summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/at91_emac.c20
-rw-r--r--drivers/net/davinci_emac.c80
-rw-r--r--drivers/net/enc28j60.c1564
-rw-r--r--drivers/net/enc28j60.h251
-rw-r--r--drivers/net/enc28j60_lpc2292.c983
-rw-r--r--drivers/net/mpc5xxx_fec.c7
-rw-r--r--drivers/net/smc91111.c40
-rw-r--r--drivers/net/xilinx_emaclite.c88
9 files changed, 2144 insertions, 890 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 218eeff..79eb66b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -40,6 +40,7 @@ COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
COBJS-$(CONFIG_EEPRO100) += eepro100.o
COBJS-$(CONFIG_ENC28J60) += enc28j60.o
+COBJS-$(CONFIG_ENC28J60_LPC2292) += enc28j60_lpc2292.o
COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
COBJS-$(CONFIG_ETHOC) += ethoc.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index d82459b..c525eed 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -208,7 +208,7 @@ static int at91emac_phy_reset(struct eth_device *netdev)
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
(BMCR_ANENABLE | BMCR_ANRESTART));
- for (i = 0; i < 100000 / 100; i++) {
+ for (i = 0; i < 30000; i++) {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_BMSR, &status);
if (status & BMSR_ANEGCOMPLETE)
@@ -221,7 +221,7 @@ static int at91emac_phy_reset(struct eth_device *netdev)
} else {
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
netdev->name, status);
- return 1;
+ return -1;
}
return 0;
}
@@ -240,7 +240,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
MII_PHYSID1, &phy_id);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", netdev->name);
- return 1;
+ return -1;
}
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
@@ -249,7 +249,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
if (at91emac_phy_reset(netdev))
- return 2;
+ return -2;
for (i = 0; i < 100000 / 100; i++) {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
@@ -261,7 +261,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
}
if (!(status & BMSR_LSTATUS)) {
VERBOSEP("%s: link down\n", netdev->name);
- return 3;
+ return -3;
} else {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_ADVERTISE, &adv);
@@ -286,7 +286,7 @@ int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1);
if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
- return 1;
+ return -1;
if (stat1 & BMSR_100FULL) {
/*set Emac for 100BaseTX and Full Duplex */
@@ -321,7 +321,7 @@ int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
&emac->cfg);
return 0;
}
- return 1;
+ return 0;
}
static int at91emac_init(struct eth_device *netdev, bd_t *bd)
@@ -387,7 +387,7 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd)
at91emac_UpdateLinkSpeed(emac);
return 0;
}
- return 1;
+ return -1;
}
static void at91emac_halt(struct eth_device *netdev)
@@ -489,11 +489,11 @@ int at91emac_register(bd_t *bis, unsigned long iobase)
iobase = AT91_EMAC_BASE;
emac = malloc(sizeof(*emac)+512);
if (emac == NULL)
- return 1;
+ return -1;
dev = malloc(sizeof(*dev));
if (dev == NULL) {
free(emac);
- return 1;
+ return -1;
}
/* alignment as per Errata (64 bytes) is insufficient! */
emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00);
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 41a9910..e06896f 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -65,21 +65,6 @@ void eth_mdio_enable(void)
davinci_eth_mdio_enable();
}
-static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-/*
- * This function must be called before emac_open() if you want to override
- * the default mac address.
- */
-void davinci_eth_set_mac_addr(const u_int8_t *addr)
-{
- int i;
-
- for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
- davinci_eth_mac_addr[i] = addr[i];
- }
-}
-
/* EMAC Addresses */
static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
@@ -100,6 +85,43 @@ static volatile u_int8_t active_phy_addr = 0xff;
phy_t phy;
+static int davinci_eth_set_mac_addr(struct eth_device *dev)
+{
+ unsigned long mac_hi;
+ unsigned long mac_lo;
+
+ /*
+ * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
+ * receive)
+ * Using channel 0 only - other channels are disabled
+ * */
+ writel(0, &adap_emac->MACINDEX);
+ mac_hi = (dev->enetaddr[3] << 24) |
+ (dev->enetaddr[2] << 16) |
+ (dev->enetaddr[1] << 8) |
+ (dev->enetaddr[0]);
+ mac_lo = (dev->enetaddr[5] << 8) |
+ (dev->enetaddr[4]);
+
+ writel(mac_hi, &adap_emac->MACADDRHI);
+#if defined(DAVINCI_EMAC_VERSION2)
+ writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
+ &adap_emac->MACADDRLO);
+#else
+ writel(mac_lo, &adap_emac->MACADDRLO);
+#endif
+
+ writel(0, &adap_emac->MACHASH1);
+ writel(0, &adap_emac->MACHASH2);
+
+ /* Set source MAC address - REQUIRED */
+ writel(mac_hi, &adap_emac->MACSRCADDRHI);
+ writel(mac_lo, &adap_emac->MACSRCADDRLO);
+
+
+ return 0;
+}
+
static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
@@ -286,8 +308,6 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
dv_reg_p addr;
u_int32_t clkdiv, cnt;
volatile emac_desc *rx_desc;
- unsigned long mac_hi;
- unsigned long mac_lo;
debug_emac("+ emac_open\n");
@@ -311,30 +331,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
writel(1, &adap_emac->TXCONTROL);
writel(1, &adap_emac->RXCONTROL);
- /* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */
- /* Using channel 0 only - other channels are disabled */
- writel(0, &adap_emac->MACINDEX);
- mac_hi = (davinci_eth_mac_addr[3] << 24) |
- (davinci_eth_mac_addr[2] << 16) |
- (davinci_eth_mac_addr[1] << 8) |
- (davinci_eth_mac_addr[0]);
- mac_lo = (davinci_eth_mac_addr[5] << 8) |
- (davinci_eth_mac_addr[4]);
-
- writel(mac_hi, &adap_emac->MACADDRHI);
-#if defined(DAVINCI_EMAC_VERSION2)
- writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
- &adap_emac->MACADDRLO);
-#else
- writel(mac_lo, &adap_emac->MACADDRLO);
-#endif
-
- writel(0, &adap_emac->MACHASH1);
- writel(0, &adap_emac->MACHASH2);
-
- /* Set source MAC address - REQUIRED */
- writel(mac_hi, &adap_emac->MACSRCADDRHI);
- writel(mac_lo, &adap_emac->MACSRCADDRLO);
+ davinci_eth_set_mac_addr(dev);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
@@ -636,6 +633,7 @@ int davinci_emac_initialize(void)
dev->halt = davinci_eth_close;
dev->send = davinci_eth_send_packet;
dev->recv = davinci_eth_rcv_packet;
+ dev->write_hwaddr = davinci_eth_set_mac_addr;
eth_register(dev);
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 3238a50..6c161b6 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1,4 +1,9 @@
/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ * Martin Krause, Martin.Krause@tqs.de
+ * reworked original enc28j60.c
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -6,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -15,968 +20,959 @@
* MA 02111-1307 USA
*/
-#include <config.h>
#include <common.h>
#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-/*
- * Control Registers in Bank 0
- */
-
-#define CTL_REG_ERDPTL 0x00
-#define CTL_REG_ERDPTH 0x01
-#define CTL_REG_EWRPTL 0x02
-#define CTL_REG_EWRPTH 0x03
-#define CTL_REG_ETXSTL 0x04
-#define CTL_REG_ETXSTH 0x05
-#define CTL_REG_ETXNDL 0x06
-#define CTL_REG_ETXNDH 0x07
-#define CTL_REG_ERXSTL 0x08
-#define CTL_REG_ERXSTH 0x09
-#define CTL_REG_ERXNDL 0x0A
-#define CTL_REG_ERXNDH 0x0B
-#define CTL_REG_ERXRDPTL 0x0C
-#define CTL_REG_ERXRDPTH 0x0D
-#define CTL_REG_ERXWRPTL 0x0E
-#define CTL_REG_ERXWRPTH 0x0F
-#define CTL_REG_EDMASTL 0x10
-#define CTL_REG_EDMASTH 0x11
-#define CTL_REG_EDMANDL 0x12
-#define CTL_REG_EDMANDH 0x13
-#define CTL_REG_EDMADSTL 0x14
-#define CTL_REG_EDMADSTH 0x15
-#define CTL_REG_EDMACSL 0x16
-#define CTL_REG_EDMACSH 0x17
-/* these are common in all banks */
-#define CTL_REG_EIE 0x1B
-#define CTL_REG_EIR 0x1C
-#define CTL_REG_ESTAT 0x1D
-#define CTL_REG_ECON2 0x1E
-#define CTL_REG_ECON1 0x1F
-
-/*
- * Control Registers in Bank 1
- */
-
-#define CTL_REG_EHT0 0x00
-#define CTL_REG_EHT1 0x01
-#define CTL_REG_EHT2 0x02
-#define CTL_REG_EHT3 0x03
-#define CTL_REG_EHT4 0x04
-#define CTL_REG_EHT5 0x05
-#define CTL_REG_EHT6 0x06
-#define CTL_REG_EHT7 0x07
-#define CTL_REG_EPMM0 0x08
-#define CTL_REG_EPMM1 0x09
-#define CTL_REG_EPMM2 0x0A
-#define CTL_REG_EPMM3 0x0B
-#define CTL_REG_EPMM4 0x0C
-#define CTL_REG_EPMM5 0x0D
-#define CTL_REG_EPMM6 0x0E
-#define CTL_REG_EPMM7 0x0F
-#define CTL_REG_EPMCSL 0x10
-#define CTL_REG_EPMCSH 0x11
-#define CTL_REG_EPMOL 0x14
-#define CTL_REG_EPMOH 0x15
-#define CTL_REG_EWOLIE 0x16
-#define CTL_REG_EWOLIR 0x17
-#define CTL_REG_ERXFCON 0x18
-#define CTL_REG_EPKTCNT 0x19
-
-/*
- * Control Registers in Bank 2
- */
-
-#define CTL_REG_MACON1 0x00
-#define CTL_REG_MACON2 0x01
-#define CTL_REG_MACON3 0x02
-#define CTL_REG_MACON4 0x03
-#define CTL_REG_MABBIPG 0x04
-#define CTL_REG_MAIPGL 0x06
-#define CTL_REG_MAIPGH 0x07
-#define CTL_REG_MACLCON1 0x08
-#define CTL_REG_MACLCON2 0x09
-#define CTL_REG_MAMXFLL 0x0A
-#define CTL_REG_MAMXFLH 0x0B
-#define CTL_REG_MAPHSUP 0x0D
-#define CTL_REG_MICON 0x11
-#define CTL_REG_MICMD 0x12
-#define CTL_REG_MIREGADR 0x14
-#define CTL_REG_MIWRL 0x16
-#define CTL_REG_MIWRH 0x17
-#define CTL_REG_MIRDL 0x18
-#define CTL_REG_MIRDH 0x19
-
-/*
- * Control Registers in Bank 3
- */
-
-#define CTL_REG_MAADR1 0x00
-#define CTL_REG_MAADR0 0x01
-#define CTL_REG_MAADR3 0x02
-#define CTL_REG_MAADR2 0x03
-#define CTL_REG_MAADR5 0x04
-#define CTL_REG_MAADR4 0x05
-#define CTL_REG_EBSTSD 0x06
-#define CTL_REG_EBSTCON 0x07
-#define CTL_REG_EBSTCSL 0x08
-#define CTL_REG_EBSTCSH 0x09
-#define CTL_REG_MISTAT 0x0A
-#define CTL_REG_EREVID 0x12
-#define CTL_REG_ECOCON 0x15
-#define CTL_REG_EFLOCON 0x17
-#define CTL_REG_EPAUSL 0x18
-#define CTL_REG_EPAUSH 0x19
-
-
-/*
- * PHY Register
- */
-
-#define PHY_REG_PHID1 0x02
-#define PHY_REG_PHID2 0x03
-/* taken from the Linux driver */
-#define PHY_REG_PHCON1 0x00
-#define PHY_REG_PHCON2 0x10
-#define PHY_REG_PHLCON 0x14
-
-/*
- * Receive Filter Register (ERXFCON) bits
- */
-
-#define ENC_RFR_UCEN 0x80
-#define ENC_RFR_ANDOR 0x40
-#define ENC_RFR_CRCEN 0x20
-#define ENC_RFR_PMEN 0x10
-#define ENC_RFR_MPEN 0x08
-#define ENC_RFR_HTEN 0x04
-#define ENC_RFR_MCEN 0x02
-#define ENC_RFR_BCEN 0x01
+#include <spi.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include "enc28j60.h"
/*
- * ECON1 Register Bits
+ * IMPORTANT: spi_claim_bus() and spi_release_bus()
+ * are called at begin and end of each of the following functions:
+ * enc_miiphy_read(), enc_miiphy_write(), enc_write_hwaddr(),
+ * enc_init(), enc_recv(), enc_send(), enc_halt()
+ * ALL other functions assume that the bus has already been claimed!
