Value32 & PHY_STATUS_LINK_PASS)) + { + MM_Wait(40); + break; + } + } + + LM_WritePhy(pDevice, PHY_CTRL_REG, NewPhyCtrl); + MM_Wait(40); + } } else { - LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE | - PHY_CTRL_RESTART_AUTO_NEG); + LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE | + PHY_CTRL_RESTART_AUTO_NEG); } return LM_STATUS_SUCCESS; } /* LM_ForceAutoNegBcm540xPhy */ - /******************************************************************************/ /* Description: */ /* */ @@ -5859,18 +5837,18 @@ LM_REQUESTED_MEDIA_TYPE RequestedMediaType) /* Initialize the phy chip. */ switch(pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM5400_PHY_ID: - case PHY_BCM5401_PHY_ID: - case PHY_BCM5411_PHY_ID: - case PHY_BCM5701_PHY_ID: - case PHY_BCM5703_PHY_ID: - case PHY_BCM5704_PHY_ID: - LmStatus = LM_ForceAutoNegBcm540xPhy(pDevice, RequestedMediaType); - break; + case PHY_BCM5400_PHY_ID: + case PHY_BCM5401_PHY_ID: + case PHY_BCM5411_PHY_ID: + case PHY_BCM5701_PHY_ID: + case PHY_BCM5703_PHY_ID: + case PHY_BCM5704_PHY_ID: + LmStatus = LM_ForceAutoNegBcm540xPhy(pDevice, RequestedMediaType); + break; - default: - LmStatus = LM_STATUS_FAILURE; - break; + default: + LmStatus = LM_STATUS_FAILURE; + break; } return LmStatus; @@ -5882,123 +5860,123 @@ LM_REQUESTED_MEDIA_TYPE RequestedMediaType) /* Return: */ /******************************************************************************/ LM_STATUS LM_LoadFirmware(PLM_DEVICE_BLOCK pDevice, - PT3_FWIMG_INFO pFwImg, - LM_UINT32 LoadCpu, - LM_UINT32 StartCpu) + PT3_FWIMG_INFO pFwImg, + LM_UINT32 LoadCpu, + LM_UINT32 StartCpu) { LM_UINT32 i; LM_UINT32 address; if (LoadCpu & T3_RX_CPU_ID) { - if (LM_HaltCpu(pDevice,T3_RX_CPU_ID) != LM_STATUS_SUCCESS) - { - return LM_STATUS_FAILURE; - } - - /* First of all clear scrach pad memory */ - for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i+=4) - { - LM_RegWrInd(pDevice,T3_RX_CPU_SPAD_ADDR+i,0); - } - - /* Copy code first */ - address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff); - for (i = 0; i <= pFwImg->Text.Length; i+=4) - { - LM_RegWrInd(pDevice,address+i, - ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]); - } - - address = T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff); - for (i = 0; i <= pFwImg->ROnlyData.Length; i+=4) - { - LM_RegWrInd(pDevice,address+i, - ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]); - } - - address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff); - for (i= 0; i <= pFwImg->Data.Length; i+=4) - { - LM_RegWrInd(pDevice,address+i, - ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]); - } + if (LM_HaltCpu(pDevice,T3_RX_CPU_ID) != LM_STATUS_SUCCESS) + { + return LM_STATUS_FAILURE; + } + + /* First of all clear scrach pad memory */ + for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i+=4) + { + LM_RegWrInd(pDevice,T3_RX_CPU_SPAD_ADDR+i,0); + } + + /* Copy code first */ + address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff); + for (i = 0; i <= pFwImg->Text.Length; i+=4) + { + LM_RegWrInd(pDevice,address+i, + ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]); + } + + address = T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff); + for (i = 0; i <= pFwImg->ROnlyData.Length; i+=4) + { + LM_RegWrInd(pDevice,address+i, + ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]); + } + + address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff); + for (i= 0; i <= pFwImg->Data.Length; i+=4) + { + LM_RegWrInd(pDevice,address+i, + ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]); + } } if (LoadCpu & T3_TX_CPU_ID) { - if (LM_HaltCpu(pDevice,T3_TX_CPU_ID) != LM_STATUS_SUCCESS) - { - return LM_STATUS_FAILURE; - } - - /* First of all clear scrach pad memory */ - for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i+=4) - { - LM_RegWrInd(pDevice,T3_TX_CPU_SPAD_ADDR+i,0); - } - - /* Copy