summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig1
-rw-r--r--drivers/net/designware.c20
-rw-r--r--drivers/net/e1000.c8
-rw-r--r--drivers/net/fec_mxc.c20
-rw-r--r--drivers/net/pch_gbe.c2
-rw-r--r--drivers/net/phy/atheros.c2
-rw-r--r--drivers/net/phy/micrel.c146
-rw-r--r--drivers/net/rtl8169.c84
-rw-r--r--drivers/net/sandbox.c2
9 files changed, 244 insertions, 41 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ae5e78d..de54ca8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW
config ETH_DESIGNWARE
bool "Synopsys Designware Ethernet MAC"
+ select PHYLIB
help
This MAC is present in SoCs from various vendors. It supports
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index a6c39c3..0fccbc0 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -22,10 +22,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_PHYLIB)
-# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB"
-#endif
-
static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
struct eth_mac_regs *mac_p = bus->priv;
@@ -107,8 +103,8 @@ static void tx_descs_init(struct dw_eth_dev *priv)
#if defined(CONFIG_DW_ALTDESCRIPTOR)
desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
- DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
- DESC_TXSTS_TXCHECKINSCTRL | \
+ DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS |
+ DESC_TXSTS_TXCHECKINSCTRL |
DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
@@ -155,7 +151,7 @@ static void rx_descs_init(struct dw_eth_dev *priv)
desc_p->dmamac_next = &desc_table_p[idx + 1];
desc_p->dmamac_cntl =
- (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
+ (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) |
DESC_RXCTRL_RXCHAIN;
desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
@@ -321,14 +317,14 @@ static int _dw_eth_send(struct dw_eth_dev *priv, void *packet, int length)
#if defined(CONFIG_DW_ALTDESCRIPTOR)
desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
- desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
+ desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) &
DESC_TXCTRL_SIZE1MASK;
desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
#else
- desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
- DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
+ desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) &
+ DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST |
DESC_TXCTRL_TXFIRST;
desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
@@ -368,7 +364,7 @@ static int _dw_eth_recv(struct dw_eth_dev *priv, uchar **packetp)
/* Check if the owner is the CPU */
if (!(status & DESC_RXSTS_OWNBYDMA)) {
- length = (status & DESC_RXSTS_FRMLENMSK) >> \
+ length = (status & DESC_RXSTS_FRMLENMSK) >>
DESC_RXSTS_FRMLENSHFT;
/* Invalidate received data */
@@ -588,7 +584,7 @@ static int designware_eth_probe(struct udevice *dev)
* or via a PCI bridge, fill in platdata before we probe the hardware.
*/
if (device_is_on_pci_bus(dev)) {
- pci_dev_t bdf = pci_get_bdf(dev);
+ pci_dev_t bdf = dm_pci_get_bdf(dev);
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
iobase &= PCI_BASE_ADDRESS_MEM_MASK;
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 6be2d9f..70fc02e 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -5096,11 +5096,11 @@ _e1000_poll(struct e1000_hw *hw)
inval_end = inval_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN);
invalidate_dcache_range(inval_start, inval_end);
- if (!(le32_to_cpu(rd->status)) & E1000_RXD_STAT_DD)
+ if (!(rd->status & E1000_RXD_STAT_DD))
return 0;
/* DEBUGOUT("recv: packet len=%d\n", rd->length); */
/* Packet received, make sure the data are re-loaded from RAM. */
- len = le32_to_cpu(rd->length);
+ len = le16_to_cpu(rd->length);
invalidate_dcache_range((unsigned long)packet,
(unsigned long)packet +
roundup(len, ARCH_DMA_MINALIGN));
@@ -5553,8 +5553,8 @@ static int e1000_eth_probe(struct udevice *dev)
int ret;
hw->name = dev->name;
- ret = e1000_init_one(hw, trailing_strtol(dev->name), pci_get_bdf(dev),
- plat->enetaddr);
+ ret = e1000_init_one(hw, trailing_strtol(dev->name),
+ dm_pci_get_bdf(dev), plat->enetaddr);
if (ret < 0) {
printf(pr_fmt("failed to initialize card: %d\n"), ret);
return ret;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 79f6737..3340dd2 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -131,13 +131,25 @@ static void fec_mii_setspeed(struct ethernet_regs *eth)
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ *
+ * The i.MX28 and i.MX6 types have another field in the MSCR (aka
+ * MII_SPEED) register that defines the MDIO output hold time. Earlier
+ * versions are RAZ there, so just ignore the difference and write the
+ * register always.
+ * The minimal hold time according to IEE802.3 (clause 22) is 10 ns.
+ * HOLDTIME + 1 is the number of clk cycles the fec is holding the
+ * output.
+ * The HOLDTIME bitfield takes values between 0 and 7 (inclusive).