+ * Since NetReceive() might call enc_send() in return, the bus must be
+ * released, NetReceive() called and claimed again.
*/
-#define ENC_ECON1_TXRST 0x80
-#define ENC_ECON1_RXRST 0x40
-#define ENC_ECON1_DMAST 0x20
-#define ENC_ECON1_CSUMEN 0x10
-#define ENC_ECON1_TXRTS 0x08
-#define ENC_ECON1_RXEN 0x04
-#define ENC_ECON1_BSEL1 0x02
-#define ENC_ECON1_BSEL0 0x01
-
/*
- * ECON2 Register Bits
+ * Controller memory layout.
+ * We only allow 1 frame for transmission and reserve the rest
+ * for reception to handle as many broadcast packets as possible.
+ * Also use the memory from 0x0000 for receiver buffer. See errata pt. 5
+ * 0x0000 - 0x19ff 6656 bytes receive buffer
+ * 0x1a00 - 0x1fff 1536 bytes transmit buffer =
+ * control(1)+frame(1518)+status(7)+reserve(10).
*/
-#define ENC_ECON2_AUTOINC 0x80
-#define ENC_ECON2_PKTDEC 0x40
-#define ENC_ECON2_PWRSV 0x20
-#define ENC_ECON2_VRPS 0x08
+#define ENC_RX_BUF_START 0x0000
+#define ENC_RX_BUF_END 0x19ff
+#define ENC_TX_BUF_START 0x1a00
+#define ENC_TX_BUF_END 0x1fff
+#define ENC_MAX_FRM_LEN 1518
+#define RX_RESET_COUNTER 1000
/*
- * EIR Register Bits
+ * For non data transfer functions, like phy read/write, set hwaddr, init
+ * we do not need a full, time consuming init including link ready wait.
+ * This enum helps to bring the chip through the minimum necessary inits.
*/
-#define ENC_EIR_PKTIF 0x40
-#define ENC_EIR_DMAIF 0x20
-#define ENC_EIR_LINKIF 0x10
-#define ENC_EIR_TXIF 0x08
-#define ENC_EIR_WOLIF 0x04
-#define ENC_EIR_TXERIF 0x02
-#define ENC_EIR_RXERIF 0x01
+enum enc_initstate {none=0, setupdone, linkready};
+typedef struct enc_device {
+ struct eth_device *dev; /* back pointer */
+ struct spi_slave *slave;
+ int rx_reset_counter;
+ u16 next_pointer;
+ u8 bank; /* current bank in enc28j60 */
+ enum enc_initstate initstate;
+} enc_dev_t;
/*
- * ESTAT Register Bits
+ * enc_bset: set bits in a common register
+ * enc_bclr: clear bits in a common register
+ *
+ * making the reg parameter u8 will give a compile time warning if the
+ * functions are called with a register not accessible in all Banks
*/
+static void enc_bset(enc_dev_t *enc, const u8 reg, const u8 data)
+{
+ u8 dout[2];
-#define ENC_ESTAT_INT 0x80
-#define ENC_ESTAT_LATECOL 0x10
-#define ENC_ESTAT_RXBUSY 0x04
-#define ENC_ESTAT_TXABRT 0x02
-#define ENC_ESTAT_CLKRDY 0x01
+ dout[0] = CMD_BFS(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
-/*
- * EIE Register Bits
- */
+static void enc_bclr(enc_dev_t *enc, const u8 reg, const u8 data)
+{
+ u8 dout[2];
-#define ENC_EIE_INTIE 0x80
-#define ENC_EIE_PKTIE 0x40
-#define ENC_EIE_DMAIE 0x20
-#define ENC_EIE_LINKIE 0x10
-#define ENC_EIE_TXIE 0x08
-#define ENC_EIE_WOLIE 0x04
-#define ENC_EIE_TXERIE 0x02
-#define ENC_EIE_RXERIE 0x01
+ dout[0] = CMD_BFC(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
/*
- * MACON1 Register Bits
+ * high byte of the register contains bank number:
+ * 0: no bank switch necessary
+ * 1: switch to bank 0
+ * 2: switch to bank 1
+ * 3: switch to bank 2
+ * 4: switch to bank 3
*/
-#define ENC_MACON1_LOOPBK 0x10
-#define ENC_MACON1_TXPAUS 0x08
-#define ENC_MACON1_RXPAUS 0x04
-#define ENC_MACON1_PASSALL 0x02
-#define ENC_MACON1_MARXEN 0x01
-
+static void enc_set_bank(enc_dev_t *enc, const u16 reg)
+{
+ u8 newbank = reg >> 8;
+
+ if (newbank == 0 || newbank == enc->bank)
+ return;
+ switch (newbank) {
+ case 1:
+ enc_bclr(enc, CTL_REG_ECON1,
+ ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
+ break;
+ case 2:
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ break;
+ case 3:
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ break;
+ case 4:
+ enc_bset(enc, CTL_REG_ECON1,
+ ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
+ break;
+ }
+ enc->bank = newbank;
+}
/*
- * MACON2 Register Bits
+ * local functions to access SPI
+ *
+ * reg: register inside ENC28J60
+ * data: 8/16 bits to write
+ * c: number of retries
+ *
+ * enc_r8: read 8 bits
+ * enc_r16: read 16 bits
+ * enc_w8: write 8 bits
+ * enc_w16: write 16 bits
+ * enc_w8_retry: write 8 bits, verify and retry
+ * enc_rbuf: read from ENC28J60 into buffer
+ * enc_wbuf: write from buffer into ENC28J60
*/
-#define ENC_MACON2_MARST 0x80
-#define ENC_MACON2_RNDRST 0x40
-#define ENC_MACON2_MARXRST 0x08
-#define ENC_MACON2_RFUNRST 0x04
-#define ENC_MACON2_MATXRST 0x02
-#define ENC_MACON2_TFUNRST 0x01
/*
- * MACON3 Register Bits
+ * MAC and MII registers need a 3 byte SPI transfer to read,
+ * all other registers need a 2 byte SPI transfer.
*/
-#define ENC_MACON3_PADCFG2 0x80
-#define ENC_MACON3_PADCFG1 0x40
-#define ENC_MACON3_PADCFG0 0x20
-#define ENC_MACON3_TXCRCEN 0x10
-#define ENC_MACON3_PHDRLEN 0x08
-#define ENC_MACON3_HFRMEN 0x04
-#define ENC_MACON3_FRMLNEN 0x02
-#define ENC_MACON3_FULDPX 0x01
+static int enc_reg2nbytes(const u16 reg)
+{
+ /* check if MAC or MII register */
+ return ((reg >= CTL_REG_MACON1 && reg <= CTL_REG_MIRDH) ||
+ (reg >= CTL_REG_MAADR1 && reg <= CTL_REG_MAADR4) ||
+ (reg == CTL_REG_MISTAT)) ? 3 : 2;
+}
/*
- * MICMD Register Bits
+ * Read a byte register
*/
-#define ENC_MICMD_MIISCAN 0x02
-#define ENC_MICMD_MIIRD 0x01
+static u8 enc_r8(enc_dev_t *enc, const u16 reg)
+{
+ u8 dout[3];
+ u8 din[3];
+ int nbytes = enc_reg2nbytes(reg);
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_RCR(reg);
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ return din[nbytes-1];
+}
/*
- * MISTAT Register Bits
+ * Read a L/H register pair and return a word.
+ * Must be called with the L register's address.
