diff options
Diffstat (limited to 'drivers/qe/uec_phy.c')
-rw-r--r-- | drivers/qe/uec_phy.c | 68 |
1 files changed, 34 insertions, 34 deletions
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 35f2368..465a497 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -242,7 +242,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info) advertise = mii_info->advertising; /* Setup standard advertisement */ - adv = phy_read (mii_info, PHY_ANAR); + adv = phy_read (mii_info, MII_ADVERTISE); adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; @@ -252,7 +252,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; - phy_write (mii_info, PHY_ANAR, adv); + phy_write (mii_info, MII_ADVERTISE, adv); } static void genmii_setup_forced (struct uec_mii_info *mii_info) @@ -260,24 +260,24 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info) u16 ctrl; u32 features = mii_info->phyinfo->features; - ctrl = phy_read (mii_info, PHY_BMCR); + ctrl = phy_read (mii_info, MII_BMCR); - ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS | - PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON); - ctrl |= PHY_BMCR_RESET; + ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | + BMCR_SPEED1000 | BMCR_ANENABLE); + ctrl |= BMCR_RESET; switch (mii_info->speed) { case SPEED_1000: if (features & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { - ctrl |= PHY_BMCR_1000_MBPS; + ctrl |= BMCR_SPEED1000; break; } mii_info->speed = SPEED_100; case SPEED_100: if (features & (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full)) { - ctrl |= PHY_BMCR_100_MBPS; + ctrl |= BMCR_SPEED100; break; } mii_info->speed = SPEED_10; @@ -290,7 +290,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info) break; } - phy_write (mii_info, PHY_BMCR, ctrl); + phy_write (mii_info, MII_BMCR, ctrl); } /* Enable and Restart Autonegotiation */ @@ -298,9 +298,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info) { u16 ctl; - ctl = phy_read (mii_info, PHY_BMCR); - ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); - phy_write (mii_info, PHY_BMCR, ctl); + ctl = phy_read (mii_info, MII_BMCR); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write (mii_info, MII_BMCR, ctl); } static int gbit_config_aneg (struct uec_mii_info *mii_info) @@ -335,7 +335,7 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info) /* The Marvell PHY has an errata which requires * that certain registers get written in order * to restart autonegotiation */ - phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET); + phy_write (mii_info, MII_BMCR, BMCR_RESET); phy_write (mii_info, 0x1d, 0x1f); phy_write (mii_info, 0x1e, 0x200c); @@ -373,18 +373,18 @@ static int genmii_update_link (struct uec_mii_info *mii_info) u16 status; /* Status is read once to clear old link state */ - phy_read (mii_info, PHY_BMSR); + phy_read (mii_info, MII_BMSR); /* * Wait if the link is up, and autonegotiation is in progress * (ie - we're capable and it's not done) */ - status = phy_read(mii_info, PHY_BMSR); - if ((status & PHY_BMSR_LS) && (status & PHY_BMSR_AUTN_ABLE) - && !(status & PHY_BMSR_AUTN_COMP)) { + status = phy_read(mii_info, MII_BMSR); + if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE) + && !(status & BMSR_ANEGCOMPLETE)) { int i = 0; - while (!(status & PHY_BMSR_AUTN_COMP)) { + while (!(status & BMSR_ANEGCOMPLETE)) { /* * Timeout reached ? */ @@ -395,11 +395,11 @@ static int genmii_update_link (struct uec_mii_info *mii_info) i++; udelay(1000); /* 1 ms */ - status = phy_read(mii_info, PHY_BMSR); + status = phy_read(mii_info, MII_BMSR); } mii_info->link = 1; } else { - if (status & PHY_BMSR_LS) + if (status & BMSR_LSTATUS) mii_info->link = 1; else mii_info->link = 0; @@ -429,13 +429,13 @@ static int genmii_read_status (struct uec_mii_info *mii_info) else mii_info->duplex = DUPLEX_HALF; } else { - status = phy_read(mii_info, PHY_ANLPAR); + status = phy_read(mii_info, MII_LPA); - if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) + if (status & (LPA_10FULL | LPA_100FULL)) mii_info->duplex = DUPLEX_FULL; else mii_info->duplex = DUPLEX_HALF; - if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) + if (status & (LPA_100FULL | LPA_100HALF)) mii_info->speed = SPEED_100; else mii_info->speed = SPEED_10; @@ -463,8 +463,8 @@ static int bcm_init(struct uec_mii_info *mii_info) /* Wait for aneg to complete. */ do - val = phy_read(mii_info, PHY_BMSR); - while (--cnt && !(val & PHY_BMSR_AUTN_COMP)); + val = phy_read(mii_info, MII_BMSR); + while (--cnt && !(val & BMSR_ANEGCOMPLETE)); /* Set RDX clk delay. */ phy_write(mii_info, 0x18, 0x7 | (7 << 12)); @@ -511,7 +511,7 @@ static int marvell_init(struct uec_mii_info *mii_info) temp |= MII_M1111_HWCFG_MODE_RGMII; phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); - phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET); + phy_write(mii_info, MII_BMCR, BMCR_RESET); } return 0; @@ -582,11 +582,11 @@ static int marvell_config_intr (struct uec_mii_info *mii_info) static int dm9161_init (struct uec_mii_info *mii_info) { /* Reset the PHY */ - phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) | - PHY_BMCR_RESET); + phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) | + BMCR_RESET); /* PHY and MAC connect */ - phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) & - ~PHY_BMCR_ISO); + phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) & + ~BMCR_ISOLATE); phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); @@ -825,11 +825,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) struct phy_info *theInfo = NULL; /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read (mii_info, PHY_PHYIDR1); + phy_reg = phy_read (mii_info, MII_PHYSID1); phy_ID = (phy_reg & 0xffff) << 16; /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read (mii_info, PHY_PHYIDR2); + phy_reg = phy_read (mii_info, MII_PHYSID2); phy_ID |= (phy_reg & 0xffff); /* loop through all the known PHY types, and find one that */ @@ -900,8 +900,8 @@ void marvell_phy_interface_mode (struct eth_device *dev, /* handle 88e1111 rev.B2 erratum 5.6 */ if (mii_info->autoneg) { - status = phy_read (mii_info, PHY_BMCR); - phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON); + status = phy_read (mii_info, MII_BMCR); + phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE); } /* now the B2 will correctly report autoneg completion status */ } |