+ * Given that ceil(clkrate / 5000000) <= 64, the calculation for
+ * holdtime cannot result in a value greater than 3.
*/
- register u32 speed = DIV_ROUND_UP(imx_get_fecclk(), 5000000);
+ u32 pclk = imx_get_fecclk();
+ u32 speed = DIV_ROUND_UP(pclk, 5000000);
+ u32 hold = DIV_ROUND_UP(pclk, 100000000) - 1;
#ifdef FEC_QUIRK_ENET_MAC
speed--;
#endif
- speed <<= 1;
- writel(speed, &eth->mii_speed);
+ writel(speed << 1 | hold << 8, &eth->mii_speed);
debug("%s: mii_speed %08x\n", __func__, readl(&eth->mii_speed));
}
@@ -1097,6 +1109,7 @@ int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
#ifdef CONFIG_PHYLIB
phydev = phy_find_by_mask(bus, 1 << phy_id, PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
+ mdio_unregister(bus);
free(bus);
return -ENOMEM;
}
@@ -1108,6 +1121,7 @@ int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
#ifdef CONFIG_PHYLIB
free(phydev);
#endif
+ mdio_unregister(bus);
free(bus);
}
return ret;
diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c
index dfc0100..1b4dd56 100644
--- a/drivers/net/pch_gbe.c
+++ b/drivers/net/pch_gbe.c
@@ -424,7 +424,7 @@ int pch_gbe_probe(struct udevice *dev)
pci_dev_t devno;
u32 iobase;
- devno = pci_get_bdf(dev);
+ devno = dm_pci_get_bdf(dev);
/*
* The priv structure contains the descriptors and frame buffers which
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
index d509e30..ba57b1a 100644
--- a/drivers/net/phy/atheros.c
+++ b/drivers/net/phy/atheros.c
@@ -51,7 +51,7 @@ static struct phy_driver AR8031_driver = {
.uid = 0x4dd074,
.mask = 0xffffffef,
.features = PHY_GBIT_FEATURES,
- .config = ar8021_config,
+ .config = ar8035_config,
.startup = genphy_startup,
.shutdown = genphy_shutdown,
};
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5e49666..19b6bc7 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -9,9 +9,14 @@
*/
#include <config.h>
#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
#include <micrel.h>
#include <phy.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static struct phy_driver KSZ804_driver = {
.name = "Micrel KSZ804",
.uid = 0x221510,
@@ -174,6 +179,73 @@ static int ksz90xx_startup(struct phy_device *phydev)
return 0;
}
+/* Common OF config bits for KSZ9021 and KSZ9031 */
+#if defined(CONFIG_PHY_MICREL_KSZ9021) || defined(CONFIG_PHY_MICREL_KSZ9031)
+#ifdef CONFIG_DM_ETH
+struct ksz90x1_reg_field {
+ const char *name;
+ const u8 size; /* Size of the bitfield, in bits */
+ const u8 off; /* Offset from bit 0 */
+ const u8 dflt; /* Default value */
+};
+
+struct ksz90x1_ofcfg {
+ const u16 reg;
+ const u16 devad;
+ const struct ksz90x1_reg_field *grp;
+ const u16 grpsz;
+};
+
+static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = {
+ { "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 },
+ { "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 }
+};
+
+static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = {
+ { "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 },
+ { "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 },
+};
+
+static int ksz90x1_of_config_group(struct phy_device *phydev,
+ struct ksz90x1_ofcfg *ofcfg)
+{
+ struct udevice *dev = phydev->dev;
+ struct phy_driver *drv = phydev->drv;
+ const int ps_to_regval = 200;
+ int val[4];
+ int i, changed = 0, offset, max;
+ u16 regval = 0;
+
+ if (!drv || !drv->writeext)
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < ofcfg->grpsz; i++) {
+ val[i] = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
+ ofcfg->grp[i].name, -1);
+ offset = ofcfg->grp[i].off;
+ if (val[i] == -1) {
+ /* Default register value for KSZ9021 */
+ regval |= ofcfg->grp[i].dflt << offset;
+ } else {
+ changed = 1; /* Value was changed in OF */
+ /* Calculate the register value and fix corner cases */
+ if (val[i] > ps_to_regval * 0xf) {
+ max = (1 << ofcfg->grp[i].size) - 1;
+ regval |= max << offset;
+ } else {
+ regval |= (val[i] / ps_to_regval) << offset;
+ }
+ }
+ }
+
+ if (!changed)
+ return 0;
+
+ return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval);
+}
+#endif
+#endif
+
#ifdef CONFIG_PHY_MICREL_KSZ9021
/*
* KSZ9021
@@ -188,6 +260,35 @@ static int ksz90xx_startup(struct phy_device *phydev)
#define CTRL1000_CONFIG_MASTER (1 << 11)
#define CTRL1000_MANUAL_CONFIG (1 << 12)
+#ifdef CONFIG_DM_ETH
+static const struct ksz90x1_reg_field ksz9021_clk_grp[] = {
+ { "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 },
+ { "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 },
+};
+
+static int ksz9021_of_config(struct phy_device *phydev)
+{
+ struct ksz90x1_ofcfg ofcfg[] = {
+ { MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 },
+ { MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 },
+ { MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 },
+ };
+ int i, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(ofcfg); i++)
+ ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+#else
+static int ksz9021_of_config(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif
+
int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val)
{
/* extended registers */
@@ -224,6 +325,11 @@ static int ksz9021_config(struct phy_device *phydev)
const unsigned master = CTRL1000_PREFER_MASTER |
CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG;
unsigned features = phydev->drv->features;
+ int ret;
+
+ ret = ksz9021_of_config(phydev);
+ if (ret)
+ return ret;
if (getenv("disable_giga"))
features &= ~(SUPPORTED_1000baseT_Half |
@@ -260,6 +366,36 @@ static struct phy_driver ksz9021_driver = {
#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d
#define MII_KSZ9031_MMD_REG_DATA 0x0e
+#ifdef CONFIG_DM_ETH
+static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
+ { { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } };
+static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
+ { { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } };
+
+static int ksz9031_of_config(struct phy_device *phydev)
+{
+ struct ksz90x1_ofcfg ofcfg[] = {
+ { MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 },
+ { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
+ { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
+ { MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 },
+ };
+ int i, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(ofcfg); i++)
+ ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+#else
+static int ksz9031_of_config(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif
+
/* Accessors to extended registers*/
int ksz9031_phy_extended_write(struct phy_device *phydev,
int devaddr, int regnum, u16 mode, u16 val)
@@ -304,13 +440,21 @@ static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
};
+static int ksz9031_config(struct phy_device *phydev)
+{
+ int ret;
+ ret = ksz9031_of_config(phydev);
+ if (ret)
+ return ret;
+ return genphy_config(phydev);
+}
static struct phy_driver ksz9031_driver = {
.name = "Micrel ksz9031",
.uid = 0x221620,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
- .config = &genphy_config,
+ .config = &ksz9031_config,
.startup = &ksz90xx_startup,
.shutdown = &genphy_shutdown,
.writeext = &ksz9031_phy_extwrite,
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 19422c4..9e60adf 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -513,8 +513,13 @@ static void rtl_flush_buffer(void *buf, size_t size)
/**************************************************************************
RECV - Receive a frame
***************************************************************************/
-static int rtl_recv_common(pci_dev_t bdf, unsigned long dev_iobase,
+#ifdef CONFIG_DM_ETH
+static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase,
+ uchar **packetp)
+#else
+static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
uchar **packetp)
+#endif
{
/* return true if there's an ethernet packet ready to read */
/* nic->packet should contain data on return */
@@ -545,9 +550,16 @@ static int rtl_recv_common(pci_dev_t bdf, unsigned long dev_iobase,
else
tpc->RxDescArray[cur_rx].status =
cpu_to_le32(OWNbit + RX_BUF_SIZE);
+#ifdef CONFIG_DM_ETH
tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
- pci_mem_to_phys(bdf, (pci_addr_t)(unsigned long)
+ dm_pci_mem_to_phys(dev,
+ (pci_addr_t)(unsigned long)
+ tpc->RxBufferRing[cur_rx]));
+#else
+ tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
+ pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)
tpc->RxBufferRing[cur_rx]));
+#endif
rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
#ifdef CONFIG_DM_ETH
*packetp = rxdata;
@@ -576,7 +588,7 @@ int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct rtl8169_private *priv = dev_get_priv(dev);
- return rtl_recv_common(pci_get_bdf(dev), priv->iobase, packetp);
+ return rtl_recv_common(dev, priv->iobase, packetp);
}
#else
static int rtl_recv(struct eth_device *dev)
@@ -590,8 +602,13 @@ static int rtl_recv(struct eth_device *dev)
/**************************************************************************
SEND - Transmit a frame
***************************************************************************/
-static int rtl_send_common(pci_dev_t bdf, unsigned long dev_iobase,
+#ifdef CONFIG_DM_ETH
+static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase,
void *packet, int length)
+#else
+static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
+ void *packet, int length)
