diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/phy/marvell.c | 11 | ||||
| -rw-r--r-- | drivers/net/zynq_gem.c | 199 |
2 files changed, 151 insertions, 59 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4b27198..46801c7 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -465,6 +465,16 @@ static struct phy_driver M88E1149S_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver M88E1518_driver = { + .name = "Marvell 88E1518", + .uid = 0x1410dd1, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1111s_config, + .startup = &m88e1011s_startup, + .shutdown = &genphy_shutdown, +}; + int phy_marvell_init(void) { phy_register(&M88E1149S_driver); @@ -474,6 +484,7 @@ int phy_marvell_init(void) phy_register(&M88E1118R_driver); phy_register(&M88E1111S_driver); phy_register(&M88E1011S_driver); + phy_register(&M88E1518_driver); return 0; } diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 3596065..eac9b6f 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -33,6 +33,8 @@ #include <phy.h> #include <miiphy.h> #include <watchdog.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> #if !defined(CONFIG_PHYLIB) # error XILINX_GEM_ETHERNET requires PHYLIB @@ -67,13 +69,14 @@ #define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */ #define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */ -#define ZYNQ_GEM_NWCFG_SPEED 0x00000001 /* 100 Mbps operation */ -#define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */ -#define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */ +#define ZYNQ_GEM_NWCFG_SPEED100 0x000000001 /* 100 Mbps operation */ +#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */ +#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */ +#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */ #define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */ +#define ZYNQ_GEM_NWCFG_MDCCLKDIV2 0x0000c0000 /* Div pclk by 48, 120MHz */ -#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_SPEED | \ - ZYNQ_GEM_NWCFG_FDEN | \ +#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_FDEN | \ ZYNQ_GEM_NWCFG_FSREM | \ ZYNQ_GEM_NWCFG_MDCCLKDIV) @@ -92,6 +95,17 @@ ZYNQ_GEM_DMACR_TXSIZE | \ ZYNQ_GEM_DMACR_RXBUF) +/* Use MII register 1 (MII status register) to detect PHY */ +#define PHY_DETECT_REG 1 + +/* Mask used to verify certain PHY features (or register contents) + * in the register above: + * 0x1000: 10Mbps full duplex support + * 0x0800: 10Mbps half duplex support + * 0x0008: Auto-negotiation support + */ +#define PHY_DETECT_MASK 0x1808 + /* Device registers */ struct zynq_gem_regs { u32 nwctrl; /* Network Control reg */ @@ -134,6 +148,8 @@ struct zynq_gem_priv { u32 rxbd_current; u32 rx_first_buf; int phyaddr; + u32 emio; + int init; struct phy_device *phydev; struct mii_dev *bus; }; @@ -196,6 +212,44 @@ static u32 phywrite(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 data) ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data); } +static void phy_detection(struct eth_device *dev) +{ + int i; + u16 phyreg; + struct zynq_gem_priv *priv = dev->priv; + + if (priv->phyaddr != -1) { + phyread(dev, priv->phyaddr, PHY_DETECT_REG, &phyreg); + if ((phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + debug("Default phy address %d is valid\n", + priv->phyaddr); + return; + } else { + debug("PHY address is not setup correctly %d\n", + priv->phyaddr); + priv->phyaddr = -1; + } + } + + debug("detecting phy address\n"); + if (priv->phyaddr == -1) { + /* detect the PHY address */ + for (i = 31; i >= 0; i--) { + phyread(dev, i, PHY_DETECT_REG, &phyreg); + if ((phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + priv->phyaddr = i; + debug("Found valid phy address, %d\n", i); + return; + } + } + } + printf("PHY is not detected\n"); +} + static int zynq_gem_setup_mac(struct eth_device *dev) { u32 i, macaddrlow, macaddrhigh; @@ -226,7 +280,7 @@ static int zynq_gem_setup_mac(struct eth_device *dev) static int zynq_gem_init(struct eth_device *dev, bd_t * bis) { - u32 i; + u32 i, rclk, clk = 0; struct phy_device *phydev; const u32 stat_size = (sizeof(struct zynq_gem_regs) - offsetof(struct zynq_gem_regs, stat)) / 4; @@ -239,59 +293,92 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; - /* Disable all interrupts */ - writel(0xFFFFFFFF, ®s->idr); - - /* Disable the receiver & transmitter */ - writel(0, ®s->nwctrl); - writel(0, ®s->txsr); - writel(0, ®s->rxsr); - writel(0, ®s->phymntnc); - - /* Clear the Hash registers for the mac address pointed by AddressPtr */ - writel(0x0, ®s->hashl); - /* Write bits [63:32] in TOP */ - writel(0x0, ®s->hashh); + if (!priv->init) { + /* Disable all interrupts */ + writel(0xFFFFFFFF, ®s->idr); + + /* Disable the receiver & transmitter */ + writel(0, ®s->nwctrl); + writel(0, ®s->txsr); + writel(0, ®s->rxsr); + writel(0, ®s->phymntnc); + + /* Clear