summaryrefslogtreecommitdiff
path: root/drivers/qe/uec_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/qe/uec_phy.c')
-rw-r--r--drivers/qe/uec_phy.c103
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 186922e..829f082 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -44,6 +44,54 @@
#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
#endif /* UEC_VERBOSE_DEBUG */
+/*--------------------------------------------------------------------+
+ * Fixed PHY (PHY-less) support for Ethernet Ports.
+ *
+ * Copied from cpu/ppc4xx/4xx_enet.c
+ *--------------------------------------------------------------------*/
+
+/*
+ * Some boards do not have a PHY for each ethernet port. These ports
+ * are known as Fixed PHY (or PHY-less) ports. For such ports, set
+ * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and
+ * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and
+ * duplex should be for these ports in the board configuration
+ * file.
+ *
+ * For Example:
+ * #define CONFIG_FIXED_PHY 0xFFFFFFFF
+ *
+ * #define CONFIG_PHY_ADDR CONFIG_FIXED_PHY
+ * #define CONFIG_PHY1_ADDR 1
+ * #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY
+ * #define CONFIG_PHY3_ADDR 3
+ *
+ * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \
+ * {devnum, speed, duplex},
+ *
+ * #define CONFIG_SYS_FIXED_PHY_PORTS \
+ * CONFIG_SYS_FIXED_PHY_PORT(0,SPEED_100,DUPLEX_FULL) \
+ * CONFIG_SYS_FIXED_PHY_PORT(2,SPEED_100,DUPLEX_HALF)
+ */
+
+#ifndef CONFIG_FIXED_PHY
+#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */
+#endif
+
+#ifndef CONFIG_SYS_FIXED_PHY_PORTS
+#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */
+#endif
+
+struct fixed_phy_port {
+ unsigned int devnum; /* ethernet port */
+ unsigned int speed; /* specified speed 10,100 or 1000 */
+ unsigned int duplex; /* specified duplex FULL or HALF */
+};
+
+static const struct fixed_phy_port fixed_phy_port[] = {
+ CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
+};
+
static void config_genmii_advert (struct uec_mii_info *mii_info);
static void genmii_setup_forced (struct uec_mii_info *mii_info);
static void genmii_restart_aneg (struct uec_mii_info *mii_info);
@@ -376,6 +424,29 @@ static int bcm_init(struct uec_mii_info *mii_info)
return 0;
}
+static int marvell_init(struct uec_mii_info *mii_info)
+{
+ struct eth_device *edev = mii_info->dev;
+ uec_private_t *uec = edev->priv;
+
+ if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+ int temp;
+
+ temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+
+ temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+ temp &= ~MII_M1111_HWCFG_MODE_MASK;
+ temp |= MII_M1111_HWCFG_MODE_RGMII;
+ phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+
+ phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+ }
+
+ return 0;
+}
+
static int marvell_read_status (struct uec_mii_info *mii_info)
{
u16 status;
@@ -510,6 +581,28 @@ static void dm9161_close (struct uec_mii_info *mii_info)
{
}
+static int fixed_phy_aneg (struct uec_mii_info *mii_info)
+{
+ mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
+ return 0;
+}
+
+static int fixed_phy_read_status (struct uec_mii_info *mii_info)
+{
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
+ if (mii_info->mii_id == fixed_phy_port[i].devnum) {
+ mii_info->speed = fixed_phy_port[i].speed;
+ mii_info->duplex = fixed_phy_port[i].duplex;
+ mii_info->link = 1; /* Link is always UP */
+ mii_info->pause = 0;
+ break;
+ }
+ }
+ return 0;
+}
+
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
@@ -538,6 +631,7 @@ static struct phy_info phy_info_marvell = {
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
+ .init = &marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
@@ -553,6 +647,14 @@ static struct phy_info phy_info_bcm5481 = {
.init = bcm_init,
};
+static struct phy_info phy_info_fixedphy = {
+ .phy_id = CONFIG_FIXED_PHY,
+ .phy_id_mask = CONFIG_FIXED_PHY,
+ .name = "Fixed PHY",
+ .config_aneg = fixed_phy_aneg,
+ .read_status = fixed_phy_read_status,
+};
+
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
@@ -567,6 +669,7 @@ static struct phy_info *phy_info[] = {
&phy_info_dm9161a,
&phy_info_marvell,
&phy_info_bcm5481,
+ &phy_info_fixedphy,
&phy_info_genmii,
NULL
};