diff options
Diffstat (limited to 'drivers/qe')
| -rw-r--r-- | drivers/qe/Makefile | 3 | ||||
| -rw-r--r-- | drivers/qe/fdt.c | 2 | ||||
| -rw-r--r-- | drivers/qe/qe.c | 140 | ||||
| -rw-r--r-- | drivers/qe/qe.h | 5 |
4 files changed, 149 insertions, 1 deletions
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile index 7f1bd06..8fa4866 100644 --- a/drivers/qe/Makefile +++ b/drivers/qe/Makefile @@ -4,5 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_U_QE) += qe.o obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c index d9a7d82..dfae4bf 100644 --- a/drivers/qe/fdt.c +++ b/drivers/qe/fdt.c @@ -12,6 +12,7 @@ #include <fdt_support.h> #include "qe.h" +#ifdef CONFIG_QE DECLARE_GLOBAL_DATA_PTR; /* @@ -72,3 +73,4 @@ void ft_qe_setup(void *blob) "clock-frequency", gd->arch.qe_clk / 2, 1); fdt_fixup_qe_firmware(blob); } +#endif diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 4358a91..bc94673 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -40,6 +40,7 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) return; } +#ifdef CONFIG_QE uint qe_muram_alloc(uint size, uint align) { uint retloc; @@ -70,6 +71,7 @@ uint qe_muram_alloc(uint size, uint align) return retloc; } +#endif void *qe_muram_addr(uint offset) { @@ -180,6 +182,17 @@ void qe_init(uint qe_base) qe_snums_init(); } +#ifdef CONFIG_U_QE +void u_qe_init(void) +{ + uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */ + qe_immr = (qe_map_t *)qe_base; + + u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); + out_be32(&qe_immr->iram.iready, QE_IRAM_READY); +} +#endif + void qe_reset(void) { qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, @@ -212,6 +225,7 @@ void qe_assign_page(uint snum, uint para_ram_base) #define BRG_CLK (gd->arch.brg_clk) +#ifdef CONFIG_QE int qe_set_brg(uint brg, uint rate) { volatile uint *bp; @@ -239,6 +253,7 @@ int qe_set_brg(uint brg, uint rate) return 0; } +#endif /* Set ethernet MII clock master */ @@ -429,6 +444,131 @@ int qe_upload_firmware(const struct qe_firmware *firmware) return 0; } +#ifdef CONFIG_U_QE +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See docs/README.qe_firmware for information on QE microcode uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int u_qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; +#ifdef CONFIG_DEEP_SLEEP + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif + if (!firmware) { + printf("Invalid address\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printf("Not a microcode\n"); +#ifdef CONFIG_DEEP_SLEEP + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE); +#endif + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printf("Unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printf("Invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(u32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(u32)) { + printf("Invalid length\n"); + return -EPERM; + } + + /* + * Validate the CRC. We would normally call crc32_no_comp(), but that + * function isn't available unless you turn on JFFS support. + */ + crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size)); + if (crc != (crc32(-1, (const void *)firmware, calc_size) ^ -1)) { + printf("Firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) { + out_be16(&qe_immr->cp.cercr, + in_be16(&qe_immr->cp.cercr) | QE_CP_CERCR_CIR); + } + + if (firmware->soc.model) + printf("Firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printf("Firmware '%s'\n", firmware->id); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + return 0; +} +#endif + struct qe_firmware_info *qe_get_firmware_info(void) { return qe_firmware_uploaded ? &qe_firmware_info : NULL; diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h index ebb7c5f..33878f8 100644 --- a/drivers/qe/qe.h +++ b/drivers/qe/qe.h @@ -285,4 +285,9 @@ void ft_qe_setup(void *blob); void qe_init(uint qe_base); void qe_reset(void); +#ifdef CONFIG_U_QE +void u_qe_init(void); +int u_qe_upload_firmware(const struct qe_firmware *firmware); +#endif + #endif /* __QE_H__ */ |