code first */ - address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff); - for (i= 0; i <= pFwImg->Text.Length; i+=4) - { - LM_RegWrInd(pDevice,address+i, - ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]); - } - - address = T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff); - for (i= 0; i <= pFwImg->ROnlyData.Length; i+=4) - { - LM_RegWrInd(pDevice,address+i, - ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]); - } - - address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff); - for (i= 0; i <= pFwImg->Data.Length; i+=4) - { - LM_RegWrInd(pDevice,address+i, - ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]); - } + if (LM_HaltCpu(pDevice,T3_TX_CPU_ID) != LM_STATUS_SUCCESS) + { + return LM_STATUS_FAILURE; + } + + /* First of all clear scrach pad memory */ + for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i+=4) + { + LM_RegWrInd(pDevice,T3_TX_CPU_SPAD_ADDR+i,0); + } + + /* Copy code first */ + address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff); + for (i= 0; i <= pFwImg->Text.Length; i+=4) + { + LM_RegWrInd(pDevice,address+i, + ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]); + } + + address = T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff); + for (i= 0; i <= pFwImg->ROnlyData.Length; i+=4) + { + LM_RegWrInd(pDevice,address+i, + ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]); + } + + address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff); + for (i= 0; i <= pFwImg->Data.Length; i+=4) + { + LM_RegWrInd(pDevice,address+i, + ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]); + } } if (StartCpu & T3_RX_CPU_ID) { - /* Start Rx CPU */ - REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); - REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress); - for (i = 0 ; i < 5; i++) - { - if (pFwImg->StartAddress == REG_RD(pDevice,rxCpu.reg.PC)) - break; + /* Start Rx CPU */ + REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); + REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress); + for (i = 0 ; i < 5; i++) + { + if (pFwImg->StartAddress == REG_RD(pDevice,rxCpu.reg.PC)) + break; - REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); - REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT); - REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress); - MM_Wait(1000); - } + REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); + REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT); + REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress); + MM_Wait(1000); + } - REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); - REG_WR(pDevice,rxCpu.reg.mode, 0); + REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); + REG_WR(pDevice,rxCpu.reg.mode, 0); } if (StartCpu & T3_TX_CPU_ID) { - /* Start Tx CPU */ - REG_WR(pDevice,txCpu.reg.state, 0xffffffff); - REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress); - for (i = 0 ; i < 5; i++) - { - if (pFwImg->StartAddress == REG_RD(pDevice,txCpu.reg.PC)) - break; + /* Start Tx CPU */ + REG_WR(pDevice,txCpu.reg.state, 0xffffffff); + REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress); + for (i = 0 ; i < 5; i++) + { + if (pFwImg->StartAddress == REG_RD(pDevice,txCpu.reg.PC)) + break; - REG_WR(pDevice,txCpu.reg.state, 0xffffffff); - REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT); - REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress); - MM_Wait(1000); - } + REG_WR(pDevice,txCpu.reg.state, 0xffffffff); + REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT); + REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress); + MM_Wait(1000); + } - REG_WR(pDevice,txCpu.reg.state, 0xffffffff); - REG_WR(pDevice,txCpu.reg.mode, 0); + REG_WR(pDevice,txCpu.reg.state, 0xffffffff); + REG_WR(pDevice,txCpu.reg.mode, 