summaryrefslogtreecommitdiff
path: root/drivers/spi/cadence_qspi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/cadence_qspi.c')
-rw-r--r--drivers/spi/cadence_qspi.c33
1 files changed, 20 insertions, 13 deletions
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 34a0f46..4f7fd52 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -37,9 +37,8 @@ static int cadence_spi_write_speed(struct udevice *bus, uint hz)
}
/* Calibration sequence to determine the read data capture delay register */
-static int spi_calibration(struct udevice *bus)
+static int spi_calibration(struct udevice *bus, uint hz)
{
- struct cadence_spi_platdata *plat = bus->platdata;
struct cadence_spi_priv *priv = dev_get_priv(bus);
void *base = priv->regbase;
u8 opcode_rdid = 0x9F;
@@ -64,7 +63,7 @@ static int spi_calibration(struct udevice *bus)
}
/* use back the intended clock and find low range */
- cadence_spi_write_speed(bus, plat->max_hz);
+ cadence_spi_write_speed(bus, hz);
for (i = 0; i < CQSPI_READ_CAPTURE_MAX_DELAY; i++) {
/* Disable QSPI */
cadence_qspi_apb_controller_disable(base);
@@ -111,7 +110,7 @@ static int spi_calibration(struct udevice *bus)
(range_hi + range_lo) / 2, range_lo, range_hi);
/* just to ensure we do once only when speed or chip select change */
- priv->qspi_calibrated_hz = plat->max_hz;
+ priv->qspi_calibrated_hz = hz;
priv->qspi_calibrated_cs = spi_chip_select(bus);
return 0;
@@ -123,17 +122,25 @@ static int cadence_spi_set_speed(struct udevice *bus, uint hz)
struct cadence_spi_priv *priv = dev_get_priv(bus);
int err;
+ if (hz > plat->max_hz)
+ hz = plat->max_hz;
+
/* Disable QSPI */
cadence_qspi_apb_controller_disable(priv->regbase);
- cadence_spi_write_speed(bus, hz);
-
- /* Calibration required for different SCLK speed or chip select */
- if (priv->qspi_calibrated_hz != plat->max_hz ||
+ /*
+ * Calibration required for different current SCLK speed, requested
+ * SCLK speed or chip select
+ */
+ if (priv->previous_hz != hz ||
+ priv->qspi_calibrated_hz != hz ||
priv->qspi_calibrated_cs != spi_chip_select(bus)) {
- err = spi_calibration(bus);
+ err = spi_calibration(bus, hz);
if (err)
return err;
+
+ /* prevent calibration run when same as previous request */
+ priv->previous_hz = hz;
}
/* Enable QSPI */
@@ -291,10 +298,6 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
plat->regbase = (void *)data[0];
plat->ahbbase = (void *)data[2];
- /* Use 500KHz as a suitable default */
- plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
- 500000);
-
/* All other paramters are embedded in the child node */
subnode = fdt_first_subnode(blob, node);
if (subnode < 0) {
@@ -302,6 +305,10 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
return -ENODEV;
}
+ /* Use 500 KHz as a suitable default */
+ plat->max_hz = fdtdec_get_uint(blob, subnode, "spi-max-frequency",
+ 500000);
+
/* Read other parameters from DT */
plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256);
plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16);