summaryrefslogtreecommitdiff
path: root/drivers/pcnet.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pcnet.c')
-rw-r--r--drivers/pcnet.c526
1 files changed, 526 insertions, 0 deletions
diff --git a/drivers/pcnet.c b/drivers/pcnet.c
new file mode 100644
index 0000000..f69cd2c
--- /dev/null
+++ b/drivers/pcnet.c
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de.
+ *
+ * This driver for AMD PCnet network controllers is derived from the
+ * Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if 0
+#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */
+#endif
+
+#if PCNET_DEBUG_LEVEL > 0
+#define DEBUG1(fmt,args...) printf (fmt ,##args)
+#if PCNET_DEBUG_LEVEL > 1
+#define DEBUG2(fmt,args...) printf (fmt ,##args)
+#else
+#define DEBUG2(fmt,args...)
+#endif
+#else
+#define DEBUG1(fmt,args...)
+#define DEBUG2(fmt,args...)
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+ && defined(CONFIG_PCNET)
+
+#if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975)
+#error "Macro for PCnet chip version is not defined!"
+#endif
+
+/*
+ * Set the number of Tx and Rx buffers, using Log_2(# buffers).
+ * Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
+ * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
+ */
+#define PCNET_LOG_TX_BUFFERS 0
+#define PCNET_LOG_RX_BUFFERS 2
+
+#define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS))
+#define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12)
+
+#define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS))
+#define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4)
+
+#define PKT_BUF_SZ 1544
+
+/* The PCNET Rx and Tx ring descriptors. */
+struct pcnet_rx_head {
+ u32 base;
+ s16 buf_length;
+ s16 status;
+ u32 msg_length;
+ u32 reserved;
+};
+
+struct pcnet_tx_head {
+ u32 base;
+ s16 length;
+ s16 status;
+ u32 misc;
+ u32 reserved;
+};
+
+/* The PCNET 32-Bit initialization block, described in databook. */
+struct pcnet_init_block {
+ u16 mode;
+ u16 tlen_rlen;
+ u8 phys_addr[6];
+ u16 reserved;
+ u32 filter[2];
+ /* Receive and transmit ring base, along with extra bits. */
+ u32 rx_ring;
+ u32 tx_ring;
+ u32 reserved2;
+};
+
+typedef struct pcnet_priv {
+ struct pcnet_rx_head rx_ring[RX_RING_SIZE];
+ struct pcnet_tx_head tx_ring[TX_RING_SIZE];
+ struct pcnet_init_block init_block;
+ /* Receive Buffer space */
+ unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
+ int cur_rx;
+ int cur_tx;
+} pcnet_priv_t;
+
+static pcnet_priv_t *lp;
+
+/* Offsets from base I/O address for WIO mode */
+#define PCNET_RDP 0x10
+#define PCNET_RAP 0x12
+#define PCNET_RESET 0x14
+#define PCNET_BDP 0x16
+
+static u16 pcnet_read_csr (struct eth_device *dev, int index)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ return inw (dev->iobase+PCNET_RDP);
+}
+
+static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ outw (val, dev->iobase+PCNET_RDP);
+}
+
+static u16 pcnet_read_bcr (struct eth_device *dev, int index)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ return inw (dev->iobase+PCNET_BDP);
+}
+
+static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ outw (val, dev->iobase+PCNET_BDP);
+}
+
+static void pcnet_reset (struct eth_device *dev)
+{
+ inw (dev->iobase+PCNET_RESET);
+}
+
+static int pcnet_check (struct eth_device *dev)
+{
+ outw (88, dev->iobase+PCNET_RAP);
+ return (inw (dev->iobase+PCNET_RAP) == 88);
+}
+
+static int pcnet_init( struct eth_device* dev, bd_t *bis);
+static int pcnet_send (struct eth_device* dev, volatile void *packet,
+ int length);
+static int pcnet_recv (struct eth_device* dev);
+static void pcnet_halt (struct eth_device* dev);
+static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_num);
+
+#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a))
+#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
+
+static struct pci_device_id supported[] = {
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE },
+ { }
+};
+
+
+int pcnet_initialize(bd_t *bis)
+{
+ pci_dev_t devbusfn;
+ struct eth_device* dev;
+ u16 command, status;
+ int dev_nr = 0;
+
+ DEBUG1("\npcnet_initialize...\n");
+
+ for (dev_nr = 0; ; dev_nr++) {
+
+ /*
+ * Find the PCnet PCI device(s).
+ */
+ if ((devbusfn = pci_find_devices(supported, dev_nr)) < 0) {
+ break;
+ }
+
+ /*
+ * Allocate and pre-fill the device structure.
+ */
+ dev = (struct eth_device*) malloc(sizeof *dev);
+ dev->priv = (void *)devbusfn;
+ sprintf(dev->name, "pcnet#%d", dev_nr);
+
+ /*
+ * Setup the PCI device.
