diff options
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/ich.c | 519 |
1 files changed, 265 insertions, 254 deletions
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index 9848e0b..50354fd 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <dm.h> #include <errno.h> #include <malloc.h> #include <spi.h> @@ -19,154 +20,99 @@ #define SPI_OPCODE_WREN 0x06 #define SPI_OPCODE_FAST_READ 0x0b -struct ich_ctlr { +struct ich_spi_platdata { pci_dev_t dev; /* PCI device number */ int ich_version; /* Controller version, 7 or 9 */ bool use_sbase; /* Use SBASE instead of RCB */ +}; + +struct ich_spi_priv { int ichspi_lock; int locked; - uint8_t *opmenu; + int opmenu; int menubytes; void *base; /* Base of register set */ - uint16_t *preop; - uint16_t *optype; - uint32_t *addr; - uint8_t *data; + int preop; + int optype; + int addr; + int data; unsigned databytes; - uint8_t *status; - uint16_t *control; - uint32_t *bbar; + int status; + int control; + int bbar; uint32_t *pr; /* only for ich9 */ - uint8_t *speed; /* pointer to speed control */ + int speed; /* pointer to speed control */ ulong max_speed; /* Maximum bus speed in MHz */ + ulong cur_speed; /* Current bus speed */ + struct spi_trans trans; /* current transaction in progress */ }; -struct ich_ctlr ctlr; - -static inline struct ich_spi_slave *to_ich_spi(struct spi_slave *slave) -{ - return container_of(slave, struct ich_spi_slave, slave); -} - -static unsigned int ich_reg(const void *addr) -{ - return (unsigned)(addr - ctlr.base) & 0xffff; -} - -static u8 ich_readb(const void *addr) +static u8 ich_readb(struct ich_spi_priv *priv, int reg) { - u8 value = readb(addr); + u8 value = readb(priv->base + reg); - debug("read %2.2x from %4.4x\n", value, ich_reg(addr)); + debug("read %2.2x from %4.4x\n", value, reg); return value; } -static u16 ich_readw(const void *addr) +static u16 ich_readw(struct ich_spi_priv *priv, int reg) { - u16 value = readw(addr); + u16 value = readw(priv->base + reg); - debug("read %4.4x from %4.4x\n", value, ich_reg(addr)); + debug("read %4.4x from %4.4x\n", value, reg); return value; } -static u32 ich_readl(const void *addr) +static u32 ich_readl(struct ich_spi_priv *priv, int reg) { - u32 value = readl(addr); + u32 value = readl(priv->base + reg); - debug("read %8.8x from %4.4x\n", value, ich_reg(addr)); + debug("read %8.8x from %4.4x\n", value, reg); return value; } -static void ich_writeb(u8 value, void *addr) +static void ich_writeb(struct ich_spi_priv *priv, u8 value, int reg) { - writeb(value, addr); - debug("wrote %2.2x to %4.4x\n", value, ich_reg(addr)); + writeb(value, priv->base + reg); + debug("wrote %2.2x to %4.4x\n", value, reg); } -static void ich_writew(u16 value, void *addr) +static void ich_writew(struct ich_spi_priv *priv, u16 value, int reg) { - writew(value, addr); - debug("wrote %4.4x to %4.4x\n", value, ich_reg(addr)); + writew(value, priv->base + reg); + debug("wrote %4.4x to %4.4x\n", value, reg); } -static void ich_writel(u32 value, void *addr) +static void ich_writel(struct ich_spi_priv *priv, u32 value, int reg) { - writel(value, addr); - debug("wrote %8.8x to %4.4x\n", value, ich_reg(addr)); + writel(value, priv->base + reg); + debug("wrote %8.8x to %4.4x\n", value, reg); } -static void write_reg(const void *value, void *dest, uint32_t