summaryrefslogtreecommitdiff
path: root/drivers/sk98lin/skgeinit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sk98lin/skgeinit.c')
-rw-r--r--drivers/sk98lin/skgeinit.c2366
1 files changed, 2366 insertions, 0 deletions
diff --git a/drivers/sk98lin/skgeinit.c b/drivers/sk98lin/skgeinit.c
new file mode 100644
index 0000000..42a6424
--- /dev/null
+++ b/drivers/sk98lin/skgeinit.c
@@ -0,0 +1,2366 @@
+/******************************************************************************
+ *
+ * Name: skgeinit.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.85 $
+ * Date: $Date: 2003/02/05 15:30:33 $
+ * Purpose: Contains functions to initialize the GE HW
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgeinit.c,v $
+ * Revision 1.85 2003/02/05 15:30:33 rschmidt
+ * Corrected setting of GIHstClkFact (Host Clock Factor) and
+ * GIPollTimerVal (Descr. Poll Timer Init Value) for YUKON.
+ * Editorial changes.
+ *
+ * Revision 1.84 2003/01/28 09:57:25 rschmidt
+ * Added detection of YUKON-Lite Rev. A0 (stored in GIYukonLite).
+ * Disabled Rx GMAC FIFO Flush for YUKON-Lite Rev. A0.
+ * Added support for CLK_RUN (YUKON-Lite).
+ * Added additional check of PME from D3cold for setting GIVauxAvail.
+ * Editorial changes.
+ *
+ * Revision 1.83 2002/12/17 16:15:41 rschmidt
+ * Added default setting of PhyType (Copper) for YUKON.
+ * Added define around check for HW self test results.
+ * Editorial changes.
+ *
+ * Revision 1.82 2002/12/05 13:40:21 rschmidt
+ * Added setting of Rx GMAC FIFO Flush Mask register.
+ * Corrected PhyType with new define SK_PHY_MARV_FIBER when
+ * YUKON Fiber board was found.
+ * Editorial changes.
+ *
+ * Revision 1.81 2002/11/15 12:48:35 rschmidt
+ * Replaced message SKERR_HWI_E018 with SKERR_HWI_E024 for Rx queue error
+ * in SkGeStopPort().
+ * Added init for pAC->GIni.GIGenesis with SK_FALSE in YUKON-branch.
+ * Editorial changes.
+ *
+ * Revision 1.80 2002/11/12 17:28:30 rschmidt
+ * Initialized GIPciSlot64 and GIPciClock66 in SkGeInit1().
+ * Reduced PCI FIFO watermarks for 32bit/33MHz bus in SkGeInitBmu().
+ * Editorial changes.
+ *
+ * Revision 1.79 2002/10/21 09:31:02 mkarl
+ * Changed SkGeInitAssignRamToQueues(), removed call to
+ * SkGeInitAssignRamToQueues in SkGeInit1 and fixed compiler warning in
+ * SkGeInit1.
+ *
+ * Revision 1.78 2002/10/16 15:55:07 mkarl
+ * Fixed a bug in SkGeInitAssignRamToQueues.
+ *
+ * Revision 1.77 2002/10/14 15:07:22 rschmidt
+ * Corrected timeout handling for Rx queue in SkGeStopPort() (#10748)
+ * Editorial changes.
+ *
+ * Revision 1.76 2002/10/11 09:24:38 mkarl
+ * Added check for HW self test results.
+ *
+ * Revision 1.75 2002/10/09 16:56:44 mkarl
+ * Now call SkGeInitAssignRamToQueues() in Init Level 1 in order to assign
+ * the adapter memory to the queues. This default assignment is not suitable
+ * for dual net mode.
+ *
+ * Revision 1.74 2002/09/12 08:45:06 rwahl
+ * Set defaults for PMSCap, PLinkSpeed & PLinkSpeedCap dependent on PHY.
+ *
+ * Revision 1.73 2002/08/16 15:19:45 rschmidt
+ * Corrected check for Tx queues in SkGeCheckQSize().
+ * Added init for new entry GIGenesis and GICopperType
+ * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
+ * Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros.
+ *
+ * Revision 1.72 2002/08/12 13:38:55 rschmidt
+ * Added check if VAUX is available (stored in GIVauxAvail)
+ * Initialized PLinkSpeedCap in Port struct with SK_LSPEED_CAP_1000MBPS
+ * Editorial changes.
+ *
+ * Revision 1.71 2002/08/08 16:32:58 rschmidt
+ * Added check for Tx queues in SkGeCheckQSize().
+ * Added start of Time Stamp Timer (YUKON) in SkGeInit2().
+ * Editorial changes.
+ *
+ * Revision 1.70 2002/07/23 16:04:26 rschmidt
+ * Added init for GIWolOffs (HW-Bug in YUKON 1st rev.)
+ * Minor changes
+ *
+ * Revision 1.69 2002/07/17 17:07:08 rwahl
+ * - SkGeInit1(): fixed PHY type debug output; corrected init of GIFunc
+ * table & GIMacType.
+ * - Editorial changes.
+ *
+ * Revision 1.68 2002/07/15 18:38:31 rwahl
+ * Added initialization for MAC type dependent function table.
+ *
+ * Revision 1.67 2002/07/15 15:45:39 rschmidt
+ * Added Tx Store & Forward for YUKON (GMAC Tx FIFO is only 1 kB)
+ * Replaced SK_PHY_MARV by SK_PHY_MARV_COPPER
+ * Editorial changes
+ *
+ * Revision 1.66 2002/06/10 09:35:08 rschmidt
+ * Replaced C++ comments (//)
+ * Editorial changes
+ *
+ * Revision 1.65 2002/06/05 08:33:37 rschmidt
+ * Changed GIRamSize and Reset sequence for YUKON.
+ * SkMacInit() replaced by SkXmInitMac() resp. SkGmInitMac()
+ *
+ * Revision 1.64 2002/04/25 13:03:20 rschmidt
+ * Changes for handling YUKON.
+ * Removed reference to xmac_ii.h (not necessary).
+ * Moved all defines into header file.
+ * Replaced all SkXm...() functions with SkMac...() to handle also
+ * YUKON's GMAC.
+ * Added handling for GMAC FIFO in SkGeInitMacFifo(), SkGeStopPort().
+ * Removed 'goto'-directive from SkGeCfgSync(), SkGeCheckQSize().
+ * Replaced all XMAC-access macros by functions: SkMacRxTxDisable(),
+ * SkMacFlushTxFifo().
+ * Optimized timeout handling in SkGeStopPort().
+ * Initialized PLinkSpeed in Port struct with SK_LSPEED_AUTO.
+ * Release of GMAC Link Control reset in SkGeInit1().
+ * Initialized GIChipId and GIChipRev in GE Init structure.
+ * Added GIRamSize and PhyType values for YUKON.
+ * Removed use of PRxCmd to setup XMAC.
+ * Moved setting of XM_RX_DIS_CEXT to SkXmInitMac().
+ * Use of SkGeXmitLED() only for GENESIS.
+ * Changes for V-CPU support.
+ * Editorial changes.
+ *
+ * Revision 1.63 2001/04/05 11:02:09 rassmann
+ * Stop Port check of the STOP bit did not take 2/18 sec as wanted.
+ *
+ * Revision 1.62 2001/02/07 07:54:21 rassmann
+ * Corrected copyright.
+ *
+ * Revision 1.61 2001/01/31 15:31:40 gklug
+ * fix: problem with autosensing an SR8800 switch
+ *
+ * Revision 1.60 2000/10/18 12:22:21 cgoos
+ * Added workaround for half duplex hangup.
+ *
+ * Revision 1.59 2000/10/10 11:22:06 gklug
+ * add: in manual half duplex mode ignore carrier extension errors
+ *
+ * Revision 1.58 2000/10/02 14:10:27 rassmann
+ * Reading BCOM PHY after releasing reset until it returns a valid value.
+ *
+ * Revision 1.57 2000/08/03 14:55:28 rassmann
+ * Waiting for I2C to be ready before de-initializing adapter
+ * (prevents sensors from hanging up).
+ *
+ * Revision 1.56 2000/07/27 12:16:48 gklug
+ * fix: Stop Port check of the STOP bit does now take 2/18 sec as wanted
+ *
+ * Revision 1.55 1999/11/22 13:32:26 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.54 1999/10/26 07:32:54 malthoff
+ * Initialize PHWLinkUp with SK_FALSE. Required for Diagnostics.