+ */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &dev->iobase);
+ dev->iobase &= ~0xf;
+
+ DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
+ dev->name, devbusfn, dev->iobase);
+
+ command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+ pci_write_config_word(devbusfn, PCI_COMMAND, command);
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ if ((status & command) != command) {
+ printf("%s: Couldn't enable IO access or Bus Mastering\n",
+ dev->name);
+ free(dev);
+ continue;
+ }
+
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
+
+ /*
+ * Probe the PCnet chip.
+ */
+ if (pcnet_probe(dev, bis, dev_nr) < 0) {
+ free(dev);
+ continue;
+ }
+
+ /*
+ * Setup device structure and register the driver.
+ */
+ dev->init = pcnet_init;
+ dev->halt = pcnet_halt;
+ dev->send = pcnet_send;
+ dev->recv = pcnet_recv;
+
+ eth_register(dev);
+ }
+
+ udelay(10 * 1000);
+
+ return dev_nr;
+}
+
+static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr)
+{
+ int chip_version;
+ char *chipname;
+#ifdef PCNET_HAS_PROM
+ int i;
+#endif
+
+ /* Reset the PCnet controller */
+ pcnet_reset(dev);
+
+ /* Check if register access is working */
+ if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
+ printf("%s: CSR register access check failed\n", dev->name);
+ return -1;
+ }
+
+ /* Identify the chip */
+ chip_version = pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev,89) << 16);
+ if ((chip_version & 0xfff) != 0x003)
+ return -1;
+ chip_version = (chip_version >> 12) & 0xffff;
+ switch (chip_version) {
+#ifdef CONFIG_PCNET_79C973
+ case 0x2625:
+ chipname = "PCnet/FAST III 79C973"; /* PCI */
+ break;
+#endif
+#ifdef CONFIG_PCNET_79C975
+ case 0x2627:
+ chipname = "PCnet/FAST III 79C975"; /* PCI */
+ break;
+#endif
+ default:
+ printf("%s: PCnet version %#x not supported\n",
+ dev->name, chip_version);
+ return -1;
+ }
+
+ DEBUG1("AMD %s\n", chipname);
+
+#ifdef PCNET_HAS_PROM
+ /*
+ * In most chips, after a chip reset, the ethernet address is read from
+ * the station address PROM at the base address and programmed into the
+ * "Physical Address Registers" CSR12-14.
+ */
+ for (i = 0; i < 3; i++) {
+ unsigned int val;
+ val = pcnet_read_csr(dev, i+12) & 0x0ffff;
+ /* There may be endianness issues here. */
+ dev->dev_addr[2*i] = val & 0x0ff;
+ dev->dev_addr[2*i+1] = (val >> 8) & 0x0ff;
+ }
+#endif /* PCNET_HAS_PROM */
+
+ return 0;
+}
+
+static int pcnet_init(struct eth_device* dev, bd_t *bis)
+{
+ int i, val;
+ u32 addr;
+
+ DEBUG1("%s: pcnet_init...\n", dev->name);
+
+ /* Switch pcnet to 32bit mode */
+ pcnet_write_bcr (dev, 20, 2);
+
+#ifdef CONFIG_PN62
+ /* Setup LED registers */
+ val = pcnet_read_bcr (dev, 2) | 0x1000;
+ pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
+ pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
+ pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
+ pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
+ pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
+#endif
+
+ /* Set/reset autoselect bit */
+ val = pcnet_read_bcr (dev, 2) & ~2;
+ val |= 2;
+ pcnet_write_bcr (dev, 2, val);
+
+ /* Enable auto negotiate, setup, disable fd */
+ val = pcnet_read_bcr(dev, 32) & ~0x98;
+ val |= 0x20;
+ pcnet_write_bcr(dev, 32, val);
+
+ /*
+ * We only maintain one structure because the drivers will never
+ * be used concurrently. In 32bit mode the RX and TX ring entries
+ * must be aligned on 16-byte boundaries.
+ */
+ if (lp == NULL) {
+ addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10);
+ addr = (addr + 0xf) & ~0xf;
+ lp = (pcnet_priv_t *)addr;
+ }
+
+ lp->init_block.mode = cpu_to_le16(0x0000);
+ lp->init_block.filter[0] = 0x00000000;
+ lp->init_block.filter[1] = 0x00000000;
+
+ /*
+ * Initialize the Rx ring.
+ */
+ lp->cur_rx = 0;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
+ lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
+ lp->rx_ring[i].status = cpu_to_le16(0x8000);
+ DEBUG1("Rx%d: base=0x%x buf_length=0x%x status=0x%x\n",
+ i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
+ lp->rx_ring[i].status);
+ }
+
+ /*
+ * Initialize the Tx ring. The Tx buffer address is filled in as
+ * needed, but we do need to clear the upper ownership bit.
