summaryrefslogtreecommitdiff
path: root/drivers/rtl8139.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtl8139.c')
-rw-r--r--drivers/rtl8139.c539
1 files changed, 539 insertions, 0 deletions
diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c
new file mode 100644
index 0000000..5b14e71
--- /dev/null
+++ b/drivers/rtl8139.c
@@ -0,0 +1,539 @@
+/*
+ * rtl8139.c : U-Boot driver for the RealTek RTL8139
+ *
+ * Masami Komiya (mkomiya@sonare.it)
+ *
+ * Most part is taken from rtl8139.c of etherboot
+ *
+ */
+
+/* rtl8139.c - etherboot driver for the Realtek 8139 chipset
+
+ ported from the linux driver written by Donald Becker
+ by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License, incorporated herein by reference.
+
+ changes to the original driver:
+ - removed support for interrupts, switching to polling mode (yuck!)
+ - removed support for the 8129 chip (external MII)
+
+*/
+
+/*********************************************************************/
+/* Revision History */
+/*********************************************************************/
+
+/*
+ 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap)
+ Put in virt_to_bus calls to allow Etherboot relocation.
+
+ 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap)
+ Following email from Hyun-Joon Cha, added a disable routine, otherwise
+ NIC remains live and can crash the kernel later.
+
+ 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub)
+ Shuffled things around, removed the leftovers from the 8129 support
+ that was in the Linux driver and added a bit more 8139 definitions.
+ Moved the 8K receive buffer to a fixed, available address outside the
+ 0x98000-0x9ffff range. This is a bit of a hack, but currently the only
+ way to make room for the Etherboot features that need substantial amounts
+ of code like the ANSI console support. Currently the buffer is just below
+ 0x10000, so this even conforms to the tagged boot image specification,
+ which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
+ interpretation of this "reserved" is that Etherboot may do whatever it
+ likes, as long as its environment is kept intact (like the BIOS
+ variables). Hopefully fixed rtl_poll() once and for all. The symptoms
+ were that if Etherboot was left at the boot menu for several minutes, the
+ first eth_poll failed. Seems like I am the only person who does this.
+ First of all I fixed the debugging code and then set out for a long bug
+ hunting session. It took me about a week full time work - poking around
+ various places in the driver, reading Don Becker's and Jeff Garzik's Linux
+ driver and even the FreeBSD driver (what a piece of crap!) - and
+ eventually spotted the nasty thing: the transmit routine was acknowledging
+ each and every interrupt pending, including the RxOverrun and RxFIFIOver
+ interrupts. This confused the RTL8139 thoroughly. It destroyed the
+ Rx ring contents by dumping the 2K FIFO contents right where we wanted to
+ get the next packet. Oh well, what fun.
+
+ 18 Jan 2000 mdc@thinguin.org (Marty Connor)
+ Drastically simplified error handling. Basically, if any error
+ in transmission or reception occurs, the card is reset.
+ Also, pointed all transmit descriptors to the same buffer to
+ save buffer space. This should decrease driver size and avoid
+ corruption because of exceeding 32K during runtime.
+
+ 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
+ rtl_poll was quite broken: it used the RxOK interrupt flag instead
+ of the RxBufferEmpty flag which often resulted in very bad
+ transmission performace - below 1kBytes/s.