+ *
+ * Revision 1.53 1999/08/12 19:13:50 malthoff
+ * Fix for 1000BT. Do not owerwrite XM_MMU_CMD when
+ * disabling receiver and transmitter. Other bits
+ * may be lost.
+ *
+ * Revision 1.52 1999/07/01 09:29:54 gklug
+ * fix: DoInitRamQueue needs pAC
+ *
+ * Revision 1.51 1999/07/01 08:42:21 gklug
+ * chg: use Store & forward for RAM buffer when Jumbos are used
+ *
+ * Revision 1.50 1999/05/27 13:19:38 cgoos
+ * Added Tx PCI watermark initialization.
+ * Removed Tx RAM queue Store & Forward setting.
+ *
+ * Revision 1.49 1999/05/20 14:32:45 malthoff
+ * SkGeLinkLED() is completly removed now.
+ *
+ * Revision 1.48 1999/05/19 07:28:24 cgoos
+ * SkGeLinkLED no more available for drivers.
+ * Changes for 1000Base-T.
+ *
+ * Revision 1.47 1999/04/08 13:57:45 gklug
+ * add: Init of new port struct fiels PLinkResCt
+ * chg: StopPort Timer check
+ *
+ * Revision 1.46 1999/03/25 07:42:15 malthoff
+ * SkGeStopPort(): Add workaround for cache incoherency.
+ * Create error log entry, disable port, and
+ * exit loop if it does not terminate.
+ * Add XM_RX_LENERR_OK to the default value for the
+ * XMAC receive command register.
+ *
+ * Revision 1.45 1999/03/12 16:24:47 malthoff
+ * Remove PPollRxD and PPollTxD.
+ * Add check for GIPollTimerVal.
+ *
+ * Revision 1.44 1999/03/12 13:40:23 malthoff
+ * Fix: SkGeXmitLED(), SK_LED_TST mode does not work.
+ * Add: Jumbo frame support.
+ * Chg: Resolution of parameter IntTime in SkGeCfgSync().
+ *
+ * Revision 1.43 1999/02/09 10:29:46 malthoff
+ * Bugfix: The previous modification again also for the second location.
+ *
+ * Revision 1.42 1999/02/09 09:35:16 malthoff
+ * Bugfix: The bits '66 MHz Capable' and 'NEWCAP are reset while
+ * clearing the error bits in the PCI status register.
+ *
+ * Revision 1.41 1999/01/18 13:07:02 malthoff
+ * Bugfix: Do not use CFG cycles after during Init- or Runtime, because
+ * they may not be available after Boottime.
+ *
+ * Revision 1.40 1999/01/11 12:40:49 malthoff
+ * Bug fix: PCI_STATUS: clearing error bits sets the UDF bit.
+ *
+ * Revision 1.39 1998/12/11 15:17:33 gklug
+ * chg: Init LipaAutoNeg with Unknown
+ *
+ * Revision 1.38 1998/12/10 11:02:57 malthoff
+ * Disable Error Log Message when calling SkGeInit(level 2)
+ * more than once.
+ *
+ * Revision 1.37 1998/12/07 12:18:25 gklug
+ * add: refinement of autosense mode: take into account the autoneg cap of LiPa
+ *
+ * Revision 1.36 1998/12/07 07:10:39 gklug
+ * fix: init values of LinkBroken/ Capabilities for management
+ *
+ * Revision 1.35 1998/12/02 10:56:20 gklug
+ * fix: do NOT init LoinkSync Counter.
+ *
+ * Revision 1.34 1998/12/01 10:53:21 gklug
+ * add: init of additional Counters for workaround
+ *
+ * Revision 1.33 1998/12/01 10:00:49 gklug
+ * add: init PIsave var in Port struct
+ *
+ * Revision 1.32 1998/11/26 14:50:40 gklug
+ * chg: Default is autosensing with AUTOFULL mode
+ *
+ * Revision 1.31 1998/11/25 15:36:16 gklug
+ * fix: do NOT stop LED Timer when port should be stopped
+ *
+ * Revision 1.30 1998/11/24 13:15:28 gklug
+ * add: Init PCkeckPar struct member
+ *
+ * Revision 1.29 1998/11/18 13:19:27 malthoff
+ * Disable packet arbiter timeouts on receive side.
+ * Use maximum timeout value for packet arbiter
+ * transmit timeouts.
+ * Add TestStopBit() function to handle stop RX/TX
+ * problem with active descriptor poll timers.
+ * Bug Fix: Descriptor Poll Timer not started, because
+ * GIPollTimerVal was initialized with 0.
+ *
+ * Revision 1.28 1998/11/13 14:24:26 malthoff
+ * Bug Fix: SkGeStopPort() may hang if a Packet Arbiter Timout
+ * is pending or occurs while waiting for TX_STOP and RX_STOP.
+ * The PA timeout is cleared now while waiting for TX- or RX_STOP.
+ *
+ * Revision 1.27 1998/11/02 11:04:36 malthoff
+ * fix the last fix
+ *
+ * Revision 1.26 1998/11/02 10:37:03 malthoff
+ * Fix: SkGePollTxD() enables always the synchronounous poll timer.
+ *
+ * Revision 1.25 1998/10/28 07:12:43 cgoos
+ * Fixed "LED_STOP" in SkGeLnkSyncCnt, "== SK_INIT_IO" in SkGeInit.
+ * Removed: Reset of RAM Interface in SkGeStopPort.
+ *
+ * Revision 1.24 1998/10/27 08:13:12 malthoff
+ * Remove temporary code.
+ *
+ * Revision 1.23 1998/10/26 07:45:03 malthoff
+ * Add Address Calculation Workaround: If the EPROM byte
+ * Id is 3, the address offset is 512 kB.
+ * Initialize default values for PLinkMode and PFlowCtrlMode.
+ *
+ * Revision 1.22 1998/10/22 09:46:47 gklug
+ * fix SysKonnectFileId typo
+ *
+ * Revision 1.21 1998/10/20 12:11:56 malthoff
+ * Don't dendy the Queue config if the size of the unused
+ * Rx qeueu is zero.
+ *
+ * Revision 1.20 1998/10/19 07:27:58 malthoff
+ * SkGeInitRamIface() is public to be called by diagnostics.
+ *
+ * Revision 1.19 1998/10/16 13:33:45 malthoff
+ * Fix: enabling descriptor polling is not allowed until
+ * the descriptor addresses are set. Descriptor polling
+ * must be handled by the driver.
+ *
+ * Revision 1.18 1998/10/16 10:58:27 malthoff
+ * Remove temp. code for Diag prototype.
+ * Remove lint warning for dummy reads.
+ * Call SkGeLoadLnkSyncCnt() during SkGeInitPort().
+ *
+ * Revision 1.17 1998/10/14 09:16:06 malthoff
+ * Change parameter LimCount and programming of
+ * the limit counter in SkGeCfgSync().
+ *
+ * Revision 1.16 1998/10/13 09:21:16 malthoff
+ * Don't set XM_RX_SELF_RX in RxCmd Reg, because it's
+ * like a Loopback Mode in half duplex.
+ *
+ * Revision 1.15 1998/10/09 06:47:40 malthoff
+ * SkGeInitMacArb(): set recovery counters init value
+ * to zero although this counters are not uesd.
+ * Bug fix in Rx Upper/Lower Pause Threshold calculation.
+ * Add XM_RX_SELF_RX to RxCmd.
+ *
+ * Revision 1.14 1998/10/06 15:15:53 malthoff
+ * Make sure no pending IRQ is cleared in SkGeLoadLnkSyncCnt().
+ *
+ * Revision 1.13 1998/10/06 14:09:36 malthoff
+ * Add SkGeLoadLnkSyncCnt(). Modify
+ * the 'port stopped' condition according
+ * to the current problem report.
+ *
+ * Revision 1.12 1998/10/05 08:17:21 malthoff
+ * Add functions: SkGePollRxD(), SkGePollTxD(),
+ * DoCalcAddr(), SkGeCheckQSize(),
+ * DoInitRamQueue(), and SkGeCfgSync().
+ * Add coding for SkGeInitMacArb(), SkGeInitPktArb(),
+ * SkGeInitMacFifo(), SkGeInitRamBufs(),
+ * SkGeInitRamIface(), and SkGeInitBmu().
+ *
+ * Revision 1.11 1998/09/29 08:26:29 malthoff
+ * bug fix: SkGeInit0() 'i' should be increment.
+ *
+ * Revision 1.10 1998/09/28 13:19:01 malthoff
+ * Coding time: Save the done work.