+#endif
{
/* send the packet to destination */
@@ -618,8 +635,13 @@ static int rtl_send_common(pci_dev_t bdf, unsigned long dev_iobase,
ptxb[len++] = '\0';
tpc->TxDescArray[entry].buf_Haddr = 0;
+#ifdef CONFIG_DM_ETH
tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
- pci_mem_to_phys(bdf, (pci_addr_t)(unsigned long)ptxb));
+ dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
+#else
+ tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
+ pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
+#endif
if (entry != (NUM_TX_DESC - 1)) {
tpc->TxDescArray[entry].status =
cpu_to_le32((OWNbit | FSbit | LSbit) |
@@ -661,7 +683,7 @@ int rtl8169_eth_send(struct udevice *dev, void *packet, int length)
{
struct rtl8169_private *priv = dev_get_priv(dev);
- return rtl_send_common(pci_get_bdf(dev), priv->iobase, packet, length);
+ return rtl_send_common(dev, priv->iobase, packet, length);
}
#else
@@ -695,7 +717,11 @@ static void rtl8169_set_rx_mode(void)
RTL_W32(MAR0 + 4, mc_filter[1]);
}
-static void rtl8169_hw_start(pci_dev_t bdf)
+#ifdef CONFIG_DM_ETH
+static void rtl8169_hw_start(struct udevice *dev)
+#else
+static void rtl8169_hw_start(pci_dev_t dev)
+#endif
{
u32 i;
@@ -740,11 +766,21 @@ static void rtl8169_hw_start(pci_dev_t bdf)
tpc->cur_rx = 0;
- RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(bdf,
+#ifdef CONFIG_DM_ETH
+ RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev,
(pci_addr_t)(unsigned long)tpc->TxDescArray));
+#else
+ RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev,
+ (pci_addr_t)(unsigned long)tpc->TxDescArray));
+#endif
RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
+#ifdef CONFIG_DM_ETH
+ RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys(
+ dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
+#else
RTL_W32(RxDescStartAddrLow, pci_mem_to_phys(
- bdf, (pci_addr_t)(unsigned long)tpc->RxDescArray));
+ dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
+#endif
RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
/* RTL-8169sc/8110sc or later version */
@@ -766,7 +802,11 @@ static void rtl8169_hw_start(pci_dev_t bdf)
#endif
}
-static void rtl8169_init_ring(pci_dev_t bdf)
+#ifdef CONFIG_DM_ETH
+static void rtl8169_init_ring(struct udevice *dev)
+#else
+static void rtl8169_init_ring(pci_dev_t dev)
+#endif
{
int i;
@@ -794,8 +834,13 @@ static void rtl8169_init_ring(pci_dev_t bdf)
cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
+#ifdef CONFIG_DM_ETH
+ tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys(
+ dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
+#else
tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys(
- bdf, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
+ dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
+#endif
rtl_flush_rx_desc(&tpc->RxDescArray[i]);
}
@@ -804,7 +849,11 @@ static void rtl8169_init_ring(pci_dev_t bdf)
#endif
}
-static void rtl8169_common_start(pci_dev_t bdf, unsigned char *enetaddr)
+#ifdef CONFIG_DM_ETH
+static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr)
+#else
+static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr)
+#endif
{
int i;
@@ -813,8 +862,8 @@ static void rtl8169_common_start(pci_dev_t bdf, unsigned char *enetaddr)
printf ("%s\n", __FUNCTION__);
#endif
- rtl8169_init_ring(bdf);
- rtl8169_hw_start(bdf);
+ rtl8169_init_ring(dev);
+ rtl8169_hw_start(dev);
/* Construct a perfect filter frame with the mac address as first match
* and broadcast for all others */
for (i = 0; i < 192; i++)
@@ -837,7 +886,7 @@ static int rtl8169_eth_start(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
- rtl8169_common_start(pci_get_bdf(dev), plat->enetaddr);
+ rtl8169_common_start(dev, plat->enetaddr);
return 0;
}
@@ -1130,10 +1179,9 @@ static int rtl8169_eth_probe(struct udevice *dev)
region = 1;
break;
}
- pci_read_config32(pci_get_bdf(dev), PCI_BASE_ADDRESS_0 + region * 4,
- &iobase);
+ dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0 + region * 4, &iobase);
iobase &= ~0xf;
- priv->iobase = (int)pci_mem_to_phys(pci_get_bdf(dev), iobase);
+ priv->iobase = (int)dm_pci_mem_to_phys(dev, iobase);
ret = rtl_init(priv->iobase, dev->name, plat->enetaddr);
if (ret < 0) {
diff --git a/drivers/net/sandbox.c b/drivers/net/sandbox.c
index 6763a24..d538d37 100644
--- a/drivers/net/sandbox.c
+++ b/drivers/net/sandbox.c
@@ -157,7 +157,7 @@ static int sb_eth_recv(struct udevice *dev, int flags, uchar **packetp)
struct eth_sandbox_priv *priv = dev_get_priv(dev);
if (skip_timeout) {
- sandbox_timer_add_offset(10000UL);
+ sandbox_timer_add_offset(11000UL);
skip_timeout = false;
}
generated by cgit v1.1 at 2024-12-25 15:31:32 +0000