diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ax88180.c | 31 | ||||
| -rw-r--r-- | drivers/net/ax88180.h | 48 |
2 files changed, 18 insertions, 61 deletions
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c index 6e788a0..fa2e212 100644 --- a/drivers/net/ax88180.c +++ b/drivers/net/ax88180.c @@ -41,6 +41,7 @@ #include <command.h> #include <net.h> #include <malloc.h> +#include <linux/mii.h> #include "ax88180.h" /* @@ -112,10 +113,10 @@ static int ax88180_phy_reset (struct eth_device *dev) { unsigned short delay_cnt = 500; - ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN)); + ax88180_mdio_write (dev, MII_BMCR, (BMCR_RESET | BMCR_ANENABLE)); /* Wait for the reset to complete, or time out (500 ms) */ - while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) { + while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) { udelay (1000); if (--delay_cnt == 0) { printf ("Failed to reset PHY!\n"); @@ -265,10 +266,10 @@ static int ax88180_phy_initial (struct eth_device *dev) #endif { priv->PhyAddr = phyaddr; - priv->PhyID0 = ax88180_mdio_read(dev, PHYIDR0); + priv->PhyID0 = ax88180_mdio_read(dev, MII_PHYSID1); switch (priv->PhyID0) { - case MARVELL_88E1111_PHYIDR0: + case MARVELL_88E1111_PHYSID0: debug("ax88180: Found Marvell 88E1111 PHY." " (PHY Addr=0x%x)\n", priv->PhyAddr); @@ -282,7 +283,7 @@ static int ax88180_phy_initial (struct eth_device *dev) return 1; - case CICADA_CIS8201_PHYIDR0: + case CICADA_CIS8201_PHYSID0: debug("ax88180: Found CICADA CIS8201 PHY" " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr); @@ -321,20 +322,20 @@ static void ax88180_media_config (struct eth_device *dev) /* Waiting 2 seconds for PHY link stable */ for (i = 0; i < 20000; i++) { - bmsr_val = ax88180_mdio_read (dev, BMSR); - if (bmsr_val & LINKOK) { + bmsr_val = ax88180_mdio_read (dev, MII_BMSR); + if (bmsr_val & BMSR_LSTATUS) { break; } udelay (100); } - bmsr_val = ax88180_mdio_read (dev, BMSR); + bmsr_val = ax88180_mdio_read (dev, MII_BMSR); debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val); - if (bmsr_val & LINKOK) { - bmcr_val = ax88180_mdio_read (dev, BMCR); + if (bmsr_val & BMSR_LSTATUS) { + bmcr_val = ax88180_mdio_read (dev, MII_BMCR); - if (bmcr_val & AUTONEG_EN) { + if (bmcr_val & BMCR_ANENABLE) { /* * Waiting for Auto-negotiation completion, this may @@ -343,8 +344,8 @@ static void ax88180_media_config (struct eth_device *dev) debug ("ax88180: Auto-negotiation is " "enabled. Waiting for NWay completion..\n"); for (i = 0; i < 50000; i++) { - bmsr_val = ax88180_mdio_read (dev, BMSR); - if (bmsr_val & AUTONEG_COMPLETE) { + bmsr_val = ax88180_mdio_read (dev, MII_BMSR); + if (bmsr_val & BMSR_ANEGCOMPLETE) { break; } udelay (100); @@ -357,10 +358,10 @@ static void ax88180_media_config (struct eth_device *dev) /* Get real media mode here */ switch (priv->PhyID0) { - case MARVELL_88E1111_PHYIDR0: + case MARVELL_88E1111_PHYSID0: RealMediaMode = get_MarvellPHY_media_mode(dev); break; - case CICADA_CIS8201_PHYIDR0: + case CICADA_CIS8201_PHYSID0: RealMediaMode = get_CicadaPHY_media_mode(dev); break; default: diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h index 77bab5f..c793e92 100644 --- a/drivers/net/ax88180.h +++ b/drivers/net/ax88180.h @@ -63,9 +63,9 @@ struct ax88180_private { /* Max Rx Jumbo size is 15K Bytes */ #define MAX_RX_SIZE 0x3C00 -#define MARVELL_88E1111_PHYIDR0 0x0141 +#define MARVELL_88E1111_PHYSID0 0x0141 -#define CICADA_CIS8201_PHYIDR0 0x000F +#define CICADA_CIS8201_PHYSID0 0x000F #define MEDIA_AUTO 0 #define MEDIA_1000FULL 1 @@ -276,50 +276,6 @@ struct ax88180_private { #define SOFTRST_NORMAL 0x00000003 #define SOFTRST_RESET_MAC 0x00000002 -/* External PHY Register Definition */ -#define BMCR 0x0000 - #define LINE_SPEED_MSB 0x0040 - #define DUPLEX_MODE 0x0100 - #define RESTART_AUTONEG 0x0200 - #define POWER_DOWN 0x0800 - #define AUTONEG_EN 0x1000 - #define LINE_SPEED_LSB 0x2000 - #define PHY_RESET 0x8000 - - #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\ - DUPLEX_MODE) - #define BMCR_SPEED_1000 LINE_SPEED_MSB - #define BMCR_SPEED_100 LINE_SPEED_LSB - #define BMCR_SPEED_10 0x0000 - - #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE) - #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE) - #define BMCR_100HALF BMCR_SPEED_100 - #define BMCR_10FULL DUPLEX_MODE - #define BMCR_10HALF 0x0000 -#define BMSR 0x0001 - #define LINKOK 0x0004 - #define AUTONEG_ENABLE_STS 0x0008 - #define AUTONEG_COMPLETE 0x0020 -#define PHYIDR0 0x0002 -#define PHYIDR1 0x0003 -#define ANAR 0x0004 - #define ANAR_PAUSE 0x0400 - #define ANAR_100FULL 0x0100 - #define ANAR_100HALF 0x0080 - #define ANAR_10FULL 0x0040 - #define ANAR_10HALF 0x0020 - #define ANAR_8023BIT 0x0001 -#define ANLPAR 0x0005 -#define ANER 0x0006 -#define AUX_1000_CTRL 0x0009 - #define ENABLE_1000HALF 0x0100 - #define ENABLE_1000FULL 0x0200 - #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL) -#define AUX_1000_STATUS 0x000A - #define LP_1000HALF 0x0400 - #define LP_1000FULL 0x0800 - /* Marvell 88E1111 Gigabit PHY Register Definition */ #define M88_SSR 0x0011 #define SSR_SPEED_MASK 0xC000 |