diff options
Diffstat (limited to 'drivers/spi/ti_qspi.c')
| -rw-r--r-- | drivers/spi/ti_qspi.c | 33 |
1 files changed, 30 insertions, 3 deletions
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 5a5b482..dfa5d0c 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -11,6 +11,8 @@ #include <asm/arch/omap.h> #include <malloc.h> #include <spi.h> +#include <asm/gpio.h> +#include <asm/omap_gpio.h> /* ti qpsi register bit masks */ #define QSPI_TIMEOUT 2000000 @@ -39,7 +41,8 @@ #define MM_SWITCH 0x01 #define MEM_CS 0x100 #define MEM_CS_UNSELECT 0xfffff0ff -#define MMAP_START_ADDR 0x5c000000 +#define MMAP_START_ADDR_DRA 0x5c000000 +#define MMAP_START_ADDR_AM43x 0x30000000 #define CORE_CTRL_IO 0x4a002558 #define QSPI_CMD_READ (0x3 << 0) @@ -99,7 +102,11 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) struct spi_slave *slave = &qslave->slave; u32 memval = 0; - slave->memory_map = (void *)MMAP_START_ADDR; +#ifdef CONFIG_DRA7XX + slave->memory_map = (void *)MMAP_START_ADDR_DRA; +#else + slave->memory_map = (void *)MMAP_START_ADDR_AM43x; +#endif memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | QSPI_SETUP0_NUM_D_BYTES_NO_BITS | @@ -165,6 +172,11 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, { struct ti_qspi_slave *qslave; +#ifdef CONFIG_AM43XX + gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio"); + gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1); +#endif + qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs); if (!qslave) { printf("SPI_error: Fail to allocate ti_qspi_slave\n"); @@ -229,7 +241,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, const uchar *txp = dout; uchar *rxp = din; uint status; - int timeout, val; + int timeout; + +#ifdef CONFIG_DRA7XX + int val; +#endif debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n", slave->bus, slave->cs, bitlen, words, flags); @@ -237,15 +253,19 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, /* Setup mmap flags */ if (flags & SPI_XFER_MMAP) { writel(MM_SWITCH, &qslave->base->memswitch); +#ifdef CONFIG_DRA7XX val = readl(CORE_CTRL_IO); val |= MEM_CS; writel(val, CORE_CTRL_IO); +#endif return 0; } else if (flags & SPI_XFER_MMAP_END) { writel(~MM_SWITCH, &qslave->base->memswitch); +#ifdef CONFIG_DRA7XX val = readl(CORE_CTRL_IO); val &= MEM_CS_UNSELECT; writel(val, CORE_CTRL_IO); +#endif return 0; } @@ -265,6 +285,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, qslave->cmd |= QSPI_3_PIN; qslave->cmd |= 0xfff; +/* FIXME: This delay is required for successfull + * completion of read/write/erase. Once its root + * caused, it will be remove from the driver. + */ +#ifdef CONFIG_AM43XX + udelay(100); +#endif while (words--) { if (txp) { debug("tx cmd %08x dc %08x data %02x\n", |