diff options
Diffstat (limited to 'drivers/power/regulator')
-rw-r--r-- | drivers/power/regulator/Kconfig | 30 | ||||
-rw-r--r-- | drivers/power/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/regulator/sandbox.c | 355 |
3 files changed, 386 insertions, 0 deletions
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index fd3cf35..6289b83 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -31,3 +31,33 @@ config DM_REGULATOR_FIXED This config enables implementation of driver-model regulator uclass features for fixed value regulators. The driver implements get/set api for enable and get only for voltage value. + +config DM_REGULATOR_SANDBOX + bool "Enable Driver Model for Sandbox PMIC regulator" + depends on DM_REGULATOR && DM_PMIC_SANDBOX + ---help--- + Enable the regulator driver for emulated Sandbox PMIC. + The emulated PMIC device depends on two drivers: + - sandbox PMIC I/O driver - implements dm pmic operations + - sandbox PMIC regulator driver - implements dm regulator operations + - sandbox PMIC i2c emul driver - emulates the PMIC's I2C transmission + + The regulator driver provides uclass operations for sandbox PMIC's + regulators. The driver implements get/set api for: voltage, current, + operation mode and enable state. + The driver supports LDO and BUCK regulators. + + The Sandbox PMIC info: + * I/O interface: + - I2C chip address: 0x40 + - first register address: 0x0 + - register count: 0x10 + * Adjustable outputs: + - 2x LDO + - 2x BUCK + - Each, with a different operating conditions (header). + * Reset values: + - set by i2c emul driver's probe() (defaults in header) + + A detailed information can be found in header: '<power/sandbox_pmic.h>' + Binding info: 'doc/device-tree-bindings/pmic/max77686.txt' diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index cc8326d..96aa624 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_DM_REGULATOR) += regulator-uclass.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_DM_REGULATOR_FIXED) += fixed.o +obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o diff --git a/drivers/power/regulator/sandbox.c b/drivers/power/regulator/sandbox.c new file mode 100644 index 0000000..2cca579 --- /dev/null +++ b/drivers/power/regulator/sandbox.c @@ -0,0 +1,355 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <errno.h> +#include <dm.h> +#include <i2c.h> +#include <power/pmic.h> +#include <power/regulator.h> +#include <power/sandbox_pmic.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define MODE(_id, _val, _name) [_id] = { \ + .id = _id, \ + .register_value = _val, \ + .name = _name, \ +} + +#define RANGE(_min, _max, _step) { \ + .min = _min, \ + .max = _max, \ + .step = _step, \ +} + +/* + * struct output_range - helper structure type to define the range of output + * operating values (current/voltage), limited by the PMIC IC design. + * + * @min - minimum value + * @max - maximum value + * @step - step value +*/ +struct output_range { + int min; + int max; + int step; +}; + +/* BUCK: 1,2 - voltage range */ +static struct output_range buck_voltage_range[] = { + RANGE(OUT_BUCK1_UV_MIN, OUT_BUCK1_UV_MAX, OUT_BUCK1_UV_STEP), + RANGE(OUT_BUCK2_UV_MIN, OUT_BUCK2_UV_MAX, OUT_BUCK2_UV_STEP), +}; + +/* BUCK: 1 - current range */ +static struct output_range buck_current_range[] = { + RANGE(OUT_BUCK1_UA_MIN, OUT_BUCK1_UA_MAX, OUT_BUCK1_UA_STEP), +}; + +/* BUCK operating modes */ +static struct dm_regulator_mode sandbox_buck_modes[] = { + MODE(BUCK_OM_OFF, OM2REG(BUCK_OM_OFF), "OFF"), + MODE(BUCK_OM_ON, OM2REG(BUCK_OM_ON), "ON"), + MODE(BUCK_OM_PWM, OM2REG(BUCK_OM_PWM), "PWM"), +}; + +/* LDO: 