diff options
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r-- | drivers/pci/pci.c | 526 |
1 files changed, 526 insertions, 0 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c new file mode 100644 index 0000000..50ca6b0 --- /dev/null +++ b/drivers/pci/pci.c @@ -0,0 +1,526 @@ +/* + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Andreas Heppel <aheppel@sysgo.de> + * + * (C) Copyright 2002, 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI routines + */ + +#include <common.h> + +#ifdef CONFIG_PCI + +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +#define PCI_HOSE_OP(rw, size, type) \ +int pci_hose_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, \ + int offset, type value) \ +{ \ + return hose->rw##_##size(hose, dev, offset, value); \ +} + +PCI_HOSE_OP(read, byte, u8 *) +PCI_HOSE_OP(read, word, u16 *) +PCI_HOSE_OP(read, dword, u32 *) +PCI_HOSE_OP(write, byte, u8) +PCI_HOSE_OP(write, word, u16) +PCI_HOSE_OP(write, dword, u32) + +#ifndef CONFIG_IXP425 +#define PCI_OP(rw, size, type, error_code) \ +int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \ +{ \ + struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \ + \ + if (!hose) \ + { \ + error_code; \ + return -1; \ + } \ + \ + return pci_hose_##rw##_config_##size(hose, dev, offset, value); \ +} + +PCI_OP(read, byte, u8 *, *value = 0xff) +PCI_OP(read, word, u16 *, *value = 0xffff) +PCI_OP(read, dword, u32 *, *value = 0xffffffff) +PCI_OP(write, byte, u8, ) +PCI_OP(write, word, u16, ) +PCI_OP(write, dword, u32, ) +#endif /* CONFIG_IXP425 */ + +#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \ +int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ + pci_dev_t dev, \ + int offset, type val) \ +{ \ + u32 val32; \ + \ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ + return -1; \ + } \ + \ + *val = (val32 >> ((offset & (int)off_mask) * 8)); \ + \ + return 0; \ +} + +#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \ +int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\ + pci_dev_t dev, \ + int offset, type val) \ +{ \ + u32 val32, mask, ldata, shift; \ + \ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + return -1; \ + \ + shift = ((offset & (int)off_mask) * 8); \ + ldata = (((unsigned long)val) & val_mask) << shift; \ + mask = val_mask << shift; \ + val32 = (val32 & ~mask) | ldata; \ + \ + if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\ + return -1; \ + \ + return 0; \ +} + +PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03) +PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02) +PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff) +PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) + +/* + * + */ + +static struct pci_controller* hose_head = NULL; + +void pci_register_hose(struct pci_controller* hose) +{ + struct pci_controller **phose = &hose_head; + + while(*phose) + phose = &(*phose)->next; + + hose->next = NULL; + + *phose = hose; +} + +struct pci_controller *pci_bus_to_hose (int bus) +{ + struct pci_controller *hose; + + for (hose = hose_head; hose; hose = hose->next) + if (bus >= hose->first_busno && bus <= hose->last_busno) + return hose; + + printf("pci_bus_to_hose() failed\n"); + return NULL; +} + +#ifndef CONFIG_IXP425 +pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) +{ + struct pci_controller * hose; + u16 vendor, device; + u8 header_type; + pci_dev_t bdf; + int i, bus, found_multi = 0; + + for (hose = hose_head; hose; hose = hose->next) + { +#ifdef CFG_SCSI_SCAN_BUS_REVERSE + for (bus = hose->last_busno; bus >= hose->first_busno; bus--) +#else + for (bus = hose->first_busno; bus <= hose->last_busno; bus++) +#endif + for (bdf = PCI_BDF(bus,0,0); +#if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX) + bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); +#else + bdf < PCI_BDF(bus+1,0,0); +#endif + bdf += PCI_BDF(0,0,1)) + { + if (!PCI_FUNC(bdf)) { + pci_read_config_byte(bdf, + PCI_HEADER_TYPE, + &header_type); + + found_multi = header_type & 0x80; + } else { + if (!found_multi) + continue; + } + + pci_read_config_word(bdf, + PCI_VENDOR_ID, + &vendor); + pci_read_config_word(bdf, + PCI_DEVICE_ID, + &device); + + for (i=0; ids[i].vendor != 0; i++) + if (vendor == ids[i].vendor && + device == ids[i].device) + { + if (index <= 0) + return bdf; + + index--; + } + } + } + + return (-1); +} +#endif /* CONFIG_IXP425 */ + +pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) +{ + static struct pci_device_id ids[2] = {{}, {0, 0}}; + + ids[0].vendor = vendor; + ids[0].device = device; + + return pci_find_devices(ids, index); +} + +/* + * + */ + +unsigned long pci_hose_phys_to_bus (struct pci_controller *hose, + unsigned long phys_addr, + unsigned long flags) +{ + struct pci_region *res; + unsigned long bus_addr; + int i; + + if (!hose) { + printf ("pci_hose_phys_to_bus: %s\n", "invalid hose"); + goto Done; + } + + for (i = 0; i < hose->region_count; i++) { + res = &hose->regions[i]; + + if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) + continue; + + bus_addr = phys_addr - res->phys_start + res->bus_start; + + if (bus_addr >= res->bus_start && + bus_addr < res->bus_start + res->size) { + return bus_addr; + } + } + + printf ("pci_hose_phys_to_bus: %s\n", "invalid physical address"); + +Done: + return 0; +} + +unsigned long pci_hose_bus_to_phys(struct pci_controller* hose, + unsigned long bus_addr, + unsigned long flags) +{ + struct pci_region *res; + int i; + + if (!hose) { + printf ("pci_hose_bus_to_phys: %s\n", "invalid hose"); + goto Done; + } + + for (i = 0; i < hose->region_count; i++) { + res = &hose->regions[i]; + + if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) + continue; + + if (bus_addr >= res->bus_start && + bus_addr < res->bus_start + res->size) { + return bus_addr - res->bus_start + res->phys_start; + } + } + + printf ("pci_hose_bus_to_phys: %s\n", "invalid physical address"); + +Done: + return 0; +} + +/* + * + */ + +int pci_hose_config_device(struct pci_controller *hose, + pci_dev_t dev, + unsigned long io, + unsigned long mem, + unsigned long command) +{ + unsigned int bar_response, bar_size, bar_value, old_command; + unsigned char pin; + int bar, found_mem64; + + debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n", + io, mem, command); + + pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); + + for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) { + pci_hose_write_config_dword (hose, dev, bar, 0xffffffff); + pci_hose_read_config_dword (hose, dev, bar, &bar_response); + + if (!bar_response) + continue; + + found_mem64 = 0; + + /* Check the BAR type and set our address mask */ + if (bar_response & PCI_BASE_ADDRESS_SPACE) { + bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; + /* round up region base address to a multiple of size */ + io = ((io - 1) | (bar_size - 1)) + 1; + bar_value = io; + /* compute new region base address */ + io = io + bar_size; + } else { + if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == + PCI_BASE_ADDRESS_MEM_TYPE_64) + found_mem64 = 1; + + bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; + + /* round up region base address to multiple of size */ + mem = ((mem - 1) | (bar_size - 1)) + 1; + bar_value = mem; + /* compute new region base address */ + mem = mem + bar_size; + } + + /* Write it out and update our limit */ + pci_hose_write_config_dword (hose, dev, bar, bar_value); + + if (found_mem64) { + bar += 4; + pci_hose_write_config_dword (hose, dev, bar, 0x00000000); + } + } + + /* Configure Cache Line Size Register */ + pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* Configure Latency Timer */ + pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80); + + /* Disable interrupt line, if device says it wants to use interrupts */ + pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin); + if (pin != 0) { + pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff); + } + + pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command); + pci_hose_write_config_dword (hose, dev, PCI_COMMAND, + (old_command & 0xffff0000) | command); + + return 