+ * Modify SkGeLinkLED(), add SkGeXmitLED(),
+ * define SkGeCheckQSize(), SkGeInitMacArb(),
+ * SkGeInitPktArb(), SkGeInitMacFifo(),
+ * SkGeInitRamBufs(), SkGeInitRamIface(),
+ * and SkGeInitBmu(). Do coding for SkGeStopPort(),
+ * SkGeInit1(), SkGeInit2(), and SkGeInit3().
+ * Do coding for SkGeDinit() and SkGeInitPort().
+ *
+ * Revision 1.9 1998/09/16 14:29:05 malthoff
+ * Some minor changes.
+ *
+ * Revision 1.8 1998/09/11 05:29:14 gklug
+ * add: init state of a port
+ *
+ * Revision 1.7 1998/09/04 09:26:25 malthoff
+ * Short temporary modification.
+ *
+ * Revision 1.6 1998/09/04 08:27:59 malthoff
+ * Remark the do-while in StopPort() because it never ends
+ * without a GE adapter.
+ *
+ * Revision 1.5 1998/09/03 14:05:45 malthoff
+ * Change comment for SkGeInitPort(). Do not
+ * repair the queue sizes if invalid.
+ *
+ * Revision 1.4 1998/09/03 10:03:19 malthoff
+ * Implement the new interface according to the
+ * reviewed interface specification.
+ *
+ * Revision 1.3 1998/08/19 09:11:25 gklug
+ * fix: struct are removed from c-source (see CCC)
+ *
+ * Revision 1.2 1998/07/28 12:33:58 malthoff
+ * Add 'IoC' parameter in function declaration and SK IO macros.
+ *
+ * Revision 1.1 1998/07/23 09:48:57 malthoff
+ * Creation. First dummy 'C' file.
+ * SkGeInit(Level 0) is card_start for GE.
+ * SkGeDeInit() is card_stop for GE.
+ *
+ *
+ ******************************************************************************/
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* global variables ***********************************************************/
+
+/* local variables ************************************************************/
+
+static const char SysKonnectFileId[] =
+ "@(#)$Id: skgeinit.c,v 1.85 2003/02/05 15:30:33 rschmidt Exp $ (C) SK ";
+
+struct s_QOffTab {
+ int RxQOff; /* Receive Queue Address Offset */
+ int XsQOff; /* Sync Tx Queue Address Offset */
+ int XaQOff; /* Async Tx Queue Address Offset */
+};
+static struct s_QOffTab QOffTab[] = {
+ {Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
+};
+
+
+/******************************************************************************
+ *
+ * SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring
+ *
+ * Description:
+ * Enable or disable the descriptor polling of the receive descriptor
+ * ring (RxD) for port 'Port'.
+ * The new configuration is *not* saved over any SkGeStopPort() and
+ * SkGeInitPort() calls.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGePollRxD(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL PollRxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ?
+ CSR_ENA_POL : CSR_DIS_POL);
+} /* SkGePollRxD */
+
+
+/******************************************************************************
+ *
+ * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
+ *
+ * Description:
+ * Enable or disable the descriptor polling of the transmit descriptor
+ * ring(s) (TxD) for port 'Port'.
+ * The new configuration is *not* saved over any SkGeStopPort() and
+ * SkGeInitPort() calls.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGePollTxD(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
+{
+ SK_GEPORT *pPrt;
+ SK_U32 DWord;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ DWord = (PollTxD) ? CSR_ENA_POL : CSR_DIS_POL;
+
+ if (pPrt->PXSQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
+ }
+
+ if (pPrt->PXAQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
+ }
+} /* SkGePollTxD */
+
+
+/******************************************************************************
+ *
+ * SkGeYellowLED() - Switch the yellow LED on or off.
+ *
+ * Description:
+ * Switch the yellow LED on or off.
+ *
+ * Note:
+ * This function may be called any time after SkGeInit(Level 1).
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeYellowLED(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int State) /* yellow LED state, 0 = OFF, 0 != ON */
+{
+ if (State == 0) {
+ /* Switch yellow LED OFF */
+ SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
+ }
+ else {
+ /* Switch yellow LED ON */
+ SK_OUT8(IoC, B0_LED, LED_STAT_ON);
+ }
+} /* SkGeYellowLED */
+
+
+/******************************************************************************
+ *
+ * SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
+ *
+ * Description:
+ * The Rx or Tx LED which is specified by 'Led' will be
+ * enabled, disabled or switched on in test mode.
+ *
+ * Note:
+ * 'Led' must contain the address offset of the LEDs INI register.
+ *
+ * Usage:
+ * SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeXmitLED(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Led, /* offset to the LED Init Value register */
+int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
+{
+ SK_U32 LedIni;
+
+ switch (Mode) {
+ case SK_LED_ENA:
+ LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+ SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
+ SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
+ break;
+ case SK_LED_TST:
+ SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
+ SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
+ SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
+ break;
+ case SK_LED_DIS:
+ default:
+ /*
+ * Do NOT stop the LED Timer here. The LED might be
+ * in on state. But it needs to go off.
+ */
+ SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
+ SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
+ break;
+ }
+
+ /*
+ * 1000BT: The Transmit LED is driven by the PHY.
+ * But the default LED configuration is used for
+ * Level One and Broadcom PHYs.
+ * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
+ * (In this case it has to be added here. But we will see. XXX)
+ */
+} /* SkGeXmitLED */
+
+
+/******************************************************************************
+ *
+ * DoCalcAddr() - Calculates the start and the end address of a queue.
+ *
+ * Description:
+ * This function calculates the start and the end address of a queue.
+ * Afterwards the 'StartVal' is incremented to the next start position.
+ * If the port is already initialized the calculated values
+ * will be checked against the configured values and an
+ * error will be returned, if they are not equal.
+ * If the port is not initialized the values will be written to
+ * *StartAdr and *EndAddr.
+ *
+ * Returns:
+ * 0: success
+ * 1: configuration error
+ */
+static int DoCalcAddr(
+SK_AC *pAC, /* adapter context */
+SK_GEPORT *pPrt, /* port index */
+int QuSize, /* size of the queue to configure in kB */
+SK_U32 *StartVal, /* start value for address calculation */
+SK_U32 *QuStartAddr, /* start addr to calculate */
+SK_U32 *QuEndAddr) /* end address to calculate */
+{
+ SK_U32 EndVal;
+ SK_U32 NextStart;
+ int Rtv;
+
+ Rtv = 0;
+ if (QuSize == 0) {
+ EndVal = *StartVal;
+ NextStart = EndVal;
+ }
+ else {
+ EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
+ NextStart = EndVal + 1;
+ }
+
+ if (pPrt->PState >= SK_PRT_INIT) {
+ if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
+ Rtv = 1;
+ }
+ }
+ else {
+ *QuStartAddr = *StartVal;
+ *QuEndAddr = EndVal;
+ }
+
+ *StartVal = NextStart;
+ return(Rtv);
+} /* DoCalcAddr */
+
+/******************************************************************************
+ *
+ * SkGeInitAssignRamToQueues() - allocate default queue sizes
+ *
+ * Description:
+ * This function assigns the memory to the different queues and ports.
+ * When DualNet is set to SK_TRUE all ports get the same amount of memory.
+ * Otherwise the first port gets most of the memory and all the
+ * other ports just the required minimum.
