diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/phy/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/phy/generic_10g.c | 105 | ||||
| -rw-r--r-- | drivers/net/phy/phy.c | 724 |
3 files changed, 831 insertions, 0 deletions
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index bba8901..609a22f 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -27,6 +27,8 @@ LIB := $(obj)libphy.o COBJS-$(CONFIG_BITBANGMII) += miiphybb.o COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o +COBJS-$(CONFIG_PHYLIB) += phy.o +COBJS-$(CONFIG_PHYLIB_10G) += generic_10g.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c new file mode 100644 index 0000000..315c508 --- /dev/null +++ b/drivers/net/phy/generic_10g.c @@ -0,0 +1,105 @@ +/* + * Generic PHY Management code + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Copyright 2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + * Based loosely off of Linux's PHY Lib + */ + +#include <config.h> +#include <common.h> +#include <miiphy.h> +#include <phy.h> + +int gen10g_shutdown(struct phy_device *phydev) +{ + return 0; +} + +int gen10g_startup(struct phy_device *phydev) +{ + int devad, reg; + u32 mmd_mask = phydev->mmds; + + phydev->link = 1; + + /* For now just lie and say it's 10G all the time */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { + if (!mmd_mask & 1) + continue; + + /* Read twice because link state is latched and a + * read moves the current state into the register */ + phy_read(phydev, devad, MDIO_STAT1); + reg = phy_read(phydev, devad, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + } + + return 0; +} + +int gen10g_discover_mmds(struct phy_device *phydev) +{ + int mmd, stat2, devs1, devs2; + + /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY + * XS or DTE XS; give up if none is present. */ + for (mmd = 1; mmd <= 5; mmd++) { + /* Is this MMD present? */ + stat2 = phy_read(phydev, mmd, MDIO_STAT2); + if (stat2 < 0 || + (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) + continue; + + /* It should tell us about all the other MMDs */ + devs1 = phy_read(phydev, mmd, MDIO_DEVS1); + devs2 = phy_read(phydev, mmd, MDIO_DEVS2); + if (devs1 < 0 || devs2 < 0) + continue; + + phydev->mmds = devs1 | (devs2 << 16); + return 0; + } + + return 0; +} + +int gen10g_config(struct phy_device *phydev) +{ + /* For now, assume 10000baseT. Fill in later */ + phydev->supported = phydev->advertising = SUPPORTED_10000baseT_Full; + + return gen10g_discover_mmds(phydev); +} + +struct phy_driver gen10g_driver = { + .uid = 0xffffffff, + .mask = 0xffffffff, + .name = "Generic 10G PHY", + .features = 0, + .config = gen10g_config, + .startup = gen10g_startup, + .shutdown = gen10g_shutdown, +}; + diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c new file mode 100644 index 0000000..919011d --- /dev/null +++ b/drivers/net/phy/phy.c @@ -0,0 +1,724 @@ +/* + * Generic PHY Management code + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Copyright 2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + * Based loosely off of Linux's PHY Lib + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <net.h> +#include <command.h> +#include <miiphy.h> +#include <phy.h> +#include <errno.h> + +/* Generic PHY support and helper functions */ + +/** + * genphy_config_advert - sanitize and advertise auto-negotation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. + */ +int genphy_config_advert(struct phy_device *phydev) +{ + u32 advertise; + int oldadv, adv; + int err, changed = 0; + + /* Only allow advertising what + * this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup standard advertisement */ + oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + if (advertise & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; + + if (adv != oldadv) { + err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv); + + if (err < 0) + return err; + changed = 1; + } + + /* Configure gigabit if it's supported */ + if (phydev->supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) { + oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= ADVERTISE_1000HALF; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= ADVERTISE_1000FULL; + + if (adv != oldadv) { + err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, + adv); + + if (err < 0) + return err; + changed = 1; + } + } + + return changed; +} + + +/** + * genphy_setup_forced - configures/forces speed/duplex from @phydev + * @phydev: target phy_device struct + * + * Description: Configures MII_BMCR to force speed/duplex + * to the values in phydev. Assumes that the values are valid. + */ +int genphy_setup_forced(struct phy_device *phydev) +{ + int err; + int ctl = 0; + + phydev->pause = phydev->asym_pause = 0; + + if (SPEED_1000 == phydev->speed) + ctl |= BMCR_SPEED1000; + else if (SPEED_100 == phydev->speed) + ctl |= BMCR_SPEED100; + + if (DUPLEX_FULL == phydev->duplex) + ctl |= BMCR_FULLDPLX; + + err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); + + return err; +} + + +/** + * genphy_restart_aneg - Enable and Restart Autonegotiation + * @phydev: target phy_device struct + */ +int genphy_restart_aneg(struct phy_device *phydev) +{ + int ctl; + + ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + + if (ctl < 0) + return ctl; + + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + + /* Don't isolate the PHY if we're negotiating */ + ctl &= ~(BMCR_ISOLATE); + + ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); + + return ctl; +} + + +/** + * genphy_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. + */ +int genphy_config_aneg(struct phy_device *phydev) +{ + int result; + + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); + + result = genphy_config_advert(phydev); + + if (result < 0) /* error */ + return result; + + if (result == 0) { + /* Advertisment hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? */ + int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. */ + if (result > 0) + result = genphy_restart_aneg(phydev); + + return result; +} + +/** + * genphy_update_link - update link status in @phydev + * @phydev: target phy_device struct + * + * Description: Update the value in phydev->link to reflect the + * current link value. In order to do this, we need to read + * the status register twice, keeping the second value. + */ +int genphy_update_link(struct phy_device *phydev) +{ + unsigned int mii_reg; + + /* + * Wait if the link is up, and autonegotiation is in progress + * (ie - we're capable and it's not done) + */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + /* + * If we already saw the link up, and it hasn't gone down, then + * we don't need to wait for autoneg again + */ + if (phydev->link && mii_reg & BMSR_LSTATUS) + return 0; + + if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) { + int i = 0; + + printf("%s Waiting for PHY auto negotiation to complete", + phydev->dev->name); + while (!(mii_reg & BMSR_ANEGCOMPLETE)) { + /* + * Timeout reached ? + */ + if (i > PHY_ANEG_TIMEOUT) { + printf(" TIMEOUT !\n"); + phydev->link = 0; + return 0; + } + + if (ctrlc()) { + puts("user interrupt!\n"); + phydev->link = 0; + return -EINTR; + } + + if ((i++ % 500) == 0) + printf("."); + + udelay(1000); /* 1 ms */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + } + printf(" done\n"); + phydev->link = 1; + } else { + /* Read the link a second time to clear the latched state */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + if (mii_reg & BMSR_LSTATUS) + phydev->link = 1; + else + phydev->link = 0; + } + + return 0; +} + +/* + * Generic function which updates the speed and duplex. If + * autonegotiation is enabled, it uses the AND of the link + * partner's advertised capabilities and our advertised + * capabilities. If autonegotiation is disabled, we use the + * appropriate bits in the control register. + * + * Stolen from Linux's mii.c and phy_device.c + */ +static int genphy_parse_link(struct phy_device *phydev) +{ + int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + /* We're using autonegotiation */ + if (mii_reg & BMSR_ANEGCAPABLE) { + u32 lpa = 0; + u32 gblpa = 0; + + /* Check