summaryrefslogtreecommitdiff
path: root/drivers/net/tsec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tsec.c')
-rw-r--r--drivers/net/tsec.c941
1 files changed, 511 insertions, 430 deletions
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index d8b6619..fd49eff 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -48,14 +48,15 @@ static int tsec_send(struct eth_device *dev,
volatile void *packet, int length);
static int tsec_recv(struct eth_device *dev);
static int tsec_init(struct eth_device *dev, bd_t * bd);
+static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
static void tsec_halt(struct eth_device *dev);
static void init_registers(volatile tsec_t * regs);
static void startup_tsec(struct eth_device *dev);
static int init_phy(struct eth_device *dev);
void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
uint read_phy_reg(struct tsec_private *priv, uint regnum);
-struct phy_info *get_phy_info(struct eth_device *dev);
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
+static struct phy_info *get_phy_info(struct eth_device *dev);
+static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
static void adjust_link(struct eth_device *dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
&& !defined(BITBANGMII)
@@ -112,7 +113,7 @@ int tsec_standard_init(bd_t *bis)
/* Initialize device structure. Returns success if PHY
* initialization succeeded (i.e. if it recognizes the PHY)
*/
-int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
+static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
{
struct eth_device *dev;
int i;
@@ -174,7 +175,7 @@ int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
* that it returns success if the link is up, failure otherwise.
* This allows u-boot to find the first active controller.
*/
-int tsec_init(struct eth_device *dev, bd_t * bd)
+static int tsec_init(struct eth_device *dev, bd_t * bd)
{
uint tempval;
char tmpbuf[MAC_ADDR_LEN];
@@ -235,7 +236,8 @@ static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
/* Provide the default behavior of writing the PHY of this ethernet device */
-#define write_phy_reg(priv, regnum, value) tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
+#define write_phy_reg(priv, regnum, value) \
+ tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
/* Reads register regnum on the device's PHY through the
* specified registers. It lowers and raises the read
@@ -243,7 +245,8 @@ static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
* notvalid bit cleared), and the bus to cease activity (miimind
* busy bit cleared), and then returns the value
*/
-uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, uint phyid, uint regnum)
+static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs,
+ uint phyid, uint regnum)
{
uint value;
@@ -269,7 +272,8 @@ uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, uint phyid, uint regnum
}
/* #define to provide old read_phy_reg functionality without duplicating code */
-#define read_phy_reg(priv,regnum) tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum)
+#define read_phy_reg(priv,regnum) \
+ tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum)
#define TBIANA_SETTINGS ( \
TBIANA_ASYMMETRIC_PAUSE \
@@ -277,17 +281,18 @@ uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, uint phyid, uint regnum
| TBIANA_FULL_DUPLEX \
)
+/* Force the TBI PHY into 1000Mbps full duplex when in SGMII mode */
#define TBICR_SETTINGS ( \
TBICR_PHY_RESET \
- | TBICR_ANEG_ENABLE \
| TBICR_FULL_DUPLEX \
| TBICR_SPEED1_SET \
)
+
/* Configure the TBI for SGMII operation */
static void tsec_configure_serdes(struct tsec_private *priv)
{
- /* Access TBI PHY registers at given TSEC register offset as opposed to the
- * register offset used for external PHY accesses */
+ /* Access TBI PHY registers at given TSEC register offset as opposed
+ * to the register offset used for external PHY accesses */
tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA,
TBIANA_SETTINGS);
tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
@@ -342,7 +347,7 @@ static int init_phy(struct eth_device *dev)
* Returns which value to write to the control register.
* For 10/100, the value is slightly different
*/
-uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
+static uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
{
if (priv->flags & TSEC_GIGABIT)
return MIIM_CONTROL_INIT;
@@ -353,7 +358,7 @@ uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
/*
* Wait for auto-negotiation to complete, then determine link
*/
-uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
{
/*
* Wait if the link is up, and autonegotiation is in progress
@@ -407,7 +412,7 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
*
* Stolen from Linux's mii.c and phy_device.c
*/
-uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
{
/* We're using autonegotiation */
if (mii_reg & PHY_BMSR_AUTN_ABLE) {
@@ -476,7 +481,7 @@ uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
* link. "Ethernet@Wirespeed" reduces advertised speed until link
* can be achieved.