+ * This function can only be called when pAC->GIni.GIRamSize and
+ * pAC->GIni.GIMacsFound have been initialized, usually this happens
+ * at init level 1
+ *
+ * Returns:
+ * 0 - ok
+ * 1 - invalid input values
+ * 2 - not enough memory
+ */
+
+int SkGeInitAssignRamToQueues(
+SK_AC *pAC, /* Adapter context */
+int ActivePort, /* Active Port in RLMT mode */
+SK_BOOL DualNet) /* adapter context */
+{
+ int i;
+ int UsedKilobytes; /* memory already assigned */
+ int ActivePortKilobytes; /* memory available for active port */
+ SK_GEPORT *pGePort;
+
+ UsedKilobytes = 0;
+
+ if (ActivePort >= pAC->GIni.GIMacsFound) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
+ ActivePort));
+ return(1);
+ }
+ if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
+ ((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
+ pAC->GIni.GIRamSize));
+ return(2);
+ }
+
+
+ if (DualNet) {
+ /* every port gets the same amount of memory */
+ ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ pGePort = &pAC->GIni.GP[i];
+
+ /* take away the minimum memory for active queues */
+ ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
+
+ /* receive queue gets the minimum + 80% of the rest */
+ pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
+ ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
+ + SK_MIN_RXQ_SIZE;
+
+ ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
+
+ /* synchronous transmit queue */
+ pGePort->PXSQSize = 0;
+
+ /* asynchronous transmit queue */
+ pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
+ SK_MIN_TXQ_SIZE);
+ }
+ }
+ else {
+ /* Rlmt Mode or single link adapter */
+
+ /* Set standby queue size defaults for all standby ports */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ if (i != ActivePort) {
+ pGePort = &pAC->GIni.GP[i];
+
+ pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
+ pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
+ pGePort->PXSQSize = 0;
+
+ /* Count used RAM */
+ UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
+ }
+ }
+ /* what's left? */
+ ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
+
+ /* assign it to the active port */
+ /* first take away the minimum memory */
+ ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
+ pGePort = &pAC->GIni.GP[ActivePort];
+
+ /* receive queue get's the minimum + 80% of the rest */
+ pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
+ (unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
+
+ ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
+
+ /* synchronous transmit queue */
+ pGePort->PXSQSize = 0;
+
+ /* asynchronous transmit queue */
+ pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
+ SK_MIN_TXQ_SIZE;
+ }
+#ifdef VCPU
+ VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
+ pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
+#endif /* VCPU */
+
+ return(0);
+} /* SkGeInitAssignRamToQueues */
+
+/******************************************************************************
+ *
+ * SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
+ *
+ * Description:
+ * This function verifies the Queue Size Configuration specified
+ * in the variables PRxQSize, PXSQSize, and PXAQSize of all
+ * used ports.
+ * This requirements must be fullfilled to have a valid configuration:
+ * - The size of all queues must not exceed GIRamSize.
+ * - The queue sizes must be specified in units of 8 kB.
+ * - The size of Rx queues of available ports must not be
+ * smaller than 16 kB.
+ * - The size of at least one Tx queue (synch. or asynch.)
+ * of available ports must not be smaller than 16 kB
+ * when Jumbo Frames are used.
+ * - The RAM start and end addresses must not be changed
+ * for ports which are already initialized.
+ * Furthermore SkGeCheckQSize() defines the Start and End Addresses
+ * of all ports and stores them into the HWAC port structure.
+ *
+ * Returns:
+ * 0: Queue Size Configuration valid
+ * 1: Queue Size Configuration invalid
+ */
+static int SkGeCheckQSize(
+SK_AC *pAC, /* adapter context */
+int Port) /* port index */
+{
+ SK_GEPORT *pPrt;
+ int UsedMem; /* total memory used (max. found ports) */
+ int i;
+ int Rtv;
+ int Rtv2;
+ SK_U32 StartAddr;
+
+ UsedMem = 0;
+ Rtv = 0;
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ pPrt = &pAC->GIni.GP[i];
+
+ if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
+ (pPrt->PXSQSize & QZ_UNITS) != 0 ||
+ (pPrt->PXAQSize & QZ_UNITS) != 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
+ return(1);
+ }
+
+ if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
+ return(1);
+ }
+
+ /*
+ * the size of at least one Tx queue (synch. or asynch.) has to be > 0.
+ * if Jumbo Frames are used, this size has to be >= 16 kB.
+ */
+ if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
+ (pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
+ ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
+ (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
+ return(1);
+ }
+
+ UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
+ }
+
+ if (UsedMem > pAC->GIni.GIRamSize) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
+ return(1);
+ }
+
+ /* Now start address calculation */
+ StartAddr = pAC->GIni.GIRamOffs;
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ pPrt = &pAC->GIni.GP[i];
+
+ /* Calculate/Check values for the receive queue */
+ Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
+ &pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
+ Rtv |= Rtv2;
+
+ /* Calculate/Check values for the synchronous Tx queue */
+ Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
+ &pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
+ Rtv |= Rtv2;
+
+ /* Calculate/Check values for the asynchronous Tx queue */
+ Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
+ &pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
+ Rtv |= Rtv2;
+
+ if (Rtv) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
+ return(1);
+ }
+ }
+
+ return(0);
+} /* SkGeCheckQSize */
+
+
+/******************************************************************************
+ *
+ * SkGeInitMacArb() - Initialize the MAC Arbiter
+ *
+ * Description:
+ * This function initializes the MAC Arbiter.
+ * It must not be called if there is still an
+ * initialized or active port.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitMacArb(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ /* release local reset */
+ SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
+
+ /* configure timeout values */
+ SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
+ SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
+ SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
+ SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
+
+ SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
+ SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
+ SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
+ SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
+
+ /* recovery values are needed for XMAC II Rev. B2 only */
+ /* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
+
+ /*
+ * There is no start or enable button to push, therefore
+ * the MAC arbiter is configured and enabled now.
+ */
+} /* SkGeInitMacArb */
+
+
+/******************************************************************************
+ *
+ * SkGeInitPktArb() - Initialize the Packet Arbiter
+ *
+ * Description:
+ * This function initializes the Packet Arbiter.
+ * It must not be called if there is still an
+ * initialized or active port.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitPktArb(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ /* release local reset */
+ SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
+
+ /* configure timeout values */
+ SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
+ SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
+ SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
+ SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
+
+ /*
+ * enable timeout timers if jumbo frames not used
+ * NOTE: the packet arbiter timeout interrupt is needed for
+ * half duplex hangup workaround
+ */
+ if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
+ if (pAC->GIni.GIMacsFound == 1) {
+ SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
+ }
+ else {
+ SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
+ }
+ }
+} /* SkGeInitPktArb */
+
+
+/******************************************************************************
+ *
+ * SkGeInitMacFifo() - Initialize the MAC FIFOs
+ *
+ * Description:
+ * Initialize all MAC FIFOs of the specified port
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitMacFifo(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U16 Word;
+#ifdef VCPU
+ SK_U32 DWord;
+#endif /* VCPU */
+ /*
+ * For each FIFO:
+ * - release local reset
+ * - use default value for MAC FIFO size
+ * - setup defaults for the control register
+ * - enable the FIFO
+ */
+
+ Word = GMF_RX_CTRL_DEF;
+
+ if (pAC->GIni.GIGenesis) {
+ /* Configure Rx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
+ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
+
+ /* Configure Tx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
+ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
+
+ /* Enable frame flushing if jumbo frames used */
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
+ }
+ }
+ else {
+ /* set Rx GMAC FIFO Flush Mask */
+ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
+
+ if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+
+ Word &= ~GMF_RX_F_FL_ON;
+ }
+
+ /* Configure Rx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
+
+ /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
+ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+
+ /* Configure Tx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
+
+#ifdef VCPU
+ SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
+ SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
+#endif /* VCPU */
+
+ /* set Tx GMAC FIFO Almost Empty Threshold */
+/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
+ }
+} /* SkGeInitMacFifo */
+
+
+/******************************************************************************
+ *
+ * SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
+ *
+ * Description:
+ * This function starts the Link Sync Counter of the specified
+ * port and enables the generation of an Link Sync IRQ.
+ * The Link Sync Counter may be used to detect an active link,
+ * if autonegotiation is not used.
+ *
+ * Note:
+ * o To ensure receiving the Link Sync Event the LinkSyncCounter
+ * should be initialized BEFORE clearing the XMAC's reset!
+ * o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
+ * function.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeLoadLnkSyncCnt(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U32 CntVal) /* Counter value */
+{
+ SK_U32 OrgIMsk;
+ SK_U32 NewIMsk;
+ SK_U32 ISrc;
+ SK_BOOL IrqPend;
+
+ /* stop counter */
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
+
+ /*
+ * ASIC problem:
+ * Each time starting the Link Sync Counter an IRQ is generated
+ * by the adapter. See problem report entry from 21.07.98
+ *
+ * Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ
+ * if no IRQ is already pending.
+ */
+ IrqPend = SK_FALSE;
+ SK_IN32(IoC, B0_ISRC, &ISrc);
+ SK_IN32(IoC, B0_IMSK, &OrgIMsk);
+ if (Port == MAC_1) {
+ NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
+ if ((ISrc & IS_LNK_SYNC_M1) != 0) {
+ IrqPend = SK_TRUE;
+ }
+ }
+ else {
+ NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
+ if ((ISrc & IS_LNK_SYNC_M2) != 0) {
+ IrqPend = SK_TRUE;
+ }
+ }
+ if (!IrqPend) {
+ SK_OUT32(IoC, B0_IMSK, NewIMsk);
+ }
+
+ /* load counter */
+ SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
+
+ /* start counter */
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
+
+ if (!IrqPend) {
+ /* clear the unexpected IRQ, and restore the interrupt mask */
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
+ SK_OUT32(IoC, B0_IMSK, OrgIMsk);
+ }
+} /* SkGeLoadLnkSyncCnt*/
+
+
+/******************************************************************************
+ *
+ * SkGeCfgSync() - Configure synchronous bandwidth for this port.
