diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/xilinx_emac.c | 374 | ||||
| -rw-r--r-- | drivers/net/xilinx_emac.h | 148 | ||||
| -rw-r--r-- | drivers/net/xilinx_emaclite.c | 376 |
4 files changed, 899 insertions, 2 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 37d69b9..0639859 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -24,8 +24,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libnet.a - -COBJS := mcffec.o +COBJS := mcffec.o xilinx_emac.o xilinx_emaclite.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/net/xilinx_emac.c b/drivers/net/xilinx_emac.c new file mode 100644 index 0000000..36e627a --- /dev/null +++ b/drivers/net/xilinx_emac.c @@ -0,0 +1,374 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based on Xilinx drivers + * + */ + +#include <config.h> +#include <common.h> +#include <net.h> +#include <asm/io.h> +#include "xilinx_emac.h" + +#ifdef XILINX_EMAC + +#undef DEBUG + +#define ENET_MAX_MTU PKTSIZE +#define ENET_ADDR_LENGTH 6 + +static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */ + +static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; + +static xemac emac; + +void eth_halt(void) +{ +#ifdef DEBUG + puts ("eth_halt\n"); +#endif +} + +int eth_init(bd_t * bis) +{ + u32 helpreg; +#ifdef DEBUG + printf("EMAC Initialization Started\n\r"); +#endif + if (emac.isstarted) { + puts("Emac is started\n"); + return 0; + } + + memset (&emac, 0, sizeof (xemac)); + + emac.baseaddress = XILINX_EMAC_BASEADDR; + + /* Setting up FIFOs */ + emac.recvfifo.regbaseaddress = emac.baseaddress + + XEM_PFIFO_RXREG_OFFSET; + emac.recvfifo.databaseaddress = emac.baseaddress + + XEM_PFIFO_RXDATA_OFFSET; + out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK); + + emac.sendfifo.regbaseaddress = emac.baseaddress + + XEM_PFIFO_TXREG_OFFSET; + emac.sendfifo.databaseaddress = emac.baseaddress + + XEM_PFIFO_TXDATA_OFFSET; + out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK); + + /* Reset the entire IPIF */ + out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET, + XIIF_V123B_RESET_MASK); + + /* Stopping EMAC for setting up MAC */ + helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET); + helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); + out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); + + if (!getenv("ethaddr")) { + memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH); + } + + /* Set the device station address high and low registers */ + helpreg = (bis->bi_enetaddr[0] << 8) | bis->bi_enetaddr[1]; + out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg); + helpreg = (bis->bi_enetaddr[2] << 24) | (bis->bi_enetaddr[3] << 16) | + (bis->bi_enetaddr[4] << 8) | bis->bi_enetaddr[5]; + out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg); + + + helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK | + XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK | + XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK; + out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); + + emac.isstarted = 1; + + /* Enable the transmitter, and receiver */ + helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET); + helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); + helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); + out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); + + printf("EMAC Initialization complete\n\r"); + return 0; +} + +int eth_send(volatile void *ptr, int len) +{ + u32 intrstatus; + u32 xmitstatus; + u32 fifocount; + u32 wordcount; + u32 extrabytecount; + u32 *wordbuffer = (u32 *) ptr; + + if (len > ENET_MAX_MTU) + len = ENET_MAX_MTU; + + /* + * Check for overruns and underruns for the transmit status and length + * FIFOs and make sure the send packet FIFO is not deadlocked. + * Any of these conditions is bad enough that we do not want to + * continue. The upper layer software should reset the device to resolve + * the error. + */ + intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); + if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | + XEM_EIR_XMIT_LFIFO_OVER_MASK)) { +#ifdef DEBUG + puts ("Transmitting overrun error\n"); +#endif + return 0; + } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | + XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { +#ifdef DEBUG + puts ("Transmitting underrun error\n"); +#endif + return 0; + } else if (in_be32 (emac.sendfifo.regbaseaddress + + XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) { +#ifdef DEBUG + puts("Transmitting fifo error\n"); +#endif + return 0; + } + + /* + * Before writing to the data FIFO, make sure the length FIFO is not + * full. The data FIFO might not be full yet even though the length FIFO + * is. This avoids an overrun condition on the length FIFO and keeps the + * FIFOs in sync. + * + * Clear the latched LFIFO_FULL bit so next time around the most + * current status is represented + */ + if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) { + out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, + intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK); +#ifdef DEBUG + puts ("Fifo is full\n"); +#endif + return 0; + } + + /* get the count of how many words may be inserted into the FIFO */ + fifocount = in_be32 (emac.sendfifo.regbaseaddress + + XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; + wordcount = len >> 2; + extrabytecount = len & 0x3; + + if (fifocount < wordcount) { +#ifdef DEBUG + puts ("Sending packet is larger then size of FIFO\n"); +#endif + return 0; + } + + for (fifocount = 0; fifocount < wordcount; fifocount++) { + out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]); + } + if (extrabytecount > 0) { + u32 lastword = 0; + u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount); + + if (extrabytecount == 1) { + lastword = extrabytesbuffer[0] << 24; + } else if (extrabytecount == 2) { + lastword = extrabytesbuffer[0] << 24 | + extrabytesbuffer[1] << 16; + } else if (extrabytecount == 3) { + lastword = extrabytesbuffer[0] << 24 | + extrabytesbuffer[1] << 16 | + extrabytesbuffer[2] << 8; + } + out_be32 (emac.sendfifo.databaseaddress, lastword); + } + + /* Loop on the MAC's status to wait for any pause to complete */ + intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); + while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) { + intrstatus = in_be32 ((emac.baseaddress) + + XIIF_V123B_IISR_OFFSET); + /* Clear the pause status from the transmit status register */ + out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, + intrstatus & XEM_EIR_XMIT_PAUSE_MASK); + } + + /* + * Set the MAC's transmit packet length register to tell it to transmit + */ + out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len); + + /* + * Loop on the MAC's status to wait for the transmit to complete. + * The transmit status is in the FIFO when the XMIT_DONE bit is set. + */ + do { + intrstatus = in_be32 ((emac.baseaddress) + + XIIF_V123B_IISR_OFFSET); + } + while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0); + + xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET); + + if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | + XEM_EIR_XMIT_LFIFO_OVER_MASK)) { +#ifdef DEBUG + puts ("Transmitting overrun error\n"); +#endif + return 0; + } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | + XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { +#ifdef DEBUG + puts ("Transmitting underrun error\n"); +#endif + return 0; + } + + /* Clear the interrupt status register of transmit statuses */ + out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, + intrstatus & XEM_EIR_XMIT_ALL_MASK); + + /* + * Collision errors are stored in the transmit status register + * instead of the interrupt status register + */ + if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) || + (xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) { +#ifdef DEBUG + puts ("Transmitting collision error\n"); +#endif + return 0; + } + return 1; +} + +int eth_rx(void) +{ + u32 pktlength; + u32 intrstatus; + u32 fifocount; + u32 wordcount; + u32 extrabytecount; + u32 lastword; + u8 *extrabytesbuffer; + + if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET) + & XPF_DEADLOCK_MASK) { + out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK); +#ifdef DEBUG + puts ("Receiving FIFO deadlock\n"); +#endif + return 0; + } + + /* + * Get the interrupt status to know what happened (whether an error + * occurred and/or whether frames have been received successfully). + * When clearing the intr status register, clear only statuses that + * pertain to receive. + */ + intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); + /* + * Before reading from the length FIFO, make sure the length FIFO is not + * empty. We could cause an underrun error if we try to read from an + * empty FIFO. + */ + if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) { +#ifdef DEBUG + /* puts("Receiving FIFO is empty\n"); */ +#endif + return 0; + } + + /* + * Determine, from the MAC, the length of the next packet available + * in the data FIFO (there should be a non-zero length here) + */ + pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET); + if (!pktlength) { + return 0; + } + + /* + * Write the RECV_DONE bit in the status register to clear it. This bit + * indicates the RPLR is non-empty, and we know it's set at this point. + * We clear it so that subsequent entry into this routine will reflect + * the current status. This is done because the non-empty bit is latched + * in the IPIF, which means it may indicate a non-empty condition even + * though there is something in the FIFO. + */ + out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, + XEM_EIR_RECV_DONE_MASK); + + fifocount = in_be32 (emac.recvfifo.regbaseaddress + + XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; + + if ((fifocount * 4) < pktlength) { +#ifdef DEBUG + puts ("Receiving FIFO is smaller than packet size.\n"); +#endif + return 0; + } + + wordcount = pktlength >> 2; + extrabytecount = pktlength & 0x3; + + for (fifocount = 0; fifocount < wordcount; fifocount++) { + etherrxbuff[fifocount] = + in_be32 (emac.recvfifo.databaseaddress); + } + + /* + * if there are extra bytes to handle, read the last word from the FIFO + * and insert the extra bytes into the buffer + */ + if (extrabytecount > 0) { + extrabytesbuffer = (u8 *) (etherrxbuff + wordcount); + + lastword = in_be32 (emac.recvfifo.databaseaddress); + + /* + * one extra byte in the last word, put the byte into the next + * location of the buffer, bytes in a word of the FIFO are + * ordered from most significant byte to least + */ + if (extrabytecount == 1) { + extrabytesbuffer[0] = (u8) (lastword >> 24); + } else if (extrabytecount == 2) { + extrabytesbuffer[0] = (u8) (lastword >> 24); + extrabytesbuffer[1] = (u8) (lastword >> 16); + } else if (extrabytecount == 3) { + extrabytesbuffer[0] = (u8) (lastword >> 24); + extrabytesbuffer[1] = (u8) (lastword >> 16); + extrabytesbuffer[2] = (u8) (lastword >> 8); + } + } + NetReceive((uchar *)etherrxbuff, pktlength); + return 1; +} +#endif diff --git a/drivers/net/xilinx_emac.h b/drivers/net/xilinx_emac.h new file mode 100644 index 0000000..966598e --- /dev/null +++ b/drivers/net/xilinx_emac.h @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based on Xilinx drivers + * + */ + +typedef struct { + u32 regbaseaddress; /* Base address of registers */ + u32 databaseaddress; /* Base address of data for FIFOs */ +} xpacketfifov100b; + +typedef struct { + u32 baseaddress; /* Base address (of IPIF) */ + u32 isstarted; /* Device is currently started 0-no, 1-yes */ + xpacketfifov100b recvfifo; /* FIFO used to receive frames */ + xpacketfifov100b sendfifo; /* FIFO used to send frames */ +} xemac; + +#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */ +#define XIIF_V123B_RESET_MASK 0xAUL +#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */ + +/* This constant is used with the Reset Register */ +#define XPF_RESET_FIFO_MASK 0x0000000A +#define XPF_COUNT_STATUS_REG_OFFSET 4UL + +/* These constants are used with the Occupancy/Vacancy Count Register. This + * register also contains FIFO status */ +#define XPF_COUNT_MASK 0x0000FFFF +#define XPF_DEADLOCK_MASK 0x20000000 + +/* Offset of the MAC registers from the IPIF base address */ +#define XEM_REG_OFFSET 0x1100UL + +/* + * Register offsets for the Ethernet MAC. Each register is 32 bits. + */ +#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */ +#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */ +#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */ +#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */ +#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */ +#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */ + + + +#define XEM_PFIFO_OFFSET 0x2000UL +/* Tx registers */ +#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0) +/* Rx registers */ +#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10) +/* Tx keyhole */ +#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100) +/* Rx keyhole */ +#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200) + + +/* + * EMAC Interrupt Registers (Status and Enable) masks. These registers are + * part of the IPIF IP Interrupt registers + */ +/* A mask for all transmit interrupts, used in polled mode */ +#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\ + XEM_EIR_XMIT_ERROR_MASK | \ + XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\ + XEM_EIR_XMIT_LFIFO_FULL_MASK) + +/* Xmit complete */ +#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL +/* Recv complete */ +#define XEM_EIR_RECV_DONE_MASK 0x00000002UL +/* Xmit error */ +#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL +/* Recv error */ +#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL +/* Xmit status fifo empty */ +#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL +/* Recv length fifo empty */ +#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL +/* Xmit length fifo full */ +#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL +/* Recv length fifo overrun */ +#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL +/* Recv length fifo underrun */ +#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL +/* Xmit status fifo overrun */ +#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL +/* Transmit status fifo underrun */ +#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL +/* Transmit length fifo overrun */ +#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL +/* Transmit length fifo underrun */ +#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL +/* Transmit pause pkt received */ +#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL + +/* + * EMAC Control Register (ECR) + */ +/* Full duplex mode */ +#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL +/* Reset transmitter */ +#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL +/* Enable transmitter */ +#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL +/* Reset receiver */ +#define XEM_ECR_RECV_RESET_MASK 0x10000000UL +/* Enable receiver */ +#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL +/* Enable PHY */ +#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL +/* Enable xmit pad insert */ +#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL +/* Enable xmit FCS insert */ +#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL +/* Enable unicast addr */ +#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL +/* Enable broadcast addr */ +#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL + +/* + * Transmit Status Register (TSR) + */ +/* Transmit excess deferral */ +#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL +/* Transmit late collision */ +#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c new file mode 100644 index 0000000..5d8eaa5 --- /dev/null +++ b/drivers/net/xilinx_emaclite.c @@ -0,0 +1,376 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <net.h> +#include <config.h> +#include <asm/io.h> + +#ifdef XILINX_EMACLITE_BASEADDR + +#undef DEBUG + +#define ENET_MAX_MTU PKTSIZE +#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN +#define ENET_ADDR_LENGTH 6 + +/* EmacLite constants */ +#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */ +#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ +#define XEL_TSR_OFFSET 0x07FC /* Tx status */ +#define XEL_RSR_OFFSET 0x17FC /* Rx status */ +#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ + +/* Xmit complete */ +#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL +/* Xmit interrupt enable bit */ +#define XEL_TSR_XMIT_IE_MASK 0x00000008UL +/* Buffer is active, SW bit only */ +#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL +/* Program the MAC address */ +#define XEL_TSR_PROGRAM_MASK 0x00000002UL +/* define for programming the MAC address into the EMAC Lite */ +#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) + +/* Transmit packet length upper byte */ +#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL +/* Transmit packet length lower byte */ +#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL + +/* Recv complete */ +#define XEL_RSR_RECV_DONE_MASK 0x00000001UL +/* Recv interrupt enable bit */ +#define XEL_RSR_RECV_IE_MASK 0x00000008UL + +typedef struct { + unsigned int baseaddress; /* Base address for device (IPIF) */ + unsigned int nexttxbuffertouse; /* Next TX buffer to write to */ + unsigned int nextrxbuffertouse; /* Next RX buffer to read from */ + unsigned char deviceid; /* Unique ID of device - for future */ +} xemaclite; + +static xemaclite emaclite; + +static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */ + +/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/ +#ifdef CFG_ENV_IS_NOWHERE +static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; +#endif + +void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount) +{ + unsigned int i; + u32 alignbuffer; + u32 *to32ptr; + u32 *from32ptr; + u8 *to8ptr; + u8 *from8ptr; + + from32ptr = (u32 *) srcptr; + + /* Word aligned buffer, no correction needed. */ + to32ptr = (u32 *) destptr; + while (bytecount > 3) { + *to32ptr++ = *from32ptr++; + bytecount -= 4; + } + to8ptr = (u8 *) to32ptr; + + alignbuffer = *from32ptr++; + from8ptr = (u8 *) & alignbuffer; + + for (i = 0; i < bytecount; i++) { + *to8ptr++ = *from8ptr++; + } +} + +void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount) +{ + unsigned i; + u32 alignbuffer; + u32 *to32ptr = (u32 *) destptr; + u32 *from32ptr; + u8 *to8ptr; + u8 *from8ptr; + + from32ptr = (u32 *) srcptr; + while (bytecount > 3) { + + *to32ptr++ = *from32ptr++; + bytecount -= 4; + } + + alignbuffer = 0; + to8ptr = (u8 *) & alignbuffer; + from8ptr = (u8 *) from32ptr; + + for (i = 0; i < bytecount; i++) { + *to8ptr++ = *from8ptr++; + } + + *to32ptr++ = alignbuffer; +} + +void eth_halt (void) +{ +#ifdef DEBUG + puts ("eth_halt\n"); +#endif +} + +int eth_init (bd_t * bis) +{ +#ifdef DEBUG + puts ("EmacLite Initialization Started\n"); +#endif + memset (&emaclite, 0, sizeof (xemaclite)); + emaclite.baseaddress = XILINX_EMACLITE_BASEADDR; + + if (!getenv("ethaddr")) { + memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH); + } + +/* + * TX - TX_PING & TX_PONG initialization + */ + /* Restart PING TX */ + out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0); + /* Copy MAC address */ + xemaclite_alignedwrite (bis->bi_enetaddr, + emaclite.baseaddress, ENET_ADDR_LENGTH); + /* Set the length */ + out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH); + /* Update the MAC address in the EMAC Lite */ + out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR); + /* Wait for EMAC Lite to finish with the MAC address update */ + while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) & + XEL_TSR_PROG_MAC_ADDR) != 0) ; + +#ifdef XILINX_EMACLITE_TX_PING_PONG + /* The same operation with PONG TX */ + out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0); + xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress + + XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH); + out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH); + out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, + XEL_TSR_PROG_MAC_ADDR); + while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + + XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ; +#endif + +/* + * RX - RX_PING & RX_PONG initialization + */ + /* Write out the value to flush the RX buffer */ + out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK); +#ifdef XILINX_EMACLITE_RX_PING_PONG + out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET, + XEL_RSR_RECV_IE_MASK); +#endif + +#ifdef DEBUG + puts ("EmacLite Initialization complete\n"); +#endif + return 0; +} + +int xemaclite_txbufferavailable (xemaclite * instanceptr) +{ + u32 reg; + u32 txpingbusy; + u32 txpongbusy; + /* + * Read the other buffer register + * and determine if the other buffer is available + */ + reg = in_be32 (instanceptr->baseaddress + + instanceptr->nexttxbuffertouse + 0); + txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) == + XEL_TSR_XMIT_BUSY_MASK); + + reg = in_be32 (instanceptr->baseaddress + + (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0); + txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) == + XEL_TSR_XMIT_BUSY_MASK); + + return (!