*/
-uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
+static uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
{
return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010;
}
@@ -485,61 +490,150 @@ uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
* Parse the BCM54xx status register for speed and duplex information.
* The linux sungem_phy has this information, but in a table format.
*/
-uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
{
+ /* If there is no link, speed and duplex don't matter */
+ if (!priv->link)
+ return 0;
- switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){
+ switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
+ MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
+ case 1:
+ priv->duplexity = 0;
+ priv->speed = 10;
+ break;
+ case 2:
+ priv->duplexity = 1;
+ priv->speed = 10;
+ break;
+ case 3:
+ priv->duplexity = 0;
+ priv->speed = 100;
+ break;
+ case 5:
+ priv->duplexity = 1;
+ priv->speed = 100;
+ break;
+ case 6:
+ priv->duplexity = 0;
+ priv->speed = 1000;
+ break;
+ case 7:
+ priv->duplexity = 1;
+ priv->speed = 1000;
+ break;
+ default:
+ printf("Auto-neg error, defaulting to 10BT/HD\n");
+ priv->duplexity = 0;
+ priv->speed = 10;
+ break;
+ }
- case 1:
- printf("Enet starting in 10BT/HD\n");
- priv->duplexity = 0;
- priv->speed = 10;
- break;
+ return 0;
+}
- case 2:
- printf("Enet starting in 10BT/FD\n");
- priv->duplexity = 1;
- priv->speed = 10;
- break;
+/*
+ * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
+ * 0x42 - "Operating Mode Status Register"
+ */
+static int BCM8482_is_serdes(struct tsec_private *priv)
+{
+ u16 val;
+ int serdes = 0;
+
+ write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_ER | 0x42);
+ val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
+
+ switch (val & 0x1f) {
+ case 0x0d: /* RGMII-to-100Base-FX */
+ case 0x0e: /* RGMII-to-SGMII */
+ case 0x0f: /* RGMII-to-SerDes */
+ case 0x12: /* SGMII-to-SerDes */
+ case 0x13: /* SGMII-to-100Base-FX */
+ case 0x16: /* SerDes-to-Serdes */
+ serdes = 1;
+ break;
+ case 0x6: /* RGMII-to-Copper */
+ case 0x14: /* SGMII-to-Copper */
+ case 0x17: /* SerDes-to-Copper */
+ break;
+ default:
+ printf("ERROR, invalid PHY mode (0x%x\n)", val);
+ break;
+ }
- case 3:
- printf("Enet starting in 100BT/HD\n");
- priv->duplexity = 0;
- priv->speed = 100;
- break;
+ return serdes;
+}
- case 5:
- printf("Enet starting in 100BT/FD\n");
- priv->duplexity = 1;
- priv->speed = 100;
- break;
+/*
+ * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
+ * Mode Status Register"
+ */
+uint mii_parse_BCM5482_serdes_sr(struct tsec_private *priv)
+{
+ u16 val;
+ int i = 0;
- case 6:
- printf("Enet starting in 1000BT/HD\n");
- priv->duplexity = 0;
- priv->speed = 1000;
- break;
+ /* Wait 1s for link - Clause 37 autonegotiation happens very fast */
+ while (1) {
+ write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_ER | 0x42);
+ val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
- case 7:
- printf("Enet starting in 1000BT/FD\n");
- priv->duplexity = 1;
- priv->speed = 1000;
+ if (val & 0x8000)
break;
- default:
- printf("Auto-neg error, defaulting to 10BT/HD\n");
- priv->duplexity = 0;
- priv->speed = 10;
- break;
+ if (i++ > 1000) {
+ priv->link = 0;
+ return 1;
+ }
+
+ udelay(1000); /* 1 ms */
}
+ priv->link = 1;
+ switch ((val >> 13) & 0x3) {
+ case (0x00):
+ priv->speed = 10;
+ break;
+ case (0x01):
+ priv->speed = 100;
+ break;
+ case (0x02):
+ priv->speed = 1000;
+ break;
+ }
+
+ priv->duplexity = (val & 0x1000) == 0x1000;
+
return 0;
+}
+
+/*
+ * Figure out if BCM5482 is in serdes or copper mode and determine link
+ * configuration accordingly
+ */
+static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv)
+{
+ if (BCM8482_is_serdes(priv)) {
+ mii_parse_BCM5482_serdes_sr(priv);
+ priv->flags |= TSEC_FIBER;
+ } else {
+ /* Wait for auto-negotiation to complete or fail */
+ mii_parse_sr(mii_reg, priv);
+ /* Parse BCM54xx copper aux status register */
+ mii_reg = read_phy_reg(priv, MIIM_BCM54xx_AUXSTATUS);
+ mii_parse_BCM54xx_sr(mii_reg, priv);
+ }
+
+ return 0;
}
+
/* Parse the 88E1011's status register for speed and duplex
* information
*/
-uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -597,7 +691,7 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