*/
-#define ENC_MISTAT_NVALID 0x04
-#define ENC_MISTAT_SCAN 0x02
-#define ENC_MISTAT_BUSY 0x01
+static u16 enc_r16(enc_dev_t *enc, const u16 reg)
+{
+ u8 dout[3];
+ u8 din[3];
+ u16 result;
+ int nbytes = enc_reg2nbytes(reg);
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_RCR(reg);
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ result = din[nbytes-1];
+ dout[0]++; /* next register */
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ result |= din[nbytes-1] << 8;
+ return result;
+}
/*
- * PHID1 and PHID2 values
+ * Write a byte register
*/
-#define ENC_PHID1_VALUE 0x0083
-#define ENC_PHID2_VALUE 0x1400
-#define ENC_PHID2_MASK 0xFC00
-
-
-#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
-#define ENC_RESET 0x00020000 /* pin P1.17 */
+static void enc_w8(enc_dev_t *enc, const u16 reg, const u8 data)
+{
+ u8 dout[2];
-#define FAILSAFE_VALUE 5000
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
/*
- * Controller memory layout:
- *
- * 0x0000 - 0x17ff 6k bytes receive buffer
- * 0x1800 - 0x1fff 2k bytes transmit buffer
- */
-/* Use the lower memory for receiver buffer. See errata pt. 5 */
-#define ENC_RX_BUF_START 0x0000
-#define ENC_TX_BUF_START 0x1800
-/* taken from the Linux driver */
-#define ENC_RX_BUF_END 0x17ff
-#define ENC_TX_BUF_END 0x1fff
-
-/* maximum frame length */
-#define ENC_MAX_FRM_LEN 1518
-
-#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
-#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
-#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
-
-
-static unsigned char encReadReg (unsigned char regNo);
-static void encWriteReg (unsigned char regNo, unsigned char data);
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
-static void encReadBuff (unsigned short length, unsigned char *pBuff);
-static void encWriteBuff (unsigned short length, unsigned char *pBuff);
-static void encBitSet (unsigned char regNo, unsigned char data);
-static void encBitClr (unsigned char regNo, unsigned char data);
-static void encReset (void);
-static void encInit (unsigned char *pEthAddr);
-static unsigned short phyRead (unsigned char addr);
-static void phyWrite(unsigned char, unsigned short);
-static void encPoll (void);
-static void encRx (void);
-
-#define m_nic_read(reg) encReadReg(reg)
-#define m_nic_write(reg, data) encWriteReg(reg, data)
-#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
-#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
-#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
-
-/* bit field set */
-#define m_nic_bfs(reg, data) encBitSet(reg, data)
-
-/* bit field clear */
-#define m_nic_bfc(reg, data) encBitClr(reg, data)
-
-static unsigned char bank = 0; /* current bank in enc28j60 */
-static unsigned char next_pointer_lsb;
-static unsigned char next_pointer_msb;
-
-static unsigned char buffer[ENC_MAX_FRM_LEN];
-static int rxResetCounter = 0;
-
-#define RX_RESET_COUNTER 1000;
-
-/*-----------------------------------------------------------------------------
- * Always returns 0
+ * Write a L/H register pair.
+ * Must be called with the L register's address.
*/
-int eth_init (bd_t * bis)
+static void enc_w16(enc_dev_t *enc, const u16 reg, const u16 data)
{
- unsigned char estatVal;
- uchar enetaddr[6];
-
- /* configure GPIO */
- (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
- (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
-
- /* CS and RESET active low */
- PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
- PUT32 (IO1SET, ENC_RESET);
-
- spi_init ();
-
- /* taken from the Linux driver - dangerous stuff here! */
- /* Wait for CLKRDY to become set (i.e., check that we can communicate with
- the ENC) */
- do
- {
- estatVal = m_nic_read(CTL_REG_ESTAT);
- } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
-
- /* initialize controller */
- encReset ();
- eth_getenv_enetaddr("ethaddr", enetaddr);
- encInit (enetaddr);
-
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
-
- return 0;
+ u8 dout[2];
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ dout[0]++; /* next register */
+ dout[1] = data >> 8;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
}
-int eth_send (volatile void *packet, int length)
+/*
+ * Write a byte register, verify and retry
+ */
+static void enc_w8_retry(enc_dev_t *enc, const u16 reg, const u8 data, const int c)
{
- /* check frame length, etc. */
- /* TODO: */
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- /* set EWRPT */
- m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
- m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
-
- /* set ETXND */
- m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
- m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
-
- /* set ETXST */
- m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
- m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
-
- /* write packet */
- m_nic_write_data (length, (unsigned char *) packet);
+ u8 dout[2];
+ u8 readback;
+ int i;
- /* taken from the Linux driver */
- /* Verify that the internal transmit logic has not been altered by excessive
- collisions. See Errata B4 12 and 14.
- */
- if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ enc_set_bank(enc, reg);
+ for (i = 0; i < c; i++) {
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ readback = enc_r8(enc, reg);
+ if (readback == data)
+ break;
+ /* wait 1ms */
+ udelay(1000);
+ }
+ if (i == c) {
+ printf("%s: write reg 0x%03x failed\n", enc->dev->name, reg);
}
- m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
-
- /* set ECON1.TXRTS */
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
-
- return 0;
}
-
-/*****************************************************************************
- * This function resets the receiver only. This function may be called from
- * interrupt-context.
+/*
+ * Read ENC RAM into buffer
*/
-static void encReceiverReset (void)
+static void enc_rbuf(enc_dev_t *enc, const u16 length, u8 *buf)
{
- unsigned char econ1;
-
- econ1 = m_nic_read (CTL_REG_ECON1);
- if ((econ1 & ENC_ECON1_RXRST) == 0) {
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
- rxResetCounter = RX_RESET_COUNTER;
- }
+ u8 dout[1];
+
+ dout[0] = CMD_RBM;
+ spi_xfer(enc->slave, 8, dout, NULL, SPI_XFER_BEGIN);
+ spi_xfer(enc->slave, length * 8, NULL, buf, SPI_XFER_END);
+#ifdef DEBUG
+ puts("Rx:\n");
+ print_buffer(0, buf, 1, length, 0);
+#endif
}
-/*****************************************************************************
- * receiver reset timer
+/*
+ * Write buffer into ENC RAM
*/
-static void encReceiverResetCallback (void)
+static void enc_wbuf(enc_dev_t *enc, const u16 length, const u8 *buf, const u8 control)
{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+ u8 dout[2];
+ dout[0] = CMD_WBM;
+ dout[1] = control;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL, SPI_XFER_BEGIN);
+ spi_xfer(enc->slave, length * 8, buf, NULL, SPI_XFER_END);
+#ifdef DEBUG
+ puts("Tx:\n");
+ print_buffer(0, buf, 1, length, 0);
+#endif
}
-/*-----------------------------------------------------------------------------
- * Check for received packets. Call NetReceive for each packet. The return
- * value is ignored by the caller.
+/*
+ * Try to claim the SPI bus.
+ * Print error message on failure.
*/
-int eth_rx (void)
+static int enc_claim_bus(enc_dev_t *enc)
{
- if (rxResetCounter > 0 && --rxResetCounter == 0) {
- encReceiverResetCallback ();
- }
-
- encPoll ();
-
- return 0;
+ int rc = spi_claim_bus(enc->slave);
+ if (rc)
+ printf("%s: failed to claim SPI bus\n", enc->dev->name);
+ return rc;
}
-void eth_halt (void)
+/*
+ * Release previously claimed SPI bus.
+ * This function is mainly for symmetry to enc_claim_bus().
+ * Let the toolchain decide to inline it...
+ */
+static void enc_release_bus(enc_dev_t *enc)
{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+ spi_release_bus(enc->slave);
}
-/*****************************************************************************/
-
-static void encPoll (void)
+/*
+ * Read PHY register
+ */
+static u16 phy_read(enc_dev_t *enc, const u8 addr)
{
- unsigned char eir_reg;
- volatile unsigned char estat_reg;
- unsigned char pkt_cnt;
+ uint64_t etime;
+ u8 status;
-#ifdef CONFIG_USE_IRQ
- /* clear global interrupt enable bit in enc28j60 */
- m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
- estat_reg = m_nic_read (CTL_REG_ESTAT);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
-
- if (eir_reg & ENC_EIR_TXIF) {
- /* clear TXIF bit in EIR */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ enc_w8(enc, CTL_REG_MIREGADR, addr);
+ enc_w8(enc, CTL_REG_MICMD, ENC_MICMD_MIIRD);
+ /* 1 second timeout - only happens on hardware problem */
+ etime = get_ticks() + get_tbclk();
+ /* poll MISTAT.BUSY bit until operation is complete */
+ do
+ {
+ status = enc_r8(enc, CTL_REG_MISTAT);
+ } while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
+ if (status & ENC_MISTAT_BUSY) {
+ printf("%s: timeout reading phy\n", enc->dev->name);
+ return 0;
}
+ enc_w8(enc, CTL_REG_MICMD, 0);
+ return enc_r16(enc, CTL_REG_MIRDL);
+}
- /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+/*
+ * Write PHY register
+ */
+static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+{
+ uint64_t etime;
+ u8 status;
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_w8(enc, CTL_REG_MIREGADR, addr);
+ enc_w16(enc, CTL_REG_MIWRL, data);
+ /* 1 second timeout - only happens on hardware problem */
+ etime = get_ticks() + get_tbclk();
+ /* poll MISTAT.BUSY bit until operation is complete */
+ do
+ {
+ status = enc_r8(enc, CTL_REG_MISTAT);
+ } while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
+ if (status & ENC_MISTAT_BUSY) {
+ printf("%s: timeout writing phy\n", enc->dev->name);
+ return;
+ }
+}
- /* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+/*
+ * Verify link status, wait if necessary
+ *
+ * Note: with a 10 MBit/s only PHY there is no autonegotiation possible,
+ * half/full duplex is a pure setup matter. For the time being, this driver
+ * will setup in half duplex mode only.
+ */
+static int enc_phy_link_wait(enc_dev_t *enc)
+{
+ u16 status;
+ int duplex;
+ uint64_t etime;
+
+#ifdef CONFIG_ENC_SILENTLINK
+ /* check if we have a link, then just return */
+ status = phy_read(enc, PHY_REG_PHSTAT1);
+ if (status & ENC_PHSTAT1_LLSTAT)
+ return 0;
+#endif
- if (pkt_cnt > 0) {
- if ((eir_reg & ENC_EIR_PKTIF) == 0) {
- /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ /* wait for link with 1 second timeout */
+ etime = get_ticks() + get_tbclk();
+ while (get_ticks() <= etime) {
+ status = phy_read(enc, PHY_REG_PHSTAT1);
+ if (status & ENC_PHSTAT1_LLSTAT) {
+ /* now we have a link */
+ status = phy_read(enc, PHY_REG_PHSTAT2);
+ duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
+ printf("%s: link up, 10Mbps %s-duplex\n",
+ enc->dev->name, duplex ? "full" : "half");
+ return 0;
}
- encRx ();
- /* clear PKTIF bit in EIR, this should not need to be done but it
- seems like we get problems if we do not */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ udelay(1000);
}
- if (eir_reg & ENC_EIR_RXERIF) {
- printf ("encPoll: rx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
- }
- if (eir_reg & ENC_EIR_TXERIF) {
- printf ("encPoll: tx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
- }
-
-#ifdef CONFIG_USE_IRQ
- /* set global interrupt enable bit in enc28j60 */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
+ /* timeout occured */
+ printf("%s: link down\n", enc->dev->name);
+ return 1;
}
-static void encRx (void)
+/*
+ * This function resets the receiver only.