+ *
+ * Description:
+ * This function may be used to configure synchronous bandwidth
+ * to the specified port. This may be done any time after
+ * initializing the port. The configuration values are NOT saved
+ * in the HWAC port structure and will be overwritten any
+ * time when stopping and starting the port.
+ * Any values for the synchronous configuration will be ignored
+ * if the size of the synchronous queue is zero!
+ *
+ * The default configuration for the synchronous service is
+ * TXA_ENA_FSYNC. This means if the size of
+ * the synchronous queue is unequal zero but no specific
+ * synchronous bandwidth is configured, the synchronous queue
+ * will always have the 'unlimited' transmit priority!
+ *
+ * This mode will be restored if the synchronous bandwidth is
+ * deallocated ('IntTime' = 0 and 'LimCount' = 0).
+ *
+ * Returns:
+ * 0: success
+ * 1: parameter configuration error
+ * 2: try to configure quality of service although no
+ * synchronous queue is configured
+ */
+int SkGeCfgSync(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U32 IntTime, /* Interval Timer Value in units of 8ns */
+SK_U32 LimCount, /* Number of bytes to transfer during IntTime */
+int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
+{
+ int Rtv;
+
+ Rtv = 0;
+
+ /* check the parameters */
+ if (LimCount > IntTime ||
+ (LimCount == 0 && IntTime != 0) ||
+ (LimCount != 0 && IntTime == 0)) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
+ return(1);
+ }
+
+ if (pAC->GIni.GP[Port].PXSQSize == 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
+ return(2);
+ }
+
+ /* calculate register values */
+ IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
+ LimCount = LimCount / 8;
+
+ if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
+ return(1);
+ }
+
+ /*
+ * - Enable 'Force Sync' to ensure the synchronous queue
+ * has the priority while configuring the new values.
+ * - Also 'disable alloc' to ensure the settings complies
+ * to the SyncMode parameter.
+ * - Disable 'Rate Control' to configure the new values.
+ * - write IntTime and LimCount
+ * - start 'Rate Control' and disable 'Force Sync'
+ * if Interval Timer or Limit Counter not zero.
+ */
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+ TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
+
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+ (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
+
+ if (IntTime != 0 || LimCount != 0) {
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
+ }
+
+ return(0);
+} /* SkGeCfgSync */
+
+
+/******************************************************************************
+ *
+ * DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
+ *
+ * Desccription:
+ * If the queue is used, enable and initialize it.
+ * Make sure the queue is still reset, if it is not used.
+ *
+ * Returns:
+ * nothing
+ */
+static void DoInitRamQueue(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int QuIoOffs, /* Queue IO Address Offset */
+SK_U32 QuStartAddr, /* Queue Start Address */
+SK_U32 QuEndAddr, /* Queue End Address */
+int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
+{
+ SK_U32 RxUpThresVal;
+ SK_U32 RxLoThresVal;
+
+ if (QuStartAddr != QuEndAddr) {
+ /* calculate thresholds, assume we have a big Rx queue */
+ RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
+ RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
+
+ /* build HW address format */
+ QuStartAddr = QuStartAddr / 8;
+ QuEndAddr = QuEndAddr / 8;
+
+ /* release local reset */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
+
+ /* configure addresses */
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
+
+ switch (QuType) {
+ case SK_RX_SRAM_Q:
+ /* configure threshold for small Rx Queue */
+ RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
+
+ /* continue with SK_RX_BRAM_Q */
+ case SK_RX_BRAM_Q:
+ /* write threshold for Rx Queue */
+
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
+
+ /* the high priority threshold not used */
+ break;
+ case SK_TX_RAM_Q:
+ /*
+ * Do NOT use Store & Forward under normal operation due to
+ * performance optimization (GENESIS only).
+ * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
+ * or YUKON is used ((GMAC Tx FIFO is only 1 kB)
+ * we NEED Store & Forward of the RAM buffer.
+ */
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
+ !pAC->GIni.GIGenesis) {
+ /* enable Store & Forward Mode for the Tx Side */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
+ }
+ break;
+ }
+
+ /* set queue operational */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
+ }
+ else {
+ /* ensure the queue is still disabled */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
+ }
+} /* DoInitRamQueue */
+
+
+/******************************************************************************
+ *
+ * SkGeInitRamBufs() - Initialize the RAM Buffer Queues
+ *
+ * Description:
+ * Initialize all RAM Buffer Queues of the specified port
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitRamBufs(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ int RxQType;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
+ RxQType = SK_RX_SRAM_Q; /* small Rx Queue */
+ }
+ else {
+ RxQType = SK_RX_BRAM_Q; /* big Rx Queue */
+ }
+
+ DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
+ pPrt->PRxQRamEnd, RxQType);
+
+ DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
+ pPrt->PXsQRamEnd, SK_TX_RAM_Q);
+
+ DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
+ pPrt->PXaQRamEnd, SK_TX_RAM_Q);
+
+} /* SkGeInitRamBufs */
+
+
+/******************************************************************************
+ *
+ * SkGeInitRamIface() - Initialize the RAM Interface
+ *
+ * Description:
+ * This function initializes the Adapters RAM Interface.
+ *
+ * Note:
+ * This function is used in the diagnostics.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeInitRamIface(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ /* release local reset */
+ SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
+
+ /* configure timeout values */
+ SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
+
+} /* SkGeInitRamIface */
+
+
+/******************************************************************************
+ *
+ * SkGeInitBmu() - Initialize the BMU state machines
+ *
+ * Description:
+ * Initialize all BMU state machines of the specified port
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitBmu(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U32 RxWm;
+ SK_U32 TxWm;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ RxWm = SK_BMU_RX_WM;
+ TxWm = SK_BMU_TX_WM;
+
+ if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
+ /* for better performance */
+ RxWm /= 2;
+ TxWm /= 2;
+ }
+
+ /* Rx Queue: Release all local resets and set the watermark */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
+
+ /*
+ * Tx Queue: Release all local resets if the queue is used !
+ * set watermark
+ */
+ if (pPrt->PXSQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
+ }
+
+ if (pPrt->PXAQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
+ }
+ /*
+ * Do NOT enable the descriptor poll timers here, because
+ * the descriptor addresses are not specified yet.
+ */
+} /* SkGeInitBmu */
+
+
+/******************************************************************************
+ *
+ * TestStopBit() - Test the stop bit of the queue
+ *
+ * Description:
+ * Stopping a queue is not as simple as it seems to be.
+ * If descriptor polling is enabled, it may happen
+ * that RX/TX stop is done and SV idle is NOT set.
+ * In this case we have to issue another stop command.
+ *
+ * Returns:
+ * The queues control status register
+ */
+static SK_U32 TestStopBit(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int QuIoOffs) /* Queue IO Address Offset */
+{
+ SK_U32 QuCsr; /* CSR contents */
+
+ SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
+
+ if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
+ /* Stop Descriptor overridden by start command */
+ SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
+
+ SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
+ }
+
+ return(QuCsr);
+} /* TestStopBit */
+
+
+/******************************************************************************
+ *
+ * SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
+ *
+ * Description:
+ * After calling this function the descriptor rings and Rx and Tx
+ * queues of this port may be reconfigured.
+ *
+ * It is possible to stop the receive and transmit path separate or
+ * both together.
+ *
+ * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC.
+ * The receive queue is still active and
+ * the pending Rx frames may be still transferred
+ * into the RxD.
+ * SK_STOP_RX Stop the receive path. The tansmit path
+ * has to be stopped once before.
+ * SK_STOP_ALL SK_STOP_TX + SK_STOP_RX
+ *
+ * RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive.
+ * SK_HARD_RST Resets the MAC and the PHY.
+ *
+ * Example:
+ * 1) A Link Down event was signaled for a port. Therefore the activity
+ * of this port should be stopped and a hardware reset should be issued
+ * to enable the workaround of XMAC errata #2. But the received frames
+ * should not be discarded.
+ * ...
+ * SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
+ * (transfer all pending Rx frames)
+ * SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
+ * ...