/* Parse the RTL8211B's status register for speed and duplex
* information
*/
-uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -655,7 +749,7 @@ uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
/* Parse the cis8201's status register for speed and duplex
* information
*/
-uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -683,7 +777,7 @@ uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
/* Parse the vsc8244's status register for speed and duplex
* information
*/
-uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -711,7 +805,7 @@ uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
/* Parse the DM9161's status register for speed and duplex
* information
*/
-uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
{
if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
priv->speed = 100;
@@ -729,7 +823,7 @@ uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
/*
* Hack to write all 4 PHYs with the LED values
*/
-uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
+static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
{
uint phyid;
volatile tsec_mdio_t *regbase = priv->phyregs;
@@ -747,7 +841,7 @@ uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
return MIIM_CIS8204_SLEDCON_INIT;
}
-uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
+static uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
{
if (priv->flags & TSEC_REDUCED)
return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
@@ -755,7 +849,7 @@ uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
return MIIM_CIS8204_EPHYCON_INIT;
}
-uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
+static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
{
uint mii_data = read_phy_reg(priv, mii_reg);
@@ -847,8 +941,9 @@ static void adjust_link(struct eth_device *dev)
break;
}
- printf("Speed: %d, %s duplex\n", priv->speed,
- (priv->duplexity) ? "full" : "half");
+ printf("Speed: %d, %s duplex%s\n", priv->speed,
+ (priv->duplexity) ? "full" : "half",
+ (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
} else {
printf("%s: No link.\n", dev->name);
@@ -996,11 +1091,11 @@ static void tsec_halt(struct eth_device *dev)
phy_run_commands(priv, priv->phyinfo->shutdown);
}
-struct phy_info phy_info_M88E1149S = {
+static struct phy_info phy_info_M88E1149S = {
0x1410ca,
"Marvell 88E1149S",
4,
- (struct phy_cmd[]){ /* config */
+ (struct phy_cmd[]) { /* config */
/* Reset and configure the PHY */
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
{0x1d, 0x1f, NULL},
@@ -1014,23 +1109,22 @@ struct phy_info phy_info_M88E1149S = {
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
{miim_end,}
},
- (struct phy_cmd[]){ /* startup */
+ (struct phy_cmd[]) { /* startup */
/* Status is read once to clear old link state */
{MIIM_STATUS, miim_read, NULL},
/* Auto-negotiate */
{MIIM_STATUS, miim_read, &mii_parse_sr},
/* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
+ {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
{miim_end,}
},
- (struct phy_cmd[]){ /* shutdown */
+ (struct phy_cmd[]) { /* shutdown */
{miim_end,}
},
};
/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
-struct phy_info phy_info_BCM5461S = {
+static struct phy_info phy_info_BCM5461S = {
0x02060c1, /* 5461 ID */
"Broadcom BCM5461S",
0, /* not clear to me what minor revisions we can shift away */
@@ -1057,7 +1151,7 @@ struct phy_info phy_info_BCM5461S = {
},
};
-struct phy_info phy_info_BCM5464S = {
+static struct phy_info phy_info_BCM5464S = {
0x02060b1, /* 5464 ID */
"Broadcom BCM5464S",
0, /* not clear to me what minor revisions we can shift away */
@@ -1084,7 +1178,7 @@ struct phy_info phy_info_BCM5464S = {
},
};
-struct phy_info phy_info_BCM5482S = {
+static struct phy_info phy_info_BCM5482S = {
0x0143bcb,
"Broadcom BCM5482S",
4,
@@ -1096,15 +1190,20 @@ struct phy_info phy_info_BCM5482S = {
/* Read Misc Control register and or in Ethernet@Wirespeed */
{MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed},
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ /* Initial config/enable of secondary SerDes interface */
+ {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf), NULL},
+ /* Write intial value to secondary SerDes Contol */
+ {MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_SSD | 0, NULL},
+ {MIIM_BCM54XX_EXP_DATA, MIIM_CONTROL_RESTART, NULL},
