diff options
Diffstat (limited to 'drivers/qe/qe.h')
| -rw-r--r-- | drivers/qe/qe.h | 299 |
1 files changed, 0 insertions, 299 deletions
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h deleted file mode 100644 index 77b18e9..0000000 --- a/drivers/qe/qe.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. - * - * Dave Liu <daveliu@freescale.com> - * based on source code of Shlomi Gridish - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __QE_H__ -#define __QE_H__ - -#include "common.h" -#ifdef CONFIG_U_QE -#include <linux/immap_qe.h> -#endif - -#define QE_NUM_OF_BRGS 16 -#define UCC_MAX_NUM 8 - -#define QE_DATAONLY_BASE 0 -#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE) - -/* QE threads SNUM -*/ -typedef enum qe_snum_state { - QE_SNUM_STATE_USED, /* used */ - QE_SNUM_STATE_FREE /* free */ -} qe_snum_state_e; - -typedef struct qe_snum { - u8 num; /* snum */ - qe_snum_state_e state; /* state */ -} qe_snum_t; - -/* QE RISC allocation -*/ -#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ -#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ -#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ -#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ -#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ - QE_RISC_ALLOCATION_RISC2) -#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ - QE_RISC_ALLOCATION_RISC2 | \ - QE_RISC_ALLOCATION_RISC3 | \ - QE_RISC_ALLOCATION_RISC4) - -/* QE CECR commands for UCC fast. -*/ -#define QE_CR_FLG 0x00010000 -#define QE_RESET 0x80000000 -#define QE_INIT_TX_RX 0x00000000 -#define QE_INIT_RX 0x00000001 -#define QE_INIT_TX 0x00000002 -#define QE_ENTER_HUNT_MODE 0x00000003 -#define QE_STOP_TX 0x00000004 -#define QE_GRACEFUL_STOP_TX 0x00000005 -#define QE_RESTART_TX 0x00000006 -#define QE_SWITCH_COMMAND 0x00000007 -#define QE_SET_GROUP_ADDRESS 0x00000008 -#define QE_INSERT_CELL 0x00000009 -#define QE_ATM_TRANSMIT 0x0000000a -#define QE_CELL_POOL_GET 0x0000000b -#define QE_CELL_POOL_PUT 0x0000000c -#define QE_IMA_HOST_CMD 0x0000000d -#define QE_ATM_MULTI_THREAD_INIT 0x00000011 -#define QE_ASSIGN_PAGE 0x00000012 -#define QE_START_FLOW_CONTROL 0x00000014 -#define QE_STOP_FLOW_CONTROL 0x00000015 -#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 -#define QE_GRACEFUL_STOP_RX 0x0000001a -#define QE_RESTART_RX 0x0000001b - -/* QE CECR Sub Block Code - sub block code of QE command. -*/ -#define QE_CR_SUBBLOCK_INVALID 0x00000000 -#define QE_CR_SUBBLOCK_USB 0x03200000 -#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 -#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 -#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 -#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 -#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 -#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 -#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 -#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 -#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 -#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 -#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 -#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 -#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 -#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 -#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 -#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 -#define QE_CR_SUBBLOCK_MCC1 0x03800000 -#define QE_CR_SUBBLOCK_MCC2 0x03a00000 -#define QE_CR_SUBBLOCK_MCC3 0x03000000 -#define QE_CR_SUBBLOCK_IDMA1 0x02800000 -#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 -#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 -#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 -#define QE_CR_SUBBLOCK_HPAC 0x01e00000 -#define QE_CR_SUBBLOCK_SPI1 0x01400000 -#define QE_CR_SUBBLOCK_SPI2 0x01600000 -#define QE_CR_SUBBLOCK_RAND 0x01c00000 -#define QE_CR_SUBBLOCK_TIMER 0x01e00000 -#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 - -/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command. -*/ -#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ -#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 -#define QE_CR_PROTOCOL_ATM_POS 0x0A -#define QE_CR_PROTOCOL_ETHERNET 0x0C -#define QE_CR_PROTOCOL_L2_SWITCH 0x0D -#define QE_CR_PROTOCOL_SHIFT 6 - -/* QE ASSIGN PAGE command -*/ -#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17 - -/* Communication Direction. -*/ -typedef enum comm_dir { - COMM_DIR_NONE = 0, - COMM_DIR_RX = 1, - COMM_DIR_TX = 2, - COMM_DIR_RX_AND_TX = 3 -} comm_dir_e; - -/* Clocks and BRG's -*/ -typedef enum qe_clock { - QE_CLK_NONE = 0, - QE_BRG1, /* Baud Rate Generator 1 */ - QE_BRG2, /* Baud Rate Generator 2 */ - QE_BRG3, /* Baud Rate Generator 3 */ - QE_BRG4, /* Baud Rate Generator 4 */ - QE_BRG5, /* Baud Rate Generator 5 */ - QE_BRG6, /* Baud Rate Generator 6 */ - QE_BRG7, /* Baud Rate Generator 7 */ - QE_BRG8, /* Baud Rate Generator 8 */ - QE_BRG9, /* Baud Rate Generator 9 */ - QE_BRG10, /* Baud Rate Generator 10 */ - QE_BRG11, /* Baud Rate