diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/smc911x.c | 466 | ||||
| -rw-r--r-- | drivers/net/smc911x.h | 9 |
2 files changed, 17 insertions, 458 deletions
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 6cea1ba..c50758e 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -3,8 +3,6 @@ * * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> * - * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. - * * See file CREDITS for list of people who contributed to this * project. * @@ -36,436 +34,14 @@ u32 pkt_data_pull(struct eth_device *dev, u32 addr) \ __attribute__ ((weak, alias ("smc911x_reg_read"))); void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \ __attribute__ ((weak, alias ("smc911x_reg_write"))); -#ifndef CONFIG_DRIVER_SMC911X_BASE -#ifdef CONFIG_DRIVER_SMC911X_BASE_VARIABLE -extern u32 CONFIG_DRIVER_SMC911X_BASE_VARIABLE; -#define CONFIG_DRIVER_SMC911X_BASE CONFIG_DRIVER_SMC911X_BASE_VARIABLE -#else -#error "Please define base constant or variable!" -#endif -#endif - -#if defined (CONFIG_DRIVER_SMC911X_32_BIT) -static inline u32 smc911x_reg_read(u32 addr) -{ - return *(volatile u32*)addr; -} -static inline void smc911x_reg_write(u32 addr, u32 val) -{ - *(volatile u32*)addr = val; -} -#elif defined (CONFIG_DRIVER_SMC911X_16_BIT) -static inline u32 smc911x_reg_read(u32 addr) -{ - volatile u16 *addr_16 = (u16 *)addr; - return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16)); -} - -static inline void smc911x_reg_write(u32 addr, u32 val) -{ - *(volatile u16*)addr = (u16)val; - *(volatile u16*)(addr + 2) = (u16)(val >> 16); -} -#else -#error "SMC911X: undefined bus width" -#endif /* CONFIG_DRIVER_SMC911X_16_BIT */ #define mdelay(n) udelay((n)*1000) static void smx911x_handle_mac_address(struct eth_device *dev) -/* Below are the register offsets and bit definitions - * of the Lan911x memory space - */ -#define RX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x00) - -#define TX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x20) -#define TX_CMD_A_INT_ON_COMP 0x80000000 -#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000 -#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000 -#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000 -#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000 -#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000 -#define TX_CMD_A_INT_FIRST_SEG 0x00002000 -#define TX_CMD_A_INT_LAST_SEG 0x00001000 -#define TX_CMD_A_BUF_SIZE 0x000007FF -#define TX_CMD_B_PKT_TAG 0xFFFF0000 -#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000 -#define TX_CMD_B_DISABLE_PADDING 0x00001000 -#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF - -#define RX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x40) -#define RX_STS_PKT_LEN 0x3FFF0000 -#define RX_STS_ES 0x00008000 -#define RX_STS_BCST 0x00002000 -#define RX_STS_LEN_ERR 0x00001000 -#define RX_STS_RUNT_ERR 0x00000800 -#define RX_STS_MCAST 0x00000400 -#define RX_STS_TOO_LONG 0x00000080 -#define RX_STS_COLL 0x00000040 -#define RX_STS_ETH_TYPE 0x00000020 -#define RX_STS_WDOG_TMT 0x00000010 -#define RX_STS_MII_ERR 0x00000008 -#define RX_STS_DRIBBLING 0x00000004 -#define RX_STS_CRC_ERR 0x00000002 -#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44) -#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48) -#define TX_STS_TAG 0xFFFF0000 -#define TX_STS_ES 0x00008000 -#define TX_STS_LOC 0x00000800 -#define TX_STS_NO_CARR 0x00000400 -#define TX_STS_LATE_COLL 0x00000200 -#define TX_STS_MANY_COLL 0x00000100 -#define TX_STS_COLL_CNT 0x00000078 -#define TX_STS_MANY_DEFER 0x00000004 -#define TX_STS_UNDERRUN 0x00000002 -#define TX_STS_DEFERRED 0x00000001 -#define TX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x4C) -#define ID_REV (CONFIG_DRIVER_SMC911X_BASE + 0x50) -#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */ -#define ID_REV_REV_ID 0x0000FFFF /* RO */ - -#define INT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x54) -#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */ -#define INT_CFG_INT_DEAS_CLR 0x00004000 -#define INT_CFG_INT_DEAS_STS 0x00002000 -#define INT_CFG_IRQ_INT 0x00001000 /* RO */ -#define INT_CFG_IRQ_EN 0x00000100 /* R/W */ -#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */ -#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */ - -#define INT_STS (CONFIG_DRIVER_SMC911X_BASE + 0x58) -#define INT_STS_SW_INT 0x80000000 /* R/WC */ -#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */ -#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */ -#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */ -#define INT_STS_RXDF_INT 0x00400000 /* R/WC */ -#define INT_STS_TX_IOC 0x00200000 /* R/WC */ -#define INT_STS_RXD_INT 0x00100000 /* R/WC */ -#define INT_STS_GPT_INT 0x00080000 /* R/WC */ -#define INT_STS_PHY_INT 0x00040000 /* RO */ -#define INT_STS_PME_INT 0x00020000 /* R/WC */ -#define INT_STS_TXSO 0x00010000 /* R/WC */ -#define INT_STS_RWT 0x00008000 /* R/WC */ -#define INT_STS_RXE 0x00004000 /* R/WC */ -#define INT_STS_TXE 0x00002000 /* R/WC */ -/*#define INT_STS_ERX 0x00001000*/ /* R/WC */ -#define INT_STS_TDFU 0x00000800 /* R/WC */ -#define INT_STS_TDFO 0x00000400 /* R/WC */ -#define INT_STS_TDFA 0x00000200 /* R/WC */ -#define INT_STS_TSFF 0x00000100 /* R/WC */ -#define INT_STS_TSFL 0x00000080 /* R/WC */ -/*#define INT_STS_RXDF 0x00000040*/ /* R/WC */ -#define INT_STS_RDFO 0x00000040 /* R/WC */ -#define INT_STS_RDFL 0x00000020 /* R/WC */ -#define INT_STS_RSFF 0x00000010 /* R/WC */ -#define INT_STS_RSFL 0x00000008 /* R/WC */ -#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */ -#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */ -#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */ -#define INT_EN (CONFIG_DRIVER_SMC911X_BASE + 0x5C) -#define INT_EN_SW_INT_EN 0x80000000 /* R/W */ -#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */ -#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */ -#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */ -/*#define INT_EN_RXDF_INT_EN 0x00400000*/ /* R/W */ -#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */ -#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */ -#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */ -#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */ -#define INT_EN_PME_INT_EN 0x00020000 /* R/W */ -#define INT_EN_TXSO_EN 0x00010000 /* R/W */ -#define INT_EN_RWT_EN 0x00008000 /* R/W */ -#define INT_EN_RXE_EN 0x00004000 /* R/W */ -#define INT_EN_TXE_EN 0x00002000 /* R/W */ -/*#define INT_EN_ERX_EN 0x00001000*/ /* R/W */ -#define INT_EN_TDFU_EN 0x00000800 /* R/W */ -#define INT_EN_TDFO_EN 0x00000400 /* R/W */ -#define INT_EN_TDFA_EN 0x00000200 /* R/W */ -#define INT_EN_TSFF_EN 0x00000100 /* R/W */ -#define INT_EN_TSFL_EN 0x00000080 /* R/W */ -/*#define INT_EN_RXDF_EN 0x00000040*/ /* R/W */ -#define INT_EN_RDFO_EN 0x00000040 /* R/W */ -#define INT_EN_RDFL_EN 0x00000020 /* R/W */ -#define INT_EN_RSFF_EN 0x00000010 /* R/W */ -#define INT_EN_RSFL_EN 0x00000008 /* R/W */ -#define INT_EN_GPIO2_INT 0x00000004 /* R/W */ -#define INT_EN_GPIO1_INT 0x00000002 /* R/W */ -#define INT_EN_GPIO0_INT 0x00000001 /* R/W */ - -#define BYTE_TEST (CONFIG_DRIVER_SMC911X_BASE + 0x64) -#define FIFO_INT (CONFIG_DRIVER_SMC911X_BASE + 0x68) -#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */ -#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */ -#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */ -#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */ - -#define RX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x6C) -#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */ -#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */ -#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */ -#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */ -#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */ -#define RX_CFG_RX_DUMP 0x00008000 /* R/W */ -#define RX_CFG_RXDOFF 0x00001F00 /* R/W */ -/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */ - -#define TX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x70) -/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */ -/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/ /* R/W Self Clearing */ -#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */ -#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */ -#define TX_CFG_TXSAO 0x00000004 /* R/W */ -#define TX_CFG_TX_ON 0x00000002 /* R/W */ -#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */ - -#define