size) +static void write_reg(struct ich_spi_priv *priv, const void *value, + int dest_reg, uint32_t size) { - memcpy_toio(dest, value, size); + memcpy_toio(priv->base + dest_reg, value, size); } -static void read_reg(const void *src, void *value, uint32_t size) +static void read_reg(struct ich_spi_priv *priv, int src_reg, void *value, + uint32_t size) { - memcpy_fromio(value, src, size); + memcpy_fromio(value, priv->base + src_reg, size); } -static void ich_set_bbar(struct ich_ctlr *ctlr, uint32_t minaddr) +static void ich_set_bbar(struct ich_spi_priv *ctlr, uint32_t minaddr) { const uint32_t bbar_mask = 0x00ffff00; uint32_t ichspi_bbar; minaddr &= bbar_mask; - ichspi_bbar = ich_readl(ctlr->bbar) & ~bbar_mask; + ichspi_bbar = ich_readl(ctlr, ctlr->bbar) & ~bbar_mask; ichspi_bbar |= minaddr; - ich_writel(ichspi_bbar, ctlr->bbar); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - puts("spi_cs_is_valid used but not implemented\n"); - return 0; -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct ich_spi_slave *ich; - - ich = spi_alloc_slave(struct ich_spi_slave, bus, cs); - if (!ich) { - puts("ICH SPI: Out of memory\n"); - return NULL; - } - - /* - * Yes this controller can only write a small number of bytes at - * once! The limit is typically 64 bytes. - */ - ich->slave.max_write_size = ctlr.databytes; - ich->speed = max_hz; - - /* - * ICH 7 SPI controller only supports array read command - * and byte program command for SST flash - */ - if (ctlr.ich_version == 7 || ctlr.use_sbase) { - ich->slave.op_mode_rx = SPI_OPM_RX_AS; - ich->slave.op_mode_tx = SPI_OPM_TX_BP; - } - - return &ich->slave; -} - -struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node, - int spi_node) -{ - /* We only support a single SPI at present */ - return spi_setup_slave(0, 0, 20000000, 0); -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct ich_spi_slave *ich = to_ich_spi(slave); - - free(ich); + ich_writel(ctlr, ichspi_bbar, ctlr->bbar); } /* @@ -209,7 +155,7 @@ static int ich9_can_do_33mhz(pci_dev_t dev) return speed == 1; } -static int ich_find_spi_controller(struct ich_ctlr *ich) +static int ich_find_spi_controller(struct ich_spi_platdata *ich) { int last_bus = pci_last_busno(); int bus; @@ -242,131 +188,77 @@ static int ich_find_spi_controller(struct ich_ctlr *ich) return -ENODEV; } -static int ich_init_controller(struct ich_ctlr *ctlr) +static int ich_init_controller(struct ich_spi_platdata *plat, + struct ich_spi_priv *ctlr) { uint8_t *rcrb; /* Root Complex Register Block */ uint32_t rcba; /* Root Complex Base Address */ uint32_t sbase_addr; uint8_t *sbase; - pci_read_config_dword(ctlr->dev, 0xf0, &rcba); + pci_read_config_dword(plat->dev, 0xf0, &rcba); /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ rcrb = (uint8_t *)(rcba & 0xffffc000); /* SBASE is similar */ - pci_read_config_dword(ctlr->dev, 0x54, &sbase_addr); + pci_read_config_dword(plat->dev, 0x54, &sbase_addr); sbase = (uint8_t *)(sbase_addr & 0xfffffe00); - if (ctlr->ich_version == 7) { + if (plat->ich_version == 7) { struct ich7_spi_regs *ich7_spi; ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020); - ctlr->ichspi_lock = ich_readw(&ich7_spi->spis) & SPIS_LOCK; - ctlr->opmenu = ich7_spi->opmenu; + ctlr->ichspi_lock = readw(&ich7_spi->spis) & SPIS_LOCK; + ctlr->opmenu = offsetof(struct ich7_spi_regs, opmenu); ctlr->menubytes = sizeof(ich7_spi->opmenu); - ctlr->optype = &ich7_spi->optype; - ctlr->addr = &ich7_spi->spia; - ctlr->data = (uint8_t *)ich7_spi->spid; + ctlr->optype = offsetof(struct ich7_spi_regs, optype); + ctlr->addr = offsetof(struct ich7_spi_regs, spia); + ctlr->data = offsetof(struct ich7_spi_regs, spid); ctlr->databytes = sizeof(ich7_spi->spid); - ctlr->status = (uint8_t *)&ich7_spi->spis; - ctlr->control = &ich7_spi->spic; - ctlr->bbar = &ich7_spi->bbar; - ctlr->preop = &ich7_spi->preop; + ctlr->status = offsetof(struct ich7_spi_regs, spis); + ctlr->control = offsetof(struct ich7_spi_regs, spic); + ctlr->bbar = offsetof(struct ich7_spi_regs, bbar); + ctlr->preop = offsetof(struct ich7_spi_regs, preop); ctlr->base = ich7_spi; - } else if (ctlr->ich_version == 9) { + } else if (plat->ich_version == 9) { struct ich9_spi_regs *ich9_spi; - if (ctlr->use_sbase) + if (plat->use_sbase) ich9_spi = (struct ich9_spi_regs *)sbase; else ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800); - ctlr->ichspi_lock = ich_readw(&ich9_spi->hsfs) & HSFS_FLOCKDN; - ctlr->opmenu = ich9_spi->opmenu; + ctlr->ichspi_lock = readw(&ich9_spi->hsfs) & HSFS_FLOCKDN; + ctlr->opmenu = offsetof(struct ich9_spi_regs, opmenu); ctlr->menubytes = sizeof(ich9_spi->opmenu); - ctlr->optype = &ich9_spi->optype; - ctlr->addr = &ich9_spi->faddr; - ctlr->data = (uint8_t *)ich9_spi->fdata; + ctlr->optype = offsetof(struct ich9_spi_regs, optype); + ctlr->addr = offsetof(struct ich9_spi_regs, faddr); + ctlr->data = offsetof(struct ich9_spi_regs, fdata); ctlr->databytes = sizeof(ich9_spi->fdata); - ctlr->status = &ich9_spi->ssfs; - ctlr->control = (uint16_t *)ich9_spi->ssfc; - ctlr->speed = ich9_spi->ssfc + 2; - ctlr->bbar = &ich9_spi->bbar; - ctlr->preop = &ich9_spi->preop; + ctlr->status = offsetof(struct ich9_spi_regs, ssfs); + ctlr->control = offsetof(struct ich9_spi_regs, ssfc); + ctlr->speed = ctlr->control + 2; + ctlr->bbar = offsetof(struct ich9_spi_regs, bbar); + ctlr->preop = offsetof(struct ich9_spi_regs, preop); ctlr->pr = &ich9_spi->pr[0]; ctlr->base = ich9_spi; } else { - debug("ICH SPI: Unrecognized ICH version %d.\n", - ctlr->ich_version); - return -1; + debug("ICH SPI: Unrecognised ICH version %d\n", + plat->ich_version); + return -EINVAL; } /* Work out the maximum speed we can support */ ctlr->max_speed = 20000000; - if (ctlr->ich_version == 9 && ich9_can_do_33mhz(ctlr->dev)) + if (plat->ich_version == 9 && ich9_can_do_33mhz(plat->dev)) ctlr->max_speed = 33000000; debug("ICH SPI: Version %d detected at %p, speed %ld\n", - ctlr->ich_version, ctlr->base, ctlr->max_speed); + plat->ich_version, ctlr->base, ctlr->max_speed); ich_set_bbar(ctlr, 0); return 0; } -void spi_init(void) -{ - uint8_t bios_cntl; - - if (ich_find_spi_controller(&ctlr)) { - printf("ICH SPI: Cannot find device\n"); - return; - } - - if (ich_init_controller(&ctlr)) { - printf("ICH SPI: Cannot setup controller\n"); - return; - } - - /* - * Disable the BIOS write protect so write commands are allowed. On - * v9, deassert SMM BIOS Write Protect Disable. - */ - if (ctlr.use_sbase) { - struct ich9_spi_regs *ich9_spi; - - ich9_spi = (struct ich9_spi_regs *)ctlr.base; - bios_cntl = ich_readb(&ich9_spi->bcr); - bios_cntl &= ~(1 << 5); /* clear Enable InSMM_STS (EISS) */ - bios_cntl |= 1; /* Write Protect Disable (WPD) */ - ich_writeb(bios_cntl, &ich9_spi->bcr); - } else { - pci_read_config_byte(ctlr.dev, 0xdc, &bios_cntl); - if (ctlr.ich_version == 9) - bios_cntl &= ~(1 << 5); - pci_write_config_byte(ctlr.dev, 0xdc, bios_cntl | 0x1); - } -} - -int spi_claim_bus(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ -} - static inline void spi_use_out(struct spi_trans *trans, unsigned bytes) { trans->out += bytes; @@ -412,19 +304,19 @@ static void spi_setup_type(struct spi_trans *trans, int data_bytes) } } -static int spi_setup_opcode(struct spi_trans *trans) +static int spi_setup_opcode(struct ich_spi_priv *ctlr, struct spi_trans *trans) { uint16_t optypes; - uint8_t opmenu[ctlr.menubytes]; + uint8_t opmenu[ctlr->menubytes]; trans->opcode = trans->out[0]; spi_use_out(trans, 1); - if (!ctlr.ichspi_lock) { + if (!ctlr->ichspi_lock) { /* The lock is off, so just use index 0. */ - ich_writeb(trans->opcode, ctlr.opmenu); - optypes = ich_readw(ctlr.optype); + ich_writeb(ctlr, trans->opcode, ctlr->opmenu); + optypes = ich_readw(ctlr, ctlr->optype); optypes = (optypes & 0xfffc) | (trans->type & 0x3); - ich_writew(optypes, ctlr.optype); + ich_writew(ctlr, optypes, ctlr->optype); return 0; } else { /* The lock is on. See if what we need is on the menu. */ @@ -435,20 +327,20 @@ static int spi_setup_opcode(struct spi_trans *trans) if (trans->opcode == SPI_OPCODE_WREN) return 0; - read_reg(ctlr.opmenu, opmenu, sizeof(opmenu)); - for (opcode_index = 0; opcode_index < ctlr.menubytes; + read_reg(ctlr, ctlr->opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < ctlr->menubytes; opcode_index++) { if (opmenu[opcode_index] == trans->opcode) break; } - if (opcode_index == ctlr.menubytes) { + if (opcode_index == ctlr->menubytes) { printf("ICH SPI: Opcode %x not found\n", trans->opcode); - return -1; + return -EINVAL; } - optypes = ich_readw(ctlr.optype); + optypes = ich_readw(ctlr, ctlr->optype); optype = (optypes >> (opcode_index * 2)) & 0x3; if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && @@ -459,7 +351,7 @@ static int spi_setup_opcode(struct spi_trans *trans) if (optype != trans->type) { printf("ICH SPI: Transaction doesn't fit type %d\n", optype); - return -1; + return -ENOSPC; } return opcode_index; } @@ -481,7 +373,7 @@ static int spi_setup_offset(struct spi_trans *trans) return 1; default: printf("Unrecognized SPI transaction type %#x\n", trans->type); - return -1; + return -EPROTO; } } @@ -492,16 +384,19 @@ static int spi_setup_offset(struct spi_trans *trans) * * Return the last read status value on success or -1 on failure. */ -static int ich_status_poll(u16 bitmask, int wait_til_set) +static int ich_status_poll(struct ich_spi_priv *ctlr, u16 bitmask, + int wait_til_set) { int timeout = 600000; /* This will result in 6s */ u16 status = 0; while (timeout--) { - status = ich_readw(ctlr.status); + status = ich_readw(ctlr, ctlr->status); if (wait_til_set ^ ((status & bitmask) == 0)) { - if (wait_til_set) - ich_writew((status & bitmask), ctlr.status); + if (wait_til_set) { + ich_writew(ctlr, status & bitmask, + ctlr->status); + } return status; } udelay(10); @@ -509,30 +404,28 @@ static int ich_status_poll(u16 bitmask, int wait_til_set) printf("ICH SPI: SCIP timeout, read %x, expected %x\n", status, bitmask); - return -1; + return -ETIMEDOUT; } -/* -int spi_xfer(struct spi_slave *slave, const void *dout, - unsigned int bitsout, void *din, unsigned int bitsin) -*/ -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) +static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { - struct ich_spi_slave *ich = to_ich_spi(slave); + struct udevice *bus = dev_get_parent(dev); + struct ich_spi_priv *ctlr = dev_get_priv(bus); uint16_t control; int16_t opcode_index; int with_address; int status; int bytes = bitlen / 8; - struct spi_trans *trans = &ich->trans; + struct spi_trans *trans = &ctlr->trans; unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END); int using_cmd = 0; + int ret; /* Ee don't support writing partial bytes. */ if (bitlen % 8) { debug("ICH SPI: Accessing partial bytes not supported\n"); - return -1; + return -EPROTONOSUPPORT; } /* An empty end transaction can be ignored */ @@ -546,7 +439,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (dout && type == SPI_XFER_BEGIN) { if (bytes > ICH_MAX_CMD_LEN) { debug("ICH SPI: Command length limit exceeded\n"); - return -1; + return -ENOSPC; } memcpy(trans->cmd, dout, bytes); trans->cmd_len = bytes; @@ -577,21 +470,22 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, /* There has to always at least be an opcode. */ if (!trans->bytesout) { debug("ICH SPI: No opcode for transfer\n"); - return -1; + return -EPROTO; } - if (ich_status_poll(SPIS_SCIP, 0) == -1) - return -1; + ret = ich_status_poll(ctlr, SPIS_SCIP, 0); + if (ret < 0) + return ret; - ich_writew(SPIS_CDS | SPIS_FCERR, ctlr.status); + ich_writew(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status); spi_setup_type(trans, using_cmd ? bytes : 0); - opcode_index = spi_setup_opcode(trans); + opcode_index = spi_setup_opcode(ctlr, trans); if (opcode_index < 0) - return -1; + return -EINVAL; with_address = spi_setup_offset(trans); if (with_address < 0) - return -1; + return -EINVAL; if (trans->opcode == SPI_OPCODE_WREN) { /* @@ -599,20 +493,20 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, * in order to prevent the Management Engine from * issuing a transaction between WREN and DATA. */ - if (!ctlr.ichspi_lock) - ich_writew(trans->opcode, ctlr.preop); + if (!ctlr->ichspi_lock) + ich_writew(ctlr, trans->opcode, ctlr->preop); return 0; } - if (ctlr.speed && ctlr.max_speed >= 33000000) { + if (ctlr->speed && ctlr->max_speed >= 33000000) { int byte; - byte = ich_readb(ctlr.speed); - if (ich->speed >= 33000000) + byte = ich_readb(ctlr, ctlr->speed); + if (ctlr->cur_speed >= 33000000) byte |= SSFC_SCF_33MHZ; else byte &= ~SSFC_SCF_33MHZ; - ich_writeb(byte, ctlr.speed); + ich_writeb(ctlr, byte, ctlr->speed); } /* See if we have used up the command data */ @@ -623,35 +517,36 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } /* Preset control fields */ - control = ich_readw(ctlr.control); + control = ich_readw(ctlr, ctlr->control); control &= ~SSFC_RESERVED; control = SPIC_SCGO | ((opcode_index & 0x07) << 4); /* Issue atomic preop cycle if needed */ - if (ich_readw(ctlr.preop)) + if (ich_readw(ctlr, ctlr->preop)) control |= SPIC_ACS; if (!trans->bytesout && !trans->bytesin) { /* SPI addresses are 24 bit only */ - if (with_address) - ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr); - + if (with_address) { + ich_writel(ctlr, trans->offset & 0x00FFFFFF, + ctlr->addr); + } /* * This is a 'no data' command (like Write Enable), its * bitesout size was 1, decremented to zero while executing * spi_setup_opcode() above. Tell the chip to send the * command. */ - ich_writew(control, ctlr.control); + ich_writew(ctlr, control, ctlr->control); /* wait for the result */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; + status = ich_status_poll(ctlr, SPIS_CDS | SPIS_FCERR, 1); + if (status < 0) + return status; if (status & SPIS_FCERR) { debug("ICH SPI: Command transaction error\n"); - return -1; + return -EIO; } return 0; @@ -664,9 +559,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, * and followed by other SPI commands, and this sequence is controlled * by the SPI chip driver. */ - if (trans->bytesout > ctlr.databytes) { + if (trans->bytesout > ctlr->databytes) { debug("ICH SPI: Too much to write. This should be prevented by the driver's max_write_size?\n"); - return -1; + return -EPROTO; } /* @@ -677,41 +572,41 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, uint32_t data_length; /* SPI addresses are 24 bit only */ - ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr); + ich_writel(ctlr, trans->offset & 0x00FFFFFF, ctlr->addr); if (trans->bytesout) - data_length = min(trans->bytesout, ctlr.databytes); + data_length = min(trans->bytesout, ctlr->databytes); else - data_length = min(trans->bytesin, ctlr.databytes); + data_length = min(trans->bytesin, ctlr->databytes); /* Program data into FDATA0 to N */ if (trans->bytesout) { - write_reg(trans->out, ctlr.data, data_length); + write_reg(ctlr, trans->out, ctlr->data, data_length); spi_use_out(trans, data_length); if (with_address) trans->offset += data_length; } /* Add proper control fields' values */ - control &= ~((ctlr.databytes - 1) << 8); + control &= ~((ctlr->databytes - 1) << 8); control |= SPIC_DS; control |= (data_length - 1) << 8; /* write it */ - ich_writew(control, ctlr.control); + ich_writew(ctlr, control, ctlr->control); /* Wait for Cycle Done Status or Flash Cycle Error. */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; + status = ich_status_poll(ctlr, SPIS_CDS | SPIS_FCERR, 1); + if (status < 0) + return status; if (status & SPIS_FCERR) { debug("ICH SPI: Data transaction error\n"); - return -1; + return -EIO; } if (trans->bytesin) { - read_reg(ctlr.data, trans->in, data_length); + read_reg(ctlr, ctlr->data, trans->in, data_length); spi_use_in(trans, data_length); if (with_address) trans->offset += data_length; @@ -719,7 +614,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } /* Clear atomic preop now that xfer is done */ - ich_writew(0, ctlr.preop); + ich_writew(ctlr, 0, ctlr->preop); return 0; } @@ -731,15 +626,18 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, * don't actually take effect until the HSFS[FLOCKDN] bit is set, but that's * done elsewhere. */ -int spi_write_protect_region(uint32_t lower_limit, uint32_t length, int hint) +int spi_write_protect_region(struct udevice *dev, uint32_t lower_limit, + uint32_t length, int hint) { + struct udevice *bus = dev->parent; + struct ich_spi_priv *ctlr = dev_get_priv(bus); uint32_t tmplong; uint32_t upper_limit; - if (!ctlr.pr) { + if (!ctlr->pr) { printf("%s: operation not supported on this