summaryrefslogtreecommitdiff
path: root/drivers/serial/ns16550.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/ns16550.c')
-rw-r--r--drivers/serial/ns16550.c156
1 files changed, 154 insertions, 2 deletions
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index d54eba6..63a9ef6 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -5,17 +5,25 @@
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
#include <ns16550.h>
+#include <serial.h>
#include <watchdog.h>
#include <linux/types.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
#define UART_MCRVAL (UART_MCR_DTR | \
UART_MCR_RTS) /* RTS/DTR */
#define UART_FCRVAL (UART_FCR_FIFO_EN | \
UART_FCR_RXSR | \
UART_FCR_TXSR) /* Clear & enable FIFOs */
+
+#ifndef CONFIG_DM_SERIAL
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
#define serial_out(x, y) outb(x, (ulong)y)
#define serial_in(y) inb((ulong)y)
@@ -29,6 +37,7 @@
#define serial_out(x, y) writeb(x, y)
#define serial_in(y) readb(y)
#endif
+#endif /* !CONFIG_DM_SERIAL */
#if defined(CONFIG_SOC_KEYSTONE)
#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0
@@ -45,6 +54,58 @@
#define CONFIG_SYS_NS16550_IER 0x00
#endif /* CONFIG_SYS_NS16550_IER */
+#ifdef CONFIG_DM_SERIAL
+static void ns16550_writeb(NS16550_t port, int offset, int value)
+{
+ struct ns16550_platdata *plat = port->plat;
+ unsigned char *addr;
+
+ offset *= 1 << plat->reg_shift;
+ addr = plat->base + offset;
+ /*
+ * As far as we know it doesn't make sense to support selection of
+ * these options at run-time, so use the existing CONFIG options.
+ */
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+ outb(value, addr);
+#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
+ out_le32(addr, value);
+#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
+ out_be32(addr, value);
+#elif defined(CONFIG_SYS_BIG_ENDIAN)
+ writeb(value, addr + (1 << plat->reg_shift) - 1);
+#else
+ writeb(value, addr);
+#endif
+}
+
+static int ns16550_readb(NS16550_t port, int offset)
+{
+ struct ns16550_platdata *plat = port->plat;
+ unsigned char *addr;
+
+ offset *= 1 << plat->reg_shift;
+ addr = plat->base + offset;
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+ return inb(addr);
+#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
+ return in_le32(addr);
+#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
+ return in_be32(addr);
+#elif defined(CONFIG_SYS_BIG_ENDIAN)
+ return readb(addr + (1 << plat->reg_shift) - 1);
+#else
+ return readb(addr);
+#endif
+}
+
+/* We can clean these up once everything is moved to driver model */
+#define serial_out(value, addr) \
+ ns16550_writeb(com_port, addr - (unsigned char *)com_port, value)
+#define serial_in(addr) \
+ ns16550_readb(com_port, addr - (unsigned char *)com_port)
+#endif
+
int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
{
const unsigned int mode_x_div = 16;
@@ -79,7 +140,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
*/
if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
== UART_LSR_THRE) {
- NS16550_setbrg(com_port, baud_divisor);
+ if (baud_divisor != -1)
+ NS16550_setbrg(com_port, baud_divisor);
serial_out(0, &com_port->mdr1);
}
#endif
@@ -95,7 +157,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
NS16550_setbrg(com_port, 0);
serial_out(UART_MCRVAL, &com_port->mcr);
serial_out(UART_FCRVAL, &com_port->fcr);
- NS16550_setbrg(com_port, baud_divisor);
+ if (baud_divisor != -1)
+ NS16550_setbrg(com_port, baud_divisor);
#if defined(CONFIG_OMAP) || \
defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
@@ -154,3 +217,92 @@ int NS16550_tstc(NS16550_t com_port)
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
+
+#ifdef CONFIG_DM_SERIAL
+static int ns16550_serial_putc(struct udevice *dev, const char ch)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+
+ if (!(serial_in(&com_port->lsr) & UART_LSR_THRE))
+ return -EAGAIN;
+ serial_out(ch, &com_port->thr);
+
+ /*
+ * Call watchdog_reset() upon newline. This is done here in putc
+ * since the environment code uses a single puts() to print the complete
+ * environment upon "printenv". So we can't put this watchdog call
+ * in puts().
+ */
+ if (ch == '\n')
+ WATCHDOG_RESET();
+
+ return 0;
+}
+
+static int ns16550_serial_pending(struct udevice *dev, bool input)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+
+ if (input)
+ return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0;
+ else
+ return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1;
+}
+
+static int ns16550_serial_getc(struct udevice *dev)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+
+ if (!serial_in(&com_port->lsr) & UART_LSR_DR)
+ return -EAGAIN;
+
+ return serial_in(&com_port->rbr);
+}
+
+static int ns16550_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550_platdata *plat = com_port->plat;
+ int clock_divisor;
+
+ clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate);
+
+ NS16550_setbrg(com_port, clock_divisor);
+
+ return 0;
+}
+
+int ns16550_serial_probe(struct udevice *dev)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+
+ NS16550_init(com_port, -1);
+
+ return 0;
+}
+
+int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550_platdata *plat = dev->platdata;
+ fdt_addr_t addr;
+
+ addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ plat->base = (unsigned char *)addr;
+ plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "reg-shift", 1);
+ com_port->plat = plat;
+
+ return 0;
+}
+
+const struct dm_serial_ops ns16550_serial_ops = {
+ .putc = ns16550_serial_putc,
+ .pending = ns16550_serial_pending,
+ .getc = ns16550_serial_getc,
+ .setbrg = ns16550_serial_setbrg,
+};
+#endif /* CONFIG_DM_SERIAL */