+ */
+static void enc_reset_rx(enc_dev_t *enc)
{
- unsigned short pkt_len;
- unsigned short copy_len;
- unsigned short status;
- unsigned char eir_reg;
- unsigned char pkt_cnt = 0;
- unsigned short rxbuf_rdpt;
+ u8 econ1;
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+ econ1 = enc_r8(enc, CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
+ enc->rx_reset_counter = RX_RESET_COUNTER;
+ }
+}
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+/*
+ * Reset receiver and reenable it.
+ */
+static void enc_reset_rx_call(enc_dev_t *enc)
+{
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+}
+/*
+ * Copy a packet from the receive ring and forward it to
+ * the protocol stack.
+ */
+static void enc_receive(enc_dev_t *enc)
+{
+ u8 *packet = (u8 *)NetRxPackets[0];
+ u16 pkt_len;
+ u16 copy_len;
+ u16 status;
+ u8 eir_reg;
+ u8 pkt_cnt = 0;
+ u16 rxbuf_rdpt;
+ u8 hbuf[6];
+
+ enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
do {
- m_nic_read_data (6, buffer);
- next_pointer_lsb = buffer[0];
- next_pointer_msb = buffer[1];
- pkt_len = buffer[2];
- pkt_len |= (unsigned short) buffer[3] << 8;
- status = buffer[4];
- status |= (unsigned short) buffer[5] << 8;
-
+ enc_rbuf(enc, 6, hbuf);
+ enc->next_pointer = hbuf[0] | (hbuf[1] << 8);
+ pkt_len = hbuf[2] | (hbuf[3] << 8);
+ status = hbuf[4] | (hbuf[5] << 8);
+ debug("next_pointer=$%04x pkt_len=%u status=$%04x\n",
+ enc->next_pointer, pkt_len, status);
if (pkt_len <= ENC_MAX_FRM_LEN)
copy_len = pkt_len;
else
copy_len = 0;
-
if ((status & (1L << 7)) == 0) /* check Received Ok bit */
copy_len = 0;
-
- /* taken from the Linux driver */
/* check if next pointer is resonable */
- if ((((unsigned int)next_pointer_msb << 8) |
- (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ if (enc->next_pointer >= ENC_TX_BUF_START)
copy_len = 0;
-
if (copy_len > 0) {
- m_nic_read_data (copy_len, buffer);
+ enc_rbuf(enc, copy_len, packet);
}
-
/* advance read pointer to next pointer */
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
-
+ enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
/* decrease packet counter */
- m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
-
- /* taken from the Linux driver */
- /* Only odd values should be written to ERXRDPTL,
+ enc_bset(enc, CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+ /*
+ * Only odd values should be written to ERXRDPTL,
* see errata B4 pt.13
*/
- rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
- if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
- m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
- (m_nic_read(CTL_REG_ERXNDH) << 8 |
- m_nic_read(CTL_REG_ERXNDL)))) {
- m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
- m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ rxbuf_rdpt = enc->next_pointer - 1;
+ if ((rxbuf_rdpt < enc_r16(enc, CTL_REG_ERXSTL)) ||
+ (rxbuf_rdpt > enc_r16(enc, CTL_REG_ERXNDL))) {
+ enc_w16(enc, CTL_REG_ERXRDPTL,
+ enc_r16(enc, CTL_REG_ERXNDL));
} else {
- m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
- m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ enc_w16(enc, CTL_REG_ERXRDPTL, rxbuf_rdpt);
}
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
/* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1,
- (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
+ pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
if (copy_len == 0) {
- eir_reg = m_nic_read (CTL_REG_EIR);
- encReceiverReset ();
- printf ("eth_rx: copy_len=0\n");
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ enc_reset_rx(enc);
+ printf("%s: receive copy_len=0\n", enc->dev->name);
continue;
}
-
- NetReceive ((unsigned char *) buffer, pkt_len);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
- } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
-}
-
-static void encWriteReg (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
- spi_unlock ();
+ /*
+ * Because NetReceive() might call enc_send(), we need to
+ * release the SPI bus, call NetReceive(), reclaim the bus
+ */
+ enc_release_bus(enc);
+ NetReceive(packet, pkt_len);
+ if (enc_claim_bus(enc))
+ return;
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ } while (pkt_cnt);
+ /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
}
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+/*
+ * Poll for completely received packets.
+ */
+static void enc_poll(enc_dev_t *enc)
{
- unsigned char readback;
- int i;
-
- spi_lock ();
+ u8 eir_reg;
+ u8 estat_reg;
+ u8 pkt_cnt;
- for (i = 0; i < c; i++) {
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
-
- spi_unlock (); /* we must unlock spi first */
-
- readback = encReadReg (regNo);
-
- spi_lock ();
-
- if (readback == data)
- break;
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = enc_r8(enc, CTL_REG_ESTAT);
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXIF);
}
- spi_unlock ();
-
- if (i == c) {
- printf ("enc28j60: write reg %d failed\n", regNo);
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+ pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ debug("enc_poll: pkt cnt > 0, but pktif not set\n");
+ }
+ enc_receive(enc);
+ /*
+ * clear PKTIF bit in EIR, this should not need to be done
+ * but it seems like we get problems if we do not
+ */
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_PKTIF);
}
-}
-
-static unsigned char encReadReg (unsigned char regNo)
-{
- unsigned char rxByte;
-
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x1f); /* read reg 0x1f */
-
- bank = spi_read () & 0x3;
-
- enc_disable ();
- enc_enable ();
-
- spi_write (regNo);
- rxByte = spi_read ();
-
- /* check if MAC or MII register */
- if (((bank == 2) && (regNo <= 0x1a)) ||
- ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
- /* ignore first byte and read another byte */
- rxByte = spi_read ();
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf("%s: rx error\n", enc->dev->name);
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_RXERIF);
}
-
- enc_disable ();
- spi_unlock ();
-
- return rxByte;
-}
-
-static void encReadBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x20 | 0x1a); /* read buffer memory */
-
- while (length--) {
- if (pBuff != NULL)
- *pBuff++ = spi_read ();
- else
- spi_write (0);
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf("%s: tx error\n", enc->dev->name);
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF);
}
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encWriteBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x60 | 0x1a); /* write buffer memory */
-
- spi_write (0x00); /* control byte */
-
- while (length--)
- spi_write (*pBuff++);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitSet (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x80 | regNo); /* bit field set */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitClr (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xA0 | regNo); /* bit field clear */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
}
-static void encReset (void)
+/*
+ * Completely Reset the ENC
+ */
+static void enc_reset(enc_dev_t *enc)
{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xff); /* soft reset */
-
- enc_disable ();
- spi_unlock ();
+ u8 dout[1];
+ dout[0] = CMD_SRC;
+ spi_xfer(enc->slave, 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
/* sleep 1 ms. See errata pt. 2 */
- udelay (1000);
+ udelay(1000);
}
-static void encInit (unsigned char *pEthAddr)
-{
- unsigned short phid1 = 0;
- unsigned short phid2 = 0;
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
+/*
+ * Initialisation data for most of the ENC registers
+ */
+static const u16 enc_initdata[] = {
/*
* Setup the buffer space. The reset values are valid for the
* other pointers.
+ *
+ * We shall not write to ERXST, see errata pt. 5. Instead we
+ * have to make sure that ENC_RX_BUS_START is 0.
*/
- /* We shall not write to ERXST, see errata pt. 5. Instead we
- have to make sure that ENC_RX_BUS_START is 0. */
- m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
-
- /* taken from the Linux driver */
- m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
-
- m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
-
- next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
- next_pointer_msb = (ENC_RX_BUF_START >> 8);
-
- /* verify identification */
- phid1 = phyRead (PHY_REG_PHID1);
- phid2 = phyRead (PHY_REG_PHID2);
-
- if (phid1 != ENC_PHID1_VALUE
- || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
- printf ("ERROR: failed to identify controller\n");
- printf ("phid1 = %x, phid2 = %x\n",
- phid1, (phid2 & ENC_PHID2_MASK));
- printf ("should be phid1 = %x, phid2 = %x\n",
- ENC_PHID1_VALUE, ENC_PHID2_VALUE);
- }
-
+ CTL_REG_ERXSTL, ENC_RX_BUF_START,
+ CTL_REG_ERXSTH, ENC_RX_BUF_START >> 8,
+ CTL_REG_ERXNDL, ENC_RX_BUF_END,
+ CTL_REG_ERXNDH, ENC_RX_BUF_END >> 8,
+ CTL_REG_ERDPTL, ENC_RX_BUF_START,
+ CTL_REG_ERDPTH, ENC_RX_BUF_START >> 8,
/*
- * --- MAC Initialization ---
+ * Set the filter to receive only good-CRC, unicast and broadcast
+ * frames.
+ * Note: some DHCP servers return their answers as broadcasts!
+ * So its unwise to remove broadcast from this. This driver
+ * might incur receiver overruns with packet loss on a broadcast
+ * flooded network.
*/
-
- /* Pull MAC out of Reset */
-
- /* switch to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ CTL_REG_ERXFCON, ENC_RFR_BCEN | ENC_RFR_UCEN | ENC_RFR_CRCEN,
/* enable MAC to receive frames */
- /* added some bits from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON1
- ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
- ,10);
+ CTL_REG_MACON1,
+ ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS,
/* configure pad, tx-crc and duplex */
- /* added a bit from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON3
- ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
- ,10);
+ CTL_REG_MACON3,
+ ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN |
+ ENC_MACON3_FRMLNEN,
- /* added 4 new lines from the Linux driver */
/* Allow infinite deferals if the medium is continously busy */
- m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+ CTL_REG_MACON4, ENC_MACON4_DEFER,
/* Late collisions occur beyond 63 bytes */
- m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+ CTL_REG_MACLCON2, 63,
- /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
- m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+ /*
+ * Set (low byte) Non-Back-to_Back Inter-Packet Gap.
+ * Recommended 0x12
+ */
+ CTL_REG_MAIPGL, 0x12,
/*
- * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
- * 0x0c for half-duplex. Nothing for full-duplex
- */
- m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap.
+ * Recommended 0x0c for half-duplex. Nothing for full-duplex
+ */
+ CTL_REG_MAIPGH, 0x0C,
/* set maximum frame length */
- m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
- m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+ CTL_REG_MAMXFLL, ENC_MAX_FRM_LEN,
+ CTL_REG_MAMXFLH, ENC_MAX_FRM_LEN >> 8,
/*
- * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * Set MAC back-to-back inter-packet gap.
+ * Recommended 0x12 for half duplex
* and 0x15 for full duplex.
