diff options
Diffstat (limited to 'drivers/smc91111.c')
| -rw-r--r-- | drivers/smc91111.c | 42 |
1 files changed, 38 insertions, 4 deletions
diff --git a/drivers/smc91111.c b/drivers/smc91111.c index 45bc248..4e180ec 100644 --- a/drivers/smc91111.c +++ b/drivers/smc91111.c @@ -481,7 +481,13 @@ static int smc_send_packet (volatile void *packet, int packet_length) int try = 0; int time_out; byte status; + byte saved_pnr; + word saved_ptr; + /* save PTR and PNR registers before manipulation */ + SMC_SELECT_BANK (2); + saved_pnr = SMC_inb( PN_REG ); + saved_ptr = SMC_inw( PTR_REG ); PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME); @@ -559,6 +565,10 @@ again: /* we have a packet address, so tell the card to use it */ SMC_outb (packet_no, PN_REG); + /* do not write new ptr value if Write data fifo not empty */ + while ( saved_ptr & PTR_NOTEMPTY ) + printf ("Write data fifo not empty!\n"); + /* point to the beginning of the packet */ SMC_outw (PTR_AUTOINC, PTR_REG); @@ -607,12 +617,15 @@ again: SMC_outw (MC_ENQUEUE, MMU_CMD_REG); /* poll for TX INT */ - if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { + /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */ + /* poll for TX_EMPTY INT - autorelease enabled */ + if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) { /* sending failed */ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME); /* release packet */ - SMC_outw (MC_FREEPKT, MMU_CMD_REG); + /* no need to release, MMU does that now */ + /* SMC_outw (MC_FREEPKT, MMU_CMD_REG); */ /* wait for MMU getting ready (low) */ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { @@ -625,12 +638,14 @@ again: return 0; } else { /* ack. int */ - SMC_outb (IM_TX_INT, SMC91111_INT_REG); + SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG); + /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length); /* release packet */ - SMC_outw (MC_FREEPKT, MMU_CMD_REG); + /* no need to release, MMU does that now */ + /* SMC_outw (MC_FREEPKT, MMU_CMD_REG); */ /* wait for MMU getting ready (low) */ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { @@ -642,6 +657,10 @@ again: } + /* restore previously saved registers */ + SMC_outb( saved_pnr, PN_REG ); + SMC_outw( saved_ptr, PTR_REG ); + return length; } @@ -730,8 +749,14 @@ static int smc_rcv() #ifdef USE_32_BIT dword stat_len; #endif + byte saved_pnr; + word saved_ptr; SMC_SELECT_BANK(2); + /* save PTR and PTR registers */ + saved_pnr = SMC_inb( PN_REG ); + saved_ptr = SMC_inw( PTR_REG ); + packet_number = SMC_inw( RXFIFO_REG ); if ( packet_number & RXFIFO_REMPTY ) { @@ -810,6 +835,10 @@ static int smc_rcv() while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) udelay(1); /* Wait until not busy */ + /* restore saved registers */ + SMC_outb( saved_pnr, PN_REG ); + SMC_outw( saved_ptr, PTR_REG ); + if (!is_error) { /* Pass the packet up to the protocol layers. */ NetReceive(NetRxPackets[0], packet_length); @@ -1252,6 +1281,11 @@ static void smc_phy_configure () /* Update our Auto-Neg Advertisement Register */ smc_write_phy_register (PHY_AD_REG, my_ad_caps); + /* Read the register back. Without this, it appears that when */ + /* auto-negotiation is restarted, sometimes it isn't ready and */ + /* the link does not come up. */ + smc_read_phy_register(PHY_AD_REG); + PRINTK2 ("%s:phy caps=%x\n", SMC_DEV_NAME, my_phy_caps); PRINTK2 ("%s:phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps); |