the Hash registers for the mac address + * pointed by AddressPtr + */ + writel(0x0, ®s->hashl); + /* Write bits [63:32] in TOP */ + writel(0x0, ®s->hashh); + + /* Clear all counters */ + for (i = 0; i <= stat_size; i++) + readl(®s->stat[i]); + + /* Setup RxBD space */ + memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd)); + /* Create the RxBD ring */ + memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers)); + + for (i = 0; i < RX_BUF; i++) { + priv->rx_bd[i].status = 0xF0000000; + priv->rx_bd[i].addr = + (u32)((char *)&(priv->rxbuffers) + + (i * PKTSIZE_ALIGN)); + } + /* WRAP bit to last BD */ + priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK; + /* Write RxBDs to IP */ + writel((u32)&(priv->rx_bd), ®s->rxqbase); - /* Clear all counters */ - for (i = 0; i <= stat_size; i++) - readl(®s->stat[i]); + /* Setup for DMA Configuration register */ + writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); - /* Setup RxBD space */ - memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd)); - /* Create the RxBD ring */ - memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers)); + /* Setup for Network Control register, MDIO, Rx and Tx enable */ + setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK); - for (i = 0; i < RX_BUF; i++) { - priv->rx_bd[i].status = 0xF0000000; - priv->rx_bd[i].addr = (u32)((char *) &(priv->rxbuffers) + - (i * PKTSIZE_ALIGN)); + priv->init++; } - /* WRAP bit to last BD */ - priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK; - /* Write RxBDs to IP */ - writel((u32) &(priv->rx_bd), ®s->rxqbase); - /* MAC Setup */ - /* Setup Network Configuration register */ - writel(ZYNQ_GEM_NWCFG_INIT, ®s->nwcfg); - - /* Setup for DMA Configuration register */ - writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); - - /* Setup for Network Control register, MDIO, Rx and Tx enable */ - setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK | - ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); + phy_detection(dev); /* interface - look at tsec */ phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0); - phydev->supported &= supported; + phydev->supported = supported | ADVERTISED_Pause | + ADVERTISED_Asym_Pause; phydev->advertising = phydev->supported; priv->phydev = phydev; phy_config(phydev); phy_startup(phydev); + switch (phydev->speed) { + case SPEED_1000: + writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000, + ®s->nwcfg); + rclk = (0 << 4) | (1 << 0); + clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + case SPEED_100: + clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000, + ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100); + rclk = 1 << 0; + clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + case SPEED_10: + rclk = 1 << 0; + /* FIXME untested */ + clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + } + + /* Change the rclk and clk only not using EMIO interface */ + if (!priv->emio) + zynq_slcr_gem_clk_setup(dev->iobase != + ZYNQ_GEM_BASEADDR0, rclk, clk); + + setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | + ZYNQ_GEM_NWCTRL_TXEN_MASK); + return 0; } @@ -307,11 +394,10 @@ static int zynq_gem_send(struct eth_device *dev, void *ptr, int len) writel((u32)&(priv->tx_bd), ®s->txqbase); /* Setup Tx BD */ - memset((void *) &(priv->tx_bd), 0, sizeof(struct emac_bd)); + memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd)); priv->tx_bd.addr = (u32)ptr; - priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK | - ZYNQ_GEM_TXBUF_WRAP_MASK; + priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK; /* Start transmit */ setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK); @@ -364,19 +450,17 @@ static int zynq_gem_recv(struct eth_device *dev) if ((++priv->rxbd_current) >= RX_BUF) priv->rxbd_current = 0; - - return frame_len; } - return 0; + return frame_len; } static void zynq_gem_halt(struct eth_device *dev) { struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; - /* Disable the receiver & transmitter */ - writel(0, ®s->nwctrl); + clrsetbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | + ZYNQ_GEM_NWCTRL_TXEN_MASK, 0); } static int zynq_gem_miiphyread(const char *devname, uchar addr, @@ -399,7 +483,7 @@ static int zynq_gem_miiphy_write(const char *devname, uchar addr, return phywrite(dev, addr, reg, val); } -int zynq_gem_initialize(bd_t *bis, int base_addr) +int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) { struct eth_device *dev; struct zynq_gem_priv *priv; @@ -415,11 +499,8 @@ int zynq_gem_initialize(bd_t *bis, int base_addr) } priv = dev->priv; -#ifdef CONFIG_PHY_ADDR - priv->phyaddr = CONFIG_PHY_ADDR; -#else - priv->phyaddr = -1; -#endif + priv->phyaddr = phy_addr; + priv->emio = emio; sprintf(dev->name, "Gem.%x", base_addr); |