+ */
+ lp->cur_tx = 0;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ lp->tx_ring[i].base = 0;
+ lp->tx_ring[i].status = 0;
+ }
+
+ /*
+ * Setup Init Block.
+ */
+ DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
+
+ for (i = 0; i < 6; i++) {
+ lp->init_block.phys_addr[i] = dev->enetaddr[i];
+ DEBUG1(" %02x", lp->init_block.phys_addr[i]);
+ }
+
+ lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
+ RX_RING_LEN_BITS);
+ lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
+ lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
+
+ DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+ lp->init_block.tlen_rlen,
+ lp->init_block.rx_ring, lp->init_block.tx_ring);
+
+ /*
+ * Tell the controller where the Init Block is located.
+ */
+ addr = PCI_TO_MEM(dev, &lp->init_block);
+ pcnet_write_csr(dev, 1, addr & 0xffff);
+ pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
+
+ pcnet_write_csr (dev, 4, 0x0915);
+ pcnet_write_csr (dev, 0, 0x0001); /* start */
+
+ /* Wait for Init Done bit */
+ for (i = 10000; i > 0; i--) {
+ if (pcnet_read_csr (dev, 0) & 0x0100)
+ break;
+ udelay(10);
+ }
+ if (i <= 0) {
+ printf("%s: TIMEOUT: controller init failed\n", dev->name);
+ pcnet_reset (dev);
+ return 0;
+ }
+
+ /*
+ * Finally start network controller operation.
+ */
+ pcnet_write_csr (dev, 0, 0x0002);
+
+ return 1;
+}
+
+static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len)
+{
+ int i, status;
+ struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
+
+ DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet);
+
+ /* Wait for completion by testing the OWN bit */
+ for (i = 1000; i > 0; i--) {
+ status = le16_to_cpu(entry->status);
+ if ((status & 0x8000) == 0)
+ break;
+ udelay(100);
+ DEBUG2(".");
+ }
+ if (i <= 0) {
+ printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
+ dev->name, lp->cur_tx, status);
+ pkt_len = 0;
+ goto failure;
+ }
+
+ /*
+ * Setup Tx ring. Caution: the write order is important here,
+ * set the status with the "ownership" bits last.
+ */
+ status = 0x8300;
+ entry->length = le16_to_cpu(-pkt_len);
+ entry->misc = 0x00000000;
+ entry->base = PCI_TO_MEM_LE(dev, packet);
+ entry->status = le16_to_cpu(status);
+
+ /* Trigger an immediate send poll. */
+ pcnet_write_csr (dev, 0, 0x0008);
+
+ failure:
+ if (++lp->cur_tx >= TX_RING_SIZE)
+ lp->cur_tx = 0;
+
+ DEBUG2("done\n");
+ return pkt_len;
+}
+
+static int pcnet_recv(struct eth_device* dev)
+{
+ struct pcnet_rx_head *entry;
+ int pkt_len = 0;
+ u16 status;
+
+ while (1) {
+ entry = &lp->rx_ring[lp->cur_rx];
+ /*
+ * If we own the next entry, it's a new packet. Send it up.
+ */
+ if (((status = le16_to_cpu(entry->status)) & 0x8000) != 0) {
+ break;
+ }
+ status >>= 8;
+
+ if (status != 0x03) { /* There was an error. */
+
+ printf("%s: Rx%d", dev->name, lp->cur_rx);
+ DEBUG1(" (status=0x%x)", status);
+ if (status & 0x20) printf(" Frame");
+ if (status & 0x10) printf(" Overflow");
+ if (status & 0x08) printf(" CRC");
+ if (status & 0x04) printf(" Fifo");
+ printf(" Error\n");
+ entry->status &= le16_to_cpu(0x03ff);
+
+ } else {
+
+ pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4;
+ if (pkt_len < 60) {
+ printf("%s: Rx%d: invalid packet length %d\n",
+ dev->name, lp->cur_rx, pkt_len);
+ } else {
+ NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
+ DEBUG2("Rx%d: %d bytes from 0x%p\n",
+ lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]);
+ }
+ }
+ entry->status |= cpu_to_le16(0x8000);
+
+ if (++lp->cur_rx >= RX_RING_SIZE)
+ lp->cur_rx = 0;
+ }
+ return pkt_len;
+}
+
+static void pcnet_halt(struct eth_device* dev)
+{
+ int i;
+
+ DEBUG1("%s: pcnet_halt...\n", dev->name);
+
+ /* Reset the PCnet controller */
+ pcnet_reset (dev);
+
+ /* Wait for Stop bit */
+ for (i = 1000; i > 0; i--) {
+ if (pcnet_read_csr (dev, 0) & 0x4)
+ break;
+ udelay(10);
+ }
+ if (i <= 0) {
+ printf("%s: TIMEOUT: controller reset failed\n", dev->name);
+ }
+}
+
+#endif
generated by cgit v1.1 at 2024-11-16 00:23:44 +0000