+ *
+ * 2) An event was issued which request the driver to switch
+ * the 'virtual active' link to an other already active port
+ * as soon as possible. The frames in the receive queue of this
+ * port may be lost. But the PHY must not be reset during this
+ * event.
+ * ...
+ * SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
+ * ...
+ *
+ * Extended Description:
+ * If SK_STOP_TX is set,
+ * o disable the MAC's receive and transmitter to prevent
+ * from sending incomplete frames
+ * o stop the port's transmit queues before terminating the
+ * BMUs to prevent from performing incomplete PCI cycles
+ * on the PCI bus
+ * - The network Rx and Tx activity and PCI Tx transfer is
+ * disabled now.
+ * o reset the MAC depending on the RstMode
+ * o Stop Interval Timer and Limit Counter of Tx Arbiter,
+ * also disable Force Sync bit and Enable Alloc bit.
+ * o perform a local reset of the port's Tx path
+ * - reset the PCI FIFO of the async Tx queue
+ * - reset the PCI FIFO of the sync Tx queue
+ * - reset the RAM Buffer async Tx queue
+ * - reset the RAM Buffer sync Tx queue
+ * - reset the MAC Tx FIFO
+ * o switch Link and Tx LED off, stop the LED counters
+ *
+ * If SK_STOP_RX is set,
+ * o stop the port's receive queue
+ * - The path data transfer activity is fully stopped now.
+ * o perform a local reset of the port's Rx path
+ * - reset the PCI FIFO of the Rx queue
+ * - reset the RAM Buffer receive queue
+ * - reset the MAC Rx FIFO
+ * o switch Rx LED off, stop the LED counter
+ *
+ * If all ports are stopped,
+ * o reset the RAM Interface.
+ *
+ * Notes:
+ * o This function may be called during the driver states RESET_PORT and
+ * SWITCH_PORT.
+ */
+void SkGeStopPort(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+int Port, /* port to stop (MAC_1 + n) */
+int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
+int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
+{
+#ifndef SK_DIAG
+ SK_EVPARA Para;
+#endif /* !SK_DIAG */
+ SK_GEPORT *pPrt;
+ SK_U32 DWord;
+ SK_U32 XsCsr;
+ SK_U32 XaCsr;
+ SK_U64 ToutStart;
+ int i;
+ int ToutCnt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if ((Dir & SK_STOP_TX) != 0) {
+ /* disable receiver and transmitter */
+ SkMacRxTxDisable(pAC, IoC, Port);
+
+ /* stop both transmit queues */
+ /*
+ * If the BMU is in the reset state CSR_STOP will terminate
+ * immediately.
+ */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
+
+ ToutStart = SkOsGetTime(pAC);
+ ToutCnt = 0;
+ do {
+ /*
+ * Clear packet arbiter timeout to make sure
+ * this loop will terminate.
+ */
+ SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_TX1 :
+ PA_CLR_TO_TX2);
+
+ /*
+ * If the transfer stucks at the MAC the STOP command will not
+ * terminate if we don't flush the XMAC's transmit FIFO !
+ */
+ SkMacFlushTxFifo(pAC, IoC, Port);
+
+ XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
+ XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
+
+ if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
+ /*
+ * Timeout of 1/18 second reached.
+ * This needs to be checked at 1/18 sec only.
+ */
+ ToutCnt++;
+ if (ToutCnt > 1) {
+ /* Might be a problem when the driver event handler
+ * calls StopPort again. XXX.
+ */
+
+ /* Fatal Error, Loop aborted */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
+ SKERR_HWI_E018MSG);
+#ifndef SK_DIAG
+ Para.Para64 = Port;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+#endif /* !SK_DIAG */
+ return;
+ }
+ /*
+ * Cache incoherency workaround: Assume a start command
+ * has been lost while sending the frame.
+ */
+ ToutStart = SkOsGetTime(pAC);
+
+ if ((XsCsr & CSR_STOP) != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
+ }
+ if ((XaCsr & CSR_STOP) != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
+ }
+ }
+
+ /*
+ * Because of the ASIC problem report entry from 21.08.1998 it is
+ * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
+ */
+ } while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
+ (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
+
+ /* Reset the MAC depending on the RstMode */
+ if (RstMode == SK_SOFT_RST) {
+ SkMacSoftRst(pAC, IoC, Port);
+ }
+ else {
+ SkMacHardRst(pAC, IoC, Port);
+ }
+
+ /* Disable Force Sync bit and Enable Alloc bit */
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
+
+ /* Perform a local reset of the port's Tx path */
+
+ /* Reset the PCI FIFO of the async Tx queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
+ /* Reset the PCI FIFO of the sync Tx queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
+ /* Reset the RAM Buffer async Tx queue */
+ SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
+ /* Reset the RAM Buffer sync Tx queue */
+ SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
+
+ /* Reset Tx MAC FIFO */
+ if (pAC->GIni.GIGenesis) {
+ /* Note: MFF_RST_SET does NOT reset the XMAC ! */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
+
+ /* switch Link and Tx LED off, stop the LED counters */
+ /* Link LED is switched off by the RLMT and the Diag itself */
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
+ }
+ else {
+ /* Reset TX MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
+ }
+ }
+
+ if ((Dir & SK_STOP_RX) != 0) {
+ /*
+ * The RX Stop Command will not terminate if no buffers
+ * are queued in the RxD ring. But it will always reach
+ * the Idle state. Therefore we can use this feature to
+ * stop the transfer of received packets.
+ */
+ /* stop the port's receive queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
+
+ i = 100;
+ do {
+ /*
+ * Clear packet arbiter timeout to make sure
+ * this loop will terminate
+ */
+ SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_RX1 :
+ PA_CLR_TO_RX2);
+
+ DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
+
+ /* timeout if i==0 (bug fix for #10748) */
+ if (--i == 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
+ SKERR_HWI_E024MSG);
+ break;
+ }
+ /*
+ * because of the ASIC problem report entry from 21.08.98
+ * it is required to wait until CSR_STOP is reset and
+ * CSR_SV_IDLE is set.
+ */
+ } while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
+
+ /* The path data transfer activity is fully stopped now */
+
+ /* Perform a local reset of the port's Rx path */
+
+ /* Reset the PCI FIFO of the Rx queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
+ /* Reset the RAM Buffer receive queue */
+ SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
+
+ /* Reset Rx MAC FIFO */
+ if (pAC->GIni.GIGenesis) {
+
+ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
+
+ /* switch Rx LED off, stop the LED counter */
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
+ }
+ else {
+ /* Reset Rx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
+ }
+ }
+} /* SkGeStopPort */
+
+
+/******************************************************************************
+ *
+ * SkGeInit0() - Level 0 Initialization
+ *
+ * Description:
+ * - Initialize the BMU address offsets
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInit0(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ int i;
+ SK_GEPORT *pPrt;
+
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ pPrt = &pAC->GIni.GP[i];
+
+ pPrt->PState = SK_PRT_RESET;
+ pPrt->PRxQOff = QOffTab[i].RxQOff;
+ pPrt->PXsQOff = QOffTab[i].XsQOff;
+ pPrt->PXaQOff = QOffTab[i].XaQOff;
+ pPrt->PCheckPar = SK_FALSE;
+ pPrt->PIsave = 0;
+ pPrt->PPrevShorts = 0;
+ pPrt->PLinkResCt = 0;
+ pPrt->PAutoNegTOCt = 0;
+ pPrt->PPrevRx = 0;
+ pPrt->PPrevFcs = 0;
+ pPrt->PRxLim = SK_DEF_RX_WA_LIM;
+ pPrt->PLinkMode = SK_LMODE_AUTOFULL;
+ pPrt->PLinkSpeedCap = SK_LSPEED_CAP_1000MBPS;
+ pPrt->PLinkSpeed = SK_LSPEED_1000MBPS;
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_UNKNOWN;
+ pPrt->PLinkModeConf = SK_LMODE_AUTOSENSE;
+ pPrt->PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
+ pPrt->PLinkBroken = SK_TRUE; /* See WA code */
+ pPrt->PLinkCap = (SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
+ SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
+ pPrt->PFlowCtrlCap = SK_FLOW_MODE_SYM_OR_REM;
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ pPrt->PMSCap = 0;
+ pPrt->PMSMode = SK_MS_MODE_AUTO;
+ pPrt->PMSStatus = SK_MS_STAT_UNSET;
+ pPrt->PAutoNegFail = SK_FALSE;
+ pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
+ pPrt->PHWLinkUp = SK_FALSE;
+ }
+
+ pAC->GIni.GIPortUsage = SK_RED_LINK;
+
+} /* SkGeInit0*/
+
+#ifdef SK_PCI_RESET
+
+/******************************************************************************
+ *
+ * SkGePciReset() - Reset PCI interface
+ *
+ * Description:
+ * o Read PCI configuration.