1,2 - voltage range */ +static struct output_range ldo_voltage_range[] = { + RANGE(OUT_LDO1_UV_MIN, OUT_LDO1_UV_MAX, OUT_LDO1_UV_STEP), + RANGE(OUT_LDO2_UV_MIN, OUT_LDO2_UV_MAX, OUT_LDO2_UV_STEP), +}; + +/* LDO: 1 - current range */ +static struct output_range ldo_current_range[] = { + RANGE(OUT_LDO1_UA_MIN, OUT_LDO1_UA_MAX, OUT_LDO1_UA_STEP), +}; + +/* LDO operating modes */ +static struct dm_regulator_mode sandbox_ldo_modes[] = { + MODE(LDO_OM_OFF, OM2REG(LDO_OM_OFF), "OFF"), + MODE(LDO_OM_ON, OM2REG(LDO_OM_ON), "ON"), + MODE(LDO_OM_SLEEP, OM2REG(LDO_OM_SLEEP), "SLEEP"), + MODE(LDO_OM_STANDBY, OM2REG(LDO_OM_STANDBY), "STANDBY"), +}; + +int out_get_value(struct udevice *dev, int output_count, int reg_type, + struct output_range *range) +{ + uint8_t reg_val; + uint reg; + int ret; + + if (dev->driver_data > output_count) { + error("Unknown regulator number: %lu for PMIC %s!", + dev->driver_data, dev->name); + return -EINVAL; + } + + reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type; + ret = pmic_read(dev->parent, reg, ®_val, 1); + if (ret) { + error("PMIC read failed: %d\n", ret); + return ret; + } + + ret = REG2VAL(range[dev->driver_data - 1].min, + range[dev->driver_data - 1].step, + reg_val); + + return ret; +} + +static int out_set_value(struct udevice *dev, int output_count, int reg_type, + struct output_range *range, int value) +{ + uint8_t reg_val; + uint reg; + int ret; + int max_value; + + if (dev->driver_data > output_count) { + error("Unknown regulator number: %lu for PMIC %s!", + dev->driver_data, dev->name); + return -EINVAL; + } + + max_value = range[dev->driver_data - 1].max; + if (value > max_value) { + error("Wrong value for %s: %lu. Max is: %d.", + dev->name, dev->driver_data, max_value); + return -EINVAL; + } + + reg_val = VAL2REG(range[dev->driver_data - 1].min, + range[dev->driver_data - 1].step, + value); + + reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type; + ret = pmic_write(dev->parent, reg, ®_val, 1); + if (ret) { + error("PMIC write failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int out_get_mode(struct udevice *dev) +{ + struct dm_regulator_uclass_platdata *uc_pdata; + uint8_t reg_val; + uint reg; + int ret; + int i; + + uc_pdata = dev_get_uclass_platdata(dev); + + reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM; + ret = pmic_read(dev->parent, reg, ®_val, 1); + if (ret) { + error("PMIC read failed: %d\n", ret); + return ret; + } + + for (i = 0; i < uc_pdata->mode_count; i++) { + if (reg_val == uc_pdata->mode[i].register_value) + return uc_pdata->mode[i].id; + } + + error("Unknown operation mode for %s!", dev->name); + return -EINVAL; +} + +static int out_set_mode(struct udevice *dev, int mode) +{ + struct dm_regulator_uclass_platdata *uc_pdata; + int reg_val = -1; + uint reg; + int ret; + int i; + + uc_pdata = dev_get_uclass_platdata(dev); + + if (mode >= uc_pdata->mode_count) + return -EINVAL; + + for (i = 0; i < uc_pdata->mode_count; i++) { + if (mode == uc_pdata->mode[i].id) { + reg_val = uc_pdata->mode[i].register_value; + break; + } + } + + if (reg_val == -1) { + error("Unknown operation mode for %s!", dev->name); + return -EINVAL; + } + + reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM; + ret = pmic_write(dev->parent, reg, (uint8_t *)®_val, 1); + if (ret) { + error("PMIC write failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int buck_get_voltage(struct udevice *dev) +{ + return out_get_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UV, + buck_voltage_range); +} + +static