0); } return LM_STATUS_SUCCESS; @@ -6010,29 +5988,29 @@ STATIC LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number) if (cpu_number == T3_RX_CPU_ID) { - for (i = 0 ; i < 10000; i++) - { - REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); - REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT); + for (i = 0 ; i < 10000; i++) + { + REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); + REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT); - if (REG_RD(pDevice,rxCpu.reg.mode) & CPU_MODE_HALT) - break; - } + if (REG_RD(pDevice,rxCpu.reg.mode) & CPU_MODE_HALT) + break; + } - REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); - REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT); - MM_Wait(10); + REG_WR(pDevice,rxCpu.reg.state, 0xffffffff); + REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT); + MM_Wait(10); } else { - for (i = 0 ; i < 10000; i++) - { - REG_WR(pDevice,txCpu.reg.state, 0xffffffff); - REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT); + for (i = 0 ; i < 10000; i++) + { + REG_WR(pDevice,txCpu.reg.state, 0xffffffff); + REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT); - if (REG_RD(pDevice,txCpu.reg.mode) & CPU_MODE_HALT) - break; - } + if (REG_RD(pDevice,txCpu.reg.mode) & CPU_MODE_HALT) + break; + } } return (( i == 10000) ? LM_STATUS_FAILURE : LM_STATUS_SUCCESS); @@ -6049,10 +6027,10 @@ LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec) if(BlinkDurationSec == 0) { return 0; - } + } if(BlinkDurationSec > 120) - { - BlinkDurationSec = 120; + { + BlinkDurationSec = 120; } Oldcfg = REG_RD(pDevice, MacCtrl.LedCtrl); @@ -6060,7 +6038,7 @@ LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec) { if(j % 2) { - /* Turn on the LEDs. */ + /* Turn on the LEDs. */ REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | LED_CTRL_1000MBPS_LED_ON | @@ -6072,20 +6050,20 @@ LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec) } else { - /* Turn off the LEDs. */ + /* Turn off the LEDs. */ REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | LED_CTRL_OVERRIDE_TRAFFIC_LED); } #ifndef EMBEDDED - current->state = TASK_INTERRUPTIBLE; - if (schedule_timeout(HZ/2) != 0) { - ret = -EINTR; - break; - } + current->state = TASK_INTERRUPTIBLE; + if (schedule_timeout(HZ/2) != 0) { + ret = -EINTR; + break; + } #else - udelay(100000); /* 1s sleep */ + udelay(100000); /* 1s sleep */ #endif } REG_WR(pDevice, MacCtrl.LedCtrl, Oldcfg); @@ -6093,8 +6071,8 @@ LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec) } int t3_do_dma(PLM_DEVICE_BLOCK pDevice, - LM_PHYSICAL_ADDRESS host_addr_phy, int length, - int dma_read) + LM_PHYSICAL_ADDRESS host_addr_phy, int length, + int dma_read) { T3_DMA_DESC dma_desc; int i; @@ -6112,15 +6090,15 @@ int t3_do_dma(PLM_DEVICE_BLOCK pDevice, if (dma_read) { - dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) | - T3_QID_DMA_HIGH_PRI_READ; - REG_WR(pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE); + dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) | + T3_QID_DMA_HIGH_PRI_READ; + REG_WR(pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE); } else { - dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) | - T3_QID_DMA_HIGH_PRI_WRITE; - REG_WR(pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE); + dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) | + T3_QID_DMA_HIGH_PRI_WRITE; + REG_WR(pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE); } dma_desc_addr = T3_NIC_DMA_DESC_POOL_ADDR; @@ -6128,28 +6106,28 @@ int t3_do_dma(PLM_DEVICE_BLOCK pDevice, /* Writing this DMA descriptor to DMA memory */ for (i = 0; i < sizeof(T3_DMA_DESC); i += 4) { - value32 = *((PLM_UINT32) (((PLM_UINT8) &dma_desc) + i)); - MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, dma_desc_addr+i); - MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG, cpu_to_le32(value32)); + value32 = *((PLM_UINT32) (((PLM_UINT8) &dma_desc) + i)); + MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, dma_desc_addr+i); + MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG, cpu_to_le32(value32)); } MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, 0); if (dma_read) - REG_WR(pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue, dma_desc_addr); + REG_WR(pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue, dma_desc_addr); else - REG_WR(pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue, dma_desc_addr); + REG_WR(pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue, dma_desc_addr); for (i = 0; i < 40; i++) { - if (dma_read) - value32 = REG_RD(pDevice, Ftq.RcvBdCompFtqFifoEnqueueDequeue); - else - value32 = REG_RD(pDevice, Ftq.RcvDataCompFtqFifoEnqueueDequeue); + if (dma_read) + value32 = REG_RD(pDevice, Ftq.RcvBdCompFtqFifoEnqueueDequeue); + else + value32 = REG_RD(pDevice, Ftq.RcvDataCompFtqFifoEnqueueDequeue); - if ((value32 & 0xffff) == dma_desc_addr) - break; + if ((value32 & 0xffff) == dma_desc_addr) + break; - MM_Wait(10); + MM_Wait(10); } return LM_STATUS_SUCCESS; @@ -6157,65 +6135,65 @@ int t3_do_dma(PLM_DEVICE_BLOCK pDevice, STATIC LM_STATUS LM_DmaTest(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt, - LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize) + LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize) { int j; LM_UINT32 *ptr; int dma_success = 0; if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 && - T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) + T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) { - return LM_STATUS_SUCCESS; + return LM_STATUS_SUCCESS; } while (!dma_success) { - /* Fill data with incremental patterns */ - ptr = (LM_UINT32 *)pBufferVirt; - for (j = 0; j < BufferSize/4; j++) - *ptr++ = j; - - if (t3_do_dma(pDevice,BufferPhy,BufferSize, 1) == LM_STATUS_FAILURE) - { - return LM_STATUS_FAILURE; - } - - MM_Wait(40); - ptr = (LM_UINT32 *)pBufferVirt; - /* Fill data with zero */ - for (j = 0; j < BufferSize/4; j++) - *ptr++ = 0; - - if (t3_do_dma(pDevice,BufferPhy,BufferSize, 0) == LM_STATUS_FAILURE) - { - return LM_STATUS_FAILURE; - } - - MM_Wait(40); - /* Check for data */ - ptr = (LM_UINT32 *)pBufferVirt; - for (j = 0; j < BufferSize/4; j++) - { - if (*ptr++ != j) - { - if ((pDevice->DmaReadWriteCtrl & DMA_CTRL_WRITE_BOUNDARY_MASK) - == DMA_CTRL_WRITE_BOUNDARY_DISABLE) - { - pDevice->DmaReadWriteCtrl = (pDevice->DmaReadWriteCtrl & - ~DMA_CTRL_WRITE_BOUNDARY_MASK) | - DMA_CTRL_WRITE_BOUNDARY_16; - REG_WR(pDevice, PciCfg.DmaReadWriteCtrl, - pDevice->DmaReadWriteCtrl); - break; - } - else - { - return LM_STATUS_FAILURE; - } - } - } - if (j == (BufferSize/4)) - dma_success = 1; + /* Fill data with incremental patterns */ + ptr = (LM_UINT32 *)pBufferVirt; + for (j = 0; j < BufferSize/4; j++) + *ptr++ = j; + + if (t3_do_dma(pDevice,BufferPhy,BufferSize, 1) == LM_STATUS_FAILURE) + { + return LM_STATUS_FAILURE; + } + + MM_Wait(40); + ptr = (LM_UINT32 *)pBufferVirt; + /* Fill data with zero */ + for (j = 0; j < BufferSize/4; j++) + *ptr++ = 0; + + if (t3_do_dma(pDevice,BufferPhy,BufferSize, 0) == LM_STATUS_FAILURE) + { + return LM_STATUS_FAILURE; + } + + MM_Wait(40); + /* Check for data */ + ptr = (LM_UINT32 *)pBufferVirt; + for (j = 0; j < BufferSize/4; j++) + { + if (*ptr++ != j) + { + if ((pDevice->DmaReadWriteCtrl & DMA_CTRL_WRITE_BOUNDARY_MASK) + == DMA_CTRL_WRITE_BOUNDARY_DISABLE) + { + pDevice->DmaReadWriteCtrl = (pDevice->DmaReadWriteCtrl & + ~DMA_CTRL_WRITE_BOUNDARY_MASK) | + DMA_CTRL_WRITE_BOUNDARY_16; + REG_WR(pDevice, PciCfg.DmaReadWriteCtrl, + pDevice->DmaReadWriteCtrl); + break; + } + else + { + return LM_STATUS_FAILURE; + } + } + } + if (j == (BufferSize/4)) + dma_success = 1; } return LM_STATUS_SUCCESS; } |