HW_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x74) -#define HW_CFG_TTM 0x00200000 /* R/W */ -#define HW_CFG_SF 0x00100000 /* R/W */ -#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */ -#define HW_CFG_TR 0x00003000 /* R/W */ -#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */ -#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */ -#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */ -#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */ -#define HW_CFG_SMI_SEL 0x00000010 /* R/W */ -#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */ -#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */ -#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */ -#define HW_CFG_SRST_TO 0x00000002 /* RO */ -#define HW_CFG_SRST 0x00000001 /* Self Clearing */ - -#define RX_DP_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x78) -#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */ -#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */ - -#define RX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x7C) -#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */ -#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */ - -#define TX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x80) -#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */ -#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */ - -#define PMT_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x84) -#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */ -#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */ -#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */ -#define PMT_CTRL_ED_EN 0x00000100 /* R/W */ -#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */ -#define PMT_CTRL_WUPS 0x00000030 /* R/WC */ -#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */ -#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */ -#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */ -#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */ -#define PMT_CTRL_PME_IND 0x00000008 /* R/W */ -#define PMT_CTRL_PME_POL 0x00000004 /* R/W */ -#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */ -#define PMT_CTRL_READY 0x00000001 /* RO */ - -#define GPIO_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x88) -#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */ -#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */ -#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */ -#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */ -#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */ -#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */ -#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */ -#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */ -#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */ -#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */ -#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */ -#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */ -#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */ -#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */ -#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */ -#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */ -#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */ -#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */ - -#define GPT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x8C) -#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */ -#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */ - -#define GPT_CNT (CONFIG_DRIVER_SMC911X_BASE + 0x90) -#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */ - -#define ENDIAN (CONFIG_DRIVER_SMC911X_BASE + 0x98) -#define FREE_RUN (CONFIG_DRIVER_SMC911X_BASE + 0x9C) -#define RX_DROP (CONFIG_DRIVER_SMC911X_BASE + 0xA0) -#define MAC_CSR_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xA4) -#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */ -#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */ -#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */ - -#define MAC_CSR_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xA8) -#define AFC_CFG (CONFIG_DRIVER_SMC911X_BASE + 0xAC) -#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */ -#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */ -#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */ -#define AFC_CFG_FCMULT 0x00000008 /* R/W */ -#define AFC_CFG_FCBRD 0x00000004 /* R/W */ -#define AFC_CFG_FCADD 0x00000002 /* R/W */ -#define AFC_CFG_FCANY 0x00000001 /* R/W */ - -#define E2P_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xB0) -#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */ -#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */ -#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */ -#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */ -#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */ -#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */ -#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */ -#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */ -#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */ -#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */ -#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */ -#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */ -#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */ - -#define E2P_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xB4) -#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */ -/* end of LAN register offsets and bit definitions */ - -/* MAC Control and Status registers */ -#define MAC_CR 0x01 /* R/W */ - -/* MAC_CR - MAC Control Register */ -#define MAC_CR_RXALL 0x80000000 -/* TODO: delete this bit? It is not described in the data sheet. */ -#define MAC_CR_HBDIS 0x10000000 -#define MAC_CR_RCVOWN 0x00800000 -#define MAC_CR_LOOPBK 0x00200000 -#define MAC_CR_FDPX 0x00100000 -#define MAC_CR_MCPAS 0x00080000 -#define MAC_CR_PRMS 0x00040000 -#define MAC_CR_INVFILT 0x00020000 -#define MAC_CR_PASSBAD 0x00010000 -#define MAC_CR_HFILT 0x00008000 -#define MAC_CR_HPFILT 0x00002000 -#define MAC_CR_LCOLL 0x00001000 -#define MAC_CR_BCAST 0x00000800 -#define MAC_CR_DISRTY 0x00000400 -#define MAC_CR_PADSTR 0x00000100 -#define MAC_CR_BOLMT_MASK 0x000000C0 -#define MAC_CR_DFCHK 0x00000020 -#define MAC_CR_TXEN 0x00000008 -#define MAC_CR_RXEN 0x00000004 - -#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */ -#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */ -#define HASHH 0x04 /* R/W */ -#define HASHL 0x05 /* R/W */ - -#define MII_ACC 0x06 /* R/W */ -#define MII_ACC_PHY_ADDR 0x0000F800 -#define MII_ACC_MIIRINDA 0x000007C0 -#define MII_ACC_MII_WRITE 0x00000002 -#define MII_ACC_MII_BUSY 0x00000001 - -#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */ - -#define FLOW 0x08 /* R/W */ -#define FLOW_FCPT 0xFFFF0000 -#define FLOW_FCPASS 0x00000004 -#define FLOW_FCEN 0x00000002 -#define FLOW_FCBSY 0x00000001 - -#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */ -#define VLAN1_VTI1 0x0000ffff - -#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */ -#define VLAN2_VTI2 0x0000ffff - -#define WUFF 0x0B /* WO */ - -#define WUCSR 0x0C /* R/W */ -#define WUCSR_GUE 0x00000200 -#define WUCSR_WUFR 0x00000040 -#define WUCSR_MPR 0x00000020 -#define WUCSR_WAKE_EN 0x00000004 -#define WUCSR_MPEN 0x00000002 - -/* Chip ID values */ -#define CHIP_9115 0x115 -#define CHIP_9116 0x116 -#define CHIP_9117 0x117 -#define CHIP_9118 0x118 -#define CHIP_9215 0x115a -#define CHIP_9216 0x116a -#define CHIP_9217 0x117a -#define CHIP_9218 0x118a - -struct chip_id { - u16 id; - char *name; -}; - -static const struct chip_id chip_ids[] = { - { CHIP_9115, "LAN9115" }, - { CHIP_9116, "LAN9116" }, - { CHIP_9117, "LAN9117" }, - { CHIP_9118, "LAN9118" }, - { CHIP_9215, "LAN9215" }, - { CHIP_9216, "LAN9216" }, - { CHIP_9217, "LAN9217" }, - { CHIP_9218, "LAN9218" }, - { 0, NULL }, -}; - -#define DRIVERNAME "smc911x" - -u32 smc911x_get_mac_csr(u8 reg) -{ - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) - ; - reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg); - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) - ; - - return reg_read(MAC_CSR_DATA); -} - -void smc911x_set_mac_csr(u8 reg, u32 data) -{ - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) - ; - reg_write(MAC_CSR_DATA, data); - reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg); - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) - ; -} - -static int smx911x_handle_mac_address(struct eth_device *dev) { unsigned long