diff options
Diffstat (limited to 'drivers/serial_pl010.c')
| -rw-r--r-- | drivers/serial_pl010.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/serial_pl010.c b/drivers/serial_pl010.c new file mode 100644 index 0000000..01b5f0a --- /dev/null +++ b/drivers/serial_pl010.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2000 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * (C) Copyright 2004 + * ARM Ltd. + * Philippe Robin, <philippe.robin@arm.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Simple U-Boot driver for the PrimeCell PL011 UARTs on the IntegratorCP */ +/* Should be fairly simple to make it work with the PL010 as well */ + +#include <common.h> + +#ifdef CFG_PL010_SERIAL + +#include "serial_pl011.h" + +#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val)) +#define IO_READ(addr) (*(volatile unsigned int *)(addr)) + +/* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 */ +#define NUM_PORTS 2 +#define CONSOLE_PORT CONFIG_CONS_INDEX +#define baudRate CONFIG_BAUDRATE +static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0), + (void*)(CFG_SERIAL1)}; + + +static void pl010_putc(int portnum, char c); +static int pl010_getc(int portnum); +static int pl010_tstc(int portnum); + + +int serial_init (void) +{ + unsigned int temp; + unsigned int divisor; + + /* + ** First, disable everything. + */ + IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, 0x0); + + /* + ** Set baud rate + ** + */ + switch (baudRate) { + case 9600: + divisor = UART_PL010_BAUD_9600; + break; + + case 19200: + divisor = UART_PL010_BAUD_9600; + break; + + case 38400: + divisor = UART_PL010_BAUD_38400; + break; + + case 57600: + divisor = UART_PL010_BAUD_57600; + break; + + case 115200: + divisor = UART_PL010_BAUD_115200; + break; + + default: + divisor = UART_PL010_BAUD_38400; + } + + IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRM, ((divisor & 0xf00) >> 8)); + IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); + + /* + ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. + */ + IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRH, + (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); + + /* + ** Finally, enable the UART + */ + IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); + + return (0); +} + +void +serial_putc(const char c) +{ + if (c == '\n') + pl010_putc(CONSOLE_PORT, '\r'); + + pl010_putc(CONSOLE_PORT, c); +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int +serial_getc(void) +{ + return pl010_getc(CONSOLE_PORT); +} + +int +serial_tstc(void) +{ + return pl010_tstc(CONSOLE_PORT); +} + +void +serial_setbrg (void) +{ +} + +static void pl010_putc(int portnum, char c) +{ + /* Wait until there is space in the FIFO */ + while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); + + /* Send the character */ + IO_WRITE(port[portnum] + UART_PL01x_DR, c); +} + +static int pl010_getc(int portnum) +{ + unsigned int data; + + /* Wait until there is data in the FIFO */ + while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + + data = IO_READ(port[portnum] + UART_PL01x_DR); + + /* Check for an error flag */ + if (data & 0xFFFFFF00) + { + /* Clear the error */ + IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + return -1; + } + + return (int)data; +} + +static int pl010_tstc(int portnum) +{ + return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); +} + +#endif |