0; +} + +/* + * + */ + +struct pci_config_table *pci_find_config(struct pci_controller *hose, + unsigned short class, + unsigned int vendor, + unsigned int device, + unsigned int bus, + unsigned int dev, + unsigned int func) +{ + struct pci_config_table *table; + + for (table = hose->config_table; table && table->vendor; table++) { + if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) && + (table->device == PCI_ANY_ID || table->device == device) && + (table->class == PCI_ANY_ID || table->class == class) && + (table->bus == PCI_ANY_ID || table->bus == bus) && + (table->dev == PCI_ANY_ID || table->dev == dev) && + (table->func == PCI_ANY_ID || table->func == func)) { + return table; + } + } + + return NULL; +} + +void pci_cfgfunc_config_device(struct pci_controller *hose, + pci_dev_t dev, + struct pci_config_table *entry) +{ + pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]); +} + +void pci_cfgfunc_do_nothing(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *entry) +{ +} + +/* + * + */ + +/* HJF: Changed this to return int. I think this is required + * to get the correct result when scanning bridges + */ +extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); +extern void pciauto_config_init(struct pci_controller *hose); + +int pci_hose_scan_bus(struct pci_controller *hose, int bus) +{ + unsigned int sub_bus, found_multi=0; + unsigned short vendor, device, class; + unsigned char header_type; + struct pci_config_table *cfg; + pci_dev_t dev; + + sub_bus = bus; + + for (dev = PCI_BDF(bus,0,0); + dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); + dev += PCI_BDF(0,0,1)) + { + /* Skip our host bridge */ + if ( dev == PCI_BDF(hose->first_busno,0,0) ) { +#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ + /* + * Only skip hostbridge configuration if "pciconfighost" is not set + */ + if (getenv("pciconfighost") == NULL) { + continue; /* Skip our host bridge */ + } +#else + continue; /* Skip our host bridge */ +#endif + } + + if (PCI_FUNC(dev) && !found_multi) + continue; + + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); + + pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); + + if (vendor != 0xffff && vendor != 0x0000) { + + if (!PCI_FUNC(dev)) + found_multi = header_type & 0x80; + + debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n", + PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) ); + + pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); + pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); + + cfg = pci_find_config(hose, class, vendor, device, + PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); + if (cfg) { + cfg->config_device(hose, dev, cfg); + sub_bus = max(sub_bus, hose->current_busno); +#ifdef CONFIG_PCI_PNP + } else { + int n = pciauto_config_device(hose, dev); + + sub_bus = max(sub_bus, n); +#endif + } + if (hose->fixup_irq) + hose->fixup_irq(hose, dev); + +#ifdef CONFIG_PCI_SCAN_SHOW + /* Skip our host bridge */ + if ( dev != PCI_BDF(hose->first_busno,0,0) ) { + unsigned char int_line; + + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE, + &int_line); + printf(" %02x %02x %04x %04x %04x %02x\n", + PCI_BUS(dev), PCI_DEV(dev), vendor, device, class, + int_line); + } +#endif + } + } + + return sub_bus; +} + +int pci_hose_scan(struct pci_controller *hose) +{ + /* Start scan at current_busno. + * PCIe will start scan at first_busno+1. + */ + /* For legacy support, ensure current>=first */ + if (hose->first_busno > hose->current_busno) + hose->current_busno = hose->first_busno; +#ifdef CONFIG_PCI_PNP + pciauto_config_init(hose); +#endif + return pci_hose_scan_bus(hose, hose->current_busno); +} + +void pci_init(void) +{ +#if defined(CONFIG_PCI_BOOTDELAY) + char *s; + int i; + + /* wait "pcidelay" ms (if defined)... */ + s = getenv ("pcidelay"); + if (s) { + int val = simple_strtoul (s, NULL, 10); + for (i=0; i<val; i++) + udelay (1000); + } +#endif /* CONFIG_PCI_BOOTDELAY */ + + /* now call board specific pci_init()... */ + pci_init_board(); +} + +#endif /* CONFIG_PCI */ |