(txpingbusy && txpongbusy)); +} + +int eth_send (volatile void *ptr, int len) { + + unsigned int reg; + unsigned int baseaddress; + + unsigned maxtry = 1000; + + if (len > ENET_MAX_MTU) + len = ENET_MAX_MTU; + + while (!xemaclite_txbufferavailable (&emaclite) && maxtry) { + udelay (10); + maxtry--; + } + + if (!maxtry) { + printf ("Error: Timeout waiting for ethernet TX buffer\n"); + /* Restart PING TX */ + out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0); +#ifdef XILINX_EMACLITE_TX_PING_PONG + out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + + XEL_BUFFER_OFFSET, 0); +#endif + return 0; + } + + /* Determine the expected TX buffer address */ + baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse); + + /* Determine if the expected buffer address is empty */ + reg = in_be32 (baseaddress + XEL_TSR_OFFSET); + if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) + && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET) + & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) { + +#ifdef XILINX_EMACLITE_TX_PING_PONG + emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET; +#endif +#ifdef DEBUG + printf ("Send packet from 0x%x\n", baseaddress); +#endif + /* Write the frame to the buffer */ + xemaclite_alignedwrite ((void *) ptr, baseaddress, len); + out_be32 (baseaddress + XEL_TPLR_OFFSET,(len & + (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO))); + reg = in_be32 (baseaddress + XEL_TSR_OFFSET); + reg |= XEL_TSR_XMIT_BUSY_MASK; + if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) { + reg |= XEL_TSR_XMIT_ACTIVE_MASK; + } + out_be32 (baseaddress + XEL_TSR_OFFSET, reg); + return 1; + } +#ifdef XILINX_EMACLITE_TX_PING_PONG + /* Switch to second buffer */ + baseaddress ^= XEL_BUFFER_OFFSET; + /* Determine if the expected buffer address is empty */ + reg = in_be32 (baseaddress + XEL_TSR_OFFSET); + if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) + && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET) + & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) { +#ifdef DEBUG + printf ("Send packet from 0x%x\n", baseaddress); +#endif + /* Write the frame to the buffer */ + xemaclite_alignedwrite ((void *) ptr, baseaddress, len); + out_be32 (baseaddress + XEL_TPLR_OFFSET,(len & + (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO))); + reg = in_be32 (baseaddress + XEL_TSR_OFFSET); + reg |= XEL_TSR_XMIT_BUSY_MASK; + if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) { + reg |= XEL_TSR_XMIT_ACTIVE_MASK; + } + out_be32 (baseaddress + XEL_TSR_OFFSET, reg); + return 1; + } +#endif + puts ("Error while sending frame\n"); + return 0; +} + +int eth_rx (void) +{ + unsigned int length; + unsigned int reg; + unsigned int baseaddress; + + baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse; + reg = in_be32 (baseaddress + XEL_RSR_OFFSET); +#ifdef DEBUG + printf ("Testing data at address 0x%x\n", baseaddress); +#endif + if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { +#ifdef XILINX_EMACLITE_RX_PING_PONG + emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET; +#endif + } else { +#ifndef XILINX_EMACLITE_RX_PING_PONG +#ifdef DEBUG + printf ("No data was available - address 0x%x\n", baseaddress); +#endif + return 0; +#else + baseaddress ^= XEL_BUFFER_OFFSET; + reg = in_be32 (baseaddress + XEL_RSR_OFFSET); + if ((reg & XEL_RSR_RECV_DONE_MASK) != + XEL_RSR_RECV_DONE_MASK) { +#ifdef DEBUG + printf ("No data was available - address 0x%x\n", + baseaddress); +#endif + return 0; + } +#endif + } + /* Get the length of the frame that arrived */ + switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) & + 0xFFFF0000 ) >> 16) { + case 0x806: + length = 42 + 20; /* FIXME size of ARP */ +#ifdef DEBUG + puts ("ARP Packet\n"); +#endif + break; + case 0x800: + length = 14 + 14 + + (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) & + 0xFFFF0000) >> 16); /* FIXME size of IP packet */ +#ifdef DEBUG + puts("IP Packet\n"); +#endif + break; + default: +#ifdef DEBUG + puts("Other Packet\n"); +#endif + length = ENET_MAX_MTU; + break; + } + + xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET), + etherrxbuff, length); + + /* Acknowledge the frame */ + reg = in_be32 (baseaddress + XEL_RSR_OFFSET); + reg &= ~XEL_RSR_RECV_DONE_MASK; + out_be32 (baseaddress + XEL_RSR_OFFSET, reg); + +#ifdef DEBUG + printf ("Packet receive from 0x%x, length %dB\n", baseaddress, length); +#endif + NetReceive ((uchar *) etherrxbuff, length); + return 1; + +} +#endif |