+
+*/
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#ifdef __MIPS__
+static unsigned long mips_io_port_base = 0;
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_RTL8139)
+
+#define TICKS_PER_SEC CFG_HZ
+#define TICKS_PER_MS (TICKS_PER_SEC/1000)
+
+#define RTL_TIMEOUT (1*TICKS_PER_SEC)
+
+#define ETH_FRAME_LEN 1514
+#define ETH_ALEN 6
+#define ETH_ZLEN 60
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
+#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
+#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
+#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
+#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+
+#undef DEBUG_TX
+#undef DEBUG_RX
+
+#define currticks() get_timer(0)
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0=0, /* Ethernet hardware address. */
+ MAR0=8, /* Multicast filter. */
+ TxStatus0=0x10, /* Transmit status (four 32bit registers). */
+ TxAddr0=0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf=0x30, RxEarlyCnt=0x34, RxEarlyStatus=0x36,
+ ChipCmd=0x37, RxBufPtr=0x38, RxBufAddr=0x3A,
+ IntrMask=0x3C, IntrStatus=0x3E,
+ TxConfig=0x40, RxConfig=0x44,
+ Timer=0x48, /* general-purpose counter. */
+ RxMissed=0x4C, /* 24 bits valid, write clears. */
+ Cfg9346=0x50, Config0=0x51, Config1=0x52,
+ TimerIntrReg=0x54, /* intr if gp counter reaches this value */
+ MediaStatus=0x58,
+ Config3=0x59,
+ MultiIntr=0x5C,
+ RevisionID=0x5E, /* revision of the RTL8139 chip */
+ TxSummary=0x60,
+ MII_BMCR=0x62, MII_BMSR=0x64, NWayAdvert=0x66, NWayLPAR=0x68,
+ NWayExpansion=0x6A,
+ DisconnectCnt=0x6C, FalseCarrierCnt=0x6E,
+ NWayTestReg=0x70,
+ RxCnt=0x72, /* packet received counter */
+ CSCR=0x74, /* chip status and configuration register */
+ PhyParm1=0x78,TwisterParm=0x7c,PhyParm2=0x80, /* undocumented */
+ /* from 0x84 onwards are a number of power management/wakeup frame
+ * definitions we will probably never need to know about. */
+};
+
+enum ChipCmdBits {
+ CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr=0x8000, PCSTimeout=0x4000, CableLenChange= 0x2000,
+ RxFIFOOver=0x40, RxUnderrun=0x20, RxOverflow=0x10,
+ TxErr=0x08, TxOK=0x04, RxErr=0x02, RxOK=0x01,
+};
+enum TxStatusBits {
+ TxHostOwns=0x2000, TxUnderrun=0x4000, TxStatOK=0x8000,
+ TxOutOfWindow=0x20000000, TxAborted=0x40000000,
+ TxCarrierLost=0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast=0x8000, RxPhysical=0x4000, RxBroadcast=0x2000,
+ RxBadSymbol=0x0020, RxRunt=0x0010, RxTooLong=0x0008, RxCRCErr=0x0004,
+ RxBadAlign=0x0002, RxStatusOK=0x0001,
+};
+
+enum MediaStatusBits {
+ MSRTxFlowEnable=0x80, MSRRxFlowEnable=0x40, MSRSpeed10=0x08,
+ MSRLinkFail=0x04, MSRRxPauseFlag=0x02, MSRTxPauseFlag=0x01,
+};
+
+enum MIIBMCRBits {
+ BMCRReset=0x8000, BMCRSpeed100=0x2000, BMCRNWayEnable=0x1000,
+ BMCRRestartNWay=0x0200, BMCRDuplex=0x0100,
+};
+
+enum CSCRBits {
+ CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
+ CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
+ CSCR_LinkDownCmd=0x0f3c0,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ RxCfgWrap=0x80,
+ AcceptErr=0x20, AcceptRunt=0x10, AcceptBroadcast=0x08,
+ AcceptMulticast=0x04, AcceptMyPhys=0x02, AcceptAllPhys=0x01,
+};
+
+static int ioaddr;
+static unsigned int cur_rx,cur_tx;
+
+/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
+static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4)));
+static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4)));
+
+static int rtl8139_probe(struct eth_device *dev, bd_t *bis);
+static int read_eeprom(int location, int addr_len);
+static void rtl_reset(struct eth_device *dev);
+static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length);
+static int rtl_poll(struct eth_device *dev);
+static void rtl_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139},
+ {}
+};
+
+int rtl8139_initialize(bd_t *bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase;
+ int idx=0;
+
+ while(1){