+ * o Change power state to 3.
+ * o Change power state to 0.
+ * o Restore PCI configuration.
+ *
+ * Returns:
+ * 0: Success.
+ * 1: Power state could not be changed to 3.
+ */
+static int SkGePciReset(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ int i;
+ SK_U16 PmCtlSts;
+ SK_U32 Bp1;
+ SK_U32 Bp2;
+ SK_U16 PciCmd;
+ SK_U8 Cls;
+ SK_U8 Lat;
+ SK_U8 ConfigSpace[PCI_CFG_SIZE];
+
+ /*
+ * Note: Switching to D3 state is like a software reset.
+ * Switching from D3 to D0 is a hardware reset.
+ * We have to save and restore the configuration space.
+ */
+ for (i = 0; i < PCI_CFG_SIZE; i++) {
+ SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]);
+ }
+
+ /* We know the RAM Interface Arbiter is enabled. */
+ SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3);
+ SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
+
+ if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) {
+ return(1);
+ }
+
+ /* Return to D0 state. */
+ SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0);
+
+ /* Check for D0 state. */
+ SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
+
+ if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) {
+ return(1);
+ }
+
+ /* Check PCI Config Registers. */
+ SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd);
+ SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls);
+ SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1);
+ SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2);
+ SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat);
+
+ if (PciCmd != 0 || Cls != 0 || (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1 ||
+ Lat != 0) {
+ return(1);
+ }
+
+ /* Restore PCI Config Space. */
+ for (i = 0; i < PCI_CFG_SIZE; i++) {
+ SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]);
+ }
+
+ return(0);
+} /* SkGePciReset */
+
+#endif /* SK_PCI_RESET */
+
+/******************************************************************************
+ *
+ * SkGeInit1() - Level 1 Initialization
+ *
+ * Description:
+ * o Do a software reset.
+ * o Clear all reset bits.
+ * o Verify that the detected hardware is present.
+ * Return an error if not.
+ * o Get the hardware configuration
+ * + Read the number of MACs/Ports.
+ * + Read the RAM size.
+ * + Read the PCI Revision Id.
+ * + Find out the adapters host clock speed
+ * + Read and check the PHY type
+ *
+ * Returns:
+ * 0: success
+ * 5: Unexpected PHY type detected
+ * 6: HW self test failed
+ */
+static int SkGeInit1(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ SK_U8 Byte;
+ SK_U16 Word;
+ SK_U16 CtrlStat;
+ SK_U32 FlashAddr;
+ int RetVal;
+ int i;
+
+ RetVal = 0;
+
+ /* save CLK_RUN bits (YUKON-Lite) */
+ SK_IN16(IoC, B0_CTST, &CtrlStat);
+
+#ifdef SK_PCI_RESET
+ (void)SkGePciReset(pAC, IoC);
+#endif /* SK_PCI_RESET */
+
+ /* do the SW-reset */
+ SK_OUT8(IoC, B0_CTST, CS_RST_SET);
+
+ /* release the SW-reset */
+ SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
+
+ /* reset all error bits in the PCI STATUS register */
+ /*
+ * Note: PCI Cfg cycles cannot be used, because they are not
+ * available on some platforms after 'boot time'.
+ */
+ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* release Master Reset */
+ SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
+
+#ifdef CLK_RUN
+ CtrlStat |= CS_CLK_RUN_ENA;
+#endif /* CLK_RUN */
+
+ /* restore CLK_RUN bits */
+ SK_OUT16(IoC, B0_CTST, CtrlStat &
+ (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA));
+
+ /* read Chip Identification Number */
+ SK_IN8(IoC, B2_CHIP_ID, &Byte);
+ pAC->GIni.GIChipId = Byte;
+
+ /* read number of MACs */
+ SK_IN8(IoC, B2_MAC_CFG, &Byte);
+ pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
+
+ /* get Chip Revision Number */
+ pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
+
+ /* get diff. PCI parameters */
+ SK_IN16(IoC, B0_CTST, &CtrlStat);
+
+ /* read the adapters RAM size */
+ SK_IN8(IoC, B2_E_0, &Byte);
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+
+ pAC->GIni.GIGenesis = SK_TRUE;
+
+ if (Byte == 3) {
+ /* special case: 4 x 64k x 36, offset = 0x80000 */
+ pAC->GIni.GIRamSize = 1024;
+ pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
+ }
+ else {
+ pAC->GIni.GIRamSize = (int)Byte * 512;
+ pAC->GIni.GIRamOffs = 0;
+ }
+ /* all GE adapters work with 53.125 MHz host clock */
+ pAC->GIni.GIHstClkFact = SK_FACT_53;
+
+ /* set Descr. Poll Timer Init Value to 250 ms */
+ pAC->GIni.GIPollTimerVal =
+ SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+ }
+ else {
+ pAC->GIni.GIGenesis = SK_FALSE;
+
+#ifndef VCPU
+ pAC->GIni.GIRamSize = (Byte == 0) ? 128 : (int)Byte * 4;
+#else
+ pAC->GIni.GIRamSize = 128;
+#endif
+ pAC->GIni.GIRamOffs = 0;
+
+ /* WA for chip Rev. A */
+ pAC->GIni.GIWolOffs = (pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
+
+ /* get PM Capabilities of PCI config space */
+ SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
+
+ /* check if VAUX is available */
+ if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
+ /* check also if PME from D3cold is set */
+ ((Word & PCI_PME_D3C_SUP) != 0)) {
+ /* set entry in GE init struct */
+ pAC->GIni.GIVauxAvail = SK_TRUE;
+ }
+
+ /* save Flash-Address Register */
+ SK_IN32(IoC, B2_FAR, &FlashAddr);
+
+ /* test Flash-Address Register */
+ SK_OUT8(IoC, B2_FAR + 3, 0xff);
+ SK_IN8(IoC, B2_FAR + 3, &Byte);
+
+ pAC->GIni.GIYukonLite = (SK_BOOL)(Byte != 0);
+
+ /* restore Flash-Address Register */
+ SK_OUT32(IoC, B2_FAR, FlashAddr);
+
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ /* set GMAC Link Control reset */
+ SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+
+ /* clear GMAC Link Control reset */
+ SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+ }
+ /* all YU chips work with 78.125 MHz host clock */
+ pAC->GIni.GIHstClkFact = SK_FACT_78;
+
+ pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */
+ }
+
+ /* check if 64-bit PCI Slot is present */
+ pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
+
+ /* check if 66 MHz PCI Clock is active */
+ pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
+
+ /* read PCI HW Revision Id. */
+ SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
+ pAC->GIni.GIPciHwRev = Byte;
+
+ /* read the PMD type */
+ SK_IN8(IoC, B2_PMD_TYP, &Byte);
+ pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
+
+ /* read the PHY type */
+ SK_IN8(IoC, B2_E_1, &Byte);
+
+ Byte &= 0x0f; /* the PHY type is stored in the lower nibble */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ if (pAC->GIni.GIGenesis) {
+ switch (Byte) {
+ case SK_PHY_XMAC:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
+ break;
+ case SK_PHY_BCOM:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
+ pAC->GIni.GP[i].PMSCap =
+ SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
+ break;
+ case SK_PHY_NAT:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
+ break;
+#endif /* OTHER_PHY */
+ default:
+ /* ERROR: unexpected PHY type detected */
+ RetVal = 5;
+ break;
+ }
+ }
+ else {
+ if (Byte == 0) {
+ /* if this field is not initialized */
+ Byte = SK_PHY_MARV_COPPER;
+ pAC->GIni.GICopperType = SK_TRUE;
+ }
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
+
+ if (pAC->GIni.GICopperType) {
+ pAC->GIni.GP[i].PLinkSpeedCap = SK_LSPEED_CAP_AUTO |
+ SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
+ SK_LSPEED_CAP_1000MBPS;
+ pAC->GIni.GP[i].PLinkSpeed = SK_LSPEED_AUTO;
+ pAC->GIni.GP[i].PMSCap =
+ SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
+ }
+ else {
+ Byte = SK_PHY_MARV_FIBER;
+ }
+ }
+
+ pAC->GIni.GP[i].PhyType = Byte;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("PHY type: %d PHY addr: %04x\n", Byte,
+ pAC->GIni.GP[i].PhyAddr));
+ }
+
+ /* get Mac Type & set function pointers dependent on */
+ if (pAC->GIni.GIGenesis) {
+ pAC->GIni.GIMacType = SK_MAC_XMAC;
+
+ pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats;
+ pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic;
+ pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter;
+ pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus;
+ }
+ else {
+ pAC->GIni.GIMacType = SK_MAC_GMAC;
+
+ pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats;
+ pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic;
+ pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter;
+ pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus;
+
+#ifdef SPECIAL_HANDLING
+ if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+ /* check HW self test result */
+ SK_IN8(IoC, B2_E_3, &Byte);
+ if ((Byte & B2_E3_RES_MASK) != 0) {
+ RetVal = 6;
+ }
+ }
+#endif
+ }
+ return(RetVal);
+} /* SkGeInit1 */
+
+
+/******************************************************************************
+ *
+ * SkGeInit2() - Level 2 Initialization
+ *
+ * Description:
+ * - start the Blink Source Counter
+ * - start the Descriptor Poll Timer
+ * - configure the MAC-Arbiter
+ * - configure the Packet-Arbiter
+ * - enable the Tx Arbiters
+ * - enable the RAM Interface Arbiter
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInit2(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ SK_U32 DWord;
+ int i;
+
+ /* start the Descriptor Poll Timer */
+ if (pAC->GIni.GIPollTimerVal != 0) {
+ if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
+ pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
+ }
+ SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
+ SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
+ }
+
+ if (pAC->GIni.GIGenesis) {
+ /* start the Blink Source Counter */
+ DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+
+ SK_OUT32(IoC, B2_BSC_INI, DWord);
+ SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
+
+ /*
+ * Configure the MAC Arbiter and the Packet Arbiter.