+ /* Enable copper/fiber auto-detect */
+ {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)},
{miim_end,}
},
(struct phy_cmd[]) { /* startup */
/* Status is read once to clear old link state */
{MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+ /* Determine copper/fiber, auto-negotiate, and read the result */
+ {MIIM_STATUS, miim_read, &mii_parse_BCM5482_sr},
{miim_end,}
},
(struct phy_cmd[]) { /* shutdown */
@@ -1112,74 +1211,72 @@ struct phy_info phy_info_BCM5482S = {
},
};
-struct phy_info phy_info_M88E1011S = {
+static struct phy_info phy_info_M88E1011S = {
0x01410c6,
"Marvell 88E1011S",
4,
- (struct phy_cmd[]){ /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_M88E1111S = {
+static struct phy_info phy_info_M88E1111S = {
0x01410cc,
"Marvell 88E1111S",
4,
- (struct phy_cmd[]){ /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1b, 0x848f, &mii_m88e1111s_setmode},
- {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1b, 0x848f, &mii_m88e1111s_setmode},
+ {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_M88E1118 = {
+static struct phy_info phy_info_M88E1118 = {
0x01410e1,
"Marvell 88E1118",
4,
- (struct phy_cmd[]){ /* config */
+ (struct phy_cmd[]) { /* config */
/* Reset and configure the PHY */
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
{0x16, 0x0002, NULL}, /* Change Page Number */
@@ -1192,8 +1289,8 @@ struct phy_info phy_info_M88E1118 = {
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
{miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
+ },
+ (struct phy_cmd[]) { /* startup */
{0x16, 0x0000, NULL}, /* Change Page Number */
/* Status is read once to clear old link state */
{MIIM_STATUS, miim_read, NULL},
@@ -1203,17 +1300,17 @@ struct phy_info phy_info_M88E1118 = {
{MIIM_88E1011_PHY_STATUS, miim_read,
&mii_parse_88E1011_psr},
{miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
+ },
+ (struct phy_cmd[]) { /* shutdown */
{miim_end,}
- },
+ },
};
/*
* Since to access LED register we need do switch the page, we
* do LED configuring in the miim_read-like function as follows
*/
-uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
+static uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
{
uint pg;
@@ -1230,34 +1327,33 @@ uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
return 0;
}
-struct phy_info phy_info_M88E1121R = {
+static struct phy_info phy_info_M88E1121R = {
0x01410cb,
"Marvell 88E1121R",
4,
- (struct phy_cmd[]){ /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- /* Configure leds */
- {MIIM_88E1121_PHY_LED_CTRL, miim_read,
- &mii_88E1121_set_led},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- /* Disable IRQs and de-assert interrupt */
- {MIIM_88E1121_PHY_IRQ_EN, 0, NULL},
- {MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_STATUS, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ /* Configure leds */
+ {MIIM_88E1121_PHY_LED_CTRL, miim_read, &mii_88E1121_set_led},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ /* Disable IRQs and de-assert interrupt */
+ {MIIM_88E1121_PHY_IRQ_EN, 0, NULL},
+ {MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_STATUS, miim_read, &mii_parse_link},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
@@ -1276,276 +1372,262 @@ static struct phy_info phy_info_M88E1145 = {
0x01410cd,
"Marvell 88E1145",
4,
- (struct phy_cmd[]){ /* config */
- /* Reset the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-
- /* Errata E0, E1 */
- {29, 0x001b, NULL},
- {30, 0x418f, NULL},
- {29, 0x0016, NULL},
- {30, 0xa2da, NULL},
-
- /* Configure the PHY */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO,
- NULL},
- {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_88E1111_PHY_LED_CONTROL,
- MIIM_88E1111_PHY_LED_DIRECT, NULL},
- /* Read the Status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Reset the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+
+ /* Errata E0, E1 */
+ {29, 0x001b, NULL},
+ {30, 0x418f, NULL},
+ {29, 0x0016, NULL},
+ {30, 0xa2da, NULL},
+
+ /* Configure the PHY */
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO, NULL},
+ {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_88E1111_PHY_LED_CONTROL, MIIM_88E1111_PHY_LED_DIRECT, NULL},
+ /* Read the Status */
+ {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_cis8204 = {
+static struct phy_info phy_info_cis8204 = {
0x3f11,