addrh, addrl; uchar *m = dev->enetaddr; - /* if the environment has a valid mac address then use it */ - if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) { - addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24; - addrh = m[4] | m[5] << 8; - smc911x_set_mac_csr(ADDRH, addrh); - smc911x_set_mac_csr(ADDRL, addrl); - } else { - /* if not, try to get one from the eeprom */ - addrh = smc911x_get_mac_csr(ADDRH); - addrl = smc911x_get_mac_csr(ADDRL); - - m[0] = (addrl ) & 0xff; - m[1] = (addrl >> 8 ) & 0xff; - m[2] = (addrl >> 16 ) & 0xff; - m[3] = (addrl >> 24 ) & 0xff; - m[4] = (addrh ) & 0xff; - m[5] = (addrh >> 8 ) & 0xff; - - /* we get 0xff when there is no eeprom connected */ - if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) { - printf(DRIVERNAME ": no valid mac address in environment " - "and no eeprom found\n"); - return -1; - } - } - addrl = m[0] | (m[1] << 8) | (m[2] << 16) | (m[3] << 24); addrh = m[4] | (m[5] << 8); smc911x_set_mac_csr(dev, ADDRL, addrl); @@ -568,44 +144,27 @@ static void smc911x_enable(struct eth_device *dev) } -#ifndef CONFIG_NET_MULTI -int eth_init(bd_t *bd) -#else -static int smc911x_init(struct eth_device *dev, bd_t *bd) -#endif +static int smc911x_init(struct eth_device *dev, bd_t * bd) { - printf(DRIVERNAME ": initializing\n"); + struct chip_id *id = dev->priv; - if (smc911x_detect_chip(dev)) - goto err_out; + printf(DRIVERNAME ": detected %s controller\n", id->name); smc911x_reset(dev); /* Configure the PHY, initialize the link state */ smc911x_phy_configure(dev); -#ifndef CONFIG_NET_MULTI - if (smx911x_handle_mac_address(bd->bi_enetaddr)) -#else - if (smx911x_handle_mac_address(dev)) -#endif - goto err_out; + smx911x_handle_mac_address(dev); /* Turn on Tx + Rx */ smc911x_enable(dev); return 0; - -err_out: - return -1; } -#ifndef CONFIG_NET_MULTI -int eth_send(volatile void *packet, int length) -#else static int smc911x_send(struct eth_device *dev, volatile void *packet, int length) -#endif { u32 *data = (u32*)packet; u32 tmplen; @@ -644,20 +203,12 @@ static int smc911x_send(struct eth_device *dev, return -1; } -#ifndef CONFIG_NET_MULTI -void eth_halt(void) -#else static void smc911x_halt(struct eth_device *dev) -#endif { smc911x_reset(dev); } -#ifndef CONFIG_NET_MULTI -int eth_rx(void) -#else static int smc911x_rx(struct eth_device *dev) -#endif { u32 *data = (u32 *)NetRxPackets[0]; u32 pktlen, tmplen; @@ -684,7 +235,6 @@ static int smc911x_rx(struct eth_device *dev) return 0; } -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) int smc911x_initialize(u8 dev_num, int base_addr) { unsigned long addrl, addrh; @@ -696,10 +246,15 @@ int smc911x_initialize(u8 dev_num, int base_addr) return 0; } memset(dev, 0, sizeof(*dev)); - strcpy(dev->name, DRIVERNAME); dev->iobase = base_addr; + /* Try to detect chip. Will fail if not present. */ + if (smc911x_detect_chip(dev)) { + free(dev); + return 0; + } + addrh = smc911x_get_mac_csr(dev, ADDRH); addrl = smc911x_get_mac_csr(dev, ADDRL); dev->enetaddr[0] = addrl; @@ -718,4 +273,3 @@ int smc911x_initialize(u8 dev_num, int base_addr) eth_register(dev); return 0; } -#endif diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index 053e330..05e007c 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -393,6 +393,7 @@ static inline void smc911x_reg_write(struct eth_device *dev, #define CHIP_9216 0x116a #define CHIP_9217 0x117a #define CHIP_9218 0x118a +#define CHIP_9220 0x9220 #define CHIP_9221 0x9221 struct chip_id { @@ -410,6 +411,7 @@ static const struct chip_id chip_ids[] = { { CHIP_9216, "LAN9216" }, { CHIP_9217, "LAN9217" }, { CHIP_9218, "LAN9218" }, + { CHIP_9220, "LAN9220" }, { CHIP_9221, "LAN9221" }, { 0, NULL }, }; @@ -441,7 +443,10 @@ static int smc911x_detect_chip(struct eth_device *dev) unsigned long val, i; val = smc911x_reg_read(dev, BYTE_TEST); - if (val != 0x87654321) { + if (val == 0xffffffff) { + /* Special case -- no chip present */ + return -1; + } else if (val != 0x87654321) { printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val); return -1; } @@ -455,7 +460,7 @@ static int smc911x_detect_chip(struct eth_device *dev) return -1; } - printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name); + dev->priv = (void *)&chip_ids[i]; return 0; } |