diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/e1000.c | 34 | ||||
| -rw-r--r-- | drivers/net/e1000.h | 9 |
2 files changed, 38 insertions, 5 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 57aa53d..9a66e68 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -114,12 +114,13 @@ static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, static int32_t e1000_phy_hw_reset(struct e1000_hw *hw); static int e1000_phy_reset(struct e1000_hw *hw); static int e1000_detect_gig_phy(struct e1000_hw *hw); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static void e1000_set_media_type(struct e1000_hw *hw); static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +#ifndef CONFIG_E1000_NO_NVM +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); @@ -885,6 +886,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } +#endif /* CONFIG_E1000_NO_NVM */ /***************************************************************************** * Set PHY to class A mode @@ -897,6 +899,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw) static int32_t e1000_set_phy_mode(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM int32_t ret_val; uint16_t eeprom_data; @@ -923,10 +926,11 @@ e1000_set_phy_mode(struct e1000_hw *hw) hw->phy_reset_disable = false; } } - +#endif return E1000_SUCCESS; } +#ifndef CONFIG_E1000_NO_NVM /*************************************************************************** * * Obtaining software semaphore bit (SMBI) before resetting PHY. @@ -965,6 +969,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) return E1000_SUCCESS; } +#endif /*************************************************************************** * This function clears HW semaphore bits. @@ -977,6 +982,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM uint32_t swsm; DEBUGFUNC(); @@ -991,6 +997,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) } else swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); +#endif } /*************************************************************************** @@ -1007,6 +1014,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM int32_t timeout; uint32_t swsm; @@ -1043,7 +1051,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) "SWESMBI bit is set.\n"); return -E1000_ERR_EEPROM; } - +#endif return E1000_SUCCESS; } @@ -1097,6 +1105,7 @@ static bool e1000_is_second_port(struct e1000_hw *hw) } } +#ifndef CONFIG_E1000_NO_NVM /****************************************************************************** * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the * second function of dual function devices @@ -1136,6 +1145,7 @@ e1000_read_mac_addr(struct eth_device *nic) #endif return 0; } +#endif /****************************************************************************** * Initializes receive address filters. @@ -1764,9 +1774,11 @@ static int e1000_setup_link(struct eth_device *nic) { struct e1000_hw *hw = nic->priv; - uint32_t ctrl_ext; int32_t ret_val; +#ifndef CONFIG_E1000_NO_NVM + uint32_t ctrl_ext; uint16_t eeprom_data; +#endif DEBUGFUNC(); @@ -1775,6 +1787,7 @@ e1000_setup_link(struct eth_device *nic) if (e1000_check_phy_reset_block(hw)) return E1000_SUCCESS; +#ifndef CONFIG_E1000_NO_NVM /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -1788,7 +1801,7 @@ e1000_setup_link(struct eth_device *nic) DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } - +#endif if (hw->fc == e1000_fc_default) { switch (hw->mac_type) { case e1000_ich8lan: @@ -1797,6 +1810,7 @@ e1000_setup_link(struct eth_device *nic) hw->fc = e1000_fc_full; break; default: +#ifndef CONFIG_E1000_NO_NVM ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data); if (ret_val) { @@ -1809,6 +1823,7 @@ e1000_setup_link(struct eth_device *nic) EEPROM_WORD0F_ASM_DIR) hw->fc = e1000_fc_tx_pause; else +#endif hw->fc = e1000_fc_full; break; } @@ -1828,6 +1843,7 @@ e1000_setup_link(struct eth_device *nic) DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc); +#ifndef CONFIG_E1000_NO_NVM /* Take the 4 bits from EEPROM word 0x0F that determine the initial * polarity value for the SW controlled pins, and setup the * Extended Device Control reg with that info. @@ -1840,6 +1856,7 @@ e1000_setup_link(struct eth_device *nic) SWDPIO__EXT_SHIFT); E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); } +#endif /* Call the necessary subroutine to configure the link. */ ret_val = (hw->media_type == e1000_media_type_fiber) ? @@ -5196,6 +5213,7 @@ e1000_initialize(bd_t * bis) e1000_reset_hw(hw); list_add_tail(&hw->list_node, &e1000_hw_list); +#ifndef CONFIG_E1000_NO_NVM /* Validate the EEPROM and get chipset information */ #if !defined(CONFIG_MVBC_1G) if (e1000_init_eeprom_params(hw)) { @@ -5206,11 +5224,17 @@ e1000_initialize(bd_t * bis) continue; #endif e1000_read_mac_addr(nic); +#endif e1000_get_bus_type(hw); +#ifndef CONFIG_E1000_NO_NVM printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n ", nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2], nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]); +#else + memset(nic->enetaddr, 0, 6); + printf("e1000: no NVM\n"); +#endif /* Set up the function pointers and register the device */ nic->init = e1000_init; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 25884f5..ff87af2 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -63,11 +63,14 @@ struct e1000_hw_stats; /* Internal E1000 helper functions */ struct e1000_hw *e1000_find_card(unsigned int cardnum); + +#ifndef CONFIG_E1000_NO_NVM int32_t e1000_acquire_eeprom(struct e1000_hw *hw); void e1000_standby_eeprom(struct e1000_hw *hw); void e1000_release_eeprom(struct e1000_hw *hw); void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd); void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd); +#endif #ifdef CONFIG_E1000_SPI int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw, @@ -1019,6 +1022,7 @@ struct e1000_hw_stats { uint64_t tsctfc; }; +#ifndef CONFIG_E1000_NO_NVM struct e1000_eeprom_info { e1000_eeprom_type type; uint16_t word_size; @@ -1029,6 +1033,7 @@ e1000_eeprom_type type; bool use_eerd; bool use_eewr; }; +#endif typedef enum { e1000_smart_speed_default = 0, @@ -1081,10 +1086,14 @@ struct e1000_hw { uint32_t io_base; #endif uint32_t asf_firmware_present; +#ifndef CONFIG_E1000_NO_NVM uint32_t eeprom_semaphore_present; +#endif uint32_t swfw_sync_present; uint32_t swfwhw_semaphore_present; +#ifndef CONFIG_E1000_NO_NVM struct e1000_eeprom_info eeprom; +#endif e1000_ms_type master_slave; e1000_ms_type original_master_slave; e1000_ffe_config ffe_config_state; |