+ * They will be started once and never be stopped.
+ */
+ SkGeInitMacArb(pAC, IoC);
+
+ SkGeInitPktArb(pAC, IoC);
+ }
+ else {
+ /* start Time Stamp Timer */
+ SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
+ }
+
+ /* enable the Tx Arbiters */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
+ }
+
+ /* enable the RAM Interface Arbiter */
+ SkGeInitRamIface(pAC, IoC);
+
+} /* SkGeInit2 */
+
+/******************************************************************************
+ *
+ * SkGeInit() - Initialize the GE Adapter with the specified level.
+ *
+ * Description:
+ * Level 0: Initialize the Module structures.
+ * Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has
+ * to be set before calling this level.
+ *
+ * o Do a software reset.
+ * o Clear all reset bits.
+ * o Verify that the detected hardware is present.
+ * Return an error if not.
+ * o Get the hardware configuration
+ * + Set GIMacsFound with the number of MACs.
+ * + Store the RAM size in GIRamSize.
+ * + Save the PCI Revision ID in GIPciHwRev.
+ * o return an error
+ * if Number of MACs > SK_MAX_MACS
+ *
+ * After returning from Level 0 the adapter
+ * may be accessed with IO operations.
+ *
+ * Level 2: start the Blink Source Counter
+ *
+ * Returns:
+ * 0: success
+ * 1: Number of MACs exceeds SK_MAX_MACS (after level 1)
+ * 2: Adapter not present or not accessible
+ * 3: Illegal initialization level
+ * 4: Initialization Level 1 Call missing
+ * 5: Unexpected PHY type detected
+ * 6: HW self test failed
+ */
+int SkGeInit(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Level) /* initialization level */
+{
+ int RetVal; /* return value */
+ SK_U32 DWord;
+
+ RetVal = 0;
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("SkGeInit(Level %d)\n", Level));
+
+ switch (Level) {
+ case SK_INIT_DATA:
+ /* Initialization Level 0 */
+ SkGeInit0(pAC, IoC);
+ pAC->GIni.GILevel = SK_INIT_DATA;
+ break;
+
+ case SK_INIT_IO:
+ /* Initialization Level 1 */
+ RetVal = SkGeInit1(pAC, IoC);
+ if (RetVal != 0) {
+ break;
+ }
+
+ /* check if the adapter seems to be accessible */
+ SK_OUT32(IoC, B2_IRQM_INI, 0x11335577L);
+ SK_IN32(IoC, B2_IRQM_INI, &DWord);
+ SK_OUT32(IoC, B2_IRQM_INI, 0L);
+
+ if (DWord != 0x11335577L) {
+ RetVal = 2;
+ break;
+ }
+
+ /* check if the number of GIMacsFound matches SK_MAX_MACS */
+ if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
+ RetVal = 1;
+ break;
+ }
+
+ /* Level 1 successfully passed */
+ pAC->GIni.GILevel = SK_INIT_IO;
+ break;
+
+ case SK_INIT_RUN:
+ /* Initialization Level 2 */
+ if (pAC->GIni.GILevel != SK_INIT_IO) {
+#ifndef SK_DIAG
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
+#endif /* !SK_DIAG */
+ RetVal = 4;
+ break;
+ }
+ SkGeInit2(pAC, IoC);
+
+ /* Level 2 successfully passed */
+ pAC->GIni.GILevel = SK_INIT_RUN;
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
+ RetVal = 3;
+ break;
+ }
+
+ return(RetVal);
+} /* SkGeInit */
+
+
+/******************************************************************************
+ *
+ * SkGeDeInit() - Deinitialize the adapter
+ *
+ * Description:
+ * All ports of the adapter will be stopped if not already done.
+ * Do a software reset and switch off all LEDs.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeDeInit(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ int i;
+ SK_U16 Word;
+
+#ifndef VCPU
+ /* ensure I2C is ready */
+ SkI2cWaitIrq(pAC, IoC);
+#endif
+
+ /* stop all current transfer activity */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
+ pAC->GIni.GP[i].PState != SK_PRT_RESET) {
+
+ SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
+ }
+ }
+
+ /* Reset all bits in the PCI STATUS register */
+ /*
+ * Note: PCI Cfg cycles cannot be used, because they are not
+ * available on some platforms after 'boot time'.
+ */
+ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* do the reset, all LEDs are switched off now */
+ SK_OUT8(IoC, B0_CTST, CS_RST_SET);
+} /* SkGeDeInit */
+
+
+/******************************************************************************
+ *
+ * SkGeInitPort() Initialize the specified port.
+ *
+ * Description:
+ * PRxQSize, PXSQSize, and PXAQSize has to be
+ * configured for the specified port before calling this function.
+ * The descriptor rings has to be initialized too.
+ *
+ * o (Re)configure queues of the specified port.
+ * o configure the MAC of the specified port.
+ * o put ASIC and MAC(s) in operational mode.
+ * o initialize Rx/Tx and Sync LED
+ * o initialize RAM Buffers and MAC FIFOs
+ *
+ * The port is ready to connect when returning.
+ *
+ * Note:
+ * The MAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ * 0: success
+ * 1: Queue size initialization error. The configured values
+ * for PRxQSize, PXSQSize, or PXAQSize are invalid for one
+ * or more queues. The specified port was NOT initialized.
+ * An error log entry was generated.
+ * 2: The port has to be stopped before it can be initialized again.
+ */
+int SkGeInitPort(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port to configure */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (SkGeCheckQSize(pAC, Port) != 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
+ return(1);
+ }
+
+ if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
+ return(2);
+ }
+
+ /* configuration ok, initialize the Port now */
+
+ if (pAC->GIni.GIGenesis) {
+ /* initialize Rx, Tx and Link LED */
+ /*
+ * If 1000BT Phy needs LED initialization than swap
+ * LED and XMAC initialization order
+ */
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
+ /* The Link LED is initialized by RLMT or Diagnostics itself */
+
+ SkXmInitMac(pAC, IoC, Port);
+ }
+ else {
+
+ SkGmInitMac(pAC, IoC, Port);
+ }
+
+ /* do NOT initialize the Link Sync Counter */
+
+ SkGeInitMacFifo(pAC, IoC, Port);
+
+ SkGeInitRamBufs(pAC, IoC, Port);
+
+ if (pPrt->PXSQSize != 0) {
+ /* enable Force Sync bit if synchronous queue available */
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
+ }
+
+ SkGeInitBmu(pAC, IoC, Port);
+
+ /* mark port as initialized */
+ pPrt->PState = SK_PRT_INIT;
+
+ return(0);
+} /* SkGeInitPort */
generated by cgit v1.1 at 2024-11-29 11:33:49 +0000