+ /* Find RTL8139 */
+ if ((devno = pci_find_devices(supported, idx++)) < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ sprintf (dev->name, "RTL8139#%d", card_number);
+
+ dev->priv = (void *) devno;
+ dev->iobase = (int)bus_to_phys(iobase);
+ dev->init = rtl8139_probe;
+ dev->halt = rtl_disable;
+ dev->send = rtl_transmit;
+ dev->recv = rtl_poll;
+
+ eth_register (dev);
+
+ card_number++;
+
+ pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay (10 * 1000);
+ }
+
+ return card_number;
+}
+
+static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ int speed10, fullduplex;
+ int addr_len;
+ unsigned short *ap = (unsigned short *)dev->enetaddr;
+
+ ioaddr = dev->iobase;
+
+ /* Bring the chip out of low-power mode. */
+ outb(0x00, ioaddr + Config1);
+
+ addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ *ap++ = read_eeprom(i + 7, addr_len);
+
+ speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10;
+ fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex;
+
+ rtl_reset(dev);
+
+ if (inb(ioaddr + MediaStatus) & MSRLinkFail) {
+ printf("Cable not connected or other link failure\n");
+ return(0);
+ }
+
+ return 1;
+}
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/*
+ Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+*/
+
+#define eeprom_delay() inl(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int read_eeprom(int location, int addr_len)
+{
+ int i;
+ unsigned int retval = 0;
+ long ee_addr = ioaddr + Cfg9346;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ outb(EE_ENB & ~EE_CS, ee_addr);
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ outb(EE_ENB | dataval, ee_addr);
+ eeprom_delay();
+ outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ }
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ for (i = 16; i > 0; i--) {
+ outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+ }
+
+ /* Terminate the EEPROM access. */
+ outb(~EE_CS, ee_addr);
+ eeprom_delay();
+ return retval;
+}
+
+static const unsigned int rtl8139_rx_config =
+ (RX_BUF_LEN_IDX << 11) |
+ (RX_FIFO_THRESH << 13) |
+ (RX_DMA_BURST << 8);
+
+static void set_rx_mode(struct eth_device *dev) {
+ unsigned int mc_filter[2];
+ int rx_mode;
+ /* !IFF_PROMISC */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+
+ outl(rtl8139_rx_config | rx_mode, ioaddr + RxConfig);
+
+ outl(mc_filter[0], ioaddr + MAR0 + 0);
+ outl(mc_filter[1], ioaddr + MAR0 + 4);
+}
+
+static void rtl_reset(struct eth_device *dev)
+{
+ int i;
+
+ outb(CmdReset, ioaddr + ChipCmd);
+
+ cur_rx = 0;
+ cur_tx = 0;
+
+ /* Give the chip 10ms to finish the reset. */
+ for (i=0; i<100; ++i){
+ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
+ udelay (100); /* wait 100us */
+ }
+
+
+ for (i = 0; i < ETH_ALEN; i++)
+ outb(dev->enetaddr[i], ioaddr + MAC0 + i);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+ outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
+ ioaddr + RxConfig); /* accept no frames yet! */
+ outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
+
+ /* The Linux driver changes Config1 here to use a different LED pattern
+ * for half duplex or full/autodetect duplex (for full/autodetect, the
+ * outputs are TX/RX, Link10/100, FULL, while for half duplex it uses
+ * TX/RX, Link100, Link10). This is messy, because it doesn't match
+ * the inscription on the mounting bracket. It should not be changed
+ * from the configuration EEPROM default, because the card manufacturer
+ * should have set that to match the card. */
+
+#ifdef DEBUG_RX
+ printf("rx ring address is %X\n",(unsigned long)rx_ring);
+#endif
+ outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
+
+ /* If we add multicast support, the MAR0 register would have to be
+ * initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot
+ * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
+
+ outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+
+ outl(rtl8139_rx_config, ioaddr + RxConfig);