int buck_set_voltage(struct udevice *dev, int uV) +{ + return out_set_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UV, + buck_voltage_range, uV); +} + +static int buck_get_current(struct udevice *dev) +{ + /* BUCK2 - unsupported */ + if (dev->driver_data == 2) + return -ENOSYS; + + return out_get_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UA, + buck_current_range); +} + +static int buck_set_current(struct udevice *dev, int uA) +{ + /* BUCK2 - unsupported */ + if (dev->driver_data == 2) + return -ENOSYS; + + return out_set_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UA, + buck_current_range, uA); +} + +static bool buck_get_enable(struct udevice *dev) +{ + if (out_get_mode(dev) == BUCK_OM_OFF) + return false; + + return true; +} + +static int buck_set_enable(struct udevice *dev, bool enable) +{ + return out_set_mode(dev, enable ? BUCK_OM_ON : BUCK_OM_OFF); +} + +static int sandbox_buck_probe(struct udevice *dev) +{ + struct dm_regulator_uclass_platdata *uc_pdata; + + uc_pdata = dev_get_uclass_platdata(dev); + + uc_pdata->type = REGULATOR_TYPE_BUCK; + uc_pdata->mode = sandbox_buck_modes; + uc_pdata->mode_count = ARRAY_SIZE(sandbox_buck_modes); + + return 0; +} + +static const struct dm_regulator_ops sandbox_buck_ops = { + .get_value = buck_get_voltage, + .set_value = buck_set_voltage, + .get_current = buck_get_current, + .set_current = buck_set_current, + .get_enable = buck_get_enable, + .set_enable = buck_set_enable, + .get_mode = out_get_mode, + .set_mode = out_set_mode, +}; + +U_BOOT_DRIVER(sandbox_buck) = { + .name = SANDBOX_BUCK_DRIVER, + .id = UCLASS_REGULATOR, + .ops = &sandbox_buck_ops, + .probe = sandbox_buck_probe, +}; + +static int ldo_get_voltage(struct udevice *dev) +{ + return out_get_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UV, + ldo_voltage_range); +} + +static int ldo_set_voltage(struct udevice *dev, int uV) +{ + return out_set_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UV, + ldo_voltage_range, uV); +} + +static int ldo_get_current(struct udevice *dev) +{ + /* LDO2 - unsupported */ + if (dev->driver_data == 2) + return -ENOSYS; + + return out_get_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UA, + ldo_current_range); +} + +static int ldo_set_current(struct udevice *dev, int uA) +{ + /* LDO2 - unsupported */ + if (dev->driver_data == 2) + return -ENOSYS; + + return out_set_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UA, + ldo_current_range, uA); +} + +static bool ldo_get_enable(struct udevice *dev) +{ + if (out_get_mode(dev) == LDO_OM_OFF) + return false; + + return true; +} + +static int ldo_set_enable(struct udevice *dev, bool enable) +{ + return out_set_mode(dev, enable ? LDO_OM_ON : LDO_OM_OFF); +} + +static int sandbox_ldo_probe(struct udevice *dev) +{ + struct dm_regulator_uclass_platdata *uc_pdata; + + uc_pdata = dev_get_uclass_platdata(dev); + + uc_pdata->type = REGULATOR_TYPE_LDO; + uc_pdata->mode = sandbox_ldo_modes; + uc_pdata->mode_count = ARRAY_SIZE(sandbox_ldo_modes); + + return 0; +} + +static const struct dm_regulator_ops sandbox_ldo_ops = { + .get_value = ldo_get_voltage, + .set_value = ldo_set_voltage, + .get_current = ldo_get_current, + .set_current = ldo_set_current, + .get_enable = ldo_get_enable, + .set_enable = ldo_set_enable, + .get_mode = out_get_mode, + .set_mode = out_set_mode, +}; + +U_BOOT_DRIVER(sandbox_ldo) = { + .name = SANDBOX_LDO_DRIVER, + .id = UCLASS_REGULATOR, + .ops = &sandbox_ldo_ops, + .probe = sandbox_ldo_probe, +}; |