"Cicada Cis8204",
6,
- (struct phy_cmd[]){ /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT,
- MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
- &mii_cis8204_fixled},
- {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
- &mii_cis8204_setmode},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read,
- &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
+ &mii_cis8204_fixled},
+ {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
+ &mii_cis8204_setmode},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
/* Cicada 8201 */
-struct phy_info phy_info_cis8201 = {
+static struct phy_info phy_info_cis8201 = {
0xfc41,
"CIS8201",
4,
- (struct phy_cmd[]){ /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT,
- MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT,
- NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read,
- &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Set up the interface mode */
+ {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_VSC8211 = {
+
+static struct phy_info phy_info_VSC8211 = {
0xfc4b,
"Vitesse VSC8211",
4,
(struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT,
- MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1,
- MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Set up the interface mode */
+ {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
(struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read,
- &mii_parse_cis8201},
- {miim_end,}
- },
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
+ {miim_end,}
+ },
(struct phy_cmd[]) { /* shutdown */
- {miim_end,}
+ {miim_end,}
},
};
-struct phy_info phy_info_VSC8244 = {
+
+static struct phy_info phy_info_VSC8244 = {
0x3f1b,
"Vitesse VSC8244",
6,
- (struct phy_cmd[]){ /* config */
- /* Override PHY config settings */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read,
- &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_VSC8641 = {
+static struct phy_info phy_info_VSC8641 = {
0x7043,
"Vitesse VSC8641",
4,
- (struct phy_cmd[]){ /* config */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read,
- &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_VSC8221 = {
+static struct phy_info phy_info_VSC8221 = {
0xfc55,
"Vitesse VSC8221",
4,
- (struct phy_cmd[]){ /* config */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read,
- &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_VSC8601 = {
- 0x00007042,
- "Vitesse VSC8601",
- 4,
- (struct phy_cmd[]){ /* config */
- /* Override PHY config settings */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+static struct phy_info phy_info_VSC8601 = {
+ 0x00007042,
+ "Vitesse VSC8601",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
#ifdef CONFIG_SYS_VSC8601_SKEWFIX
- {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
+ {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
- {MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW (CONFIG_SYS_VSC8601_SKEW_TX<<14)|(CONFIG_SYS_VSC8601_SKEW_RX<<12)
- {MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
- {MIIM_EXT_PAGE_ACCESS,0,NULL},
+ {MIIM_EXT_PAGE_ACCESS,1,NULL},
+#define VSC8101_SKEW \
+ (CONFIG_SYS_VSC8601_SKEW_TX << 14) | (CONFIG_SYS_VSC8601_SKEW_RX << 12)
+ {MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
+ {MIIM_EXT_PAGE_ACCESS,0,NULL},
#endif
#endif
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read,
- &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-
-struct phy_info phy_info_dm9161 = {
+static struct phy_info phy_info_dm9161 = {
0x0181b88,
"Davicom DM9161E",
4,
- (struct phy_cmd[]){ /* config */
- {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
- /* Do not bypass the scrambler/descrambler */
- {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
- /* Clear 10BTCSR to default */
- {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT,
- NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CR_INIT, NULL},
- /* Restart Auto Negotiation */
- {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_DM9161_SCSR, miim_read,
- &mii_parse_dm9161_scsr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
+ /* Do not bypass the scrambler/descrambler */
+ {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
+ /* Clear 10BTCSR to default */
+ {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CR_INIT, NULL},
+ /* Restart Auto Negotiation */