chipset\n", __func__); - return -1; + return -ENOSYS; } if (length == 0 || @@ -747,7 +645,7 @@ int spi_write_protect_region(uint32_t lower_limit, uint32_t length, int hint) hint < 0 || hint > 4) { printf("%s(0x%x, 0x%x, %d): invalid args\n", __func__, lower_limit, length, hint); - return -1; + return -EPERM; } upper_limit = lower_limit + length - 1; @@ -766,8 +664,121 @@ int spi_write_protect_region(uint32_t lower_limit, uint32_t length, int hint) ((lower_limit & 0x01fff000) >> 12); printf("%s: writing 0x%08x to %p\n", __func__, tmplong, - &ctlr.pr[hint]); - ctlr.pr[hint] = tmplong; + &ctlr->pr[hint]); + ctlr->pr[hint] = tmplong; + + return 0; +} + +static int ich_spi_probe(struct udevice *bus) +{ + struct ich_spi_platdata *plat = dev_get_platdata(bus); + struct ich_spi_priv *priv = dev_get_priv(bus); + uint8_t bios_cntl; + int ret; + + ret = ich_init_controller(plat, priv); + if (ret) + return ret; + /* + * Disable the BIOS write protect so write commands are allowed. On + * v9, deassert SMM BIOS Write Protect Disable. + */ + if (plat->use_sbase) { + struct ich9_spi_regs *ich9_spi; + + ich9_spi = priv->base; + bios_cntl = ich_readb(priv, ich9_spi->bcr); + bios_cntl &= ~(1 << 5); /* clear Enable InSMM_STS (EISS) */ + bios_cntl |= 1; /* Write Protect Disable (WPD) */ + ich_writeb(priv, bios_cntl, ich9_spi->bcr); + } else { + pci_read_config_byte(plat->dev, 0xdc, &bios_cntl); + if (plat->ich_version == 9) + bios_cntl &= ~(1 << 5); + pci_write_config_byte(plat->dev, 0xdc, bios_cntl | 0x1); + } + + priv->cur_speed = priv->max_speed; + + return 0; +} + +static int ich_spi_ofdata_to_platdata(struct udevice *bus) +{ + struct ich_spi_platdata *plat = dev_get_platdata(bus); + int ret; + + ret = ich_find_spi_controller(plat); + if (ret) + return ret; return 0; } + +static int ich_spi_set_speed(struct udevice *bus, uint speed) +{ + struct ich_spi_priv *priv = dev_get_priv(bus); + + priv->cur_speed = speed; + + return 0; +} + +static int ich_spi_set_mode(struct udevice *bus, uint mode) +{ + debug("%s: mode=%d\n", __func__, mode); + + return 0; +} + +static int ich_spi_child_pre_probe(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct ich_spi_platdata *plat = dev_get_platdata(bus); + struct ich_spi_priv *priv = dev_get_priv(bus); + struct spi_slave *slave = dev_get_parentdata(dev); + + /* + * Yes this controller can only write a small number of bytes at + * once! The limit is typically 64 bytes. + */ + slave->max_write_size = priv->databytes; + /* + * ICH 7 SPI controller only supports array read command + * and byte program command for SST flash + */ + if (plat->ich_version == 7) { + slave->op_mode_rx = SPI_OPM_RX_AS; + slave->op_mode_tx = SPI_OPM_TX_BP; + } + + return 0; +} + +static const struct dm_spi_ops ich_spi_ops = { + .xfer = ich_spi_xfer, + .set_speed = ich_spi_set_speed, + .set_mode = ich_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id ich_spi_ids[] = { + { .compatible = "intel,ich-spi" }, + { } +}; + +U_BOOT_DRIVER(ich_spi) = { + .name = "ich_spi", + .id = UCLASS_SPI, + .of_match = ich_spi_ids, + .ops = &ich_spi_ops, + .ofdata_to_platdata = ich_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ich_spi_platdata), + .priv_auto_alloc_size = sizeof(struct ich_spi_priv), + .child_pre_probe = ich_spi_child_pre_probe, + .probe = ich_spi_probe, +}; |