Generator 11 */ - QE_BRG12, /* Baud Rate Generator 12 */ - QE_BRG13, /* Baud Rate Generator 13 */ - QE_BRG14, /* Baud Rate Generator 14 */ - QE_BRG15, /* Baud Rate Generator 15 */ - QE_BRG16, /* Baud Rate Generator 16 */ - QE_CLK1, /* Clock 1 */ - QE_CLK2, /* Clock 2 */ - QE_CLK3, /* Clock 3 */ - QE_CLK4, /* Clock 4 */ - QE_CLK5, /* Clock 5 */ - QE_CLK6, /* Clock 6 */ - QE_CLK7, /* Clock 7 */ - QE_CLK8, /* Clock 8 */ - QE_CLK9, /* Clock 9 */ - QE_CLK10, /* Clock 10 */ - QE_CLK11, /* Clock 11 */ - QE_CLK12, /* Clock 12 */ - QE_CLK13, /* Clock 13 */ - QE_CLK14, /* Clock 14 */ - QE_CLK15, /* Clock 15 */ - QE_CLK16, /* Clock 16 */ - QE_CLK17, /* Clock 17 */ - QE_CLK18, /* Clock 18 */ - QE_CLK19, /* Clock 19 */ - QE_CLK20, /* Clock 20 */ - QE_CLK21, /* Clock 21 */ - QE_CLK22, /* Clock 22 */ - QE_CLK23, /* Clock 23 */ - QE_CLK24, /* Clock 24 */ - QE_CLK_DUMMY -} qe_clock_e; - -/* QE CMXGCR register -*/ -#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000 -#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 - -/* QE CMXUCR registers - */ -#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F - -/* QE BRG configuration register -*/ -#define QE_BRGC_ENABLE 0x00010000 -#define QE_BRGC_DIVISOR_SHIFT 1 -#define QE_BRGC_DIVISOR_MAX 0xFFF -#define QE_BRGC_DIV16 1 - -/* QE SDMA registers -*/ -#define QE_SDSR_BER1 0x02000000 -#define QE_SDSR_BER2 0x01000000 - -#define QE_SDMR_GLB_1_MSK 0x80000000 -#define QE_SDMR_ADR_SEL 0x20000000 -#define QE_SDMR_BER1_MSK 0x02000000 -#define QE_SDMR_BER2_MSK 0x01000000 -#define QE_SDMR_EB1_MSK 0x00800000 -#define QE_SDMR_ER1_MSK 0x00080000 -#define QE_SDMR_ER2_MSK 0x00040000 -#define QE_SDMR_CEN_MASK 0x0000E000 -#define QE_SDMR_SBER_1 0x00000200 -#define QE_SDMR_SBER_2 0x00000200 -#define QE_SDMR_EB1_PR_MASK 0x000000C0 -#define QE_SDMR_ER1_PR 0x00000008 - -#define QE_SDMR_CEN_SHIFT 13 -#define QE_SDMR_EB1_PR_SHIFT 6 - -#define QE_SDTM_MSNUM_SHIFT 24 - -#define QE_SDEBCR_BA_MASK 0x01FFFFFF - -/* Communication Processor */ -#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ -#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ -#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ - -/* I-RAM */ -#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ -#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ -#define QE_IRAM_READY 0x80000000 - -/* Structure that defines QE firmware binary files. - * - * See doc/README.qe_firmware for a description of these fields. - */ -struct qe_firmware { - struct qe_header { - u32 length; /* Length of the entire structure, in bytes */ - u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ - u8 version; /* Version of this layout. First ver is '1' */ - } header; - u8 id[62]; /* Null-terminated identifier string */ - u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ - u8 count; /* Number of microcode[] structures */ - struct { - u16 model; /* The SOC model */ - u8 major; /* The SOC revision major */ - u8 minor; /* The SOC revision minor */ - } __attribute__ ((packed)) soc; - u8 padding[4]; /* Reserved, for alignment */ - u64 extended_modes; /* Extended modes */ - u32 vtraps[8]; /* Virtual trap addresses */ - u8 reserved[4]; /* Reserved, for future expansion */ - struct qe_microcode { - u8 id[32]; /* Null-terminated identifier */ - u32 traps[16]; /* Trap addresses, 0 == ignore */ - u32 eccr; /* The value for the ECCR register */ - u32 iram_offset;/* Offset into I-RAM for the code */ - u32 count; /* Number of 32-bit words of the code */ - u32 code_offset;/* Offset of the actual microcode */ - u8 major; /* The microcode version major */ - u8 minor; /* The microcode version minor */ - u8 revision; /* The microcode version revision */ - u8 padding; /* Reserved, for alignment */ - u8 reserved[4]; /* Reserved, for future expansion */ - } __attribute__ ((packed)) microcode[1]; - /* All microcode binaries should be located here */ - /* CRC32 should be located here, after the microcode binaries */ -} __attribute__ ((packed)); - -struct qe_firmware_info { - char id[64]; /* Firmware name */ - u32 vtraps[8]; /* Virtual trap addresses */ - u64 extended_modes; /* Extended modes */ -}; - -void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign); -void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data); -uint qe_muram_alloc(uint size, uint align); -void *qe_muram_addr(uint offset); -int qe_get_snum(void); -void qe_put_snum(u8 snum); -void qe_init(uint qe_base); -void qe_reset(void); -void qe_assign_page(uint snum, uint para_ram_base); -int qe_set_brg(uint brg, uint rate); -int qe_set_mii_clk_src(int ucc_num); -int qe_upload_firmware(const struct qe_firmware *firmware); -struct qe_firmware_info *qe_get_firmware_info(void); -void ft_qe_setup(void *blob); -void qe_init(uint qe_base); -void qe_reset(void); - -#ifdef CONFIG_U_QE -void u_qe_init(void); -int u_qe_upload_firmware(const struct qe_firmware *firmware); -void u_qe_resume(void); -int u_qe_firmware_resume(const struct qe_firmware *firmware, - qe_map_t *qe_immrr); -#endif - -#endif /* __QE_H__ */ |