+ {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
+
/* a generic flavor. */
-struct phy_info phy_info_generic = {
+static struct phy_info phy_info_generic = {
0,
"Unknown/Generic PHY",
32,
@@ -1565,8 +1647,7 @@ struct phy_info phy_info_generic = {
}
};
-
-uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
{
unsigned int speed;
if (priv->link) {
@@ -1601,26 +1682,26 @@ static struct phy_info phy_info_lxt971 = {
0x0001378e,
"LXT971",
4,
- (struct phy_cmd[]){ /* config */
- {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup - enable interrupts */
- /* { 0x12, 0x00f2, NULL }, */
- {MIIM_STATUS, miim_read, NULL},
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown - disable interrupts */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup - enable interrupts */
+ /* { 0x12, 0x00f2, NULL }, */
+ {MIIM_STATUS, miim_read, NULL},
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown - disable interrupts */
+ {miim_end,}
+ },
};
/* Parse the DP83865's link and auto-neg status register for speed and duplex
* information
*/
-uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
{
switch (mii_reg & MIIM_DP83865_SPD_MASK) {
@@ -1646,34 +1727,33 @@ uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
return 0;
}
-struct phy_info phy_info_dp83865 = {
+static struct phy_info phy_info_dp83865 = {
0x20005c7,
"NatSemi DP83865",
4,
- (struct phy_cmd[]){ /* config */
- {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the link and auto-neg status */
- {MIIM_DP83865_LANR, miim_read,
- &mii_parse_dp83865_lanr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]) { /* config */
+ {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the link and auto-neg status */
+ {MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
};
-struct phy_info phy_info_rtl8211b = {
+static struct phy_info phy_info_rtl8211b = {
0x001cc91,
"RealTek RTL8211B",
4,
- (struct phy_cmd[]){ /* config */
+ (struct phy_cmd[]) { /* config */
/* Reset and configure the PHY */
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
@@ -1682,7 +1762,7 @@ struct phy_info phy_info_rtl8211b = {
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
{miim_end,}
},
- (struct phy_cmd[]){ /* startup */
+ (struct phy_cmd[]) { /* startup */
/* Status is read once to clear old link state */
{MIIM_STATUS, miim_read, NULL},
/* Auto-negotiate */
@@ -1691,12 +1771,12 @@ struct phy_info phy_info_rtl8211b = {
{MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr},
{miim_end,}
},
- (struct phy_cmd[]){ /* shutdown */
+ (struct phy_cmd[]) { /* shutdown */
{miim_end,}
},
};
-struct phy_info *phy_info[] = {
+static struct phy_info *phy_info[] = {
&phy_info_cis8204,
&phy_info_cis8201,
&phy_info_BCM5461S,
@@ -1725,7 +1805,7 @@ struct phy_info *phy_info[] = {
* all of the known PHYs to see if one matches. If so, return
* it, if not, return NULL
*/
-struct phy_info *get_phy_info(struct eth_device *dev)
+static struct phy_info *get_phy_info(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
uint phy_reg, phy_ID;
@@ -1750,7 +1830,8 @@ struct phy_info *get_phy_info(struct eth_device *dev)
}
if (theInfo == &phy_info_generic) {
- printf("%s: No support for PHY id %x; assuming generic\n", dev->name, phy_ID);
+ printf("%s: No support for PHY id %x; assuming generic\n",
+ dev->name, phy_ID);
} else {
debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
}
@@ -1761,7 +1842,7 @@ struct phy_info *get_phy_info(struct eth_device *dev)
/* Execute the given series of commands on the given device's
* PHY, running functions as necessary
*/
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
+static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
{
int i;
uint result;
@@ -1863,10 +1944,10 @@ static int tsec_miiphy_write(char *devname, unsigned char addr,
static int
tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
{
- struct tsec_private *priv = privlist[1];
- volatile tsec_t *regs = priv->regs;
- volatile u32 *reg_array, value;
- u8 result, whichbit, whichreg;
+ struct tsec_private *priv = privlist[1];
+ volatile tsec_t *regs = priv->regs;
+ volatile u32 *reg_array, value;
+ u8 result, whichbit, whichreg;
result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
whichbit = result & 0x1f; /* the 5 LSB = which bit to set */
generated by cgit v1.1 at 2024-12-26 10:10:16 +0000