for gigabit capability */ + if (mii_reg & BMSR_ERCAP) { + /* We want a list of states supported by + * both PHYs in the link + */ + gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000); + gblpa &= phy_read(phydev, + MDIO_DEVAD_NONE, MII_CTRL1000) << 2; + } + + /* Set the baseline so we only have to set them + * if they're different + */ + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + + /* Check the gigabit fields */ + if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { + phydev->speed = SPEED_1000; + + if (gblpa & PHY_1000BTSR_1000FD) + phydev->duplex = DUPLEX_FULL; + + /* We're done! */ + return 0; + } + + lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); + lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA); + + if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + + } else if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + } else { + u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + } + + return 0; +} + +int genphy_config(struct phy_device *phydev) +{ + int val; + u32 features; + + /* For now, I'll claim that the generic driver supports + * all possible port types */ + features = (SUPPORTED_TP | SUPPORTED_MII + | SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC); + + /* Do we support autonegotiation? */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS); + + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + genphy_config_aneg(phydev); + + return 0; +} + +int genphy_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + genphy_parse_link(phydev); + + return 0; +} + +int genphy_shutdown(struct phy_device *phydev) +{ + return 0; +} + +static struct phy_driver genphy_driver = { + .uid = 0xffffffff, + .mask = 0xffffffff, + .name = "Generic PHY", + .features = 0, + .config = genphy_config, + .startup = genphy_startup, + .shutdown = genphy_shutdown, +}; + +static LIST_HEAD(phy_drivers); + +int phy_init(void) +{ + return 0; +} + +int phy_register(struct phy_driver *drv) +{ + INIT_LIST_HEAD(&drv->list); + list_add_tail(&drv->list, &phy_drivers); + + return 0; +} + +int phy_probe(struct phy_device *phydev) +{ + int err = 0; + + phydev->advertising = phydev->supported = phydev->drv->features; + phydev->mmds = phydev->drv->mmds; + + if (phydev->drv->probe) + err = phydev->drv->probe(phydev); + + return err; +} + +static struct phy_driver *generic_for_interface(phy_interface_t interface) +{ +#ifdef CONFIG_PHYLIB_10G + if (is_10g_interface(interface)) + return &gen10g_driver; +#endif + + return &genphy_driver; +} + +struct phy_driver *get_phy_driver(struct phy_device *phydev, + phy_interface_t interface) +{ + struct list_head *entry; + int phy_id = phydev->phy_id; + struct phy_driver *drv = NULL; + + list_for_each(entry, &phy_drivers) { + drv = list_entry(entry, struct phy_driver, list); + if ((drv->uid & drv->mask) == (phy_id & drv->mask)) + return drv; + } + + /* If we made it here, there's no driver for this PHY */ + return generic_for_interface(interface); +} + +struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id, + phy_interface_t interface) +{ + struct phy_device *dev; + + /* We allocate the device, and initialize the + * default values */ + dev = malloc(sizeof(*dev)); + if (!dev) { + printf("Failed to allocate PHY device for %s:%d\n", + bus->name, addr); + return NULL; + } + + memset(dev, 0, sizeof(*dev)); + + dev->duplex = -1; + dev->link = 1; + dev->interface = interface; + + dev->autoneg = AUTONEG_ENABLE; + + dev->addr = addr; + dev->phy_id = phy_id; + dev->bus = bus; + + dev->drv = get_phy_driver(dev, interface); + + phy_probe(dev); + + bus->phymap[addr] = dev; + + return dev; +} + +/** + * get_phy_id - reads the specified addr for its ID. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, stores it in @phy_id and returns zero on success. + */ +int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +{ + int phy_reg; + + /* Grab the bits from PHYIR1, and put them + * in the upper half */ + phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); + + if (phy_reg < 0) + return -EIO; + + *phy_id = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); + + if (phy_reg < 0) + return -EIO; + + *phy_id |= (phy_reg & 0xffff); + + return 0; +} + +/** + * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, then allocates and returns the phy_device to represent it. + */ +struct phy_device *get_phy_device(struct mii_dev *bus, int addr, + phy_interface_t interface) +{ + u32 phy_id = 0x1fffffff; + int i; + int r; + + /* If we have one, return the existing device, with new interface */ + if (bus->phymap[addr]) { + bus->phymap[addr]->interface = interface; + + return bus->phymap[addr]; + } + + /* Try Standard (ie Clause 22) access */ + r = get_phy_id(bus, addr, MDIO_DEVAD_NONE, &phy_id); + if (r) + return NULL; + + /* If the PHY ID is mostly f's, we didn't find anything */ + if ((phy_id & 0x1fffffff) != 0x1fffffff) + return phy_device_create(bus, addr, phy_id, interface); + + /* Otherwise we have to try Clause 45 */ + for (i = 1; i < 5; i++) { + r = get_phy_id(bus, addr, i, &phy_id); + if (r) + return NULL; + + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) != 0x1fffffff) + break; + } + + return phy_device_create(bus, addr, phy_id, interface); +} + +int phy_reset(struct phy_device *phydev) +{ + int reg; + int timeout = 500; + int devad = MDIO_DEVAD_NONE; + +#ifdef CONFIG_PHYLIB_10G + /* If it's 10G, we need to issue reset through one of the MMDs */ + if (is_10g_interface(phydev->interface)) { + if (!phydev->mmds) + gen10g_discover_mmds(phydev); + + devad = ffs(phydev->mmds) - 1; + } +#endif + + reg = phy_read(phydev, devad, MII_BMCR); + if (reg < 0) { + debug("PHY status read failed\n"); + return -1; + } + + reg |= BMCR_RESET; + + if (phy_write(phydev, devad, MII_BMCR, reg) < 0) { + debug("PHY reset failed\n"); + return -1; + } + +#ifdef CONFIG_PHY_RESET_DELAY + udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ +#endif + /* + * Poll the control register for the reset bit to go to 0 (it is + * auto-clearing). This should happen within 0.5 seconds per the + * IEEE spec. + */ + while ((reg & BMCR_RESET) && timeout--) { + reg = phy_read(phydev, devad, MII_BMCR); + + if (reg < 0) { + debug("PHY status read failed\n"); + return -1; + } + udelay(1000); + } + + if (reg & BMCR_RESET) { + puts("PHY reset timed out\n"); + return -1; + } + + return 0; +} + +int miiphy_reset(const char *devname, unsigned char addr) +{ + struct mii_dev *bus = miiphy_get_dev_by_name(devname); + struct phy_device *phydev; + + /* + * miiphy_reset was only used on standard PHYs, so we'll fake it here. + * If later code tries to connect with the right interface, this will + * be corrected by get_phy_device in phy_connect() + */ + phydev = get_phy_device(bus, addr, PHY_INTERFACE_MODE_MII); + + return phy_reset(phydev); +} + +struct phy_device *phy_connect(struct mii_dev *bus, int addr, + struct eth_device *dev, + phy_interface_t interface) +{ + struct phy_device *phydev; + + /* Reset the bus */ + bus->reset(bus); + + /* Wait 15ms to make sure the PHY has come out of hard reset */ + udelay(15000); + + phydev = get_phy_device(bus, addr, interface); + + if (!phydev) { + printf("Could not get PHY for %s:%d\n", bus->name, addr); + + return NULL; + } + + /* Soft Reset the PHY */ + phy_reset(phydev); + + if (phydev->dev) + printf("%s:%d is connected to %s. Reconnecting to %s\n", + bus->name, addr, phydev->dev->name, dev->name); + + phydev->dev = dev; + + printf("%s connected to %s\n", dev->name, phydev->drv->name); + + return phydev; +} + +int phy_startup(struct phy_device *phydev) +{ + if (phydev->drv->startup) + phydev->drv->startup(phydev); + + return 0; +} + +static int __board_phy_config(struct phy_device *phydev) +{ + return 0; +} + +int board_phy_config(struct phy_device *phydev) + __attribute__((weak, alias("__board_phy_config"))); + +int phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + /* Invoke an optional board-specific helper */ + board_phy_config(phydev); + + return 0; +} + +int phy_shutdown(struct phy_device *phydev) +{ + if (phydev->drv->shutdown) + phydev->drv->shutdown(phydev); + + return 0; +} |