*/
- m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+ CTL_REG_MABBIPG, 0x12,
- /* set MAC address */
+ /* end of table */
+ 0xffff
+};
- /* switch to bank 3 */
- m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+/*
+ * Wait for the XTAL oscillator to become ready
+ */
+static int enc_clock_wait(enc_dev_t *enc)
+{
+ uint64_t etime;
- m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
- m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
- m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
- m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
- m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
- m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+ /* one second timeout */
+ etime = get_ticks() + get_tbclk();
/*
- * PHY Initialization taken from the Linux driver
+ * Wait for CLKRDY to become set (i.e., check that we can
+ * communicate with the ENC)
*/
+ do
+ {
+ if (enc_r8(enc, CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY)
+ return 0;
+ } while (get_ticks() <= etime);
+
+ printf("%s: timeout waiting for CLKRDY\n", enc->dev->name);
+ return -1;
+}
+
+/*
+ * Write the MAC address into the ENC
+ */
+static int enc_write_macaddr(enc_dev_t *enc)
+{
+ unsigned char *p = enc->dev->enetaddr;
+
+ enc_w8_retry(enc, CTL_REG_MAADR5, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR4, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR3, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR2, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR1, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR0, *p, 5);
+ return 0;
+}
+
+/*
+ * Setup most of the ENC registers
+ */
+static int enc_setup(enc_dev_t *enc)
+{
+ u16 phid1 = 0;
+ u16 phid2 = 0;
+ const u16 *tp;
+
+ /* reset enc struct values */
+ enc->next_pointer = ENC_RX_BUF_START;
+ enc->rx_reset_counter = RX_RESET_COUNTER;
+ enc->bank = 0xff; /* invalidate current bank in enc28j60 */
+
+ /* verify PHY identification */
+ phid1 = phy_read(enc, PHY_REG_PHID1);
+ phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+ if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
+ printf("%s: failed to identify PHY. Found %04x:%04x\n",
+ enc->dev->name, phid1, phid2);
+ return -1;
+ }
- /* Prevent automatic loopback of data beeing transmitted by setting
- ENC_PHCON2_HDLDIS */
- phyWrite(PHY_REG_PHCON2, (1<<8));
+ /* now program registers */
+ for (tp = enc_initdata; *tp != 0xffff; tp += 2)
+ enc_w8_retry(enc, tp[0], tp[1], 10);
+
+ /*
+ * Prevent automatic loopback of data beeing transmitted by setting
+ * ENC_PHCON2_HDLDIS
+ */
+ phy_write(enc, PHY_REG_PHCON2, (1<<8));
- /* LEDs configuration
+ /*
+ * LEDs configuration
* LEDA: LACFG = 0100 -> display link status
* LEDB: LBCFG = 0111 -> display TX & RX activity
* STRCH = 1 -> LED pulses
*/
- phyWrite(PHY_REG_PHLCON, 0x0472);
+ phy_write(enc, PHY_REG_PHLCON, 0x0472);
/* Reset PDPXMD-bit => half duplex */
- phyWrite(PHY_REG_PHCON1, 0);
-
- /*
- * Receive settings
- */
+ phy_write(enc, PHY_REG_PHCON1, 0);
#ifdef CONFIG_USE_IRQ
/* enable interrupts */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
#endif
+
+ return 0;
}
-/*****************************************************************************
- *
- * Description:
- * Read PHY registers.
- *
- * NOTE! This function will change to Bank 2.
- *
- * Params:
- * [in] addr address of the register to read
- *
- * Returns:
- * The value in the register
+/*
+ * Check if ENC has been initialized.
+ * If not, try to initialize it.
+ * Remember initialized state in struct.
*/
-static unsigned short phyRead (unsigned char addr)
+static int enc_initcheck(enc_dev_t *enc, const enum enc_initstate requiredstate)
{
- unsigned short ret = 0;
-
- /* move to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ if (enc->initstate >= requiredstate)
+ return 0;
+
+ if (enc->initstate < setupdone) {
+ /* Initialize the ENC only */
+ enc_reset(enc);
+ /* if any of functions fails, skip the rest and return an error */
+ if (enc_clock_wait(enc) || enc_setup(enc) || enc_write_macaddr(enc)) {
+ return -1;
+ }
+ enc->initstate = setupdone;
+ }
+ /* if that's all we need, return here */
+ if (enc->initstate >= requiredstate)
+ return 0;
- /* write address to MIREGADR */
- m_nic_write (CTL_REG_MIREGADR, addr);
+ /* now wait for link ready condition */
+ if (enc_phy_link_wait(enc)) {
+ return -1;
+ }
+ enc->initstate = linkready;
+ return 0;
+}
- /* set MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+#if defined(CONFIG_CMD_MII)
+/*
+ * Read a PHY register.
+ *
+ * This function is registered with miiphy_register().
+ */
+int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ enc_dev_t *enc;
+
+ if (!dev || phy_adr != 0)
+ return -1;
+
+ enc = dev->priv;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ *value = phy_read(enc, reg);
+ enc_release_bus(enc);
+ return 0;
+}
- /* taken from the Linux driver */
- /* move to bank 3 */
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+/*
+ * Write a PHY register.
+ *
+ * This function is registered with miiphy_register().
+ */
+int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ enc_dev_t *enc;
+
+ if (!dev || phy_adr != 0)
+ return -1;
+
+ enc = dev->priv;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ phy_write(enc, reg, value);
+ enc_release_bus(enc);
+ return 0;
+}
+#endif
- /* poll MISTAT.BUSY bit until operation is complete */
- while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
+/*
+ * Write hardware (MAC) address.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_write_hwaddr(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
- if (cnt++ >= 1000) {
- /* GJ - this seems extremely dangerous! */
- /* printf("#"); */
- cnt = 0;
- }
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
}
+ enc_release_bus(enc);
+ return 0;
+}
- /* taken from the Linux driver */
- /* move to bank 2 */
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+/*
+ * Initialize ENC28J60 for use.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_init(struct eth_device *dev, bd_t *bis)
+{
+ enc_dev_t *enc = dev->priv;
- /* clear MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, 0);
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* enable receive */
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+ enc_release_bus(enc);
+ return 0;
+}
- ret = (m_nic_read (CTL_REG_MIRDH) << 8);
- ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+/*
+ * Check for received packets.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_recv(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
- return ret;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* Check for dead receiver */
+ if (enc->rx_reset_counter > 0)
+ enc->rx_reset_counter--;
+ else
+ enc_reset_rx_call(enc);
+ enc_poll(enc);
+ enc_release_bus(enc);
+ return 0;
}
-/*****************************************************************************
- *
- * Taken from the Linux driver.
- * Description:
- * Write PHY registers.
- *
- * NOTE! This function will change to Bank 3.
+/*
+ * Send a packet.
*
- * Params:
- * [in] addr address of the register to write to
- * [in] data to be written
+ * This function entered into eth_device structure.
*
- * Returns:
- * None
+ * Should we wait here until we have a Link? Or shall we leave that to
+ * protocol retries?
*/
-static void phyWrite(unsigned char addr, unsigned short data)
+static int enc_send(
+ struct eth_device *dev,
+ volatile void *packet,
+ int length)
{
- /* move to bank 2 */
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* setup transmit pointers */
+ enc_w16(enc, CTL_REG_EWRPTL, ENC_TX_BUF_START);
+ enc_w16(enc, CTL_REG_ETXNDL, length + ENC_TX_BUF_START);
+ enc_w16(enc, CTL_REG_ETXSTL, ENC_TX_BUF_START);
+ /* write packet to ENC */
+ enc_wbuf(enc, length, (u8 *) packet, 0x00);
+ /*
+ * Check that the internal transmit logic has not been altered
+ * by excessive collisions. Reset transmitter if so.
+ * See Errata B4 12 and 14.
+ */
+ if (enc_r8(enc, CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ enc_bclr(enc, CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+ /* start transmitting */
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRTS);
+ enc_release_bus(enc);
+ return 0;
+}
- /* write address to MIREGADR */
- m_nic_write(CTL_REG_MIREGADR, addr);
+/*
+ * Finish use of ENC.
+ *
+ * This function entered into eth_device structure.
+ */
+static void enc_halt(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
- m_nic_write(CTL_REG_MIWRL, data & 0xff);
- m_nic_write(CTL_REG_MIWRH, data >> 8);
+ if (enc_claim_bus(enc))
+ return;
+ /* Just disable receiver */
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+ enc_release_bus(enc);
+}
- /* move to bank 3 */
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+/*
+ * This is the only exported function.
+ *
+ * It may be called several times with different bus:cs combinations.
