diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/cs8900.c | 9 | ||||
-rw-r--r-- | drivers/net/dm9000x.c | 26 | ||||
-rw-r--r-- | drivers/net/fec_mxc.c | 20 | ||||
-rw-r--r-- | drivers/net/smc91111.h | 8 | ||||
-rw-r--r-- | drivers/net/smc911x.c | 4 |
5 files changed, 37 insertions, 30 deletions
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c index 587f7f6..df36004 100644 --- a/drivers/net/cs8900.c +++ b/drivers/net/cs8900.c @@ -56,7 +56,7 @@ #define REG_READ(a) readl((a)) /* we don't need 16 bit initialisation on 32 bit bus */ -#define get_reg_init_bus(x) get_reg((x)) +#define get_reg_init_bus(r,d) get_reg((r),(d)) #else @@ -321,15 +321,16 @@ int cs8900_initialize(u8 dev_num, int base_addr) memset(priv, 0, sizeof(*priv)); priv->regs = (struct cs8900_regs *)base_addr; - /* Load MAC address from EEPROM */ - cs8900_get_enetaddr(dev); - dev->iobase = base_addr; dev->priv = priv; dev->init = cs8900_init; dev->halt = cs8900_halt; dev->send = cs8900_send; dev->recv = cs8900_recv; + + /* Load MAC address from EEPROM */ + cs8900_get_enetaddr(dev); + sprintf(dev->name, "%s-%hu", CS8900_DRIVERNAME, dev_num); eth_register(dev); diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index efe9135..73dd335 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -284,7 +284,6 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) int i, oft, lnk; u8 io_mode; struct board_info *db = &dm9000_info; - uchar enetaddr[6]; DM9000_DBG("%s\n", __func__); @@ -342,20 +341,11 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) /* Clear interrupt status */ DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS); - /* Set Node address */ - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { -#if !defined(CONFIG_DM9000_NO_SROM) - for (i = 0; i < 3; i++) - dm9000_read_srom_word(i, enetaddr + 2 * i); - eth_setenv_enetaddr("ethaddr", enetaddr); -#endif - } - - printf("MAC: %pM\n", enetaddr); + printf("MAC: %pM\n", dev->enetaddr); /* fill device MAC address registers */ for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++) - DM9000_iow(oft, enetaddr[i]); + DM9000_iow(oft, dev->enetaddr[i]); for (i = 0, oft = 0x16; i < 8; i++, oft++) DM9000_iow(oft, 0xff); @@ -558,6 +548,15 @@ void dm9000_write_srom_word(int offset, u16 val) } #endif +static void dm9000_get_enetaddr(struct eth_device *dev) +{ +#if !defined(CONFIG_DM9000_NO_SROM) + int i; + for (i = 0; i < 3; i++) + dm9000_read_srom_word(i, dev->enetaddr + (2 * i)); +#endif +} + /* Read a byte from I/O port */ @@ -621,6 +620,9 @@ int dm9000_initialize(bd_t *bis) { struct eth_device *dev = &(dm9000_info.netdev); + /* Load MAC address from EEPROM */ + dm9000_get_enetaddr(dev); + dev->init = dm9000_init; dev->halt = dm9000_halt; dev->send = dm9000_send; diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index bd83a24..ad07307 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -55,6 +55,8 @@ struct fec_priv gfec = { .tbd_base = NULL, .tbd_index = 0, .bd = NULL, + .rdb_ptr = NULL, + .base_ptr = NULL, }; /* @@ -157,7 +159,9 @@ static int miiphy_restart_aneg(struct eth_device *dev) /* * Set the auto-negotiation advertisement register bits */ - miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR, 0x1e0); + miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR, + PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD | + PHY_ANLPAR_10 | PHY_ANLPAR_PSB_802_3); miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); @@ -228,7 +232,8 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size) uint32_t p = 0; /* reserve data memory and consider alignment */ - fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT); + if (fec->rdb_ptr == NULL) + fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT); p = (uint32_t)fec->rdb_ptr; if (!p) { puts("fec_imx27: not enough malloc memory!\n"); @@ -341,8 +346,8 @@ static int fec_open(struct eth_device *edev) writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); miiphy_wait_aneg(edev); - miiphy_speed(edev->name, 0); - miiphy_duplex(edev->name, 0); + miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR); + miiphy_duplex(edev->name, CONFIG_FEC_MXC_PHYADDR); /* * Enable SmartDMA receive task @@ -363,8 +368,9 @@ static int fec_init(struct eth_device *dev, bd_t* bd) * Datasheet forces the startaddress of each chain is 16 byte * aligned */ - fec->base_ptr = malloc((2 + FEC_RBD_NUM) * - sizeof(struct fec_bd) + DB_ALIGNMENT); + if (fec->base_ptr == NULL) + fec->base_ptr = malloc((2 + FEC_RBD_NUM) * + sizeof(struct fec_bd) + DB_ALIGNMENT); base = (uint32_t)fec->base_ptr; if (!base) { puts("fec_imx27: not enough malloc memory!\n"); @@ -491,8 +497,6 @@ static void fec_halt(struct eth_device *dev) writel(0, &fec->eth->ecntrl); fec->rbd_index = 0; fec->tbd_index = 0; - free(fec->rdb_ptr); - free(fec->base_ptr); debug("eth_halt: done\n"); } diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index bb45241..895c749 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -81,10 +81,10 @@ struct smc91111_priv{ #ifdef CONFIG_PXA250 #ifdef CONFIG_XSENGINE -#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r<<1)))) -#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r<<1)))) +#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+((r)<<1)))) +#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1)))) #define SMC_inb(a,p) ({ \ - unsigned int __p = (unsigned int)((a)->iobase + (p<<1)); \ + unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \ unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \ if (__p & 2) __v >>= 8; \ else __v &= 0xff; \ @@ -99,7 +99,7 @@ struct smc91111_priv{ __v; }) #define SMC_inb(a,p) ({ \ unsigned int ___v = SMC_inw((a),(p) & ~1); \ - if (p & 1) ___v >>= 8; \ + if ((p) & 1) ___v >>= 8; \ else ___v &= 0xff; \ ___v; }) #else diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index c50758e..c027abe 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -243,7 +243,7 @@ int smc911x_initialize(u8 dev_num, int base_addr) dev = malloc(sizeof(*dev)); if (!dev) { free(dev); - return 0; + return -1; } memset(dev, 0, sizeof(*dev)); @@ -271,5 +271,5 @@ int smc911x_initialize(u8 dev_num, int base_addr) sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num); eth_register(dev); - return 0; + return 1; } |