+
+ /* Start the chip's Tx and Rx process. */
+ outl(0, ioaddr + RxMissed);
+
+ /* set_rx_mode */
+ set_rx_mode(dev);
+
+ /* Disable all known interrupts by setting the interrupt mask. */
+ outw(0, ioaddr + IntrMask);
+}
+
+static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
+{
+ unsigned int status, to;
+ unsigned long txstatus;
+ unsigned int len = length;
+
+ ioaddr = dev->iobase;
+
+ memcpy((char *)tx_buffer, (char *)packet, (int)length);
+
+#ifdef DEBUG_TX
+ printf("sending %d bytes\n", len);
+#endif
+
+ /* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
+ * bytes are sent automatically for the FCS, totalling to 64 bytes). */
+ while (len < ETH_ZLEN) {
+ tx_buffer[len++] = '\0';
+ }
+
+ outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4);
+ outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
+ ioaddr + TxStatus0 + cur_tx*4);
+
+ to = currticks() + RTL_TIMEOUT;
+
+ do {
+ status = inw(ioaddr + IntrStatus);
+ /* Only acknlowledge interrupt sources we can properly handle
+ * here - the RxOverflow/RxFIFOOver MUST be handled in the
+ * rtl_poll() function. */
+ outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
+ if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
+ } while (currticks() < to);
+
+ txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
+
+ if (status & TxOK) {
+ cur_tx = (cur_tx + 1) % NUM_TX_DESC;
+#ifdef DEBUG_TX
+ printf("tx done (%d ticks), status %hX txstatus %X\n",
+ to-currticks(), status, txstatus);
+#endif
+ return length;
+ } else {
+#ifdef DEBUG_TX
+ printf("tx timeout/error (%d ticks), status %hX txstatus %X\n",
+ currticks()-to, status, txstatus);
+#endif
+ rtl_reset(dev);
+
+ return 0;
+ }
+}
+
+static int rtl_poll(struct eth_device *dev)
+{
+ unsigned int status;
+ unsigned int ring_offs;
+ unsigned int rx_size, rx_status;
+ int length=0;
+
+ ioaddr = dev->iobase;
+
+ if (inb(ioaddr + ChipCmd) & RxBufEmpty) {
+ return 0;
+ }
+
+ status = inw(ioaddr + IntrStatus);
+ /* See below for the rest of the interrupt acknowledges. */
+ outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
+
+#ifdef DEBUG_RX
+ printf("rtl_poll: int %hX ", status);
+#endif
+
+ ring_offs = cur_rx % RX_BUF_LEN;
+ rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs));
+ rx_size = rx_status >> 16;
+ rx_status &= 0xffff;
+
+ if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
+ (rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
+ printf("rx error %hX\n", rx_status);
+ rtl_reset(dev); /* this clears all interrupts still pending */
+ return 0;
+ }
+
+ /* Received a good packet */
+ length = rx_size - 4; /* no one cares about the FCS */
+ if (ring_offs+4+rx_size-4 > RX_BUF_LEN) {
+ int semi_count = RX_BUF_LEN - ring_offs - 4;
+ unsigned char rxdata[RX_BUF_LEN];
+
+ memcpy(rxdata, rx_ring + ring_offs + 4, semi_count);
+ memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count);
+
+ NetReceive(rxdata, length);
+#ifdef DEBUG_RX
+ printf("rx packet %d+%d bytes", semi_count,rx_size-4-semi_count);
+#endif
+ } else {
+ NetReceive(rx_ring + ring_offs + 4, length);
+#ifdef DEBUG_RX
+ printf("rx packet %d bytes", rx_size-4);
+#endif
+ }
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ outw(cur_rx - 16, ioaddr + RxBufPtr);
+ /* See RTL8139 Programming Guide V0.1 for the official handling of
+ * Rx overflow situations. The document itself contains basically no
+ * usable information, except for a few exception handling rules. */
+ outw(status & (RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
+ return length;
+}
+
+static void rtl_disable(struct eth_device *dev)
+{
+ int i;
+
+ /* reset the chip */
+ outb(CmdReset, ioaddr + ChipCmd);
+
+ /* Give the chip 10ms to finish the reset. */
+ for (i=0; i<100; ++i){
+ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
+ udelay (100); /* wait 100us */
+ }
+}
+#endif /* CFG_CMD_NET && CONFIG_NET_MULTI && CONFIG_RTL8139 */