+ */
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct eth_device *dev;
+ enc_dev_t *enc;
- /* poll MISTAT.BUSY bit until operation is complete */
- while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
+ /* try to allocate, check and clear eth_device object */
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ return -1;
+ }
+ memset(dev, 0, sizeof(*dev));
- if(cnt++ >= 1000) {
- cnt = 0;
- }
+ /* try to allocate, check and clear enc_dev_t object */
+ enc = malloc(sizeof(*enc));
+ if (!enc) {
+ free(dev);
+ return -1;
+ }
+ memset(enc, 0, sizeof(*enc));
+
+ /* try to setup the SPI slave */
+ enc->slave = spi_setup_slave(bus, cs, max_hz, mode);
+ if (!enc->slave) {
+ printf("enc28j60: invalid SPI device %i:%i\n", bus, cs);
+ free(enc);
+ free(dev);
+ return -1;
}
+
+ enc->dev = dev;
+ /* now fill the eth_device object */
+ dev->priv = enc;
+ dev->init = enc_init;
+ dev->halt = enc_halt;
+ dev->send = enc_send;
+ dev->recv = enc_recv;
+ dev->write_hwaddr = enc_write_hwaddr;
+ sprintf(dev->name, "enc%i.%i", bus, cs);
+ eth_register(dev);
+#if defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, enc_miiphy_read, enc_miiphy_write);
+#endif
+ return 0;
}
diff --git a/drivers/net/enc28j60.h b/drivers/net/enc28j60.h
new file mode 100644
index 0000000..888c599
--- /dev/null
+++ b/drivers/net/enc28j60.h
@@ -0,0 +1,251 @@
+/*
+ * (X) extracted from enc28j60.c
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _enc28j60_h
+#define _enc28j60_h
+
+/*
+ * SPI Commands
+ *
+ * Bits 7-5: Command
+ * Bits 4-0: Register
+ */
+#define CMD_RCR(x) (0x00+((x)&0x1f)) /* Read Control Register */
+#define CMD_RBM 0x3a /* Read Buffer Memory */
+#define CMD_WCR(x) (0x40+((x)&0x1f)) /* Write Control Register */
+#define CMD_WBM 0x7a /* Write Buffer Memory */
+#define CMD_BFS(x) (0x80+((x)&0x1f)) /* Bit Field Set */
+#define CMD_BFC(x) (0xa0+((x)&0x1f)) /* Bit Field Clear */
+#define CMD_SRC 0xff /* System Reset Command */
+
+/* NEW: encode (bank number+1) in upper byte */
+
+/* Common Control Registers accessible in all Banks */
+#define CTL_REG_EIE 0x01B
+#define CTL_REG_EIR 0x01C
+#define CTL_REG_ESTAT 0x01D
+#define CTL_REG_ECON2 0x01E
+#define CTL_REG_ECON1 0x01F
+
+/* Control Registers accessible in Bank 0 */
+#define CTL_REG_ERDPTL 0x100
+#define CTL_REG_ERDPTH 0x101
+#define CTL_REG_EWRPTL 0x102
+#define CTL_REG_EWRPTH 0x103
+#define CTL_REG_ETXSTL 0x104
+#define CTL_REG_ETXSTH 0x105
+#define CTL_REG_ETXNDL 0x106
+#define CTL_REG_ETXNDH 0x107
+#define CTL_REG_ERXSTL 0x108
+#define CTL_REG_ERXSTH 0x109
+#define CTL_REG_ERXNDL 0x10A
+#define CTL_REG_ERXNDH 0x10B
+#define CTL_REG_ERXRDPTL 0x10C
+#define CTL_REG_ERXRDPTH 0x10D
+#define CTL_REG_ERXWRPTL 0x10E
+#define CTL_REG_ERXWRPTH 0x10F
+#define CTL_REG_EDMASTL 0x110
+#define CTL_REG_EDMASTH 0x111
+#define CTL_REG_EDMANDL 0x112
+#define CTL_REG_EDMANDH 0x113
+#define CTL_REG_EDMADSTL 0x114
+#define CTL_REG_EDMADSTH 0x115
+#define CTL_REG_EDMACSL 0x116
+#define CTL_REG_EDMACSH 0x117
+
+/* Control Registers accessible in Bank 1 */
+#define CTL_REG_EHT0 0x200
+#define CTL_REG_EHT1 0x201
+#define CTL_REG_EHT2 0x202
+#define CTL_REG_EHT3 0x203
+#define CTL_REG_EHT4 0x204
+#define CTL_REG_EHT5 0x205
+#define CTL_REG_EHT6 0x206
+#define CTL_REG_EHT7 0x207
+#define CTL_REG_EPMM0 0x208
+#define CTL_REG_EPMM1 0x209
+#define CTL_REG_EPMM2 0x20A
+#define CTL_REG_EPMM3 0x20B
+#define CTL_REG_EPMM4 0x20C
+#define CTL_REG_EPMM5 0x20D
+#define CTL_REG_EPMM6 0x20E
+#define CTL_REG_EPMM7 0x20F
+#define CTL_REG_EPMCSL 0x210
+#define CTL_REG_EPMCSH 0x211
+#define CTL_REG_EPMOL 0x214
+#define CTL_REG_EPMOH 0x215
+#define CTL_REG_EWOLIE 0x216
+#define CTL_REG_EWOLIR 0x217
+#define CTL_REG_ERXFCON 0x218
+#define CTL_REG_EPKTCNT 0x219
+
+/* Control Registers accessible in Bank 2 */
+#define CTL_REG_MACON1 0x300
+#define CTL_REG_MACON2 0x301
+#define CTL_REG_MACON3 0x302
+#define CTL_REG_MACON4 0x303
+#define CTL_REG_MABBIPG 0x304
+#define CTL_REG_MAIPGL 0x306
+#define CTL_REG_MAIPGH 0x307
+#define CTL_REG_MACLCON1 0x308
+#define CTL_REG_MACLCON2 0x309
+#define CTL_REG_MAMXFLL 0x30A
+#define CTL_REG_MAMXFLH 0x30B
+#define CTL_REG_MAPHSUP 0x30D
+#define CTL_REG_MICON 0x311
+#define CTL_REG_MICMD 0x312
+#define CTL_REG_MIREGADR 0x314
+#define CTL_REG_MIWRL 0x316
+#define CTL_REG_MIWRH 0x317
+#define CTL_REG_MIRDL 0x318
+#define CTL_REG_MIRDH 0x319
+
+/* Control Registers accessible in Bank 3 */
+#define CTL_REG_MAADR1 0x400
+#define CTL_REG_MAADR0 0x401
+#define CTL_REG_MAADR3 0x402
+#define CTL_REG_MAADR2 0x403
+#define CTL_REG_MAADR5 0x404
+#define CTL_REG_MAADR4 0x405
+#define CTL_REG_EBSTSD 0x406
+#define CTL_REG_EBSTCON 0x407
+#define CTL_REG_EBSTCSL 0x408
+#define CTL_REG_EBSTCSH 0x409
+#define CTL_REG_MISTAT 0x40A
+#define CTL_REG_EREVID 0x412
+#define CTL_REG_ECOCON 0x415
+#define CTL_REG_EFLOCON 0x417
+#define CTL_REG_EPAUSL 0x418
+#define CTL_REG_EPAUSH 0x419
+
+/* PHY Register */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHSTAT1 0x01
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHSTAT2 0x11
+#define PHY_REG_PHLCON 0x14
+
+/* Receive Filter Register (ERXFCON) bits */
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/* ECON1 Register Bits */
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/* ECON2 Register Bits */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/* EIR Register Bits */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/* ESTAT Register Bits */
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/* EIE Register Bits */
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/* MACON1 Register Bits */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+/* MACON2 Register Bits */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/* MACON3 Register Bits */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/* MACON4 Register Bits */
+#define ENC_MACON4_DEFER 0x40
+
+/* MICMD Register Bits */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/* MISTAT Register Bits */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/* PHID1 and PHID2 values */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+/* PHCON1 values */
+#define ENC_PHCON1_PDPXMD 0x0100
+
+/* PHSTAT1 values */
+#define ENC_PHSTAT1_LLSTAT 0x0004
+
+/* PHSTAT2 values */
+#define ENC_PHSTAT2_LSTAT 0x0400
+#define ENC_PHSTAT2_DPXSTAT 0x0200
+
+#endif
diff --git a/drivers/net/enc28j60_lpc2292.c b/drivers/net/enc28j60_lpc2292.c
new file mode 100644
index 0000000..bf95052
--- /dev/null
+++ b/drivers/net/enc28j60_lpc2292.c
@@ -0,0 +1,983 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#warning This driver is depreciated. Please update to new SPI framework enc28j60 driver
+#include <config.h>
+#include <common.h>
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spi.h>
+
+/*
+ * Control Registers in Bank 0
+ */
+
+#define CTL_REG_ERDPTL 0x00
+#define CTL_REG_ERDPTH 0x01
+#define CTL_REG_EWRPTL 0x02
+#define CTL_REG_EWRPTH 0x03
+#define CTL_REG_ETXSTL 0x04
+#define CTL_REG_ETXSTH 0x05
+#define CTL_REG_ETXNDL 0x06
+#define CTL_REG_ETXNDH 0x07
+#define CTL_REG_ERXSTL 0x08
+#define CTL_REG_ERXSTH 0x09
+#define CTL_REG_ERXNDL 0x0A
+#define CTL_REG_ERXNDH 0x0B
+#define CTL_REG_ERXRDPTL 0x0C
+#define CTL_REG_ERXRDPTH 0x0D
+#define CTL_REG_ERXWRPTL 0x0E
+#define CTL_REG_ERXWRPTH 0x0F
+#define CTL_REG_EDMASTL 0x10
+#define CTL_REG_EDMASTH 0x11
+#define CTL_REG_EDMANDL 0x12
+#define CTL_REG_EDMANDH 0x13
+#define CTL_REG_EDMADSTL 0x14
+#define CTL_REG_EDMADSTH 0x15
+#define CTL_REG_EDMACSL 0x16
+#define CTL_REG_EDMACSH 0x17
+/* these are common in all banks */
+#define CTL_REG_EIE 0x1B
+#define CTL_REG_EIR 0x1C
+#define CTL_REG_ESTAT 0x1D
+#define CTL_REG_ECON2 0x1E
+#define CTL_REG_ECON1 0x1F
+
+/*
+ * Control Registers in Bank 1
+ */
+
+#define CTL_REG_EHT0 0x00
+#define CTL_REG_EHT1 0x01
+#define CTL_REG_EHT2 0x02
+#define CTL_REG_EHT3 0x03
+#define CTL_REG_EHT4 0x04
+#define CTL_REG_EHT5 0x05
+#define CTL_REG_EHT6 0x06
+#define CTL_REG_EHT7 0x07
+#define CTL_REG_EPMM0 0x08
+#define CTL_REG_EPMM1 0x09
+#define CTL_REG_EPMM2 0x0A
+#define CTL_REG_EPMM3 0x0B
+#define CTL_REG_EPMM4 0x0C
+#define CTL_REG_EPMM5 0x0D
+#define CTL_REG_EPMM6 0x0E
+#define CTL_REG_EPMM7 0x0F
+#define CTL_REG_EPMCSL 0x10
+#define CTL_REG_EPMCSH 0x11
+#define CTL_REG_EPMOL 0x14
+#define CTL_REG_EPMOH 0x15
+#define CTL_REG_EWOLIE 0x16
+#define CTL_REG_EWOLIR 0x17
+#define CTL_REG_ERXFCON 0x18
+#define CTL_REG_EPKTCNT 0x19
+
+/*
+ * Control Registers in Bank 2
+ */
+
+#define CTL_REG_MACON1 0x00
+#define CTL_REG_MACON2 0x01
+#define CTL_REG_MACON3 0x02
+#define CTL_REG_MACON4 0x03
+#define CTL_REG_MABBIPG 0x04
+#define CTL_REG_MAIPGL 0x06
+#define CTL_REG_MAIPGH 0x07
+#define CTL_REG_MACLCON1 0x08
+#define CTL_REG_MACLCON2 0x09
+#define CTL_REG_MAMXFLL 0x0A
+#define CTL_REG_MAMXFLH 0x0B
+#define CTL_REG_MAPHSUP 0x0D
+#define CTL_REG_MICON 0x11
+#define CTL_REG_MICMD 0x12
+#define CTL_REG_MIREGADR 0x14
+#define CTL_REG_MIWRL 0x16
+#define CTL_REG_MIWRH 0x17
+#define CTL_REG_MIRDL 0x18
+#define CTL_REG_MIRDH 0x19
+
+/*
+ * Control Registers in Bank 3
+ */
+
+#define CTL_REG_MAADR1 0x00
+#define CTL_REG_MAADR0 0x01
+#define CTL_REG_MAADR3 0x02
+#define CTL_REG_MAADR2 0x03
+#define CTL_REG_MAADR5 0x04
+#define CTL_REG_MAADR4 0x05
+#define CTL_REG_EBSTSD 0x06
+#define CTL_REG_EBSTCON 0x07
+#define CTL_REG_EBSTCSL 0x08
+#define CTL_REG_EBSTCSH 0x09
+#define CTL_REG_MISTAT 0x0A
+#define CTL_REG_EREVID 0x12
+#define CTL_REG_ECOCON 0x15
+#define CTL_REG_EFLOCON 0x17
+#define CTL_REG_EPAUSL 0x18
+#define CTL_REG_EPAUSH 0x19
+
+
+/*
+ * PHY Register
+ */
+
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+/* taken from the Linux driver */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHLCON 0x14
+
+/*
+ * Receive Filter Register (ERXFCON) bits
+ */
+
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/*
+ * ECON1 Register Bits
+ */
+
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/*
+ * ECON2 Register Bits
+ */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/*
+ * EIR Register Bits
+ */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/*
+ * ESTAT Register Bits
+ */
+
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/*
+ * EIE Register Bits
+ */
+
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/*
+ * MACON1 Register Bits
+ */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+
+/*
+ * MACON2 Register Bits
+ */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/*
+ * MACON3 Register Bits
+ */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/*
+ * MICMD Register Bits
+ */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/*
+ * MISTAT Register Bits
+ */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/*
+ * PHID1 and PHID2 values
+ */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+
+#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
+#define ENC_RESET 0x00020000 /* pin P1.17 */
+
+#define FAILSAFE_VALUE 5000
+
+/*
+ * Controller memory layout:
+ *
+ * 0x0000 - 0x17ff 6k bytes receive buffer
+ * 0x1800 - 0x1fff 2k bytes transmit buffer
+ */
+/* Use the lower memory for receiver buffer. See errata pt. 5 */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_TX_BUF_START 0x1800
+/* taken from the Linux driver */
+#define ENC_RX_BUF_END 0x17ff
+#define ENC_TX_BUF_END 0x1fff
+
+/* maximum frame length */
+#define ENC_MAX_FRM_LEN 1518
+
+#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
+#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
+#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
+
+
+static unsigned char encReadReg (unsigned char regNo);
+static void encWriteReg (unsigned char regNo, unsigned char data);
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
+static void encReadBuff (unsigned short length, unsigned char *pBuff);
+static void encWriteBuff (unsigned short length, unsigned char *pBuff);
+static void encBitSet (unsigned char regNo, unsigned char data);
+static void encBitClr (unsigned char regNo, unsigned char data);
+static void encReset (void);
+static void encInit (unsigned char *pEthAddr);
+static unsigned short phyRead (unsigned char addr);
+static void phyWrite(unsigned char, unsigned short);
+static void encPoll (void);
+static void encRx (void);
+
+#define m_nic_read(reg) encReadReg(reg)
+#define m_nic_write(reg, data) encWriteReg(reg, data)
+#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
+#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
+#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
+
+/* bit field set */
+#define m_nic_bfs(reg, data) encBitSet(reg, data)
+
+/* bit field clear */
+#define m_nic_bfc(reg, data) encBitClr(reg, data)
+
+static unsigned char bank = 0; /* current bank in enc28j60 */
+static unsigned char next_pointer_lsb;
+static unsigned char next_pointer_msb;
+
+static unsigned char buffer[ENC_MAX_FRM_LEN];
+static int rxResetCounter = 0;
+
+#define RX_RESET_COUNTER 1000;
+
+/*-----------------------------------------------------------------------------
+ * Always returns 0
+ */
+int eth_init (bd_t * bis)
+{
+ unsigned char estatVal;
+ uchar enetaddr[6];
+
+ /* configure GPIO */
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
+
+ /* CS and RESET active low */
+ PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
+ PUT32 (IO1SET, ENC_RESET);
+
+ spi_init ();
+
+ /* taken from the Linux driver - dangerous stuff here! */
+ /* Wait for CLKRDY to become set (i.e., check that we can communicate with
+ the ENC) */
+ do
+ {
+ estatVal = m_nic_read(CTL_REG_ESTAT);
+ } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
+
+ /* initialize controller */
+ encReset ();
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ encInit (enetaddr);
+
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+
+ return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ /* check frame length, etc. */
+ /* TODO: */
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /* set EWRPT */
+ m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
+ m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+
+ /* set ETXND */
+ m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+ m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
+ /* set ETXST */
+ m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
+ m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
+
+ /* write packet */
+ m_nic_write_data (length, (unsigned char *) packet);
+
+ /* taken from the Linux driver */
+ /* Verify that the internal transmit logic has not been altered by excessive
+ collisions. See Errata B4 12 and 14.
+ */
+ if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+
+ /* set ECON1.TXRTS */
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ * This function resets the receiver only. This function may be called from
+ * interrupt-context.
+ */
+static void encReceiverReset (void)
+{
+ unsigned char econ1;
+
+ econ1 = m_nic_read (CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ rxResetCounter = RX_RESET_COUNTER;
+ }
+}
+
+/*****************************************************************************
+ * receiver reset timer
+ */
+static void encReceiverResetCallback (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+}
+
+/*-----------------------------------------------------------------------------
+ * Check for received packets. Call NetReceive for each packet. The return
+ * value is ignored by the caller.
+ */
+int eth_rx (void)
+{
+ if (rxResetCounter > 0 && --rxResetCounter == 0) {
+ encReceiverResetCallback ();
+ }
+
+ encPoll ();
+
+ return 0;
+}
+
+void eth_halt (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+}
+
+/*****************************************************************************/
+
+static void encPoll (void)
+{
+ unsigned char eir_reg;
+ volatile unsigned char estat_reg;
+ unsigned char pkt_cnt;
+
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = m_nic_read (CTL_REG_ESTAT);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ }
+
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ }
+ encRx ();
+ /* clear PKTIF bit in EIR, this should not need to be done but it
+ seems like we get problems if we do not */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ }
+
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf ("encPoll: rx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
+ }
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf ("encPoll: tx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
+ }
+
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+static void encRx (void)
+{
+ unsigned short pkt_len;
+ unsigned short copy_len;
+ unsigned short status;
+ unsigned char eir_reg;
+ unsigned char pkt_cnt = 0;
+ unsigned short rxbuf_rdpt;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ do {
+ m_nic_read_data (6, buffer);
+ next_pointer_lsb = buffer[0];
+ next_pointer_msb = buffer[1];
+ pkt_len = buffer[2];
+ pkt_len |= (unsigned short) buffer[3] << 8;
+ status = buffer[4];
+ status |= (unsigned short) buffer[5] << 8;
+
+ if (pkt_len <= ENC_MAX_FRM_LEN)
+ copy_len = pkt_len;
+ else
+ copy_len = 0;
+
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
+ copy_len = 0;
+
+ /* taken from the Linux driver */
+ /* check if next pointer is resonable */
+ if ((((unsigned int)next_pointer_msb << 8) |
+ (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ copy_len = 0;
+
+ if (copy_len > 0) {
+ m_nic_read_data (copy_len, buffer);
+ }
+
+ /* advance read pointer to next pointer */
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ /* decrease packet counter */
+ m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+
+ /* taken from the Linux driver */
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
+ m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
+ (m_nic_read(CTL_REG_ERXNDH) << 8 |
+ m_nic_read(CTL_REG_ERXNDL)))) {
+ m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
+ m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ } else {
+ m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
+ m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ }
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1,
+ (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ if (copy_len == 0) {
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ encReceiverReset ();
+ printf ("eth_rx: copy_len=0\n");
+ continue;
+ }
+
+ NetReceive ((unsigned char *) buffer, pkt_len);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+}
+
+static void encWriteReg (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+{
+ unsigned char readback;
+ int i;
+
+ spi_lock ();
+
+ for (i = 0; i < c; i++) {
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+
+ spi_unlock (); /* we must unlock spi first */
+
+ readback = encReadReg (regNo);
+
+ spi_lock ();
+
+ if (readback == data)
+ break;
+ }
+ spi_unlock ();
+
+ if (i == c) {
+ printf ("enc28j60: write reg %d failed\n", regNo);
+ }
+}
+
+static unsigned char encReadReg (unsigned char regNo)
+{
+ unsigned char rxByte;
+
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x1f); /* read reg 0x1f */
+
+ bank = spi_read () & 0x3;
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (regNo);
+ rxByte = spi_read ();
+
+ /* check if MAC or MII register */
+ if (((bank == 2) && (regNo <= 0x1a)) ||
+ ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
+ /* ignore first byte and read another byte */
+ rxByte = spi_read ();
+ }
+
+ enc_disable ();
+ spi_unlock ();
+
+ return rxByte;
+}
+
+static void encReadBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x20 | 0x1a); /* read buffer memory */
+
+ while (length--) {
+ if (pBuff != NULL)
+ *pBuff++ = spi_read ();
+ else
+ spi_write (0);
+ }
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x60 | 0x1a); /* write buffer memory */
+
+ spi_write (0x00); /* control byte */
+
+ while (length--)
+ spi_write (*pBuff++);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitSet (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x80 | regNo); /* bit field set */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitClr (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xA0 | regNo); /* bit field clear */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encReset (void)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xff); /* soft reset */
+
+ enc_disable ();
+ spi_unlock ();
+
+ /* sleep 1 ms. See errata pt. 2 */
+ udelay (1000);
+}
+
+static void encInit (unsigned char *pEthAddr)
+{
+ unsigned short phid1 = 0;
+ unsigned short phid2 = 0;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /*
+ * Setup the buffer space. The reset values are valid for the
+ * other pointers.
+ */
+ /* We shall not write to ERXST, see errata pt. 5. Instead we
+ have to make sure that ENC_RX_BUS_START is 0. */
+ m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
+
+ /* taken from the Linux driver */
+ m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
+
+ m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+ next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
+ next_pointer_msb = (ENC_RX_BUF_START >> 8);
+
+ /* verify identification */
+ phid1 = phyRead (PHY_REG_PHID1);
+ phid2 = phyRead (PHY_REG_PHID2);
+
+ if (phid1 != ENC_PHID1_VALUE
+ || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
+ printf ("ERROR: failed to identify controller\n");
+ printf ("phid1 = %x, phid2 = %x\n",
+ phid1, (phid2 & ENC_PHID2_MASK));
+ printf ("should be phid1 = %x, phid2 = %x\n",
+ ENC_PHID1_VALUE, ENC_PHID2_VALUE);
+ }
+
+ /*
+ * --- MAC Initialization ---
+ */
+
+ /* Pull MAC out of Reset */
+
+ /* switch to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* enable MAC to receive frames */
+ /* added some bits from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
+
+ /* configure pad, tx-crc and duplex */
+ /* added a bit from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
+
+ /* added 4 new lines from the Linux driver */
+ /* Allow infinite deferals if the medium is continously busy */
+ m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+
+ /* Late collisions occur beyond 63 bytes */
+ m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+
+ /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+ m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+ * 0x0c for half-duplex. Nothing for full-duplex
+ */
+ m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+
+ /* set maximum frame length */
+ m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
+ m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+
+ /*
+ * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * and 0x15 for full duplex.
+ */
+ m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+
+ /* set MAC address */
+
+ /* switch to bank 3 */
+ m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+
+ m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
+ m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
+ m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
+ m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
+ m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
+ m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+
+ /*
+ * PHY Initialization taken from the Linux driver
+ */
+
+ /* Prevent automatic loopback of data beeing transmitted by setting
+ ENC_PHCON2_HDLDIS */
+ phyWrite(PHY_REG_PHCON2, (1<<8));
+
+ /* LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phyWrite(PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phyWrite(PHY_REG_PHCON1, 0);
+
+ /*
+ * Receive settings
+ */
+
+#ifdef CONFIG_USE_IRQ
+ /* enable interrupts */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+/*****************************************************************************
+ *
+ * Description:
+ * Read PHY registers.
+ *
+ * NOTE! This function will change to Bank 2.
+ *
+ * Params:
+ * [in] addr address of the register to read
+ *
+ * Returns:
+ * The value in the register
+ */
+static unsigned short phyRead (unsigned char addr)
+{
+ unsigned short ret = 0;
+
+ /* move to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write (CTL_REG_MIREGADR, addr);
+
+ /* set MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+
+ /* taken from the Linux driver */
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if (cnt++ >= 1000) {
+ /* GJ - this seems extremely dangerous! */
+ /* printf("#"); */
+ cnt = 0;
+ }
+ }
+
+ /* taken from the Linux driver */
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* clear MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, 0);
+
+ ret = (m_nic_read (CTL_REG_MIRDH) << 8);
+ ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+
+ return ret;
+}
+
+/*****************************************************************************
+ *
+ * Taken from the Linux driver.
+ * Description:
+ * Write PHY registers.
+ *
+ * NOTE! This function will change to Bank 3.
+ *
+ * Params:
+ * [in] addr address of the register to write to
+ * [in] data to be written
+ *
+ * Returns:
+ * None
+ */
+static void phyWrite(unsigned char addr, unsigned short data)
+{
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write(CTL_REG_MIREGADR, addr);
+
+ m_nic_write(CTL_REG_MIWRL, data & 0xff);
+ m_nic_write(CTL_REG_MIWRH, data >> 8);
+
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if(cnt++ >= 1000) {
+ cnt = 0;
+ }
+ }
+}
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index c88e596..bc8c922 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -250,6 +250,13 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
mpc5xxx_fec_init_phy(dev, bis);
/*
+ * Call board-specific PHY fixups (if any)
+ */
+#ifdef CONFIG_RESET_PHY_R
+ reset_phy();
+#endif
+
+ /*
* Initialize RxBD/TxBD rings
*/
mpc5xxx_fec_rbd_init(fec);
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index 54a1bfb..ba9c67e 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -654,6 +654,28 @@ again:
return length;
}
+static int smc_write_hwaddr(struct eth_device *dev)
+{
+ int i;
+
+ swap_to(ETHERNET);
+ SMC_SELECT_BANK (dev, 1);
+#ifdef USE_32_BIT
+ for (i = 0; i < 6; i += 2) {
+ word address;
+
+ address = dev->enetaddr[i + 1] << 8;
+ address |= dev->enetaddr[i];
+ SMC_outw(dev, address, (ADDR0_REG + i));
+ }
+#else
+ for (i = 0; i < 6; i++)
+ SMC_outb(dev, dev->enetaddr[i], (ADDR0_REG + i));
+#endif
+ swap_to(FLASH);
+ return 0;
+}
+
/*
* Open and Initialize the board
*
@@ -662,8 +684,6 @@ again:
*/
static int smc_init(struct eth_device *dev, bd_t *bd)
{
- int i;
-
swap_to(ETHERNET);
PRINTK2 ("%s: smc_init\n", SMC_DEV_NAME);
@@ -680,20 +700,6 @@ static int smc_init(struct eth_device *dev, bd_t *bd)
/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
/* SMC_SELECT_BANK(dev, 0); */
/* SMC_outw(dev, 0, RPC_REG); */
- SMC_SELECT_BANK (dev, 1);
-
-#ifdef USE_32_BIT
- for (i = 0; i < 6; i += 2) {
- word address;
-
- address = dev->enetaddr[i + 1] << 8;
- address |= dev->enetaddr[i];
- SMC_outw(dev, address, (ADDR0_REG + i));
- }
-#else
- for (i = 0; i < 6; i++)
- SMC_outb(dev, dev->enetaddr[i], (ADDR0_REG + i));
-#endif
printf(SMC_DEV_NAME ": MAC %pM\n", dev->enetaddr);
@@ -1360,6 +1366,7 @@ int smc91111_initialize(u8 dev_num, int base_addr)
return 0;
}
+ memset(dev, 0, sizeof(*dev));
priv->dev_num = dev_num;
dev->priv = priv;
dev->iobase = base_addr;
@@ -1374,6 +1381,7 @@ int smc91111_initialize(u8 dev_num, int base_addr)
dev->halt = smc_halt;
dev->send = smc_send;
dev->recv = smc_rcv;
+ dev->write_hwaddr = smc_write_hwaddr;
sprintf(dev->name, "%s-%hu", SMC_DEV_NAME, dev_num);
eth_register(dev);
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 0820daa..76af939 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <net.h>
#include <config.h>
+#include <malloc.h>
#include <asm/io.h>
#undef DEBUG
@@ -63,26 +64,19 @@
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
typedef struct {
- unsigned int baseaddress; /* Base address for device (IPIF) */
- unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
- unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
- unsigned char deviceid; /* Unique ID of device - for future */
+ u32 baseaddress; /* Base address for device (IPIF) */
+ u32 nexttxbuffertouse; /* Next TX buffer to write to */
+ u32 nextrxbuffertouse; /* Next RX buffer to read from */
+ uchar deviceid; /* Unique ID of device - for future */
} xemaclite;
static xemaclite emaclite;
static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
-/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CONFIG_ENV_IS_NOWHERE
-static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-#else
-static u8 emacaddr[ENET_ADDR_LENGTH];
-#endif
-
-void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
+static void xemaclite_alignedread (u32 *srcptr, void *destptr, u32 bytecount)
{
- unsigned int i;
+ u32 i;
u32 alignbuffer;
u32 *to32ptr;
u32 *from32ptr;
@@ -107,9 +101,9 @@ void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
}
}
-void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
+static void xemaclite_alignedwrite (void *srcptr, u32 destptr, u32 bytecount)
{
- unsigned i;
+ u32 i;
u32 alignbuffer;
u32 *to32ptr = (u32 *) destptr;
u32 *from32ptr;
@@ -134,23 +128,16 @@ void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
*to32ptr++ = alignbuffer;
}
-void eth_halt (void)
+static void emaclite_halt(struct eth_device *dev)
{
debug ("eth_halt\n");
}
-int eth_init (bd_t * bis)
+static int emaclite_init(struct eth_device *dev, bd_t *bis)
{
- uchar enetaddr[6];
-
debug ("EmacLite Initialization Started\n");
memset (&emaclite, 0, sizeof (xemaclite));
- emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- memcpy(enetaddr, emacaddr, ENET_ADDR_LENGTH);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
+ emaclite.baseaddress = dev->iobase;
/*
* TX - TX_PING & TX_PONG initialization
@@ -158,7 +145,7 @@ int eth_init (bd_t * bis)
/* Restart PING TX */
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
/* Copy MAC address */
- xemaclite_alignedwrite (enetaddr,
+ xemaclite_alignedwrite (dev->enetaddr,
emaclite.baseaddress, ENET_ADDR_LENGTH);
/* Set the length */
out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
@@ -171,7 +158,7 @@ int eth_init (bd_t * bis)
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
/* The same operation with PONG TX */
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
- xemaclite_alignedwrite (enetaddr, emaclite.baseaddress +
+ xemaclite_alignedwrite (dev->enetaddr, emaclite.baseaddress +
XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
@@ -194,7 +181,7 @@ int eth_init (bd_t * bis)
return 0;
}
-int xemaclite_txbufferavailable (xemaclite * instanceptr)
+static int xemaclite_txbufferavailable (xemaclite *instanceptr)
{
u32 reg;
u32 txpingbusy;
@@ -216,12 +203,12 @@ int xemaclite_txbufferavailable (xemaclite * instanceptr)
return (!(txpingbusy && txpongbusy));
}
-int eth_send (volatile void *ptr, int len) {
-
- unsigned int reg;
- unsigned int baseaddress;
+static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
+{
+ u32 reg;
+ u32 baseaddress;
- unsigned maxtry = 1000;
+ u32 maxtry = 1000;
if (len > ENET_MAX_MTU)
len = ENET_MAX_MTU;
@@ -293,11 +280,11 @@ int eth_send (volatile void *ptr, int len) {
return 0;
}
-int eth_rx (void)
+static int emaclite_recv(struct eth_device *dev)
{
- unsigned int length;
- unsigned int reg;
- unsigned int baseaddress;
+ u32 length;
+ u32 reg;
+ u32 baseaddress;
baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
@@ -322,7 +309,7 @@ int eth_rx (void)
#endif
}
/* Get the length of the frame that arrived */
- switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
+ switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
0xFFFF0000 ) >> 16) {
case 0x806:
length = 42 + 20; /* FIXME size of ARP */
@@ -330,7 +317,7 @@ int eth_rx (void)
break;
case 0x800:
length = 14 + 14 +
- (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
+ (((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10))) &
0xFFFF0000) >> 16); /* FIXME size of IP packet */
debug ("IP Packet\n");
break;
@@ -353,3 +340,26 @@ int eth_rx (void)
return 1;
}
+
+int xilinx_emaclite_initialize (bd_t *bis, int base_addr)
+{
+ struct eth_device *dev;
+
+ dev = malloc(sizeof(*dev));
+ if (dev == NULL)
+ hang();
+
+ memset(dev, 0, sizeof(*dev));
+ sprintf(dev->name, "Xilinx_Emaclite");
+
+ dev->iobase = base_addr;
+ dev->priv = 0;
+ dev->init = emaclite_init;
+ dev->halt = emaclite_halt;
+ dev->send = emaclite_send;
+ dev->recv = emaclite_recv;
+
+ eth_register(dev);
+
+ return 0;
+}